JPJiri Pavelec

Jiri Pavelec

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiri Pavelec has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CO on a Rh/Fe 3 O 4 single-atom catalyst: high-resolution infrared spectroscopy and near-ambient-pressure scanning tunnelling microscopy

    by Nail El Hocine Barama, Chunlei Wang, Panukorn Sombut, David Rath, Adam Lagin, Martin Ormoš, Lena Puntscher, Faith J. Lewis, Zdeněk Jakub, Florian Kraushofer, et al.

    A model Rh/Fe 3 O 4 (001) single-atom catalyst enables site-resolved assignment of CO stretching frequencies.


  • Open Access

    Wasserstoffaktivierung über Dihydrid‐Bildung an einem Rh 1 /Fe 3 O 4 (001)‐Einzelatomkatalysator

    by Chunlei Wang, Panukorn Sombut, Lena Puntscher, Nail Barama, Maosheng Hao, Florian Kraushofer, Jiri Pavelec, Matthias Meier, Florian Libisch, Michael Schmid, et al.

    ZUSAMMENFASSUNG: Die Wasserstoffaktivierung ist ein zentraler Schritt in der katalystischen Hydrierung. In der heterogenen Katalyse erfolgt sie üblicherweise über dissoziative Adsorption an Metall‐Nanopartikeln, gefolgt von Oberflächendiffusion oder Spillover. Im Gegensatz dazu aktivieren homogene Katalysatoren H 2 über Dihydrid‐ oder Dihydrogen‐Intermediate an einem einzelnen Metallzentrum. Wir zeigen hier, dasohne Spillover von atomarem Wasserstoff. Temperaturprogrammierte Desorption (TPD), Röntgenphotoelektronenspektroskopie (XPS) und Rastertunnelmikroskopie (STM) weisen gemeinsam eine starke (≈1 eV) Wasserstoffadsorption exklusiv an isolierten Rh 1 ‐Zentren nach; Isotopenaustauschexperimente belegen zudem, dass Wasserstoff dort lokalisiert bleibt. Rechnungen mit Dichtefunktionaltheorie (DFT) zeigen eine barrierefreie Umwandlung von molekularem H 2 zu Dihydrid, und Rechnungen auf Basis der Random‐Phase‐Approximation bestätigen die relative Stabilität des Dihydrids. Zusammengenommen zeigen diese Ergebnisse, dass Rh‐Einzelatom‐Zentren H 2 über einen Dihydrid‐Pfad spalten und binden, analog zu homogenen Komplexen, und damit die mechanistische Brücke zwischen homogener und heterogener Katalyse schlagen.

  • Open Access

    Hydrogen Activation via Dihydride Formation on a Rh 1 /Fe 3 O 4 (001) Single‐Atom Catalyst

    by Chunlei Wang, Panukorn Sombut, Lena Puntscher, Nail Barama, Maosheng Hao, Florian Kraushofer, Jiri Pavelec, Matthias Meier, Florian Libisch, Michael Schmid, et al.

    Hydrogen activation is a key elementary step in catalytic hydrogenation. In heterogeneous catalysis, it usually proceeds through dissociative adsorption on metal nanoparticles followed by surface diffusion or spillover, whereas homogeneous catalysts activate H 2 through dihydride or dihydrogen intermediates at a single metal center. Here, we show that isolated Rh adatoms supported on Fe 3 O 4 (001) activate hydrogen through formation of a stable dihydride species without atomic H spillover. Temperature‐programmed desorption, x‐ray photoelectron spectroscopy, and scanning tunneling microscopy collectively reveal strong (≈1 eV) hydrogen adsorption exclusively at isolated Rh 1 sites, while isotope‐exchange experiments further demonstrate that hydrogen remains localized. Density‐functional theory‐based calculations indicate a barrierless conversion from molecular H 2 to the dihydride, and random‐phase approximation calculations further confirm the relative stability of the dihydride. Together, these results show that single‐atom Rh sites cleave hydrogen through a dihydride pathway analogous to homogeneous complexes, establishing a mechanistic bridge between homogeneous and heterogeneous catalysis.


  • Open Access

    Revealing the Intricate Structure of Surface Phases of Methanol on In 2 O 3 (111)

    by Andreas Ziegler, Chiara I. Wagner, Hao Chen, Matthias A. Blatnik, Alexander Wolfram, Anne Brandmeier, Zdeněk Jakub, Michele Riva, Jiri Pavelec, Michael Schmid, et al.

