Alice Le Gall
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alice Le Gall has a total of 213 co-authors. Here are the top co-authors by number of shared publications:
- Ralph D. Lorenz
Johns Hopkins University
6 shared publications - Léa Elise Bonnefoy
LERMA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universités, Univ. Paris Cité, F-75014 Paris, France
5 shared publications - Shannon M. MacKenzie
Applied Physics Laboratory, Johns Hopkins University, Laurel, MD, USA
4 shared publications - Alexander G. Hayes
Cornell University Ithaca NY USA
3 shared publications Cédric Leyrat
3 shared publications- Dirk Plettemeier
Technische Universität Dresden, Dresden, Germany
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19, 34288-34313
Waveform Analysis of Super-Resolved WISDOM/ExoMars GPR Data Acquired in Svalbard, a Terrestrial Analogue of Mars
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19, 34288-34313
Open AccessWaveform Analysis of Super-Resolved WISDOM/ExoMars GPR Data Acquired in Svalbard, a Terrestrial Analogue of Mars
- 25 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-17
Characterization of Titan’s Northern Polar Terrains From Inversion of Cassini RADAR Data
We investigated the surface geophysical properties of Titan through a multi-angular backscattering analysis of Cassini Ku-band radar data acquired in altimetry, SAR, scatterometry and radiometry modes. We test quasi-specular scattering models in combination with a volume scattering formulation to model the backscatter coefficient as a function of incidence angle over specific areas identified from topographic and radar imaging data. From data inversion we found that the exponential model provides the best fit to the observed data. We present our results in terms of effective permittivity, surface roughness and volume scattering albedo across different backscattering uniform regions at Titan’s northern hemisphere, where both radar-bright and -dark terrains have been observed from radar images acquired during the mission. Our results indicate that these bright regions belong to a large low-lying plain made of material with a relatively high dielectric constant, high-volume scattering albedo, and moderate wavelength-scale roughness inferred from the model inversion. In contrast, dark regions are consistent with solid hydrocarbons accumulations, reaching thicknesses of up to hundreds of meters above this plain, and they exhibit a lower dielectric constant, lower volume albedo, and slightly higher wavelength-scale surface roughness together with additional higher meter- to tens-of-meter-scale roughness inferred from altimetry. Finally, we propose some of the most probable scenarios based on a list of candidate materials that may be present at the surface of Titan. Although our analysis focuses on a specific, albeit extensive, region near the North Pole, our findings may offer broader insights into the global distribution of complex organics on Titan surface, which are likely superimposed on top of a mixture of ice and organic material.
- 25 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-17
Characterization of Titan’s Northern Polar Terrains From Inversion of Cassini RADAR Data
We investigated the surface geophysical properties of Titan through a multi-angular backscattering analysis of Cassini Ku-band radar data acquired in altimetry, SAR, scatterometry and radiometry modes. We test quasi-specular scattering models in combination with a volume scattering formulation to model the backscatter coefficient as a function of incidence angle over specific areas identified from topographic and radar imaging data. From data inversion we found that the exponential model provides the best fit to the observed data. We present our results in terms of effective permittivity, surface roughness and volume scattering albedo across different backscattering uniform regions at Titan’s northern hemisphere, where both radar-bright and -dark terrains have been observed from radar images acquired during the mission. Our results indicate that these bright regions belong to a large low-lying plain made of material with a relatively high dielectric constant, high-volume scattering albedo, and moderate wavelength-scale roughness inferred from the model inversion. In contrast, dark regions are consistent with solid hydrocarbons accumulations, reaching thicknesses of up to hundreds of meters above this plain, and they exhibit a lower dielectric constant, lower volume albedo, and slightly higher wavelength-scale surface roughness together with additional higher meter- to tens-of-meter-scale roughness inferred from altimetry. Finally, we propose some of the most probable scenarios based on a list of candidate materials that may be present at the surface of Titan. Although our analysis focuses on a specific, albeit extensive, region near the North Pole, our findings may offer broader insights into the global distribution of complex organics on Titan surface, which are likely superimposed on top of a mixture of ice and organic material.
- 23 December 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 130 (12)
Quantifying the Eruptive Flux on Venus With VenSAR Informed by Observations From Earth and Io
The current volcanic output of Venus is unknown. In the 2030s, the VenSAR (Venus Synthetic Aperture Radar) instrument onboard the European Space Agency's (ESA) EnVision mission will estimate the global volcanic mass flux by looking for new flows with radar imaging at resolutions of 10 or 30 m/pixel, which can be compared with the 1990s‐era Magellan data (100–300 m/pixel). Based on eruptions on Earth and Io, we make suggestions for measuring the Venusian global eruptive flux. We do not need to observe small eruptions with Eruption Magnitude (based on mass) <3 because (at least on Earth) they produce 80% by VenSAR–Magellan. However, only 80% of eruptions may produce a detectable change in radar backscatter based on our examination of 24 basaltic terrestrial lava flows from 2014 to 2023 from the ESA Sentinel‐1a/b satellites. From observed Earth basaltic flows, thickness will rarely be measured on Venus due to low vertical accuracy. If VenSAR images 20%–40% of the most active volcanoes (as planned), it could detect 79%–92% of the flux if the Eruption Magnitude–frequency distribution is similar to Earth and Io. A few eruptions could then be extrapolated to a global flux, but this is dependent on quantifying the largest eruption, so targeting the right volcanoes is critical.
