Alla Eddine Benchikh Le Hocine
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alla Eddine Benchikh Le Hocine has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Sébastien Poncet
Mechanical Engineering Department Université de Sherbrooke Sherbrooke Quebec Canada
5 shared publications - Raymond Panneton
Université de Sherbrooke
3 shared publications - Tenon Charly Kone
Flight Research Laboratory, National Research Council Canada, URL: https://ror.org/04mte1k06
3 shared publications - Hachimi Fellouah
Department of Mechanical Engineering, Université de Sherbrooke 2500 Blvd. de l’Université, Sherbrooke Qc, J1K 2R1, Canada
2 shared publications - Maël Lopez
Department of Mechanical Engineering, École de Technologie Supérieure 1 , 1100 rue Notre-Dame Ouest, Montréal, Québec, H3C 1K3
2 shared publications - Thomas Dupont
Department of Mechanical Engineering, École de Technologie Supérieure 1 , 1100 rue Notre-Dame Ouest, Montréal, Québec, H3C 1K3
2 shared publications
Latest Publications
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Automatic design of an efficient forward-curved centrifugal blower using gradient-free approaches
This study presents the design of a high-efficiency forward-curved centrifugal blower (FCCB) using a fully automated optimization framework based on gradient-free methods. The framework integrates three open-source tools, including Salome for computer-aided design and mesh generation, OpenFOAM 8 for computational fluid dynamics (CFD) simulations, and Dakota for optimization, coupled through several Python scripts. Several gradient-free approaches, such as artificial neural network, efficient global optimization, Gaussian process (GP), and multivariate adaptive regression spline, are employed for the FCCB design. Eleven design variables related to both the impeller and the housing are selected to design the FCCB for maximum total efficiency ϵtot. In addition to the design process, a quadratic response surface is constructed to evaluate the influence of individual design variables and their interactions on the objective function, providing further insight into the FCCB design space. Turbulent flow within the FCCB is modeled using the Reynolds-averaged Navier–Stokes equations, closed with the k–ω shear stress transport model. In addition, unsteady simulations are performed for the optimized configuration to investigate the transient flow structures and provide further physical insight into the aerodynamic behavior of the FCCB. Based on the results, the GP model identified the most efficient FCCB design with ϵtot=59.1%, showing a negligible difference of 0.2% compared to CFD validation and a difference of 3.13% in the pressure rise compared to the experimental results at the design point. The flow field analysis demonstrates that the improved aerodynamic performance is primarily associated with a more uniform impeller discharge flow, a smoother circumferential pressure distribution, and a more organized flow field within the impeller–volute region.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Automatic design of an efficient forward-curved centrifugal blower using gradient-free approaches
This study presents the design of a high-efficiency forward-curved centrifugal blower (FCCB) using a fully automated optimization framework based on gradient-free methods. The framework integrates three open-source tools, including Salome for computer-aided design and mesh generation, OpenFOAM 8 for computational fluid dynamics (CFD) simulations, and Dakota for optimization, coupled through several Python scripts. Several gradient-free approaches, such as artificial neural network, efficient global optimization, Gaussian process (GP), and multivariate adaptive regression spline, are employed for the FCCB design. Eleven design variables related to both the impeller and the housing are selected to design the FCCB for maximum total efficiency ϵtot. In addition to the design process, a quadratic response surface is constructed to evaluate the influence of individual design variables and their interactions on the objective function, providing further insight into the FCCB design space. Turbulent flow within the FCCB is modeled using the Reynolds-averaged Navier–Stokes equations, closed with the k–ω shear stress transport model. In addition, unsteady simulations are performed for the optimized configuration to investigate the transient flow structures and provide further physical insight into the aerodynamic behavior of the FCCB. Based on the results, the GP model identified the most efficient FCCB design with ϵtot=59.1%, showing a negligible difference of 0.2% compared to CFD validation and a difference of 3.13% in the pressure rise compared to the experimental results at the design point. The flow field analysis demonstrates that the improved aerodynamic performance is primarily associated with a more uniform impeller discharge flow, a smoother circumferential pressure distribution, and a more organized flow field within the impeller–volute region.
