Borad M. Barkachary
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Borad M. Barkachary has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Shrikrishna Nandkishor Joshi
Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, India
3 shared publications - Anil Kumar Deepati
Department of Mechanical Engineering Technology, College of Applied Industrial Technology (CAIT), Jazan University, Baysh, Saudi Arabia
1 shared publication - Mandeep Pathak1 shared publication
Shrikrishna N. Joshi
1 shared publication- Utpal Sen1 shared publication
Latest Publications
- 21 July 2026
- Published by Taylor & Francis
- p. 57-76
Modeling and Simulation of Mechanical Processes
3D printing, popularly known as additive manufacturing (AM), has been a revolutionary production method for various applications. Although it is very popular, the mechanical performance of parts or objects generated with this method lacks proper analysis. This study used the fused deposition modeling (FDM) method to manufacture experimental study samples. Polylactic acid (PLA), a well-known biodegradable thermoplastic polymer, is widely used due to its environmentally friendly properties and printing capabilities. ASTM D638 Type I Standard is employed to evaluate the tensile properties of PLA specimens in the MTS Acumen Universal Testing Machine (UTM). The study is focused on the influence of infill patterns and density. Nine samples were prepared using SolidWorks computer-aided design (CAD) software, featuring honeycomb and grid infill structures, which were incorporated to examine variations in strength with infill density at levels of 20%, 40%, 60%, and 80%, as well as a fully solid sample with a 100% infill, then printed using an Olivetti 3D desktop printer. Four samples of a honeycomb structure, and four samples of a grid structure were used. For simulation, the corresponding samples were analyzed using ANSYS software to determine stress distribution and deformation behavior. The results showed strong similarity between experimental and simulated data. It was found that an 80% honeycomb infill possesses the most favorable balance between mechanical strength and weight, i.e. a better strength-to-weight ratio. This study indicates that the structural optimization of 3D-printed parts relies heavily on infill pattern and density, particularly in 3D-printed PLA parts using FDM.
- 21 July 2026
- Published by Taylor & Francis
- p. 57-76
Modeling and Simulation of Mechanical Processes
3D printing, popularly known as additive manufacturing (AM), has been a revolutionary production method for various applications. Although it is very popular, the mechanical performance of parts or objects generated with this method lacks proper analysis. This study used the fused deposition modeling (FDM) method to manufacture experimental study samples. Polylactic acid (PLA), a well-known biodegradable thermoplastic polymer, is widely used due to its environmentally friendly properties and printing capabilities. ASTM D638 Type I Standard is employed to evaluate the tensile properties of PLA specimens in the MTS Acumen Universal Testing Machine (UTM). The study is focused on the influence of infill patterns and density. Nine samples were prepared using SolidWorks computer-aided design (CAD) software, featuring honeycomb and grid infill structures, which were incorporated to examine variations in strength with infill density at levels of 20%, 40%, 60%, and 80%, as well as a fully solid sample with a 100% infill, then printed using an Olivetti 3D desktop printer. Four samples of a honeycomb structure, and four samples of a grid structure were used. For simulation, the corresponding samples were analyzed using ANSYS software to determine stress distribution and deformation behavior. The results showed strong similarity between experimental and simulated data. It was found that an 80% honeycomb infill possesses the most favorable balance between mechanical strength and weight, i.e. a better strength-to-weight ratio. This study indicates that the structural optimization of 3D-printed parts relies heavily on infill pattern and density, particularly in 3D-printed PLA parts using FDM.
- 16 March 2023
- Published by Springer Nature
- p. 93-116
Ultra-Precise Single-Point Diamond Turning Process and Its Low-Cost Alternative Methods
- 16 March 2023
- Published by Springer Nature
- p. 93-116
Ultra-Precise Single-Point Diamond Turning Process and Its Low-Cost Alternative Methods
- 29 May 2021
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series C
- Vol. 103 (1) , 53-62
Numerical Computation and Analysis of Cutting Forces during Nanometric Scratching of Silicon Carbide
- 29 May 2021
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series C
- Vol. 103 (1) , 53-62
Numerical Computation and Analysis of Cutting Forces during Nanometric Scratching of Silicon Carbide
- 18 October 2019
- Published by Springer Nature
- p. 861-875
Numerical Simulation and Experimental Validation of Nanoindentation of Silicon Using Finite Element Method
- 18 October 2019
- Published by Springer Nature
- p. 861-875
Numerical Simulation and Experimental Validation of Nanoindentation of Silicon Using Finite Element Method
- 1 January 2015
- Published by Inderscience Publishers in International Journal of Machining and Machinability of Materials
- Vol. 17 (3/4) , 330
Integrated finite element method and response surface methodology-based modelling and simulation of single point diamond turning of silicon
This paper presents an integrated finite element method-response surface methodology (FEM-RSM)-based approach for modelling and simulation of single point diamond turning (SPDT) operation of silicon. Initially, a two-dimensional nonlinear plain strain model of SPDT process has been developed by using FEM. The results predicted by the numerical model were validated with the experimental results available in the literature for similar process conditions and they found in good agreement. Detailed parametric studies were carried out using RSM to study the effect of cutting speed, rake angle, depth of cut and tool edge radius on machining forces. The RSM-based model was also validated by carrying out confirmation simulations and the model was found to be predicting good with mean prediction error of about 5%. It is felt that the proposed approach can be a good alternative to the costly, time consuming and tedious SPDT experimental study of silicon material.
- 1 January 2015
- Published by Inderscience Publishers in International Journal of Machining and Machinability of Materials
- Vol. 17 (3/4) , 330
Integrated finite element method and response surface methodology-based modelling and simulation of single point diamond turning of silicon
This paper presents an integrated finite element method-response surface methodology (FEM-RSM)-based approach for modelling and simulation of single point diamond turning (SPDT) operation of silicon. Initially, a two-dimensional nonlinear plain strain model of SPDT process has been developed by using FEM. The results predicted by the numerical model were validated with the experimental results available in the literature for similar process conditions and they found in good agreement. Detailed parametric studies were carried out using RSM to study the effect of cutting speed, rake angle, depth of cut and tool edge radius on machining forces. The RSM-based model was also validated by carrying out confirmation simulations and the model was found to be predicting good with mean prediction error of about 5%. It is felt that the proposed approach can be a good alternative to the costly, time consuming and tedious SPDT experimental study of silicon material.