Tommaso Bradde
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tommaso Bradde has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Stefano Grivet-Talocia
Politecnico di Torino
16 shared publications - Alessandro Zanco
Politecnico di Torino
7 shared publications - Marco De Stefano
Department of Electronics and Telecommunications, Politecnico di Torino, Torino, Italy
5 shared publications - Giuseppe Carlo Calafiore
Department of Electronics and Telecommunications, Politecnico di Torino, Torino, Italy
4 shared publications - Antonio Carlucci
Department of Electronics and Telecommunications, Politecnico di Torino, Turin, Italy
3 shared publications - Anton Victorovich Proskurnikov
Politecnico di Torino
2 shared publications
Latest Publications
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (10) , 15265-15277
Permeability Macromodels for Magnetic Powder Materials Under DC Bias
Magnetic powder materials are often considered for inductors used in high-current applications due to their high saturation flux densities and good high-frequency performance. For the design and optimization of powder-based high-frequency inductors, it is important to consider permeability spectra with superimposed dc bias. To include those properties in system-level circuit simulations, compact macromodels are required. Therefore, this work proposes a closed-box model and a phenomenological model, providing equivalent circuits for the permeability of magnetic material under dc bias. The accuracy of both models is investigated using measured permeability spectra of commercial powder core materials. Application examples are outlined to illustrate the benefits of those macromodels. It is demonstrated that the closed-box model provides very accurate results over the entire range of parameters for all materials, while the phenomenological model in its present, simple form and gives satisfactory results only for selected magnetic materials in the frequency range of interest.
- 28 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (10) , 15265-15277
Permeability Macromodels for Magnetic Powder Materials Under DC Bias
Magnetic powder materials are often considered for inductors used in high-current applications due to their high saturation flux densities and good high-frequency performance. For the design and optimization of powder-based high-frequency inductors, it is important to consider permeability spectra with superimposed dc bias. To include those properties in system-level circuit simulations, compact macromodels are required. Therefore, this work proposes a closed-box model and a phenomenological model, providing equivalent circuits for the permeability of magnetic material under dc bias. The accuracy of both models is investigated using measured permeability spectra of commercial powder core materials. Application examples are outlined to illustrate the benefits of those macromodels. It is demonstrated that the closed-box model provides very accurate results over the entire range of parameters for all materials, while the phenomenological model in its present, simple form and gives satisfactory results only for selected magnetic materials in the frequency range of interest.
- Open Access
- 24 February 2025
- Published by Springer Nature in Journal of Scientific Computing
- Vol. 103 (1) , 1-28
A Modified AAA Algorithm for Learning Stable Reduced-Order Models from Data
In recent years, the Adaptive Antoulas-Anderson () algorithm has been applied extensively for generating Reduced Order Models (ROMs) of large scale Linear Time-Invariant systems starting from measurements of their transfer functions. When used for Model Order Reduction (MOR) of an asymptotically stable system, the ROMs generated applying are not guaranteed to preserve this fundamental property, thus rendering them impractical in many relevant applications. To overcome this issue, we propose a novel algebraic characterization for the stability of ROMs represented under the barycentric structure. We then translate such characterization into a set of convex semidefinite constraints that can be embedded into the optimization routine to explicitly maximize the model accuracy while ensuring its stability. Finally, we generalize the resulting modeling framework to allow for efficient stable MOR of Multi-Input-Multi-Output systems. An extensive set of numerical experiments provides practical evidence for the effectiveness of the proposed approach and compares its performance with those of available state-of-the-art methods.
- 24 February 2025
- Published by Springer Nature in Journal of Scientific Computing
- Vol. 103 (1) , 1-28
Open AccessA Modified AAA Algorithm for Learning Stable Reduced-Order Models from Data
In recent years, the Adaptive Antoulas-Anderson () algorithm has been applied extensively for generating Reduced Order Models (ROMs) of large scale Linear Time-Invariant systems starting from measurements of their transfer functions. When used for Model Order Reduction (MOR) of an asymptotically stable system, the ROMs generated applying are not guaranteed to preserve this fundamental property, thus rendering them impractical in many relevant applications. To overcome this issue, we propose a novel algebraic characterization for the stability of ROMs represented under the barycentric structure. We then translate such characterization into a set of convex semidefinite constraints that can be embedded into the optimization routine to explicitly maximize the model accuracy while ensuring its stability. Finally, we generalize the resulting modeling framework to allow for efficient stable MOR of Multi-Input-Multi-Output systems. An extensive set of numerical experiments provides practical evidence for the effectiveness of the proposed approach and compares its performance with those of available state-of-the-art methods.