- 1 April 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (4) , 3192-3203
Mass-spring model for a perforated periodic metamaterial in nonlinear regime
This study is interested in the nonlinear acoustic response of a metamaterial composed of a periodic array of single-perforation plates spaced by thin air cavities. An equivalent mass-spring model is adapted to predict the metamaterial acoustic response under high sound pressure levels. The increase in losses induced by the high level is considered by a quadratic law for the airflow resistivity in an effective fluid model. The airflow resistivity coefficients are determined from predictions by the computational fluid dynamics method at different flow velocities. The model is validated with impedance tube measurements for samples with different numbers of periodic unit cells and perforation sizes. The results show that the acoustic resistance of the metamaterial increases with increasing sound pressure levels, while the reactance is almost unchanged. The absorption peaks at low frequencies are more impacted by high sound pressure levels. A criterion based on the viscous characteristic frequency is proposed to determine the limit of the beginnings of the nonlinear material response. This limit is given by an acoustic Reynolds number, which depends on the frequency and perforation size. Experimentally, an absorption peak is observed, shifting to lower frequencies with increasing sound levels. A preliminary explanation of underlying mechanisms is provided.
- 1 April 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (4) , 3192-3203
Mass-spring model for a perforated periodic metamaterial in nonlinear regime
This study is interested in the nonlinear acoustic response of a metamaterial composed of a periodic array of single-perforation plates spaced by thin air cavities. An equivalent mass-spring model is adapted to predict the metamaterial acoustic response under high sound pressure levels. The increase in losses induced by the high level is considered by a quadratic law for the airflow resistivity in an effective fluid model. The airflow resistivity coefficients are determined from predictions by the computational fluid dynamics method at different flow velocities. The model is validated with impedance tube measurements for samples with different numbers of periodic unit cells and perforation sizes. The results show that the acoustic resistance of the metamaterial increases with increasing sound pressure levels, while the reactance is almost unchanged. The absorption peaks at low frequencies are more impacted by high sound pressure levels. A criterion based on the viscous characteristic frequency is proposed to determine the limit of the beginnings of the nonlinear material response. This limit is given by an acoustic Reynolds number, which depends on the frequency and perforation size. Experimentally, an absorption peak is observed, shifting to lower frequencies with increasing sound levels. A preliminary explanation of underlying mechanisms is provided.
- 1 February 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (2) , 1512-1522
Inertial effects on single-perforation plates resistivity at high flow rates: Computational fluid dynamics and experimental studies
This article is focused on the viscous and inertial effects on airflow resistivity of periodic arrays of single-perforation plates spaced by thin air cavities. Analyzing this effect would provide better insight into losses within the material, including additional losses due to increasing sound excitation levels. In this way, the material pressure drop is predicted by computational fluid dynamics function (CFD) of the flow rate for corresponding pore Reynolds numbers between 0.3 and 1500. The static airflow resistivity coefficient is determined by the linear part of the pressure drop (viscous effect) and the Forchheimer coefficient from the nonlinear part of the pressure drop (inertial effect). Both coefficients are determined on the entirety of the material (globally) and at the plate levels (locally). Good agreement is observed between CFD predictions and experimental measurements on the whole range of studied Reynolds numbers. By locally investigating the pressure drops, the observations show that the viscous effects are constant through the material. With increasing pore Reynolds number, inertial effects of the first plate dominate over those of the other plates. The consideration of the local inertial effect will be a key component in the acoustic modeling of this type of material under high sound excitation levels.
- 1 February 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (2) , 1512-1522
Inertial effects on single-perforation plates resistivity at high flow rates: Computational fluid dynamics and experimental studies
This article is focused on the viscous and inertial effects on airflow resistivity of periodic arrays of single-perforation plates spaced by thin air cavities. Analyzing this effect would provide better insight into losses within the material, including additional losses due to increasing sound excitation levels. In this way, the material pressure drop is predicted by computational fluid dynamics function (CFD) of the flow rate for corresponding pore Reynolds numbers between 0.3 and 1500. The static airflow resistivity coefficient is determined by the linear part of the pressure drop (viscous effect) and the Forchheimer coefficient from the nonlinear part of the pressure drop (inertial effect). Both coefficients are determined on the entirety of the material (globally) and at the plate levels (locally). Good agreement is observed between CFD predictions and experimental measurements on the whole range of studied Reynolds numbers. By locally investigating the pressure drops, the observations show that the viscous effects are constant through the material. With increasing pore Reynolds number, inertial effects of the first plate dominate over those of the other plates. The consideration of the local inertial effect will be a key component in the acoustic modeling of this type of material under high sound excitation levels.