- 23 December 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 130 (12)
Quantifying the Eruptive Flux on Venus With VenSAR Informed by Observations From Earth and Io
The current volcanic output of Venus is unknown. In the 2030s, the VenSAR (Venus Synthetic Aperture Radar) instrument onboard the European Space Agency's (ESA) EnVision mission will estimate the global volcanic mass flux by looking for new flows with radar imaging at resolutions of 10 or 30 m/pixel, which can be compared with the 1990s‐era Magellan data (100–300 m/pixel). Based on eruptions on Earth and Io, we make suggestions for measuring the Venusian global eruptive flux. We do not need to observe small eruptions with Eruption Magnitude (based on mass) <3 because (at least on Earth) they produce 80% by VenSAR–Magellan. However, only 80% of eruptions may produce a detectable change in radar backscatter based on our examination of 24 basaltic terrestrial lava flows from 2014 to 2023 from the ESA Sentinel‐1a/b satellites. From observed Earth basaltic flows, thickness will rarely be measured on Venus due to low vertical accuracy. If VenSAR images 20%–40% of the most active volcanoes (as planned), it could detect 79%–92% of the flux if the Eruption Magnitude–frequency distribution is similar to Earth and Io. A few eruptions could then be extrapolated to a global flux, but this is dependent on quantifying the largest eruption, so targeting the right volcanoes is critical.
- Open Access
- 9 July 2025
- Published by Copernicus GmbH
Investigating Iapetus' dichotomy with multi-wavelength microwave observations
Indubitably, the most dramatic albedo hemispheric dichotomy in the Solar system occurs at Iapetus. Its leading (L) side is covered by an optically low-albedo material, contrasting with its bright trailing (T) side. This dichotomy is also visible at microwave wavelengths, which sense not only the surface but also the subsurface and can thus bring insights into the vertical extent of the dark L side deposit layer and, in general, on the variations with depth of the composition and structure of Iapetus’ subsurface. We here present all available radio maps of Iapetus and the thermal emission model we have develop to interpret them. This model combines a multi-layer thermal and radiative transfer model and its comparison to VLA and Cassini RADAR observations provide new constraints on the physico-chemical properties of both the T and L hemispheres of Iapetus.IntroductionThe origin of Iapetus two-tone coloration has long been controversial; there now seems to be a consensus toward an exogenic deposition of low-albedo materials originating from Phoebe’s vast debris ring that crosses Iapetus’ orbit [e.g., 1, 2, 3]. However, questions remain about the composition and vertical extent of Iapetus’ L hemisphere dark deposit. Measuring the thermal emission from Iapetus at different wavelengths, thus probing different depths, can help answering these questions. In particular, probing the L side of Iapetus at multiple wavelengths in the microwave domain can put a firmer number on the thickness of the dark layer thus bringing key constraints for dynamical models aiming at reproducing dust distribution on Iapetus [e.g., 4].Iapetus radio mapsSince 2018, the Very Large Array telescope (VLA) has been used at several instances to map the thermal emission from Iapetus at wavelengths ranging from 0.9 to 6.0 cm i.e., from the Ka-band to C-band. A total of ~30 hours of observations was collected resulting in 13 radio maps (see 6 of them in Fig. 1). VLA observations only probe Iapetus dayside but with different portions of the L and T sides in the visible disk. To complete the analysis, we also consider 6 data segments collected by the Cassini RADAR acting as a radiometer during 2 targeted flybys of Iapetus (Fig. 1). These data were acquired at a wavelength of 2.2 cm, sometimes at night, and sample either the L or T hemisphere.Both VLA and Cassini spatially-resolved maps show a clear asymmetry in the emitted flux with more flux coming from the L face of Iapetus than from the T face (e.g., May 28, 2018). Yet, the radio maps do no perfectly mimic the optical maps thus bringing complementary informationFig. 1: Radio maps of Iapetus collected by VLA and the Cassini RADAR (Cassini deconvolved maps are from [5]). For each map, the size of the primary beam and the albedo map of the visible disk are indicated.Thermal emission modelThe interpretation of Iapetus’ radio maps requires a thermal emission model combining a thermal model and a transfer radiative model, to produce brightness temperature (in K) maps of Iapetus that can be converted into radiance (erg.cm−2.s−1/sr−1).Model parameters: In bright terrains, Iapetus subsurface is modeled as a homogeneous column of porous water ice. On the L side, we assume a two-layer subsurface with a porous dark layer overlying the ice substrate whose characteristics are the same as those of the bright terrains. More specifically, the model parameters are: the porosity of the dark layer and of the icy substrate , the thickness of the dark layer (which should not exceed a few meters [6]), the composition of the dark material (organics, silicates or a mixture) and the degree of volume scattering in the icy substrate .Thermal model: We adapted the “Multi-layered Implicit Heat Transfer Solver” (MultIHeaTS) [7] to the case of Iapetus. The thermal properties of the subsurface are primarily controlled by and Because the sensed subsurface temperatures are a combination of