Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eliza Romańczuk-Ruszuk has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Manganese and calcium complexes with 2,4-dichlorophenoxyacetic acid and 4‑chloro-2-methylphenoxyacetic acid – structures, thermal properties, cytotoxic and antimicrobial study

    by Grzegorz Świderski, Gabriela Masłowska, Monika Kalinowska, Ömer Tamer, Ewa Ciszkowicz, Katarzyna Lecka-Szlachta, Renata Łyszczek, Halina Głuchowska, Eliza Romańczuk-Ruszuk, Marzena Smolewska

  • Optimizing Infill Patterns for Enhanced Durability and Resilience in Direct Ink Writing-Additive Manufacturing of Silicone Elastomers

    by Eliza Romańczuk-Ruszuk, Łukasz Bolesta, Dawid Łysik, Julia Horowicz, Grzegorz Budzik, Bogna Sztorch, Robert E. Przekop

    This study investigates the influence of internal infill geometry and density on the mechanical and rheological behavior of 3D-printed silicone structures fabricated using direct ink writing. Test samples with three different infill patterns (linear, triangular, and honeycomb) and four infill densities (55%, 70%, 85%, and 100%) were manufactured and evaluated through rheological creep–recovery analysis, static tensile and compression tests, and cyclic compression loading. The results demonstrate that both geometry and infill degree significantly affect the rheological and mechanical properties, such as static and cyclic compressive tests of the printed structures. Linear infill exhibited the highest compressive strength at 85% density and maintained favorable short-term stability during initial cyclic loading. Triangular patterns displayed significant sensitivity to infill density, with distinct stiffness characteristics, while honeycomb structures offered a balanced trade-off between density and mechanical response. Microscopic observations confirmed that print path quality and structural continuity correlate with the mechanical properties. The findings underscore the importance of tailored infill design in optimizing the functional performance of silicone-based components for applications such as orthotic insoles, soft robotics, and cushioning systems.

  • Open Access

    Carbon Nanotube-Enhanced Silicone Fingerprint Replicas for Biometric Security Testing

    by Eliza Romanczuk-Ruszuk, Anastazja Orlow, Bogna Sztorch, Kamil Dydek, Bartłomiej Przybyszewski, Robert E. Przekop

    Biometric authentication systems, including fingerprint readers, are widely used in mobile devices but remain vulnerable to spoofing attacks. This paper evaluates the properties of carbon nanotube (CNT)-modified silicone fingerprint replicas for use in security testing. Microscopic analyses, roughness measurements, and electrical conductivity measurements showed that the effectiveness of the replicas depends on the type of silicone matrix and the concentration of CNTs. Replicas made with Double 32 at 3% CNT exceeded the percolation threshold, achieving significantly higher conductivity. In practical tests, capacitive scanners proved susceptible to recording artificial prints, while ultrasonic readers were more resistant. The results indicate that although CNTs improve the properties of replicas, their ability to reproduce higher-order features remains limited.


  • Open Access

    Dual-Functional Organosilicon Additives Containing Methacrylate and Trimethoxysilyl Groups Enhancing Impact Toughness of Polylactide (PLA): Structure–Property Relationship

    by Julia Głowacka, Miłosz Frydrych, Eliza Romańczuk-Ruszuk, Yi Gao, Hui Zhou, Robert E. Przekop, Bogna Sztorch

    The demands of the green economy necessitate modern polymer materials that are not only environmentally friendly but also durable and capable of long service life. Bio-based polylactide (PLA) polyesters have gained significant traction in various industrial markets; however, their application in specialized sectors is hindered by high brittleness. This study extensively examines the effects of 1–5% of synthetically obtained tetracyclosiloxane (CS) and octaspherosilicate (OSS) derivatives with methacrylate (MA) and trimethoxysilyl (TMOS) groups as functional modifiers for PLA. The research provides a detailed characterization of PLA/CS and PLA/OSS materials, including a comparative analysis of mechanical properties such as tensile, flexural, and dynamic resistance. Notably, incorporating 5% CS-2MA-2TMOS into PLA resulted in a remarkable 104% increase in impact resistance. The study further evaluates the influence of these modifications on thermal properties (DSC, TGA), heat deflection temperature (HDT), and surface character (WCA). The miscibility between the organosilicon additives and PLA was assessed using oscillatory rheometry and SEM-EDS analysis. The melt-rheology analysis explained the mechanisms behind the interaction between the CS and OSS additives with the PLA matrix, highlighting their lubricating effects on the melt flow behavior. The study was complemented by XRD structural analysis and verification of the structure of PLA-based materials by optical microscopy and SEM analysis, demonstrating a plasticizing effect and uniform distribution of the modifiers. The findings strongly suggest that, even at low concentrations, organosilicon additives serve as effective impact modifiers for PLA.