    Research on sustainable energy has intensified to reduce greenhouse gas emissions, especially CO2. One promising strategy is the catalytic reduction of CO2 to methanol, and indium oxide (In2O3) has emerged as a highly efficient catalyst, with high turnover rates and selectivity. This work investigates methanol, the end product of CO2 reduction, and its interaction with the In2O3(111) surface. Utilizing an ultrahigh vacuum (UHV) environment, this study combines temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), noncontact atomic force microscopy (nc-AFM), scanning tunneling microscopy (STM), and density functional theory (DFT) calculations. The coverages investigated range from 1 to 12 methanol molecules per unit cell. The results are compared to water adsorption on In2O3(111), as the chemical behavior of both molecules is similar in many respects. At low coverage, the adsorption patterns and interactions with the In2O3(111) surface mirror those seen with water, including dissociative and molecular adsorption. The first three methanol molecules dissociate at specific sites within the surface unit cell, while molecular adsorption becomes favored for subsequent molecules at temperatures below 300 K. At the highest coverage (before multilayer adsorption) methanol and water exhibit distinct structures due to their differing hydrogen bonding capabilities.

  • Open Access

    Multi-technique characterization of rhodium gem-dicarbonyls on TiO 2 (110)

    by Moritz Eder, Faith J. Lewis, Johanna I. Hütner, Panukorn Sombut, Maosheng Hao, David Rath, Paul Ryan, Jan Balajka, Margareta Wagner, Matthias Meier, et al.

    The study investigates rhodium gem-dicarbonyls on titania with a multi-technique approach, using XPS, IR, DFT+ U , and scanning probe microscopy. The findings have important implications for the rapidly growing field of single atom catalysis.


  • Open Access

    Multi-Technique Characterization of Rhodium Gem-Dicarbonyls on TiO$_2$(110)

    by Moritz Eder, Faith J. Lewis, Johanna I. Hütner, Panukorn Sombut, Maosheng Hao, David Rath, Jan Balajka, Margareta Wagner, Matthias Meier, Cesare Franchini, et al.

    Gem-dicarbonyls of transition metals supported on metal (oxide) surfaces are common intermediates in heterogeneous catalysis. While infrared (IR) spectroscopy is a standard tool for detecting these species on applied catalysts, the ill-defined crystallographic environment of species observed on powder catalysts renders data interpretation challenging. In this work, we apply a multi-technique surface science approach to investigate rhodium gem-dicarbonyls on a single-crystalline rutile TiO$_2$(110) surface. We combine spectroscopy, scanning probe microscopy, and Density Functional Theory (DFT) to determine their location and coordination on the surface. IR spectroscopy shows the successful creation of gem-dicarbonyls on a titania single crystal by exposing deposited Rh atoms to CO gas, followed by annealing to 200-250 K. Low-temperature scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM) data reveal that these complexes are mostly aligned along the [001] crystallographic direction, corroborating theoretical predictions. Notably, x-ray photoelectron spectroscopy (XPS) data reveal multiple rhodium species on the surface, even when the IR spectra show only the signature of rhodium gem-dicarbonyls. As such, our results highlight the complex behavior of carbonyls on metal oxide surfaces, and demonstrate the necessity of multi-technique approaches for the adequate characterization of single-atom catalysts.

  • Open Access

    Infrared reflection absorption spectroscopy setup with incidence angle selection for surfaces of non-metals

    by David Rath, Vojtěch Mikerásek, Chunlei Wang, Moritz Eder, Michael Schmid, Ulrike Diebold, Gareth S. Parkinson, Jiří Pavelec

    Infrared Reflection Absorption Spectroscopy (IRAS) on dielectric single crystals is challenging because the optimal incidence angles for light–adsorbate interaction coincide with regions of low IR reflectivity. Here, we introduce an optimized IRAS setup that maximizes the signal-to-noise ratio for non-metals. This is achieved by maximizing light throughput and by selecting optimal incidence angles that directly impact the peak heights in the spectra. The setup uses a commercial Fourier transform infrared spectrometer and is usable in ultra-high vacuum (UHV). Specifically, the optical design features sample illumination and collection mirrors with a high numerical aperture inside the UHV system and adjustable apertures to select the incidence angle range on the sample. This is important for p-polarized measurements on dielectrics because the peaks in the spectra reverse the direction at the Brewster angle (band inversion). The system components are connected precisely via a single flange, ensuring long-term stability. We studied the signal-to-noise ratio (SNR) variation in p-polarized IRAS spectra for one monolayer of CO on TiO2(110) as a function of incidence angle range, where a maximum SNR of 70 was achieved at 4 cm−1 resolution in a measurement time of 5 min. The capabilities for s polarization are demonstrated by measuring one monolayer D2O adsorbed on a TiO2(110) surface, where a SNR of 65 was achieved at a peak height ΔR/R0 of 1.4 × 10−4 in 20 min.


  • Open Access

    CO‐induzierte Dimer‐Dissoziation verursacht Gem‐Dicarbonyl‐Bildung auf einem Einzelatom‐Katalysator‐Modell

    by Chunlei Wang, Panukorn Sombut, Lena Puntscher, Zdenek Jakub, Matthias Meier, Jiri Pavelec, Roland Bliem, Michael Schmid, Ulrike Diebold, Cesare Franchini, et al.

