JLJinze Li

Jinze Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinze Li has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers

    A Unified Family of High‐Order Energy‐Conserving Time Integrators for Nonlinear Dynamical Problems

    by Jinze Li, Yaokun Liu, Hua Li, Naigang Cui, Kaiping Yu

    This paper develops a family of energy‐conserving time integration methods for nonlinear conservative dynamical problems. Constructed within a unified, self‐starting, and single‐solve integration framework, the proposed methods avoid multi‐stage or sub‐step procedures, leading to improved computational efficiency while maintaining robust accuracy. By using a nonlinear conservative single‐degree‐of‐freedom system as a benchmark, the proposed framework systematically derives the conditions under which higher‐order consistency in conserving the total energy can be achieved. Three implicit integrators, called IA1‐L, IA1‐O, and IA1‐E, are designed to minimize the local truncation error in displacement, overshoot at the first time step, and total energy error at the first time step, respectively. These three schemes are unconditionally stable and controllably dissipative, and exhibit third‐order consistency in total energy conservation. To further enhance the accuracy in acceleration and total energy conservation, two identically second‐order accurate implicit and explicit schemes, IA2 and EA2, are constructed to achieve fourth‐order consistency in conserving the total energy. A range of numerical examples, including two linear multi‐degree‐of‐freedom problems, a two‐dimensional scalar wave propagation problem, the simple pendulum with distinct initial conditions, hardening/softening elastic springs, and the swinging wire rope with large‐deformation and large‐rotation, are solved and compared. The results demonstrate that the proposed methods significantly outperform the existing schemes, such as TPO/G‐ and EG‐, especially in terms of total energy conservation. Moreover, for spatially discretized nonlinear problems, introducing moderate numerical dissipation further improves energy conservation and numerical stability. Overall, the proposed methods provide some efficient implicit and explicit procedures for simulating nonlinear dynamics with energy‐conserving requirements.


  • Supersonic Panel Flutter Analysis by Using the Polygonal Finite Element Method

    by Shaokun Chen, Jinze Li, Rui Zhao, Jie Zhao, Kaiping Yu

    This paper presents a supersonic panel flutter analysis framework based on a polygonal finite element method (PFEM). The proposed approach builds upon a generalized Reissner–Mindlin plate formulation for arbitrary polygonal meshes, employing two types of barycentric shape functions (Wachspress and piecewise-linear) and incorporating an assumed strain field along polygon edges. This effectively mitigates transverse shear locking at thin-plate limits. The formulation is unified for triangular, quadrilateral, and polygonal meshes, ensuring versatility in spatial discretization. For flutter analysis, aerodynamic loads are modeled via first-to-third-order piston theories. Linear flutter boundaries are determined using the V–g and p–k methods, while nonlinear responses are investigated through time-domain analysis. Numerical examples validate the effectiveness of the proposed element, demonstrating that the Wachspress shape function yields superior results. The key contribution lies in the integration of a compact polygonal plate element framework with supersonic aerodynamic models, enabling accurate and efficient flutter predictions across diverse mesh topologies.

  • Open Access

    Two self-starting single-solve third-order explicit integration algorithms for second-order nonlinear dynamics

    by Liu Yaokun, Li Jinze, Yu Kaiping

    The single-step explicit time integration methods have long been valuable for solving large-scale nonlinear structural dynamic problems, classified into single-solve and multi-sub-step approaches. However, no existing explicit single-solve methods achieve third-order accuracy. The paper addresses this gap by proposing two new third-order explicit algorithms developed within the framework of self-starting single-solve time integration algorithms, which incorporates 11 algorithmic parameters. The study reveals that fully explicit methods with single-solve cannot reach third-order accuracy for general dynamic problems. Consequently, two novel algorithms are proposed: Algorithm 1 is a fully explicit scheme that achieves third-order accuracy in displacement and velocity for undamped problems; Algorithm 2, which employs implicit treatment of velocity and achieves third-order accuracy for general dynamic problems. Across a suite of both linear and nonlinear benchmarks, the new algorithms consistently outperform existing single-solve explicit methods in accuracy. Their built-in numerical dissipation effectively filters out spurious high-frequency components, as demonstrated by two wave propagation problems. Finally, when applied to the realistic engineering problem, both of them deliver superior numerical precision at minimal computational cost.

  • Open Access

    Study on the Dynamic Magnification Effect of Structure Stiffness Based on the Gust Coupling Analysis of Civil Aircraft

    by Yingying Liu, Kaiping Yu, Jinze Li

    Regarding the dynamic magnification effect of structure stiffness on the gust analysis of civil aircraft, the following three methods are presented: rigid modes analysis, secondary processing based on elastic modes, and analysis with enlarged stiffness. These methods provide consistent gust load and address the challenge of extracting internal gust loads of rigid aircraft. The coupling resonant effects of the inertial force, the aerodynamic force, and the gust-induced aerodynamic force at different frequencies are examined. The response of flexible aircraft is nonlinearly related to frequency. It exhibits a significant increase in the inertial force and the aerodynamic force at higher frequencies, while a quasi-rigid response at very low frequencies shows the importance of sufficient analysis time. In addition, compared with rigid aircraft, flexible aircraft experiences a delay in the occurrence of extreme gust loads with the delay interval proportional to the frequency. The maximum gust load of flexible aircraft under a certain range of frequencies exceeds that of rigid aircraft, although this is not necessarily the case at the specific frequency. The dynamic magnification factor is 1.25 for the model in this study, which is almost constant and reaches its maximum value together with the gust loads when the frequency coincides with the frequency of the first bending mode.