- 1 November 2024
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 156 (5) , 2928-2934
Prediction of the sound transmission loss of shape-varied sonic crystals: A transfer matrix approach
This paper proposes a transfer matrix method (TMM) for modeling sonic crystals to predict the transmission loss of noise exiting an air extraction system. Because the crystals may be of different shapes (e.g., square, circular, or standardized airfoil profile to minimize airflow resistance) and must account for thermo-viscous losses, a discrete version of the TMM is used. Similar to the finite element method, a discretization of the geometry is first performed. Each element is modeled with a transfer matrix (TM) that includes the local thermo-viscous losses which attenuate the sound wave. For each element in parallel, the parallel TMM is employed. For the subsequently created elements in series, the classic TMM is used. This generates a global TM from which the sound transmission loss of the crystal network is deduced. The predictions obtained by the proposed method are compared to measurements in an acoustic tube for three different shapes of sonic crystals. The results show that a geometric tortuosity correction is necessary for the predicted bandgap center frequency to match the measurement. A correction is proposed, but this requires a possible refinement for more complicated profiles.
- 1 November 2024
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 156 (5) , 2928-2934
Prediction of the sound transmission loss of shape-varied sonic crystals: A transfer matrix approach
This paper proposes a transfer matrix method (TMM) for modeling sonic crystals to predict the transmission loss of noise exiting an air extraction system. Because the crystals may be of different shapes (e.g., square, circular, or standardized airfoil profile to minimize airflow resistance) and must account for thermo-viscous losses, a discrete version of the TMM is used. Similar to the finite element method, a discretization of the geometry is first performed. Each element is modeled with a transfer matrix (TM) that includes the local thermo-viscous losses which attenuate the sound wave. For each element in parallel, the parallel TMM is employed. For the subsequently created elements in series, the classic TMM is used. This generates a global TM from which the sound transmission loss of the crystal network is deduced. The predictions obtained by the proposed method are compared to measurements in an acoustic tube for three different shapes of sonic crystals. The results show that a geometric tortuosity correction is necessary for the predicted bandgap center frequency to match the measurement. A correction is proposed, but this requires a possible refinement for more complicated profiles.
- 22 January 2022
- Published by Elsevier in Applied Thermal Engineering
- Vol. 206, 118057
Numerical analysis of the thermoaeraulic behavior of air during the opening of the door of a refrigerated truck trailer equipped with cold plates
- 22 January 2022
- Published by Elsevier in Applied Thermal Engineering
- Vol. 206, 118057
Numerical analysis of the thermoaeraulic behavior of air during the opening of the door of a refrigerated truck trailer equipped with cold plates
- 1 November 2021
- Published by Elsevier in Building and Environment
- Vol. 205
CFD modeling and optimization by metamodels of a squirrel cage fan using OpenFoam and Dakota: Ventilation applications
- 1 November 2021
- Published by Elsevier in Building and Environment
- Vol. 205
CFD modeling and optimization by metamodels of a squirrel cage fan using OpenFoam and Dakota: Ventilation applications
- Open Access
- 1 September 2020
- Published by Robertson Library, University of Prince Edward Island
Numerical Simulation of the Capture Efficiency of a Domestic Range Hood for Different Burner Scenarios
- 1 September 2020
- Published by Robertson Library, University of Prince Edward Island
Open AccessNumerical Simulation of the Capture Efficiency of a Domestic Range Hood for Different Burner Scenarios
- 6 October 2018
- Published by Springer Nature in Environmental Fluid Mechanics
- Vol. 19 (2) , 435-456
Turbulent flow over a D-section bluff body: a numerical benchmark
- 6 October 2018
- Published by Springer Nature in Environmental Fluid Mechanics
- Vol. 19 (2) , 435-456
Turbulent flow over a D-section bluff body: a numerical benchmark