diurnal and seasonal components, the thermal model is set to provide temperature profiles down to tens of meter depths.RT model: We used the model proposed by [8] for RT in stratified agricultural soils adding a contribution from volume scattering () in the water ice substrate. Composition, and dictate the vertical variations of the subsurface electrical properties. Silicates are more radio absorbing /emitting than organics.Results and discussionEach radio observation is compared to model predictions looking for the parameter combination that best reproduces it (e.g., Fig. 2). One main result is that all observations including the T side point to the need for a significant degree of volume scattering in the water ice substrate (=20-40%). In addition, in most cases, assuming a silicate dark composition provides better fits than organic one. Yet, best-fit models for observations on the L dark side generally underestimate and/or mislocate the peak emission which suggests variations in the thickness of the dust layer (Fig. 3). This will be further investigated. Future work will also focus on adjusting all data together to the model to find the best combination and in particular put a firm constrain on the thickness of the dark layer. Lastly, we will test the hypothesis that some detected cold spots could be associated with geological features such as impact craters.Fig. 2: VLA map of May 28 2018 (left), best-fit model (=1.55) (middle) and residual map. In the model, a uniform value is assumed on the L side.Fig. 3: Visible disk in May 28, 2018 (left) with best-fit model now assuming a thicker dust layer in the centre of the L side (right).References:1. Buratti et al., 2002, Icarus 155, 375–3812. Verbiscer et al., 2009, Nature 461, 1098.3. Dalle Ore et al., 2012, Icarus 221 (2), 735–7434. Tamayo et al. 2011, Icarus 215, 2605. Bonnefoy, 2020, PhD Thesis, Paris Observatory6. Ostro et al., 2006, Icarus 183 (2), 479–490.7. Mergny and Schmidt, 2024,...
- 9 July 2025
- Published by Copernicus GmbH
Open AccessInvestigating Iapetus' dichotomy with multi-wavelength microwave observations
Indubitably, the most dramatic albedo hemispheric dichotomy in the Solar system occurs at Iapetus. Its leading (L) side is covered by an optically low-albedo material, contrasting with its bright trailing (T) side. This dichotomy is also visible at microwave wavelengths, which sense not only the surface but also the subsurface and can thus bring insights into the vertical extent of the dark L side deposit layer and, in general, on the variations with depth of the composition and structure of Iapetus’ subsurface. We here present all available radio maps of Iapetus and the thermal emission model we have develop to interpret them. This model combines a multi-layer thermal and radiative transfer model and its comparison to VLA and Cassini RADAR observations provide new constraints on the physico-chemical properties of both the T and L hemispheres of Iapetus.IntroductionThe origin of Iapetus two-tone coloration has long been controversial; there now seems to be a consensus toward an exogenic deposition of low-albedo materials originating from Phoebe’s vast debris ring that crosses Iapetus’ orbit [e.g., 1, 2, 3]. However, questions remain about the composition and vertical extent of Iapetus’ L hemisphere dark deposit. Measuring the thermal emission from Iapetus at different wavelengths, thus probing different depths, can help answering these questions. In particular, probing the L side of Iapetus at multiple wavelengths in the microwave domain can put a firmer number on the thickness of the dark layer thus bringing key constraints for dynamical models aiming at reproducing dust distribution on Iapetus [e.g., 4].Iapetus radio mapsSince 2018, the Very Large Array telescope (VLA) has been used at several instances to map the thermal emission from Iapetus at wavelengths ranging from 0.9 to 6.0 cm i.e., from the Ka-band to C-band. A total of ~30 hours of observations was collected resulting in 13 radio maps (see 6 of them in Fig. 1). VLA observations only probe Iapetus dayside but with different portions of the L and T sides in the visible disk. To complete the analysis, we also consider 6 data segments collected by the Cassini RADAR acting as a radiometer during 2 targeted flybys of Iapetus (Fig. 1). These data were acquired at a wavelength of 2.2 cm, sometimes at night, and sample either the L or T hemisphere.Both VLA and Cassini spatially-resolved maps show a clear asymmetry in the emitted flux with more flux coming from the L face of Iapetus than from the T face (e.g., May 28, 2018). Yet, the radio maps do no perfectly mimic the optical maps thus bringing complementary informationFig. 