- Open Access
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (1) , 64-74
Improving Robustness to Termination Conditions in Passivity Enforcement of Rational Macromodels
Common design and verification flows of electronic systems under Signal and/or Power Integrity (SI/PI) constraints often rely on the availability of accurate macromodels of components and interconnects. Such macromodels enable fast transient analysis at the system level and consequently the possibility to efficiently verify the quality of the design. Several approaches are available to construct macromodels whose response accurately matches the raw data used for their identification, most often tabulated scattering responses. However, for the sake of SI/PI optimization, it is mandatory that such models reproduce accurately the underlying structure response when inserted as a component in a larger network, possibly subjected to different or uncertain port termination schemes. This capability is not inherently guaranteed by standard macromodeling approaches. Recently, the authors proposed a modified Vector Fitting (VF) iteration that overcomes this issue, by optimizing the macromodel accuracy with respect to sets of arbitrary terminations. This work completes this robust macromodeling framework by introducing a companion perturbation-based passivity enforcement scheme that preserves the macromodel accuracy with respect to the prescribed set of loads. The main innovation is the definition of a novel loss function to drive the perturbation routine, that allows to correct the non-passive model while preserving the required robust performance. Numerical evidence on a set of relevant Power Delivery Network (PDN) benchmarks confirms the effectiveness of the proposed approach.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (1) , 64-74
Open AccessImproving Robustness to Termination Conditions in Passivity Enforcement of Rational Macromodels
Common design and verification flows of electronic systems under Signal and/or Power Integrity (SI/PI) constraints often rely on the availability of accurate macromodels of components and interconnects. Such macromodels enable fast transient analysis at the system level and consequently the possibility to efficiently verify the quality of the design. Several approaches are available to construct macromodels whose response accurately matches the raw data used for their identification, most often tabulated scattering responses. However, for the sake of SI/PI optimization, it is mandatory that such models reproduce accurately the underlying structure response when inserted as a component in a larger network, possibly subjected to different or uncertain port termination schemes. This capability is not inherently guaranteed by standard macromodeling approaches. Recently, the authors proposed a modified Vector Fitting (VF) iteration that overcomes this issue, by optimizing the macromodel accuracy with respect to sets of arbitrary terminations. This work completes this robust macromodeling framework by introducing a companion perturbation-based passivity enforcement scheme that preserves the macromodel accuracy with respect to the prescribed set of loads. The main innovation is the definition of a novel loss function to drive the perturbation routine, that allows to correct the non-passive model while preserving the required robust performance. Numerical evidence on a set of relevant Power Delivery Network (PDN) benchmarks confirms the effectiveness of the proposed approach.
- 1 March 2024
- Published by Springer Nature
- p. 152-158
Data-Driven Model Order Reduction of Parameterized Dissipative Linear Time-Invariant Systems
- 1 March 2024
- Published by Springer Nature
- p. 152-158
Data-Driven Model Order Reduction of Parameterized Dissipative Linear Time-Invariant Systems
- Open Access
A modified AAA algorithm for learning stable reduced-order models from data
In recent years, the Adaptive Antoulas-Anderson AAA algorithm has established itself as the method of choice for solving rational approximation problems. Data-driven Model Order Reduction (MOR) of large-scale Linear Time-Invariant (LTI) systems represents one of the many applications in which this algorithm has proven to be successful since it typically generates reduced-order models (ROMs) efficiently and in an automated way. Despite its effectiveness and numerical reliability, the classical AAA algorithm is not guaranteed to return a ROM that retains the same structural features of the underlying dynamical system, such as the stability of the dynamics. In this paper, we propose a novel algebraic characterization for the stability of ROMs with transfer function obeying the AAA barycentric structure. We use this characterization to formulate a set of convex constraints on the free coefficients of the AAA model that, whenever verified, guarantee by construction the asymptotic stability of the resulting ROM. We suggest how to embed such constraints within the AAA optimization routine, and we validate experimentally the effectiveness of the resulting algorithm, named stabAAA, over a set of relevant MOR applications.
