Tarek Mostafa Morsy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tarek Mostafa Morsy has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Amr Tarek Noufal
Department of Construction and Building Engineering, Arab Academy for Science, Technology & Maritime Transport, Alexandria P.O. Box 1029, Egypt
2 shared publications - Elbadr Mohamed Osman Elgendi
Construction and Building Engineering Department , Arab Academy for Science and Technology and Maritime Transport , Egypt
2 shared publications - Ahmed Ragheb
Department of Construction and Building Engineering, Arab Academy for Science, Technology and Maritime Transport (AASTM), Alexandria, Egypt
1 shared publication - Ashraf Nazir
Structural Engineering Department, Faculty of Engineering, Tanta University, Tanta, Egypt
1 shared publication - Gehad Saad
Department of Construction and Building Engineering, Arab Academy for Science, Technology and Maritime Transport (AASTM), Alexandria, Egypt
1 shared publication - Mohamed Sharaf
Institute of Natural Resources and Territorial Planning, University of Oviedo, 33600 Mieres, Spain
1 shared publication
Latest Publications
- Open Access
- 21 March 2026
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 13 (4) , 76
Predicting Collapse Settlement of Footing Due to Infiltration
This study introduces an approach for estimating the collapse settlement of footing as a result of downward infiltration affecting soils at shallow depths. The experimental tests were carried out, considering different parameters, to investigate the depth of the wetting and the distribution of water content at different depths. Based on the results, regression analysis was employed to propose mathematical formulas for predicting the depth of the wetting zone and the distribution of soil water content beneath the footing model for the entire depth. The finite element method was used to develop a numerical model that simulates the experimental results due to the infiltration of rainfall water. A good agreement among the laboratory results, the analytical results, and the numerical results was obtained indiating the reliability of the proposed approach.
- 21 March 2026
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 13 (4) , 76
Open AccessPredicting Collapse Settlement of Footing Due to Infiltration
This study introduces an approach for estimating the collapse settlement of footing as a result of downward infiltration affecting soils at shallow depths. The experimental tests were carried out, considering different parameters, to investigate the depth of the wetting and the distribution of water content at different depths. Based on the results, regression analysis was employed to propose mathematical formulas for predicting the depth of the wetting zone and the distribution of soil water content beneath the footing model for the entire depth. The finite element method was used to develop a numerical model that simulates the experimental results due to the infiltration of rainfall water. A good agreement among the laboratory results, the analytical results, and the numerical results was obtained indiating the reliability of the proposed approach.
- Open Access
Integration of Lab Experiments and Simulation for Evaluating Rubberized Asphalt Mixtures Containing Recycled Asphalt
Road paving costs have significantly increased in the last decades not only because of the increase in oil price globally, which has in turn increased the prices of bitumen, transportation, coarse aggregate and fine aggregate, but also due to the shortage of these virgin materials. Thus, it is essential to find more sustainable and cost-effective road paving solutions. This research focuses on the combination of recycled asphalt pavement (RAP) and crumb rubber extracted from end-life tires and new asphalt mixtures to assess the enhancement of asphalt performance and cost minimization. The optimal percentage of RAP mixed with new asphalt including crumb rubber with achieves the highest performance, stability, and durability of pavement, while considering the economic and environmental impacts was investigated. Experimental investigations, including a universal testing machine and the Marshall stability test, were implemented to evaluate different mixing percentages of RAP and the new asphalt including crumb rubber at different bitumen contents. Abaqus software was utilized to simulate a model with the new mixture to determine the stress and deformation characteristics under different loading conditions. The findings of the experimental study from testing more than 150 samples of asphalt with different percentages of mixing illustrated that a balanced mix of 50% RAP with 50% new rubberized asphalt with a 5% bitumen content achieved the optimal balance of stability, flow and density characteristics, which will offer a promising solution for more sustainable and cost-effective road-paving solutions.
Open AccessIntegration of Lab Experiments and Simulation for Evaluating Rubberized Asphalt Mixtures Containing Recycled Asphalt
Road paving costs have significantly increased in the last decades not only because of the increase in oil price globally, which has in turn increased the prices of bitumen, transportation, coarse aggregate and fine aggregate, but also due to the shortage of these virgin materials. Thus, it is essential to find more sustainable and cost-effective road paving solutions. This research focuses on the combination of recycled asphalt pavement (RAP) and crumb rubber extracted from end-life tires and new asphalt mixtures to assess the enhancement of asphalt performance and cost minimization. The optimal percentage of RAP mixed with new asphalt including crumb rubber with achieves the highest performance, stability, and durability of pavement, while considering the economic and environmental impacts was investigated. Experimental investigations, including a universal testing machine and the Marshall stability test, were implemented to evaluate different mixing percentages of RAP and the new asphalt including crumb rubber at different bitumen contents. Abaqus software was utilized to simulate a model with the new mixture to determine the stress and deformation characteristics under different loading conditions. The findings of the experimental study from testing more than 150 samples of asphalt with different percentages of mixing illustrated that a balanced mix of 50% RAP with 50% new rubberized asphalt with a 5% bitumen content achieved the optimal balance of stability, flow and density characteristics, which will offer a promising solution for more sustainable and cost-effective road-paving solutions.