1: Radio maps of Iapetus collected by VLA and the Cassini RADAR (Cassini deconvolved maps are from [5]). For each map, the size of the primary beam and the albedo map of the visible disk are indicated.Thermal emission modelThe interpretation of Iapetus’ radio maps requires a thermal emission model combining a thermal model and a transfer radiative model, to produce brightness temperature (in K) maps of Iapetus that can be converted into radiance (erg.cm−2.s−1/sr−1).Model parameters: In bright terrains, Iapetus subsurface is modeled as a homogeneous column of porous water ice. On the L side, we assume a two-layer subsurface with a porous dark layer overlying the ice substrate whose characteristics are the same as those of the bright terrains. More specifically, the model parameters are: the porosity of the dark layer and of the icy substrate , the thickness of the dark layer (which should not exceed a few meters [6]), the composition of the dark material (organics, silicates or a mixture) and the degree of volume scattering in the icy substrate .Thermal model: We adapted the “Multi-layered Implicit Heat Transfer Solver” (MultIHeaTS) [7] to the case of Iapetus. The thermal properties of the subsurface are primarily controlled by and Because the sensed subsurface temperatures are a combination of diurnal and seasonal components, the thermal model is set to provide temperature profiles down to tens of meter depths.RT model: We used the model proposed by [8] for RT in stratified agricultural soils adding a contribution from volume scattering () in the water ice substrate. Composition, and dictate the vertical variations of the subsurface electrical properties. Silicates are more radio absorbing /emitting than organics.Results and discussionEach radio observation is compared to model predictions looking for the parameter combination that best reproduces it (e.g., Fig. 2). One main result is that all observations including the T side point to the need for a significant degree of volume scattering in the water ice substrate (=20-40%). In addition, in most cases, assuming a silicate dark composition provides better fits than organic one. Yet, best-fit models for observations on the L dark side generally underestimate and/or mislocate the peak emission which suggests variations in the thickness of the dust layer (Fig. 3). This will be further investigated. Future work will also focus on adjusting all data together to the model to find the best combination and in particular put a firm constrain on the thickness of the dark layer. Lastly, we will test the hypothesis that some detected cold spots could be associated with geological features such as impact craters.Fig. 2: VLA map of May 28 2018 (left), best-fit model (=1.55) (middle) and residual map. In the model, a uniform value is assumed on the L side.Fig. 3: Visible disk in May 28, 2018 (left) with best-fit model now assuming a thicker dust layer in the centre of the L side (right).References:1. Buratti et al., 2002, Icarus 155, 375–3812. Verbiscer et al., 2009, Nature 461, 1098.3. Dalle Ore et al., 2012, Icarus 221 (2), 735–7434. Tamayo et al. 2011, Icarus 215, 2605. Bonnefoy, 2020, PhD Thesis, Paris Observatory6. Ostro et al., 2006, Icarus 183 (2), 479–490.7. Mergny and Schmidt, 2024,...
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Advanced Interpretation Tools for WISDOM, the ExoMars GPR : Validation on Experimental Data Acquired in Svalbard, a Martian Analogue
This paper presents three advanced processing tools for the preparation of the interpretation of WISDOM (Water Ice Subsurface Deposits Observation on Mars) polarimetric GPR (Ground Penetrating Radar) data on Mars. WISDOM is the GPR onboard Rosalind Franklin rover from ExoMars mission, which should land on Mars in 2030. The advanced interpretation tools are tested and validated on data acquired in a Martian analogue to earth; on Svalbard, Norway. The first tool is the use of FDTD simulation on 3D geo-electric models for a more detailed interpretation of GPR data. The second tool is the additive RGB synthesis to display the WISDOM data acquired in 4 different linear polarizations. The last tool is the Bandwidth Extrapolation Technique to enhance the range resolution of the instrument by a factor 3, reaching range resolution $\leq 3 ~\text{cm}$ in a typical Martian soil of permittivity $\varepsilon^{\prime}=3.2$. All these techniques show promising results for the interpretation of WISDOM data acquired above structures with complex geometries and/or fine layering.- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Advanced Interpretation Tools for WISDOM, the ExoMars GPR : Validation on Experimental Data Acquired in Svalbard, a Martian Analogue
This paper presents three advanced processing tools for the preparation of the interpretation of WISDOM (Water Ice Subsurface Deposits Observation on Mars) polarimetric GPR (Ground Penetrating Radar) data on Mars. WISDOM is the GPR onboard Rosalind Franklin rover from ExoMars mission, which should land on Mars in 2030. The advanced interpretation tools are tested and validated on data acquired in a Martian analogue to earth; on Svalbard, Norway. The first tool is the use of FDTD simulation on 3D geo-electric models for a more detailed interpretation of GPR data. The second tool is the additive RGB synthesis to display the WISDOM data acquired in 4 different linear polarizations. The last tool is the Bandwidth Extrapolation Technique to enhance the range resolution of the instrument by a factor 3, reaching range resolution $\leq 3 ~\text{cm}$ in a typical Martian soil of permittivity $\varepsilon^{\prime}=3.2$. All these techniques show promising results for the interpretation of WISDOM data acquired above structures with complex geometries and/or fine layering.- Open Access
- 3 July 2024
- Published by Copernicus GmbH
Iapetus: Investigating the most dramatic hemispheric dichotomy in the Solar system with radio observations
