Husam Sadek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Husam Sadek has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Ahmad Al-Tawalbeh
Seero Engineering Consulting LLC, Doha, Qatar
1 shared publication- Carol Massarra
East Carolina University Greenville USA
1 shared publication Daniel Swiertz
Materials Engineer, Bitumix Solutions, Div. of H.G. Meigs, LLC, 1220 Superior St., Portage, WI 53901
1 shared publication- Ellington Hemphill1 shared publication
- George Wang
Department of Construction Management, East Carolina University, Greenville, NC 27858, USA
1 shared publication Hasibul Hasan Rahat
Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VA 24060, USA
1 shared publication
Latest Publications
- 19 September 2022
- Published by Morressier GmbH
Variability and Uncertainty of Overlay Tester Testing Data, Analysis, and Results
The Texas Transportation Institute Overlay Tester (OT) is the most commonly used device to evaluate asphalt mixtures’ resistance to reflective cr |
- 19 September 2022
- Published by Morressier GmbH
Variability and Uncertainty of Overlay Tester Testing Data, Analysis, and Results
The Texas Transportation Institute Overlay Tester (OT) is the most commonly used device to evaluate asphalt mixtures’ resistance to reflective cr |
- 1 September 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (9) , 03120004
State-of-the-Art Review of the Evaluation of Asphalt Mixtures’ Resistance to Reflective Cracking in Laboratory
Reflective cracking is one of the major forms of deterioration in pavements and is very common when hot-mix asphalt (HMA) overlays are constructed over a base with discontinuities in its surface. This issue has not received proper attention compared with classical fatigue cracking. However, it is a major concern during the selection of asphalt mixture surface courses for pavements with an underlying cracked base. This work identified the most appropriate testing device for investigating the resistance of asphalt mixtures to reflective cracking in the laboratory. An in-depth review of the available literature was conducted and 17 reflective cracking testing devices were evaluated, among which best three were chosen based on their availability, ease of use, variability, repeatability of the test results, and field validation. It was concluded that the Hamburg wheel tracking tester (HWTT), the wheel reflective cracking (WRC) apparatus, and the upgraded Texas Transportation Institute (TTI) overlay tester are the best available devices to examine resistance to reflective cracking in the laboratory.
- 1 September 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (9) , 03120004
State-of-the-Art Review of the Evaluation of Asphalt Mixtures’ Resistance to Reflective Cracking in Laboratory
Reflective cracking is one of the major forms of deterioration in pavements and is very common when hot-mix asphalt (HMA) overlays are constructed over a base with discontinuities in its surface. This issue has not received proper attention compared with classical fatigue cracking. However, it is a major concern during the selection of asphalt mixture surface courses for pavements with an underlying cracked base. This work identified the most appropriate testing device for investigating the resistance of asphalt mixtures to reflective cracking in the laboratory. An in-depth review of the available literature was conducted and 17 reflective cracking testing devices were evaluated, among which best three were chosen based on their availability, ease of use, variability, repeatability of the test results, and field validation. It was concluded that the Hamburg wheel tracking tester (HWTT), the wheel reflective cracking (WRC) apparatus, and the upgraded Texas Transportation Institute (TTI) overlay tester are the best available devices to examine resistance to reflective cracking in the laboratory.
- Open Access
- 1 February 2020
- Published by Qatar University Press
- p. 281-287
Site-Specific Traffic Loading Estimation Challenges in Structural Pavement Design Process in Qatar: A Case Study
- 1 February 2020
- Published by Qatar University Press
- p. 281-287
Open AccessSite-Specific Traffic Loading Estimation Challenges in Structural Pavement Design Process in Qatar: A Case Study
- 1 January 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (1)
Performance Comparison of Laboratory-Produced Short-Term Aged Mixtures with Plant-Produced Mixtures
Short-term oven aging (STOA) is used in current practice to simulate typical aging of asphalt mixtures during plant production and field construction. This study compares the volumetrics and performance of laboratory-produced asphalt mixtures and corresponding plant-produced mixtures to examine whether STOA simulates plant short-term aging. Eight plant-produced mixtures with varying levels of binder performance grade, binder content, filler content, and traffic design levels were tested for rutting and cracking resistance using Hamburg wheel-tracking (HWT) and semicircular bending (SCB) tests, respectively. The eight mixtures were duplicated in the laboratory and subjected to 2 h of reheating and 2 h of oven aging before testing. The eight lab-produced mixtures had comparable volumetric properties to the plant-produced mixtures, and the performance results showed a relatively high level of equality between plant- and lab-produced mixtures even when the properties of their extracted and recovered binders at high and intermediate temperatures are found to be significantly different. Based on the findings of this study, the use of the outlined STOA procedure is considered sufficient to represent standard plant production aging.
- 1 January 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (1)
Performance Comparison of Laboratory-Produced Short-Term Aged Mixtures with Plant-Produced Mixtures
Short-term oven aging (STOA) is used in current practice to simulate typical aging of asphalt mixtures during plant production and field construction. This study compares the volumetrics and performance of laboratory-produced asphalt mixtures and corresponding plant-produced mixtures to examine whether STOA simulates plant short-term aging. Eight plant-produced mixtures with varying levels of binder performance grade, binder content, filler content, and traffic design levels were tested for rutting and cracking resistance using Hamburg wheel-tracking (HWT) and semicircular bending (SCB) tests, respectively. The eight mixtures were duplicated in the laboratory and subjected to 2 h of reheating and 2 h of oven aging before testing. The eight lab-produced mixtures had comparable volumetric properties to the plant-produced mixtures, and the performance results showed a relatively high level of equality between plant- and lab-produced mixtures even when the properties of their extracted and recovered binders at high and intermediate temperatures are found to be significantly different. Based on the findings of this study, the use of the outlined STOA procedure is considered sufficient to represent standard plant production aging.