Maryam Rasool
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maryam Rasool has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Abdul Rauf
Department of Electrical Engineering, National University of Sciences and Technology, H-12, Islamabad 44000, Pakistan
2 shared publications Farooq Ahmed Bhatti
Department of Electrical Engineering, Military College of Signals, National University of Sciences and Technology (NUST), Islamabad, Pakistan
2 shared publicationsImran Rashid
Department of Electrical Engineering, Military College of Signals, National University of Sciences and Technology (NUST), Islamabad, Pakistan
2 shared publicationsAbdullah Zafar
Department of Electrical Engineering, Military College of Signals National University of Sciences and Technology (NUST) Islamabad Pakistan
1 shared publicationAdil Masood
Department of Electrical Engineering, Military College of Signals, National University of Sciences and Technology (NUST), Islamabad, Pakistan
1 shared publicationAdil Masood Siddiqui
National University of Sciences and Technology Islamabad Pakistan
1 shared publication
Latest Publications
- Open Access
- 15 September 2026
- Published by Wiley in Concurrency and Computation: Practice and Experience
- Vol. 38 (18) , e70935
FedGATE: Topology‐Aware Personalized Federated Learning With Utility and Carbon‐Aware Scheduling for Mobile Traffic Prediction
Accurate mobile traffic prediction is important for proactive resource allocation, congestion management, and service assurance in fifth‐generation and emerging sixth‐generation networks. Centralized deep‐learning approaches can provide strong forecasting performance but require raw traffic data to be transferred to a common server, creating privacy, communication, and energy concerns. Federated learning (FL) avoids centralized data collection; however, Federated Averaging (FedAvg) is sensitive to non‐independent and identically distributed (non‐IID) traffic patterns and does not explicitly exploit relationships among clients. This paper presents FedGATE, a cross‐silo personalized FL framework that integrates server‐side topology‐aware aggregation, private client‐specific prediction heads, and utility and carbon‐aware participation scheduling. The server aggregates only shared‐backbone updates using graph‐constrained attention over related clients, while each client retains its prediction head locally. The scheduler adjusts participation frequency according to estimated update utility, resource cost, staleness, and carbon intensity. FedGATE is evaluated on the Telecom Italia Milan cellular traffic dataset, Edge‐IIoTset, and CIC‐IoT2023 over ten random seeds. Relative to FedAvg, FedGATE reduces mean absolute error (MAE) by approximately 8% on Milan and 20% on Edge‐IIoTset, while remaining statistically comparable to centralized training on Milan. On the Milan dataset, it reduces communication volume by approximately 37% and estimated training energy by approximately 23%. Carbon‐aware scheduling further lowers estimated carbon dioxide emissions by approximately 7% relative to the non‐carbon‐aware FedGATE variant, without a statistically significant increase in MAE. These results indicate that topology‐aware aggregation, local personalization, and resource‐aware scheduling can be integrated to improve forecasting accuracy and training efficiency in heterogeneous mobile‐network environments.
- 15 September 2026
- Published by Wiley in Concurrency and Computation: Practice and Experience
- Vol. 38 (18) , e70935
Open AccessFedGATE: Topology‐Aware Personalized Federated Learning With Utility and Carbon‐Aware Scheduling for Mobile Traffic Prediction
Accurate mobile traffic prediction is important for proactive resource allocation, congestion management, and service assurance in fifth‐generation and emerging sixth‐generation networks. Centralized deep‐learning approaches can provide strong forecasting performance but require raw traffic data to be transferred to a common server, creating privacy, communication, and energy concerns. Federated learning (FL) avoids centralized data collection; however, Federated Averaging (FedAvg) is sensitive to non‐independent and identically distributed (non‐IID) traffic patterns and does not explicitly exploit relationships among clients. This paper presents FedGATE, a cross‐silo personalized FL framework that integrates server‐side topology‐aware aggregation, private client‐specific prediction heads, and utility and carbon‐aware participation scheduling. The server aggregates only shared‐backbone updates using graph‐constrained attention over related clients, while each client retains its prediction head locally. The scheduler adjusts participation frequency according to estimated update utility, resource cost, staleness, and carbon intensity. FedGATE is evaluated on the Telecom Italia Milan cellular traffic dataset, Edge‐IIoTset, and CIC‐IoT2023 over ten random seeds. Relative to FedAvg, FedGATE reduces mean absolute error (MAE) by approximately 8% on Milan and 20% on Edge‐IIoTset, while remaining statistically comparable to centralized training on Milan. On the Milan dataset, it reduces communication volume by approximately 37% and estimated training energy by approximately 23%. Carbon‐aware scheduling further lowers estimated carbon dioxide emissions by approximately 7% relative to the non‐carbon‐aware FedGATE variant, without a statistically significant increase in MAE. These results indicate that topology‐aware aggregation, local personalization, and resource‐aware scheduling can be integrated to improve forecasting accuracy and training efficiency in heterogeneous mobile‐network environments.
