SLSangick Lee

Sangick Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sangick Lee has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Life Cycle Assessments and Economic Analyses of Alternative Marine Fuels: Insights for Practical Strategies

    by Hyunyong Lee, Jinkwang Lee, Gilltae Roh, Sangick Lee, Choungho Choung, Hokeun Kang

    The growth of the global shipping industry has increased the interest in the environmental impact of this sector. The International Maritime Organization adopted the initial Greenhouse Gas strategy for reducing GHG emissions from ships at the 72nd Marine Environment Protection Committee in April 2018. In this study, we carried out a life cycle assessment of nine production pathways of alternative fuels, including LNG, ammonia, methanol, and biofuels, and conducted an economic analysis considering the life cycle carbon pricing of each fuel pathway. Our results indicate that biomass-based FT-diesel, e-methanol, and e-ammonia are the most environmentally friendly, with GHG reductions of 92%, 88.2%, and 86.6%, respectively. However, our net present value analysis of ship life cycle cost considering carbon price indicated that using those fuels would not be cost-effective during the target period of study. Sensitivity analysis was performed by changing the life cycle carbon pricing from the baseline scenario, and we investigated the approximate years for when these alternative fuels will become more cost-effective compared to conventional fossil fuels. Further, to provide practical implications for shipping stakeholders, we analysed the effect of blending the same kinds of fuels with different production pathways.


  • Open Access

    Application of Fatigue Damage Evaluation Considering Linear Hydroelastic Effects of Very Large Container Ships Using 1D and 3D Structural Models

    by Sang-Ick Lee, Seung-Hwan Boo, Beom-Il Kim

    Owing to the increasing size and speed of ships to ensure economic efficiency, the hydroelastic phenomena of the hull have emerged as an important factor to be considered in the evaluation of strength during the design stage of current ship building procedures. In this study, we established a method to evaluate fatigue strength with linear spring effects using a 1D (one-dimensional) beam model and a 3D (three-dimensional) global Finite Element (FE) model. Firstly, FSI (fluid–structure interaction) analysis was carried out using the 1D beam model of a 15,000 twenty equivalent unit (TEU) container ship. In this step, the method proposed was to calculate the stress RAO (Response Amplitude Operator) of the hot spot points using only the hull girder load from the beam model. Next, a modal superposition analysis was carried out using the 3D global FE model that was directly calibrated to the fatigue damage of the hot spot points. Based on these stress transfer functions with hydroelastic effects, spectral fatigue analysis was carried out, and the portion of linear springing effects in the fatigue damage was analyzed, respectively. These results were compared with the rigid-body-based results in the final design stage. Finally, the applicability of the proposed method at the actual design stage is discussed.


  • Open Access

    Effect of Parameters on Vapor Generation in Ship-to-Ship Liquefied Natural Gas Bunkering

    by Hyunyong Lee, Jungho Choi, Inchul Jung, Sangick Lee, Sangdeuk Yoon, Borim Ryu, Hokeun Kang

    Liquefied natural gas (LNG) is attracting increasing attention as an alternative fuel in the maritime sector, as it can reduce harmful emissions for compliance with stricter environmental regulations. Owing to this environmental advantage, the number of ships using LNG as a fuel is increasing; thus, the demand for ship-to-ship LNG bunkering is increasing. One of the challenges of ship-to-ship LNG bunkering is boil-off gas (BOG) management, as it is more difficult than normal BOG management. This study analyzed the influences of the parameters on vapor generation, including the temperature difference between the bunker tank and receiving tank, bunkering flow rate, insulation performance, and compositions. A model based on a typical bunkering system was established, and a dynamic simulation was conducted using a commercial process simulator, Aspen HYSYS. The results indicated that as the initial temperature of the receiving tank increased, the amount of vapor return increased proportionally. In addition, increasing the bunkering flow rate decreased the amount of heat entering through the pipes and tanks; however, the heat dissipated by the pump shaft power increased. Different LNG compositions in the bunker tank led to changes in the initial pressure of the bunker tank, influencing the vapor return and vapor generation in the receiving tank. Through a parametric study, it was found that the pressure of the tank is the most important factor in terms of vapor return and vapor generation. As such, a pressure control method was proposed for the tank, so as to reduce vapor generation and vapor return. With pressure control, the total amount of vapor return to the bunker tanks is reduced from 7392 to 3317 kg. The net vapor generation in the receiving tank is reduced by up to 4047 kg and the net vapor generation in the overall system is reduced by 16.2%.