Open AccessA modified AAA algorithm for learning stable reduced-order models from data
In recent years, the Adaptive Antoulas-Anderson AAA algorithm has established itself as the method of choice for solving rational approximation problems. Data-driven Model Order Reduction (MOR) of large-scale Linear Time-Invariant (LTI) systems represents one of the many applications in which this algorithm has proven to be successful since it typically generates reduced-order models (ROMs) efficiently and in an automated way. Despite its effectiveness and numerical reliability, the classical AAA algorithm is not guaranteed to return a ROM that retains the same structural features of the underlying dynamical system, such as the stability of the dynamics. In this paper, we propose a novel algebraic characterization for the stability of ROMs with transfer function obeying the AAA barycentric structure. We use this characterization to formulate a set of convex constraints on the free coefficients of the AAA model that, whenever verified, guarantee by construction the asymptotic stability of the resulting ROM. We suggest how to embed such constraints within the AAA optimization routine, and we validate experimentally the effectiveness of the resulting algorithm, named stabAAA, over a set of relevant MOR applications.
- Open Access
- 5 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (10) , 1553-1566
A Compressed Multivariate Macromodeling Framework for Fast Transient Verification of System-Level Power Delivery Networks
This paper discusses a reduced-order modeling and simulation approach for fast transient power integrity verification at full system level. The reference structure is a complete power distribution network (PDN) from platform voltage regulator module (VRM) to multiple cores, including board, package, decoupling capacitors, and per-core fully integrated voltage regulators (FIVR). All blocks are characterized and known through high-fidelity models derived from first-principle solvers (full-wave electromagnetic and circuit-level extractions). The complexity of such detailed characterization grows very large and becomes intractable, especially for power integrity verification of massive multicore platforms subjected to real workload scenarios. We approach this problem by exploiting a multi-stage macromodeling and compression process, leading to a compact representation of the system dynamics in terms of a linearized state-space structure with multiple feedback loops from the FIVR controllers. The PDN macromodel is obtained through a data-driven approach starting from reference small-signal frequency responses, obtaining a sparse and structured representation specifically designed to match the behavior of the reference system. The resulting compact model is then solved in time-domain very efficiently. Results on mobile and enterprise server benchmarks demonstrate a speedup in runtime up to 50× with respect to HSPICE, with negligible loss of accuracy.
- 5 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (10) , 1553-1566
Open AccessA Compressed Multivariate Macromodeling Framework for Fast Transient Verification of System-Level Power Delivery Networks
This paper discusses a reduced-order modeling and simulation approach for fast transient power integrity verification at full system level. The reference structure is a complete power distribution network (PDN) from platform voltage regulator module (VRM) to multiple cores, including board, package, decoupling capacitors, and per-core fully integrated voltage regulators (FIVR). All blocks are characterized and known through high-fidelity models derived from first-principle solvers (full-wave electromagnetic and circuit-level extractions). The complexity of such detailed characterization grows very large and becomes intractable, especially for power integrity verification of massive multicore platforms subjected to real workload scenarios. We approach this problem by exploiting a multi-stage macromodeling and compression process, leading to a compact representation of the system dynamics in terms of a linearized state-space structure with multiple feedback loops from the FIVR controllers. The PDN macromodel is obtained through a data-driven approach starting from reference small-signal frequency responses, obtaining a sparse and structured representation specifically designed to match the behavior of the reference system. The resulting compact model is then solved in time-domain very efficiently. Results on mobile and enterprise server benchmarks demonstrate a speedup in runtime up to 50× with respect to HSPICE, with negligible loss of accuracy.
- Open Access
- 12 June 2023
- Published by Springer Nature in Cardiovascular Engineering and Technology
- Vol. 14 (4) , 505-525
A Vector Fitting Approach for the Automated Estimation of Lumped Boundary Conditions of 1D Circulation Models
Purpose: The choice of appropriate boundary conditions is a crucial step in the development of cardiovascular models for blood flow simulations. The three-element Windkessel model is usually employed as a lumped boundary condition, providing a reduced order representation of the peripheral circulation. However, the systematic estimation of the Windkessel parameters remains an open problem. Moreover, the Windkessel model is not always adequate to model blood flow dynamics, which often require more elaborate boundary conditions. In this study, we propose a method for the estimation of the parameters of high order boundary conditions, including the Windkessel model, from pressure and flow rate waveforms at the truncation point. Moreover, we investigate the effect of adopting higher order boundary conditions, corresponding to equivalent circuits with more than one storage element, on the accuracy of the model. Method: The proposed technique is based on Time-Domain Vector Fitting, a modeling algorithm that, given samples of the input and output of a system, such as pressure and flow waveforms, can derive a differential equation approximating their relation. Results: The capabilities of the proposed method are tested on a 1D circulation model consisting of the 55 largest human systemic arteries, to demonstrate its accuracy and its usefulness to estimate boundary conditions with order higher than the traditional Windkessel models. The proposed method is compared to other common estimation techniques, and its robustness in parameter estimation is verified in presence of noisy data and of physiological changes of aortic flow rate induced by mental stress. Conclusion: Results suggest that the proposed method is able to accurately estimate boundary conditions of arbitrary order. Higher order boundary conditions can improve the accuracy of cardiovascular simulations, and Time-Domain Vector Fitting can automatically estimate them.