- 5 March 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (5) , e202500841
Applications of Metasurfaces in Beam Steering Systems
Recently, an innovative technology of modified structures known as metasurfaces has emerged targeting numerous applications specially in the field of beam steering. These structures are compact, lightweight, and are capable of offering highly tunable solutions for electromagnetic wave manipulation. The primary approaches to achieve beam steering using metasurfaces can be divided into passive designs that utilize fixed phase gradients, tunable systems consisting of varactors or liquid crystals, and active methods incorporating electronic elements or optical control for dynamic reconfiguration. Metasurfaces can be developed and designed using a variety of different techniques and methods. Printed circuit board (PCB) metasurfaces are significant due to cost effective fabrication, mechanical stability and ease of integration with other electronic components. Dielectric based metasurfaces offer low loss operation as well as high efficiency along with high phase control capability. 3D‐printed metasurfaces are notable due to their ability to construct complex, detailed, and customizable geometries with swift prototyping, enabling low cost and scalable fabrication of advanced electromagnetic structures for numerous applications. Another noteworthy class of metasurfaces is constituted by fluid based and advanced material based metasurfaces. Such metasurfaces can manipulate the electromagnetic waves using the concepts of reconfigurability and adaptability. This review explores different metasurface design technologies in detail, with emphasis on the advantages, limitations as well as future research directions targeting beam steam steering applications, offered by these techniques.
- 5 March 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (5) , e202500841
Applications of Metasurfaces in Beam Steering Systems
Recently, an innovative technology of modified structures known as metasurfaces has emerged targeting numerous applications specially in the field of beam steering. These structures are compact, lightweight, and are capable of offering highly tunable solutions for electromagnetic wave manipulation. The primary approaches to achieve beam steering using metasurfaces can be divided into passive designs that utilize fixed phase gradients, tunable systems consisting of varactors or liquid crystals, and active methods incorporating electronic elements or optical control for dynamic reconfiguration. Metasurfaces can be developed and designed using a variety of different techniques and methods. Printed circuit board (PCB) metasurfaces are significant due to cost effective fabrication, mechanical stability and ease of integration with other electronic components. Dielectric based metasurfaces offer low loss operation as well as high efficiency along with high phase control capability. 3D‐printed metasurfaces are notable due to their ability to construct complex, detailed, and customizable geometries with swift prototyping, enabling low cost and scalable fabrication of advanced electromagnetic structures for numerous applications. Another noteworthy class of metasurfaces is constituted by fluid based and advanced material based metasurfaces. Such metasurfaces can manipulate the electromagnetic waves using the concepts of reconfigurability and adaptability. This review explores different metasurface design technologies in detail, with emphasis on the advantages, limitations as well as future research directions targeting beam steam steering applications, offered by these techniques.
- 31 May 2021
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 35 (15) , 2062-2077
A multi-slotted 2-element quadband MIMO antenna for 4G and 5G applications
This paper presents design of a multi-slotted quadband 2-element MIMO antenna suitable for 4G and 5G applications. The design is realized on an 18.5 × 56 mm2 (0.154 × 0.467 , where is the wavelength of the lowest resonant frequency of 2.5 GHz) FR4 epoxy substrate having a thickness of 1.6 mm and a relative permittivity of 4.4. The simulated and measured results agree well with each other. A simple de-coupler structure has been incorporated on the bottom side to reduce the mutual coupling at operating frequency bands (2.5, 3.7, 4.3, and 5.5 GHz). Furthermore, it was observed that the measured envelope correlation coefficient of the designed MIMO antenna is considerably lower than 0.05. Also, the design exhibits measured gains of 3.49, 2.97, 2.93, and 2.54 dBi at 2.5, 3.7, 4.3, and 5.5 GHz, respectively.- 31 May 2021
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 35 (15) , 2062-2077
A multi-slotted 2-element quadband MIMO antenna for 4G and 5G applications