Introduction Saturn’s icy satellites, in synchronous rotation around Saturn, often display large differences between their leading (L) and trailing (T) sides, which interact differently with their orbital environment and, in particular, with Saturn’s dust rings. Indubitably, the most dramatic hemispheric dichotomy in the Saturnian system occurs at Iapetus, whose T side and poles are about an order of magnitude optically brighter than most of its L hemisphere. The origin of this two-tone coloration has long been controversial; thanks to the observations of the Cassini mission which explored the Saturnian system from 2004 to 2017, there now seems to be a consensus toward an exogenic deposition of low-albedo materials originating from Phoebe’s vast debris ring that crosses Iapetus’ orbit [e.g., 1, 2, 3]. However, questions remain about the composition and vertical extent of Iapetus’ L hemisphere dark deposit. Measuring the thermal emission from Iapetus at different wavelengths, thus probing different depths, can help answering these questions. In particular, probing the L side of Iapetus at multiple centimetric wavelengths can put a firmer number on the thickness of the dark layer thus bringing key constraints for dynamical models aiming at reproducing dust distribution on Iapetus [e.g., 4]. That is why, in 2017, we have launched an observing campaign to collect spatially-resolved observations of Iapetus from the Jansky VLA (Very Large Array) telescope. So far, a total of 30 hours of observations were collected [5].Radio maps of Iapetus The VLA telescope is an interferometry radio-telescope consisting of 28 antennas organized in a Y shape in the plains of San Agustin in New Mexico, USA. Since 2018, it was used to measure the thermal emission from Iapetus at various wavelengths from 0.7 to 6.0 cm i.e., in the Q, Ka, K, Ku, X and C bands. A total of 11 radio maps were built from these observations; Fig 1 displays 7 of them. They all probe Iapetus dayside, considering the location of the Saturn system and the Earth in relation to the Sun but with different portions of the leading side in the visible disk. The most resolved maps (28 May and 3 June 2018) show an asymmetry in the emitted flux with more flux coming from the dark face of Iapetus than from the bright face, implying that the latter is colder or at least less emissive. In addition to VLA observations, Iapetus’s thermal emission was also mapped in 2007 by the radiometer on board the Cassini probe at 2.2 cm [6].Fig. 1: Maps of Iapetus’ thermal flux collected in 2018, 2019 and 2021 from the JVLA (Very Large Array telescope, New Mexico, USA) at different wavelengths/bands in the microwave domain. Insets indicate the size of the primary beam and the albedo map of the visible disk.Thermal emission modelThe interpretation of VLA maps requires a thermal emission model. The model we developed combines a thermal model, providing the physical temperatures profiles (K) in Iapetus’ subsurface at different latitudes and longitudes, a transfer radiative model, to produce brightness temperature (K) maps of Iapetus which can be converted into radiance (erg.cm−2.s−1/sr−1) and then integrated over the beam (flux in Jy/beam) associated to each observation.Thermal model - We adapted a multilayer model called “Multi-layered Implicit Heat Transfer Solver” (MultIHeaTS) [7] to the case of Iapetus. The unique source of heat is the Solar flux. The leading side subsurface consists in a top layer (the dark dust layer) overlying a bottom layer (the water ice crust) while a water ice monolayer is assumed for the trailing side. The main parameters of the bi-layer model are the porosities of each layer (which primarily controls the effective thermal inertia) and the thickness of the top layer (which, based on ground-based observations from the Arecibo 12.6-cm radar system should not exceed a few meters [8]). At cm wavelengths, the emission depth is expected to be larger than the depth of penetration of the diurnally-varying solar insolation. As a consequence, the sensed subsurface temperatures are a combination of diurnal and seasonal components and the thermal model is set to provide temperature profiles down to tens of meter depths.RT model - We tested two multi-layer radiative transfer models: (i) a model proposed by [9] for RT in stratified agricultural soils which assumes smooth and flat buried interfaces with no scattering within the layers, (ii) the Snow Microwave Radiative Transfer (SMRT) model designed for snow or sea-ice [10], which considers wave scattering, absorption, reflection, and transmission. Both models take as inputs temperature profiles and their main parameter is the complex dielectric permittivity of the dark dust.Preliminary resultsIn this presentation, we will compare observations to model predictions for various combinations of parameters looking for the parameter combination that best reproduces the observations. As an example, Fig. 2a shows the best-fit model for the observation of May 28, 2018; it was obtained for a dark layer of thickness 1 cm and made of organic materials with the [9] model. The L/T asymmetry is well reproduced but the residual map suggests that the emissivity of the T side is overestimated by the model while it is the opposite on the L side (Fig. 2b). This likely like indicates that volume scattering in the water ice crust cannot be neglected. Predictions using the [10] model should therefore lead to better fits. Fig. 2: (a) Best-fit model for the observation of May 28, 2018. (b) Residual map (data-model). References1. Buratti et al., 2002, Icarus 155, 375–3812. Verbiscer et al., 2009, Nature 461, 1098.3. Dalle Ore et al., 2012, Icarus 221 (2), 735–7434. Tamayo et al. 2011, Icarus 215, 2605. Bonnefoy et al., 2024, Icarus 41, 1159506. Le Gall et al., 2014, Icarus 241, 221–2387. Mergny and Schmidt, submitted8. Ostro et...