- 12 June 2023
- Published by Springer Nature in Cardiovascular Engineering and Technology
- Vol. 14 (4) , 505-525
Open AccessA Vector Fitting Approach for the Automated Estimation of Lumped Boundary Conditions of 1D Circulation Models
Purpose: The choice of appropriate boundary conditions is a crucial step in the development of cardiovascular models for blood flow simulations. The three-element Windkessel model is usually employed as a lumped boundary condition, providing a reduced order representation of the peripheral circulation. However, the systematic estimation of the Windkessel parameters remains an open problem. Moreover, the Windkessel model is not always adequate to model blood flow dynamics, which often require more elaborate boundary conditions. In this study, we propose a method for the estimation of the parameters of high order boundary conditions, including the Windkessel model, from pressure and flow rate waveforms at the truncation point. Moreover, we investigate the effect of adopting higher order boundary conditions, corresponding to equivalent circuits with more than one storage element, on the accuracy of the model. Method: The proposed technique is based on Time-Domain Vector Fitting, a modeling algorithm that, given samples of the input and output of a system, such as pressure and flow waveforms, can derive a differential equation approximating their relation. Results: The capabilities of the proposed method are tested on a 1D circulation model consisting of the 55 largest human systemic arteries, to demonstrate its accuracy and its usefulness to estimate boundary conditions with order higher than the traditional Windkessel models. The proposed method is compared to other common estimation techniques, and its robustness in parameter estimation is verified in presence of noisy data and of physiological changes of aortic flow rate induced by mental stress. Conclusion: Results suggest that the proposed method is able to accurately estimate boundary conditions of arbitrary order. Higher order boundary conditions can improve the accuracy of cardiovascular simulations, and Time-Domain Vector Fitting can automatically estimate them.
- Open Access
- 9 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (10) , 1591-1602
Addressing Load Sensitivity of Rational Macromodels
Behavioral models are effective tools used to relieve the computational burden of large-scale system-level simulations. In electrical and electronic applications, the Vector Fitting (VF) iteration often represents the algorithm of choice for generating low order equivalent circuits for complex multiport components in a data-driven setting. Although accurate and reliable in general, macromodels generated via VF are inherently represented in terms of a rational approximation of one specific input-output transfer function of the structure under modeling, e.g., its scattering matrix. However, accuracy in the scattering representation does not necessarily imply a good accuracy when solving the macromodel in a system-level setting, under different termination conditions. In fact, the sensitivity of the macromodel with respect to its loading conditions may be large and needs to be addressed and controlled. In this work, we present a modified VF scheme that overcomes this issue, by introducing in the rational approximation algorithm the requirement that the macromodel remains accurate when interconnected with a known class of admissible networks. The proposed formulation is based on an augmentation of the cost function minimized at each VF iteration; further, it does not require additional expensive data gathering steps when compared to standard approaches. The effectiveness of the scheme is tested over a set of relevant examples, in particular for Power Integrity applications.
- 9 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (10) , 1591-1602
Open AccessAddressing Load Sensitivity of Rational Macromodels
Behavioral models are effective tools used to relieve the computational burden of large-scale system-level simulations. In electrical and electronic applications, the Vector Fitting (VF) iteration often represents the algorithm of choice for generating low order equivalent circuits for complex multiport components in a data-driven setting. Although accurate and reliable in general, macromodels generated via VF are inherently represented in terms of a rational approximation of one specific input-output transfer function of the structure under modeling, e.g., its scattering matrix. However, accuracy in the scattering representation does not necessarily imply a good accuracy when solving the macromodel in a system-level setting, under different termination conditions. In fact, the sensitivity of the macromodel with respect to its loading conditions may be large and needs to be addressed and controlled. In this work, we present a modified VF scheme that overcomes this issue, by introducing in the rational approximation algorithm the requirement that the macromodel remains accurate when interconnected with a known class of admissible networks. The proposed formulation is based on an augmentation of the cost function minimized at each VF iteration; further, it does not require additional expensive data gathering steps when compared to standard approaches. The effectiveness of the scheme is tested over a set of relevant examples, in particular for Power Integrity applications.