    Die Fähigkeit, mehrere Reaktanten an derselben aktiven Stelle zu koordinieren ist eine wichtige Voraussetzung für die breite Anwendbarkeit der Einzelatom‐Katalyse. Modellkatalysatoren sind ideal, um den Zusammenhang zwischen der Geometrie der aktiven Stelle und der Bindung der Reaktanten zu untersuchen, da die Struktur der Einkristalloberflächen genau bestimmt werden kann. Die Adsorbate können mit Hilfe der Rastertunnelmikroskopie (STM) abgebildet werden; dadurch sind direkte Vergleiche mit der Dichtefunktionaltheorie möglich. In dieser Studie verfolgen wir mit Hilfe von STM‐Bildsequenzen einzelne Rh 1 ‐Adatome und Rh 2 ‐Dimere auf Fe 3 O 4 (001), während CO bei Raumtemperatur dosiert wird. Die CO‐Adsorption auf Rh 1 ‐Adatomen führt ausschließlich zu stabilen Rh 1 CO‐Monocarbonylen, bei denen das Rh‐Atom die bevorzugte pseudo‐quadratisch planare Koordination erzielt. In geringem Maß bilden sich auch Rh 1 (CO) 2 Gem‐Dicarbonyl‐Adsorbate; diese entstehen jedoch ausschließlich durch das Aufbrechen von Rh 2 Dimeren; der Reaktionsweg führt über ein instabiles Rh 2 (CO) 3 Zwischenprodukt. Unsere Ergebnisse veranschaulichen, wie Minderheitenspezies, die für (über die Probenfläche mittelnde) Spektroskopie‐Methoden unsichtbar sind, eine wichtige Rolle in katalytischen Systemen spielen können, und zeigen, dass die Zersetzung von Dimeren oder kleinen Clustern ein Weg sein kann, um reaktive, metastabile Konfigurationen in der Einzelatom‐Katalyse zu erzeugen.

  • Open Access

    CO‐Induced Dimer Decay Responsible for Gem‐Dicarbonyl Formation on a Model Single‐Atom Catalyst

    by Chunlei Wang, Panukorn Sombut, Lena Puntscher, Zdenek Jakub, Matthias Meier, Jiri Pavelec, Roland Bliem, Michael Schmid, Ulrike Diebold, Cesare Franchini, et al.

    The ability to coordinate multiple reactants at the same active site is important for the wide‐spread applicability of single‐atom catalysis. Model catalysts are ideal to investigate the link between active site geometry and reactant binding, because the structure of single‐crystal surfaces can be precisely determined, the adsorbates imaged by scanning tunneling microscopy (STM), and direct comparisons made to density functional theory. In this study, we follow the evolution of Rh 1 adatoms and minority Rh 2 dimers on Fe 3 O 4 (001) during exposure to CO using time‐lapse STM at room temperature. CO adsorption at Rh 1 sites results exclusively in stable Rh 1 CO monocarbonyls, because the Rh atom adapts its coordination to create a stable pseudo‐square planar environment. Rh 1 (CO) 2 gem‐dicarbonyl species are also observed, but these form exclusively through the breakup of Rh 2 dimers via an unstable Rh 2 (CO) 3 intermediate. Overall, our results illustrate how minority species invisible to area‐averaging spectra can play an important role in catalytic systems, and show that the decomposition of dimers or small clusters can be an avenue to produce reactive, metastable configurations in single‐atom catalysis.


  • Open Access

    Formation and stability of Fe-rich terminations of the Fe3O4(001) surface

    by Oscar Gamba, Moritz Eder, Matthias Poglitsch, Jiri Pavelec, Panukorn Sombut, Matthias Meier, Ulrike Diebold, Michael Schmid, Gareth S Parkinson

    Understanding how the structure of iron oxide surfaces varies with their environment is essential for rationalizing their role in (geo-)chemistry and optimizing their application in modern technologies. In this paper, we create Fe-rich terminations of Fe3O4(001) by depositing iron directly onto the ‘subsurface cation vacancy’-reconstructed surface, which is the most stable surface under ultrahigh vacuum conditions. Scanning tunneling microscopy and x-ray photoelectron spectroscopy data reveal that the excess iron is initially accommodated as two-fold coordinated adatoms and later incorporates into the subsurface cation vacancies. As the coverage increases, small patches of the octahedral pair termination (also known as the ‘Fe dimer’ termination) nucleate, eventually covering the entire surface after the deposition of 2 iron atoms per (√2×√2)R45° unit cell. This conclusion effectively rules out some existing models for the termination and provides support for the model proposed by Rustad et al (Surface Science 432, L583-L588, 1999), highlighting the need for further theoretical work to complete the Fe3O4(001) surface phase diagram. The octahedral pair termination is found to be unstable above 523 K and upon exposure to molecular O2 because the excess iron atoms agglomerate to form small FeOx clusters.