This paper presents design of a multi-slotted quadband 2-element MIMO antenna suitable for 4G and 5G applications. The design is realized on an 18.5 × 56 mm2 (0.154 × 0.467 , where is the wavelength of the lowest resonant frequency of 2.5 GHz) FR4 epoxy substrate having a thickness of 1.6 mm and a relative permittivity of 4.4. The simulated and measured results agree well with each other. A simple de-coupler structure has been incorporated on the bottom side to reduce the mutual coupling at operating frequency bands (2.5, 3.7, 4.3, and 5.5 GHz). Furthermore, it was observed that the measured envelope correlation coefficient of the designed MIMO antenna is considerably lower than 0.05. Also, the design exhibits measured gains of 3.49, 2.97, 2.93, and 2.54 dBi at 2.5, 3.7, 4.3, and 5.5 GHz, respectively.- 23 October 2019
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 34 (9) , 1225-1238
A novel UWB MIMO antenna array with band notch characteristics using parasitic decoupler
This paper presents a 4 × 4 multiple-input–multiple-output (MIMO) antenna array for ultra-wide band (UWB) applications with 5.5 GHz wireless local area network (WLAN) band rejection characteristics. The single UWB antenna element consists of modified patch antenna with partial ground plane. WLAN band has been rejected by etching a U-shaped slot in the antenna element. The antenna elements have been arranged in a planar geometry where each element is orthogonal to its adjacent element. A fan-shaped parasitic decoupler, that consists of four strip lines connected with a central square-shaped conductor, is placed among the antenna elements. The dimensions of the antenna array are 67 × 67 × 1.6 mm3. Full wave simulations and experiments have been conducted where measured peak gain and average isolation were 8.1 and −20 dB, respectively. The calculated envelop correction coefficient was less than 0.01.
- 23 October 2019
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 34 (9) , 1225-1238
A novel UWB MIMO antenna array with band notch characteristics using parasitic decoupler
This paper presents a 4 × 4 multiple-input–multiple-output (MIMO) antenna array for ultra-wide band (UWB) applications with 5.5 GHz wireless local area network (WLAN) band rejection characteristics. The single UWB antenna element consists of modified patch antenna with partial ground plane. WLAN band has been rejected by etching a U-shaped slot in the antenna element. The antenna elements have been arranged in a planar geometry where each element is orthogonal to its adjacent element. A fan-shaped parasitic decoupler, that consists of four strip lines connected with a central square-shaped conductor, is placed among the antenna elements. The dimensions of the antenna array are 67 × 67 × 1.6 mm3. Full wave simulations and experiments have been conducted where measured peak gain and average isolation were 8.1 and −20 dB, respectively. The calculated envelop correction coefficient was less than 0.01.
- 24 April 2018
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 60 (6) , 1454-1459
A compact open complementary split ring resonator inspired triband reconfigurable coplanar waveguide fed antenna
This paper presents the implementation of open complimentary split ring resonator (OCSRR) structure in small rectangular radiating elements to achieve triple band and dual band reconfigurability using PIN diode. The proposed design is a coplanar waveguide fed structure and consists of three small radiating elements, whereas two OCSRR structures are coupled with the two‐radiating elements. The third radiating element embedded with OCSRR is connected using a PIN diode. Under DC biasing conditions the whole design resonates at three frequencies, that is, , , and , whereas the proposed design switches to dual band operation at and in the diode ‘OFF’ state. The proposed structure is designed and fabricated on a single sided ungrounded FR substrate. Overall, a good agreement between simulated and measured results is observed. It is also observed that the radiation patterns of the proposed antenna are the same with gains of , , and at , and in the PIN diode ‘ON’ state, respectively, whereas in the diode ‘OFF’ state, at the gain is and at the gain is .
- 24 April 2018
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 60 (6) , 1454-1459
A compact open complementary split ring resonator inspired triband reconfigurable coplanar waveguide fed antenna
This paper presents the implementation of open complimentary split ring resonator (OCSRR) structure in small rectangular radiating elements to achieve triple band and dual band reconfigurability using PIN diode. The proposed design is a coplanar waveguide fed structure and consists of three small radiating elements, whereas two OCSRR structures are coupled with the two‐radiating elements. The third radiating element embedded with OCSRR is connected using a PIN diode. Under DC biasing conditions the whole design resonates at three frequencies, that is, , , and , whereas the proposed design switches to dual band operation at and in the diode ‘OFF’ state. The proposed structure is designed and fabricated on a single sided ungrounded FR substrate. Overall, a good agreement between simulated and measured results is observed. It is also observed that the radiation patterns of the proposed antenna are the same with gains of , , and at , and in the PIN diode ‘ON’ state, respectively, whereas in the diode ‘OFF’ state, at the gain is and at the gain is .