- Open Access
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 15786-15804
Data-Driven Extraction of Uniformly Stable and Passive Parameterized Macromodels
A Robust algorithm for the extraction of reduced-order behavioral models from sampled frequency responses is proposed. The system under investigation can be any Linear and Time Invariant structure, although the main emphasis is on devices that are relevant for Signal and Power Integrity and RF design, such as electrical interconnects and integrated passive components. We assume that the device under modeling is parameterized by one or more design variables, which can be related to geometry or materials. Therefore, we seek for multivariate macromodels that reproduce the dynamic behavior over a predefined frequency band, with an explicit embedded dependence of the model equations on these external parameters. Such parameterized macromodels may be used to construct component libraries and prove very useful in fast system-level numerical simulations in time or frequency domain, including optimization, what-if, and sensitivity analysis. The main novel contribution is the formulation of a finite set of convex constraints that are applied during model identification, which provide sufficient conditions for uniform model stability and passivity throughout the parameter space. Such constraints are characterized by an explicit control allowing for a trade-off between model accuracy and runtime, thanks to some special properties of Bernstein polynomials. In summary, we solve the longstanding problem of multivariate stability and passivity enforcement in data-driven model order reduction, which insofar has been tackled only via either overconservative or heuristic and possibly unreliable methods.
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 15786-15804
Open AccessData-Driven Extraction of Uniformly Stable and Passive Parameterized Macromodels
A Robust algorithm for the extraction of reduced-order behavioral models from sampled frequency responses is proposed. The system under investigation can be any Linear and Time Invariant structure, although the main emphasis is on devices that are relevant for Signal and Power Integrity and RF design, such as electrical interconnects and integrated passive components. We assume that the device under modeling is parameterized by one or more design variables, which can be related to geometry or materials. Therefore, we seek for multivariate macromodels that reproduce the dynamic behavior over a predefined frequency band, with an explicit embedded dependence of the model equations on these external parameters. Such parameterized macromodels may be used to construct component libraries and prove very useful in fast system-level numerical simulations in time or frequency domain, including optimization, what-if, and sensitivity analysis. The main novel contribution is the formulation of a finite set of convex constraints that are applied during model identification, which provide sufficient conditions for uniform model stability and passivity throughout the parameter space. Such constraints are characterized by an explicit control allowing for a trade-off between model accuracy and runtime, thanks to some special properties of Bernstein polynomials. In summary, we solve the longstanding problem of multivariate stability and passivity enforcement in data-driven model order reduction, which insofar has been tackled only via either overconservative or heuristic and possibly unreliable methods.
- 15 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Neural Networks and Learning Systems
- Vol. 34 (8) , 5206-5211
Multiclass Sparse Centroids With Application to Fast Time Series Classification
In this article, we propose an efficient multiclass classification scheme based on sparse centroids classifiers. The proposed strategy exhibits linear complexity with respect to both the number of classes and the cardinality of the feature space. The classifier we introduce is based on binary space partitioning, performed by a decision tree where the assignation law at each node is defined via a sparse centroid classifier. We apply the presented strategy to the time series classification problem, showing by experimental evidence that it achieves performance comparable to that of state-of-the-art methods, but with a significantly lower classification time. The proposed technique can be an effective option in resource-constrained environments where the classification time and the computational cost are critical or, in scenarios, where real-time classification is necessary.
- 15 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Neural Networks and Learning Systems
- Vol. 34 (8) , 5206-5211
Multiclass Sparse Centroids With Application to Fast Time Series Classification
In this article, we propose an efficient multiclass classification scheme based on sparse centroids classifiers. The proposed strategy exhibits linear complexity with respect to both the number of classes and the cardinality of the feature space. The classifier we introduce is based on binary space partitioning, performed by a decision tree where the assignation law at each node is defined via a sparse centroid classifier. We apply the presented strategy to the time series classification problem, showing by experimental evidence that it achieves performance comparable to that of state-of-the-art methods, but with a significantly lower classification time. The proposed technique can be an effective option in resource-constrained environments where the classification time and the computational cost are critical or, in scenarios, where real-time classification is necessary.