BIBashar Issa

Bashar Issa

*This is an algorithmically generated author record based on publicly available information.

Bashar Issa has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The role of multi-phase metal content in corrosion and premature failure mitigation of steel equipment in oil refiniers. Part 2

    by B. Issa, V. Yu. Bazhin, K. G. Karapetyan

    The damage caused by crude oil impurities is in no way proportional to their small amounts, because there is an integrated system based on chemical composition and structure, chemical and electrochemical nature of corrosion processes, as well as sequence and synchronization between various damage mechanisms. Study of the influence of the heterogeneous metal content of the organic phase or steel matrix on premature failure of steel coils and equipment in oil refineries due to its aggressive role in corrosion processes allows us to reach certain rate-limiting stages of corrosion, which can help us describe better solutions to protect them against corrosion and premature failure. Industrial problems at which multiple sciences intersect represent challenging research tasks. On the other hand, solving them is as difficult as it is, as much as it adds wider interconnection between the various sectors of science, which would provide a clearer and deeper understanding to the problems faced by researchers that contributes to a multidimensional scientific-industrial development.


  • Open Access

    Influence of heat treatment on the microstructure of steel coils of a heating tube furnace

    by Vladimir Bazhin, Bashar Issa

    Transportation and refining of heavy metal-bearing oil are associated with the problems of localized destruction of metal structures and elements due to corrosion. In the process of equipment operation, it was revealed that premature failure of steel coils of heating tube furnaces at oil refineries and petrochemical plants was associated with insufficient strength and corrosion resistance of the steelwork. The study of the effect that structure and phase composition of 15KH5M-alloy steel elements of heating furnaces at oil refineries have on the corrosion properties, associated with mass loss and localized destructions in the process of heat treatment, allows to develop protective measures and determine heating modes with a rate-limiting step of oxidation. The rate of various corrosion types of 15KH5M steel is used as an indicator to assess the effectiveness of the applied modes of coil heat treatment in order to increase their corrosion resistance and improve their operational characteristics. Conducted experiments on heat treatment of certain steel coil sections allowed to determine rational heating modes for the studied coils, which made it possible to reduce their mass loss and increase corrosion resistance of working surfaces in the process of operation. Proposed heat treatment of steel coils at specified intervals of their operation in the tube furnaces creates conditions for their stable performance and affects the degree of industrial and environmental safety, as well as reduces material costs associated with the repair and replacement of individual assemblies and parts of tube furnaces.


  • Assessment of possibility of obtaining alloying components in the process of desalting of heavy hydrocarbon raw materials. Part 2

    by B. Issa, V. Yu. Bazhin

    Earlier, the authors had already successfully proposed a method for extracting minerals from crude oil as a first step, to be further developed in this second step in the direction of obtaining solid (metallic and / or oxide) phases of nickel and vanadium. The scientific, practical and strategic importance of the work is clearly-underlined with a general depletion of vanadium and nickel ores. In the current situation of mineral resources with a general depletion of vanadium and nickel ores, it becomes necessary to search for new and alternative resources to obtain these strategic and important metals and their compounds from available resources. Taking into account that vanadium and nickel ores are practically absent in the raw material resources base of some countries, such as Middle East’s countries. Thus, a high percentage of imports of this metal product remains, which worsens the economic situation that has developed during political conflicts. The scientific approach was based on a combination of hydrometallurgical and electrometallurgical experiments, consistently carried out through the processes of sorption and desorption during cathodic electrodeposition. Sorption processes for vanadium and nickel were carried out using a mixture of Syrian sorbing materials (incense-type resins and surface-activated natural clays) with finely ground glass SiO2. Cathodic electrodeposition experiments were carried out on a copper cathode plate, and on the other hand, an insoluble glassy carbon electrode was used as the anode. All batch experiments were carried out to determine the best conditions for vanadium and nickel sorption by studying six different parameters affecting the sorption capacity of vanadium and nickel. As a result, the maximum sorption capacity of vanadium and nickel was 87.5 % and 91.3 % consistently under the predetermined conditions. Eventually, 7.6 % Ni (with a purity of 97 %) was recovered from the solution after the desorption process by the electrolytic method (during electrolysis); 15.6 % (99.3 % pure) V2O5 and 11.5 % (79 % pure) NiO chemically.