  • Open Access

    The Impact of Multifunctional Polysiloxanes on Enhancing the Properties of Polyethylene Terephthalate Glycol (PET-G) for FDM/FFF 3D-Printing

    by Bogna Sztorch, Julia Głowacka, Miłosz FRYDRYCH, Daria Pakuła, Eliza Romańczuk-Ruszuk, Natalia Kubiak, Robert E. Przekop

    The use of incremental technologies in various biomedical fields requires the development of new materials that can meet the needs of new applications. This article delves into the impact of modifying PETG with multifunctional polysiloxanes (0.10 wt.% to 2.5 wt.%) on the properties of composite materials produced for 3D printing in bioengineering applications. The article covers the effects on strength (tensile, flexural), rheological (MFR), thermal (DSC), and surface (WCA) properties. The results obtained in this study indicate that polysiloxane additives have a positive effect on the material’s elasticity and bending strength. Moreover, the results presented are a great example of interdisciplinary research combining chemical knowledge to develop specialized material applications.

  • Open Access

    Development of Magnetic Sponges Using Steel Melting on 3D Carbonized Spongin Scaffolds Under Extreme Biomimetics Conditions

    by Bartosz Leśniewski, Martin Kopani, Anna Szczurek, Michał Matczak, Janusz Dubowik, Martyna Kotula, Anita Kubiak, Dmitry Tsurkan, Eliza Romańczuk-Ruszuk, Marek Nowicki, et al.

    This study presents a novel approach to fabricating magnetic sponge-like composites by melting various types of steel onto three-dimensional (3D) carbonized spongin scaffolds under extreme biomimetic conditions. Spongin, a renewable marine biopolymer with high thermal stability, was carbonized at 1200 °C to form a turbostratic graphite matrix capable of withstanding the high-temperature steel melting process (1450–1600 °C). The interaction between molten steel vapors and the carbonized scaffolds resulted in the formation of nanostructured iron oxide (primarily hematite) coatings, which impart magnetic properties to the resulting composites. Detailed characterization using SEM-EDX, HRTEM, FT-IR, and XRD confirmed the homogeneous distribution of iron oxides on and within the carbonized fibrous matrix. Electrochemical measurements further demonstrated the electrocatalytic potential of the composite, particularly the sample modified with stainless steel 316L—for the hydrogen evolution reaction (HER), offering promising perspectives for green hydrogen production. This work highlights the potential of extreme biomimetics to create functional, scalable, and sustainable materials for applications in catalysis, environmental remediation, and energy technologies.


  • Open Access

    Novel Pla Composites Modified with Steel Fibres and (3-Thiopropyl) Polysilsesquioxane Derivatives

    by Daria Pakuła, Bogna Sztorch, Eliza Romańczuk-Ruszuk, Bogdan Marciniec, Robert E. Przekop

    In recent years, a significant increase in the development of new composite materials with desirable mechanical, thermal or surface properties has been observed. One of the popular polymers on the market is polylactide. This article explores how to modify the polymer using steel fibres and organosilicon compounds (SSQ-SH, SSQ-SH-OCT, and SSQ-SH-OFP) to enhance its properties. Test samples were obtained by injection molding with varying concentrations of 0.5%, 1%, 1.5%, 2.5%, and 5% of steel fibres. Mechanical tests, including tensile strength, elongation at break, and impact strength, were conducted, along with an analysis of the contact angle. The modified samples showed higher impact strength values, with the PLA /steel fibres /SSQ-SH sample seeing an increase of 12%. The addition of modifiers with fluoroalkyl groups led to a contact angle increase of 8.5% compared to neat PLA. Thermal tests (TGA) were also carried out to determine the influence of fibres and organosilicon compounds on decomposition.