  • Novel Implicit Integration Algorithms With Identical Second‐Order Accuracy and Flexible Dissipation Control for First‐Order Transient Problems

    by Jinze Li, Naigang Cui, Yijun Zhu, Kaiping Yu

    For the solutions of first‐order transient problems with optimal efficiency, conventional single‐step implicit methodologies, unaided by additional post‐processing techniques, encounter limitations in concurrently attaining identical second‐order accuracy and controllable numerical dissipation. Addressing this challenge, the present study contributes not only a comprehensive analytical framework for formulating implicit integration algorithms but also leverages the auxiliary variable and the composite sub‐step technique to propose two distinct types of implicit integration algorithms. Each type is characterized by self‐initiation, unconditional stability, identical second‐order accuracy, controllable numerical dissipation, and zero‐order overshoots. Recognizing that single‐step implicit methods can be conceptualized as composite single‐sub‐step ones, both algorithm types achieve identical effective stiffness matrices, thereby reducing the computational effort for solving linear problems. The utilization of auxiliary variables endows the proposed single‐step method with numerical attributes akin to established counterparts, while achieving identical second‐order accuracy. Conversely, the adoption of the composite sub‐step technique in the proposed two‐sub‐step methods surpasses the published algorithms by significantly reducing the error constants. This superiority persists when enforcing the same sub‐step sizes and sub‐step dissipation levels. Numerical simulations affirm that the proposed methods consistently outperform existing alternatives without incurring additional computational expenses.


  • Dynamic topology optimization considering the influence of the non‐uniform temperature field

    by Li‐Hao Zhang, Jinze Li, Rui Zhao, Kaiping Yu

    With the wide application of thermoelastic structures in industries such as the aerospace field, the problem of topology optimization of thermoelastic structures has become a very common and important research topic. It is well known that the thermal environment has a non‐negligible influence on the dynamic performance of structures. However, few people consider the influence of the thermal environment on structural stiffness in thermoelastic dynamic topology optimization. In practical engineering applications, the influence of the environment on the structure performance should be considered to obtain the optimal structure. In this paper, we focus on the problem of dynamic topology optimization considering the effect of non‐uniform temperature fields on structural stiffness. The influence of non‐uniform temperature fields adds on structural stiffness to the topology optimization of thermoelastic dynamic for the first time, thereby comprehensively addressing its effects on structural stiffness in the context of dynamic topology optimization under harmonic vibration and transient load. The proposed method begins by computing the distribution of the non‐uniform temperature field within the structure. Subsequently, thermal stresses in the structure are determined through the application of thermoelastic theory. The geometric stiffness matrix of the structure is then calculated using finite element theory. The dynamic topology optimization model, employing a variable density approach, is established in conjunction with the dynamic compliance design objective. Sensitivity analysis is conducted through the adjoint method, and the design variables are updated utilizing the method of moving asymptotes. Numerical examples are presented to validate the efficacy of the proposed method and obtain the influence of different factors on the optimization results. The results show that the dynamic compliance of the optimized structure increases with increasing heat flux. For the optimization under harmonic vibration, the optimization results obtained by different external excitation frequencies are significantly different. For transient optimization, the study discovers that the optimization present transient effect.


  • Directly Self-Starting Second-Order Explicit Integration Methods with Dissipation Control and Adjustable Bifurcation Points for Second-Order Initial Value Problems

    by Jinze Li, Naigang Cui, Hua Li, Yiwei Lian, Kaiping Yu, Rui Zhao

    This paper proposes a directly self-starting second-order [ ]-sub-step explicit method, within which the three novel members are developed and analyzed for demonstration. The novel explicit schemes can output second-order accelerations for general structures, which cannot be achieved for the directly self-starting single- and two-sub-step algorithms. Each explicit algorithm achieves controllable algorithmic dissipation and adjustable bifurcation points. As a result, the novel explicit algorithms impose two algorithmic parameters, [ ] and [ ], to control numerical dissipation and bifurcation point, respectively. The parameter [ ], denoting the spectral radius at the bifurcation point, controls numerical dissipation, whereas the parameter [ ], denoting the bifurcation point, adjusts the amount of dissipation imposed in the low-frequency range. This paper provides users with two recommended selections of [ ]. Apart from these desirable features, each novel explicit algorithm attains the maximum stability bound, [ ] where [ ] denotes the number of sub-steps. The four- and five-sub-step algorithms perform optimization to reduce numerical low-frequency dissipation. As the number of sub-steps increases, the novel explicit algorithms can have better numerical characteristics without an increase in the computational effort. Numerical examples are simulated to validate the performance and superiority of the novel explicit algorithms.