- 3 July 2024
- Published by Copernicus GmbH
Open AccessIapetus: Investigating the most dramatic hemispheric dichotomy in the Solar system with radio observations
Introduction Saturn’s icy satellites, in synchronous rotation around Saturn, often display large differences between their leading (L) and trailing (T) sides, which interact differently with their orbital environment and, in particular, with Saturn’s dust rings. Indubitably, the most dramatic hemispheric dichotomy in the Saturnian system occurs at Iapetus, whose T side and poles are about an order of magnitude optically brighter than most of its L hemisphere. The origin of this two-tone coloration has long been controversial; thanks to the observations of the Cassini mission which explored the Saturnian system from 2004 to 2017, there now seems to be a consensus toward an exogenic deposition of low-albedo materials originating from Phoebe’s vast debris ring that crosses Iapetus’ orbit [e.g., 1, 2, 3]. However, questions remain about the composition and vertical extent of Iapetus’ L hemisphere dark deposit. Measuring the thermal emission from Iapetus at different wavelengths, thus probing different depths, can help answering these questions. In particular, probing the L side of Iapetus at multiple centimetric wavelengths can put a firmer number on the thickness of the dark layer thus bringing key constraints for dynamical models aiming at reproducing dust distribution on Iapetus [e.g., 4]. That is why, in 2017, we have launched an observing campaign to collect spatially-resolved observations of Iapetus from the Jansky VLA (Very Large Array) telescope. So far, a total of 30 hours of observations were collected [5].Radio maps of Iapetus The VLA telescope is an interferometry radio-telescope consisting of 28 antennas organized in a Y shape in the plains of San Agustin in New Mexico, USA. Since 2018, it was used to measure the thermal emission from Iapetus at various wavelengths from 0.7 to 6.0 cm i.e., in the Q, Ka, K, Ku, X and C bands. A total of 11 radio maps were built from these observations; Fig 1 displays 7 of them. They all probe Iapetus dayside, considering the location of the Saturn system and the Earth in relation to the Sun but with different portions of the leading side in the visible disk. The most resolved maps (28 May and 3 June 2018) show an asymmetry in the emitted flux with more flux coming from the dark face of Iapetus than from the bright face, implying that the latter is colder or at least less emissive. In addition to VLA observations, Iapetus’s thermal emission was also mapped in 2007 by the radiometer on board the Cassini probe at 2.2 cm [6].Fig. 1: Maps of Iapetus’ thermal flux collected in 2018, 2019 and 2021 from the JVLA (Very Large Array telescope, New Mexico, USA) at different wavelengths/bands in the microwave domain. Insets indicate the size of the primary beam and the albedo map of the visible disk.Thermal emission modelThe interpretation of VLA maps requires a thermal emission model. The model we developed combines a thermal model, providing the physical temperatures profiles (K) in Iapetus’ subsurface at different latitudes and longitudes, a transfer radiative model, to produce brightness temperature (K) maps of Iapetus which can be converted into radiance (erg.cm−2.s−1/sr−1) and then integrated over the beam (flux in Jy/beam) associated to each observation.Thermal model - We adapted a multilayer model called “Multi-layered Implicit Heat Transfer Solver” (MultIHeaTS) [7] to the case of Iapetus. The unique source of heat is the Solar flux. The leading side subsurface consists in a top layer (the dark dust layer) overlying a bottom layer (the water ice crust) while a water ice monolayer is assumed for the trailing side. The main parameters of the bi-layer model are the porosities of each layer (which primarily controls the effective thermal inertia) and the thickness of the top layer (which, based on ground-based observations from the Arecibo 12.6-cm radar system should not exceed a few meters [8]). At cm wavelengths, the emission depth is expected to be larger than the depth of penetration of the diurnally-varying solar insolation. As a consequence, the sensed subsurface temperatures are a combination of diurnal and seasonal components and the thermal model is set to provide temperature profiles down to tens of meter depths.RT model - We tested two multi-layer radiative transfer models: (i) a model proposed by [9] for RT in stratified agricultural soils which assumes smooth and flat buried interfaces with no scattering within the layers, (ii) the Snow Microwave Radiative Transfer (SMRT) model designed for snow or sea-ice [10], which considers wave scattering, absorption, reflection, and transmission. Both models take as inputs temperature profiles and their main parameter is the complex dielectric permittivity of the dark dust.Preliminary resultsIn this presentation, we will compare observations to model predictions for various combinations of parameters looking for the parameter combination that best reproduces the observations. As an example, Fig. 2a shows the best-fit model for the observation of May 28, 2018; it was obtained for a dark layer of thickness 1 cm and made of organic materials with the [9] model. The L/T asymmetry is well reproduced but the residual map suggests that the emissivity of the T side is overestimated by the model while it is the opposite on the L side (Fig. 2b). This likely like indicates that volume scattering in the water ice crust cannot be neglected. Predictions using the [10] model should therefore lead to better fits. Fig. 2: (a) Best-fit model for the observation of May 28, 2018. (b) Residual map (data-model). References1. Buratti et al., 2002, Icarus 155, 375–3812. Verbiscer et al., 2009, Nature 461, 1098.3. Dalle Ore et al., 2012, Icarus 221 (2), 735–7434. Tamayo et al. 2011, Icarus 215, 2605. Bonnefoy et al., 2024, Icarus 41, 1159506. Le Gall et al., 2014, Icarus 241, 221–2387. Mergny and Schmidt, submitted8. Ostro et...