  • Open Access

    Mechanical Properties of 3D Printed PLA Scaffolds for Bone Regeneration

    by Paula Kundreckaitė, Andžela Šešok, Rimantas Stonkus, Gediminas Gaidulis, Eliza Romańczuk-Ruszuk, Jolanta Pauk

    The growing interest in biodegradable scaffolds for bone regeneration created a need to investigate new materials suitable for scaffold formation. Poly(lactic acid) (PLA) is a polymer commonly used in biomedical engineering, e.g. in tissue engineering as a biodegradable material. However, the mechanical behavior of PLA along its degradation time is still not explored well. For this reason, the mechanical properties of PLA scaffolds affected by incubation in physiological medium needs to be investigated to show the potential of PLA to be used as a material for biodegradable scaffold formation. The purpose of this research is to determine the mechanical properties of PLA scaffolds before and after incubation, and to apply constitutive material models for further behavior prediction. Two sets of PLA scaffolds were printed by the 3D printer “Prusa i3 MK3S” and sterilized by ultraviolet light and ethanol solution. The first set of specimens was incubated in DMEM (Dulbecco’s Modified Eagle Medium) for 60, 120, and 180 days maintaining 36.5 °C temperature. The mechanical properties of the scaffolds were determined after performing the compression test in the “Mecmesin MultiTest 2.5-i” testing stand with a force applied at two different speed modes. The obtained data was curve fitted with the hyperelastic material models for a model suitability study. The second set of specimens was incubated in PBS (Phosphate Buffered Saline) for 20 weeks and used in a polymer degradation study. The obtained results show that the mechanical properties of PLA scaffolds do not decrease during incubation in physiological medium for a predicted new bone tissue formation period, though hydrolysis starts at the very beginning and increases with time. PLA as a material seems to be suitable for the use in bone tissue engineering as it allows to form biocompatible and biodegradable scaffolds with high mechanical strength, required for effective tissue formation.


  • Open Access

    High flexural modulus of polilactide composites for 3D printing technology using multifunctional octaspherosilicates

    by Bogna Sztorch, Julia Głowacka, Dariusz Brząkalski, Eliza Romanczuk-Ruszuk, Bogdan Marciniec, Robert E. Przekop

    In recent years, there has been a growing research interest focused on employing organosilicon compounds, including silsesquioxanes, as modifiers for different polymers. This work describes the methodology for obtaining a new nanocomposite using functionalized spherosilicates, which belong to the general group of silsesquioxane compounds. These modifiers are used as additives to polylactide to improve its properties in the context of the additive technology fused deposition modeling/fuse fabrication filament. The developed materials were characterized by better rheology compared to neat PLA. Differential scanning calorimetry analysis of the additives confirmed their reactive nature. Based on water contact angle tests, it was observed that up to 1.5% of the load, none of the additives influenced the wetting of the material surface. Microscopic images revealed visible agglomerations for the OSS-6MA-2TMOS system, while in samples with a lower share of methacrylic groups, very good dispersion of the additive in the matrix was observed. Also, the microscopic observations showed better melting of the composite layers containing additives in the 3D printing process, combined with the appropriate printing parameters, can ultimately produce more robust objects with fewer voids and discontinuities. The addition also resulted in an increase in mechanical parameters, mainly in terms of bending strength and impact strength. Graphical abstract


  • Open Access

    Micro- and Nano-Pollutants from Tires and Car Brakes Generated in the Winter Season in the Poznan City Urban Environment

    by Robert E. Przekop, Bogna Sztorch, Daria Pakuła, Eliza Romańczuk-Ruszuk, Roksana Konieczna, Miłosz Frydrych

    This research, focusing on the environmental impact of tire and brake disc pad wear, constitutes a significant area of transport-related studies. These two key vehicle components are not only the most frequently worn but also generate micro- and nano-pollutants (i.e., rubber, metal oxides) that potentially harm the environment. Over half of the globally produced natural and synthetic rubbers, which amounted to about 30 million tons in 2022, are used for tire production. This work focuses on the study of roadside snow, sand, and standing water deposits from various locations in the urban agglomeration (Poznań, Poland) during the winter season, determining their qualitative composition and the quantitative content of pollutants originating from tire abrasion. In addition, the method of washing nano- and micro-rubber particles and their full characteristics was also presented. Fourier-transform infrared (FT-IR) and nuclear magnetic resonance (NMR) spectroscopic studies, optical and scanning electron microscopy (SEM-EDS), particle size studies using a dynamic light scattering (DLS) particle analyzer, and thermogravimetric analysis (TGA) were conducted for a detailed characterization of the pollutants in the environment. The conducted particle separation methods allowed for the extraction of a fraction mainly containing gum residues with particle sizes less than 2 µm. The results of these tests make it possible to estimate the level of contamination with rubber and metal residues during the abrasion of tires, pads, and brake discs while driving, which is crucial for understanding the impact of vehicle part exploitation on the environment.