  • Assessment of possibility of obtaining alloying components in the process of desalting of heavy hydrocarbon raw materials. Part 1

    by B. Issa, V. Yu. Bazhin, T. A. Aleksandrova, V. G. Povarov

    In the current situation of the mineral resources with a general depletion of ferrous and non-ferrous ores, it becomes necessary to search for new and alternative resources for obtaining metals and their compounds from available resources. Taking into account that ferrous and non-ferrous ores are practically lacking in some foreign countries, especially in Central Asia this problem becomes more actual. Thus, a high share of exports of ferrous and non-ferrous metals products remains due to lack of self resources, which increases the additional load on the countries, especially that suffer from wars like Syria. There is a wide range of hydrocarbon metal-containing raw materials (metal-bearing oils, oil sands, coal ash, shale, etc.) in Syrian resources, which may become an alternative source for production of ferrous and non-ferrous metals and their alloys; they also have a strategic interest for the Russian and foreign metallurgical industry. The concentration of impurities of ferrous and non-ferrous metals (such as Fe, Mn, Cr, V and Ni) in heavy crude oil is quite high, what in its turn leads to negative effects on operation of some equipment components, resulting in the need for emergency stops and downtimes of equipment and consequent repairs and technical maintenance. Development of alternative technologies for extraction of these metals at the desalination’s process of metal-bearing heavy crude oils can be characterized by interdisciplinary character, which simultaneously solves the problem of extracting ferrous and non-ferrous metal components in order to improve the properties of heavy oil as well as the oil products quality. Extraction of ferrous and heavy non-ferrous metals (iron, manganese, chromium, vanadium and nickel, copper) from the heavy metal-bearing Syrian crude oils makes a great interest, due to deteriorating economic situation in this country and lack of mineral ores. This study describes the hydrometallurgical technology based on combination of extraction-sorption processes for ferrous and non-ferrous metal extraction from heavy crude oil. The extraction is based on processing the emulsion of crude oil with aqueous solution of naphthenic acid, followed by centrifugal separation; them hydrocarbon metal-containing concentrate (acidified by HCl) is subjected to sorption process using a mixture of two Syrian natural sorbents, The following desorption process allows to recover vanadium and nickel from sorbent and to regenerate the sorbents with desorption efficiency 89.6 and 95.8% consecutively.


  • Open Access

    The role of chloride, oxygen and aluminum on corrosion resistance of coiled-pipes in tubular furnaces of oil refinery

    by Bashar Issa, Vladimir Yu. Bazhin, Nail M. Telyakov, Alexey N. Telyakov

    In this article has studied the negative roles of chlorides, dissolved oxygen and aluminum, which are existed directly in the oil or indirectly in the associated water on the corrosion resistance of the coiled-pipes of the tubular furnace inside KINEF refinery (Russia). In this paper, we studied the coiled-pipes of the ELOU-AVT-6 installation, which are subjected to severe destruction, and as a result, they are prematurely failed due to the negative effects of the studied impurities, which led to decrease their service life and the quality of oil products.


  • Open Access

    Processes of Extraction of Non-Ferrous and Precious Metals from Alternative Sources of Raw Materials

    by Bashar Issa, T A Aleksandrova

    The presence of precious metals in electronic waste such as gold, silver, platinum and palladium, as well as non-ferrous metals (copper, nickel, zinc, tin, etc.) make it attractive for recycling. In industry, both hydrometallurgical and pyrometallurgical methods are used to extract valuable metals from electronic waste. Universal method for processing of electronic scrap waste does not exist nowadays.


  • Increasing of corrosion resistance of radiant coiled-pipes in tubular furnaces at crude oil refinery

    by B. Issa, St. Petersburg Mining University, V. Yu. Bazhin, N. M. Telyakov, A. N. Telyakov

    ????? ??????????, ?????????? ??????????????, ?????????? ??????????, ??????? ???????, ?????? ?? ????????, ?????????? ????????, ???????? ??????????, ??????????? ???????, ????? ? ??????????, ?????????? ??????????, ??????? ??????????