- Open Access
- 11 November 2024
- Published by MDPI AG in Preprints.org
Integration of Lab Experiments and Simulation for Evaluating Rubberized Asphalt Mixtures Containing Recycled Asphalt
Road paving cost highly increased as a consequence of the increase of oil price globally on one hand which increased the price of bitumen, transportation, coarse aggregate and fine aggregate, and shortage of these virgin materials on the other hand globally, so it’s essential to find more sustainable and cost-effective road paving solutions, this research achieves the combination of recycled asphalt and crumb rubber, extracted from end life tires, into new asphalt mixtures to enhance the asphalt performance and reduce costs. This research focuses on finding the optimal percentage of mixing recycled asphalt with new asphalt including crumb rubber that achieves the highest performance, stability, and durability of pavement, while considering the economic and environmental impacts. The laboratory tests including universal machine test and Marshall stability test, were used to evaluate different mixing percentages of recycled asphalt and new asphalt including crumb rubber at different bitumen contents. The simulation which was made with Abaqus software was performed to determine the stress and deformation characteristics under different loading conditions. Results achieved by this research after testing more than 70 samples of asphalt with different percentages of mixing showed that the balanced mix of 50% mix of recycled asphalt with 50% new rubberized asphalt with 5% bitumen content achieved the optimal balance of stability, flow, density characteristics which will offer a promising solution for more sustainable and cost-effective road paving solutions.
- 11 November 2024
- Published by MDPI AG in Preprints.org
Open AccessIntegration of Lab Experiments and Simulation for Evaluating Rubberized Asphalt Mixtures Containing Recycled Asphalt
Road paving cost highly increased as a consequence of the increase of oil price globally on one hand which increased the price of bitumen, transportation, coarse aggregate and fine aggregate, and shortage of these virgin materials on the other hand globally, so it’s essential to find more sustainable and cost-effective road paving solutions, this research achieves the combination of recycled asphalt and crumb rubber, extracted from end life tires, into new asphalt mixtures to enhance the asphalt performance and reduce costs. This research focuses on finding the optimal percentage of mixing recycled asphalt with new asphalt including crumb rubber that achieves the highest performance, stability, and durability of pavement, while considering the economic and environmental impacts. The laboratory tests including universal machine test and Marshall stability test, were used to evaluate different mixing percentages of recycled asphalt and new asphalt including crumb rubber at different bitumen contents. The simulation which was made with Abaqus software was performed to determine the stress and deformation characteristics under different loading conditions. Results achieved by this research after testing more than 70 samples of asphalt with different percentages of mixing showed that the balanced mix of 50% mix of recycled asphalt with 50% new rubberized asphalt with 5% bitumen content achieved the optimal balance of stability, flow, density characteristics which will offer a promising solution for more sustainable and cost-effective road paving solutions.
- Open Access
- 7 December 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (24) , 1-14
Improvement of swelling soil by using lime sludge and sodium chloride
Construction on swelling soil is a major challenge to geotechnical engineers all around the world. This type of soil has a quite complex behavior as they undergo the category of problematic soils. The seasonal variations in the climate cause swelling and shrinkage, affecting soil’s water retention. The prediction of future climate change will worsen this problem, increasing the importance of the matter. The attention has been directed to experimental modeling and field investigations. In previous references, this problem was targeted by adding additives which are relatively expensive and non-environment friendly. In this study, waste and recycled materials are used in the lab to enhance the undesirable expansive soil characteristics to keep the environment clean and sustainable and reduce pollution. The additives are selected not only for its availability and cheapness but also to reduce the damage of environment due to disposal of waste. Therefore, the aim of study is to observe the behavior of expansive soils when mixing with various percentages of sodium chloride (NaCl) and lime sludge (LS). The percentages used in this work to determine the swelling properties of expansive soil were 1%, 2%, and 3% NaCl by weight with 3%, 6%, 9%, 10%, 12%, 15%, and 20% of LS by weight. The experimental tests held in the laboratory were liquid limit (LL), plastic limit (PL), free swell (FS), plasticity index (PI), swelling pressure, swelling and infiltration test, and physical models. The results show that by increasing the percentage of NaCl and LS, a significant improvement is obvious to the swelling properties of soils. Added to that, a decrease in PI of the swelling soil is clearly observed which reflects a decrease in swelling pressure and free swell of the swelling soil.
- 7 December 2022
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 15 (24) , 1-14
Open AccessImprovement of swelling soil by using lime sludge and sodium chloride
Construction on swelling soil is a major challenge to geotechnical engineers all around the world. This type of soil has a quite complex behavior as they undergo the category of problematic soils. The seasonal variations in the climate cause swelling and shrinkage, affecting soil’s water retention. The prediction of future climate change will worsen this problem, increasing the importance of the matter. The attention has been directed to experimental modeling and field investigations. In previous references, this problem was targeted by adding additives which are relatively expensive and non-environment friendly. In this study, waste and recycled materials are used in the lab to enhance the undesirable expansive soil characteristics to keep the environment clean and sustainable and reduce pollution. The additives are selected not only for its availability and cheapness but also to reduce the damage of environment due to disposal of waste. Therefore, the aim of study is to observe the behavior of expansive soils when mixing with various percentages of sodium chloride (NaCl) and lime sludge (LS). The percentages used in this work to determine the swelling properties of expansive soil were 1%, 2%, and 3% NaCl by weight with 3%, 6%, 9%, 10%, 12%, 15%, and 20% of LS by weight. The experimental tests held in the laboratory were liquid limit (LL), plastic limit (PL), free swell (FS), plasticity index (PI), swelling pressure, swelling and infiltration test, and physical models. The results show that by increasing the percentage of NaCl and LS, a significant improvement is obvious to the swelling properties of soils. Added to that, a decrease in PI of the swelling soil is clearly observed which reflects a decrease in swelling pressure and free swell of the swelling soil.