- Open Access
- 2 May 2024
- Published by Copernicus GmbH
Measurement of Titan’s surface permittivity with the DraGMet/DIEL sensor on Dragonfly
Titan, Saturn’s biggest moon, is an ocean world, covered by organic materials and therefore one of the most promising astrobiological target in the Solar System, likely holding clues on the origin of life on Earth. That is why NASA has selected the Dragonfly mission to send in 2027 a rotorcraft lander to Titan and investigate its prebiotic chemistry and habitability. Making multiple flights (up to 24 in 2.5 years, starting in 2034), Dragonfly will explore a variety of locations, from the Shangri-La dune field to the rim of the young impact crater Selk (Lorenz et al., 2018), and therefore sample materials and determine surface properties in different geologic settings. The two permittivity probes - called DIEL- on board the Geophysical and Meteorological package (DraGMet) will be especially useful to characterize Dragonfly landing site environment. DIEL consist of 2 electrodes acting as self-impedance permittivity probes. They will be mounted on each skid of the Dragonfly rotorcraft and operate independently for sake of redundancy and safety. Their objective is to measure the complex ground permittivity at several low frequencies (
- 2 May 2024
- Published by Copernicus GmbH
Open AccessMeasurement of Titan’s surface permittivity with the DraGMet/DIEL sensor on Dragonfly
Titan, Saturn’s biggest moon, is an ocean world, covered by organic materials and therefore one of the most promising astrobiological target in the Solar System, likely holding clues on the origin of life on Earth. That is why NASA has selected the Dragonfly mission to send in 2027 a rotorcraft lander to Titan and investigate its prebiotic chemistry and habitability. Making multiple flights (up to 24 in 2.5 years, starting in 2034), Dragonfly will explore a variety of locations, from the Shangri-La dune field to the rim of the young impact crater Selk (Lorenz et al., 2018), and therefore sample materials and determine surface properties in different geologic settings. The two permittivity probes - called DIEL- on board the Geophysical and Meteorological package (DraGMet) will be especially useful to characterize Dragonfly landing site environment. DIEL consist of 2 electrodes acting as self-impedance permittivity probes. They will be mounted on each skid of the Dragonfly rotorcraft and operate independently for sake of redundancy and safety. Their objective is to measure the complex ground permittivity at several low frequencies (
- Open Access
- 22 March 2024
- Published by Taylor & Francis in Journal of Maps
- Vol. 20 (1)
The high-resolution map of Oxia Planum, Mars; the landing site of the ExoMars Rosalind Franklin rover mission
- 22 March 2024
- Published by Taylor & Francis in Journal of Maps
- Vol. 20 (1)
Open AccessThe high-resolution map of Oxia Planum, Mars; the landing site of the ExoMars Rosalind Franklin rover mission
- Open Access
Detection and characterization of wind-blown charged sand grains on Titan with the DraGMet/EFIELD experiment on Dragonfly
The EFIELD instrument is part of the geophysics and meteorology sensor package DraGMet on the Dragonfly mission, which will explore the surface of Titan in the mid-2030s. EFIELD consists of two electrodes designed to passively record the AC electric field at each landing site. The exploration zone of Dragonfly will mostly consist of dune fields, covered with sand grains. Little is known on the properties of these grains, although Cassini-Huygens observations suggest they are mostly made of organic material produced by Titan's atmospheric photochemistry and evolved at the surface. Little is known also about dune formation and in general about the transport of sediments by winds. The latter much depends on inter-particle forces and therefore on how grains are charged by friction. We demonstrate here that the EFIELD experiment can bring new insights on these questions. We have developed a hydrodynamic-electrostatic model to simulate the trajectory of a wind-blown charged sand grain in the vicinity of an idealized EFIELD probe and to predict how such a grain flying close to the probe would affect its potential. We show that, in some conditions, the resulting perturbation will be strong enough to be detected by the EFIELD probe. More specifically, we find that the detection of typical charged wind-blown grains (200 microns) on Titan requires an instrument standard deviation noise inferior to 1mV, though occasional larger grains flying close to one electrode could be detected with a higher noise level. Furthermore, we propose a method to retrieve information on the charge and velocity of wind-blown charged grains detected by the EFIELD experiment. This method well applies for cases where the particle trajectory can be regarded as quasi-linear. We validate our inversion approach on both synthetic and experimental data obtained with a laboratory prototype of the EFIELD experiment.
Open AccessDetection and characterization of wind-blown charged sand grains on Titan with the DraGMet/EFIELD experiment on Dragonfly
The EFIELD instrument is part of the geophysics and meteorology sensor package DraGMet on the Dragonfly mission, which will explore the surface of Titan in the mid-2030s. EFIELD consists of two electrodes designed to passively record the AC electric field at each landing site. The exploration zone of Dragonfly will mostly consist of dune fields, covered with sand grains. Little is known on the properties of these grains, although Cassini-Huygens observations suggest they are mostly made of organic material produced by Titan's atmospheric photochemistry and evolved at the surface. Little is known also about dune formation and in general about the transport of sediments by winds. The latter much depends on inter-particle forces and therefore on how grains are charged by friction. We demonstrate here that the EFIELD experiment can bring new insights on these questions. We have developed a hydrodynamic-electrostatic model to simulate the trajectory of a wind-blown charged sand grain in the vicinity of an idealized EFIELD probe and to predict how such a grain flying close to the probe would affect its potential. We show that, in some conditions, the resulting perturbation will be strong enough to be detected by the EFIELD probe. More specifically, we find that the detection of typical charged wind-blown grains (200 microns) on Titan requires an instrument standard deviation noise inferior to 1mV, though occasional larger grains flying close to one electrode could be detected with a higher noise level. Furthermore, we propose a method to retrieve information on the charge and velocity of wind-blown charged grains detected by the EFIELD experiment. This method well applies for cases where the particle trajectory can be regarded as quasi-linear. We validate our inversion approach on both synthetic and experimental data obtained with a laboratory prototype of the EFIELD experiment.
- Open Access
- 1 March 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (3) , 44
Updated Radiative Transfer Model for Titan in the Near-infrared Wavelength Range: Validation against Huygens Atmospheric and Surface Measurements and Application to the Cassini/VIMS Observations of the Dragonfly Landing Area
We present an analysis of Titan data acquired by the Cassini Visual and Infrared Mapping Spectrometer (VIMS) at the landing site of the Dragonfly mission, using a new version of our radiative transfer model for Titan, with significant updates for the spectroscopic parameters of atmospheric gases and photochemical aerosols. Our updated radiative transfer model is validated against the in situ spectroscopic measurements of the Huygens probe during its descent and once landed. We confirm that aerosols with a fractal dimension of 2.3–2.4 provide the best fit to the observations. We apply our radiative transfer model to four VIMS data cubes over the Selk crater region including the Dragonfly landing and exploration areas, further validating our model by producing consistent aerosol population and surface albedo maps. These infrared albedo maps, further corrected from the photometry, enable us to study the Selk crater region in terms of surface composition, landscape formation, and evolution. Our results suggest that the Selk crater is in an intermediate state of degradation and that the mountainous terrains of the area (including the crater rim and ejecta) are likely to be dominated by fine grains of tholin-like sediment. This organic sediment would be transported to the lowlands (crater floor and surrounding plains), possibly with water ice particles, by rivers, and further deposited and processed to form the sand particles that feed the neighboring dune fields. These results provide information for the operational and scientific preparation of the Dragonfly mission, paving the way for future exploration of Titan’s surface composition and geology.
- 1 March 2023
- Published by American Astronomical Society in The Planetary Science Journal
- Vol. 4 (3) , 44
Open AccessUpdated Radiative Transfer Model for Titan in the Near-infrared Wavelength Range: Validation against Huygens Atmospheric and Surface Measurements and Application to the Cassini/VIMS Observations of the Dragonfly Landing Area
We present an analysis of Titan data acquired by the Cassini Visual and Infrared Mapping Spectrometer (VIMS) at the landing site of the Dragonfly mission, using a new version of our radiative transfer model for Titan, with significant updates for the spectroscopic parameters of atmospheric gases and photochemical aerosols. Our updated radiative transfer model is validated against the in situ spectroscopic measurements of the Huygens probe during its descent and once landed. We confirm that aerosols with a fractal dimension of 2.3–2.4 provide the best fit to the observations. We apply our radiative transfer model to four VIMS data cubes over the Selk crater region including the Dragonfly landing and exploration areas, further validating our model by producing consistent aerosol population and surface albedo maps. These infrared albedo maps, further corrected from the photometry, enable us to study the Selk crater region in terms of surface composition, landscape formation, and evolution. Our results suggest that the Selk crater is in an intermediate state of degradation and that the mountainous terrains of the area (including the crater rim and ejecta) are likely to be dominated by fine grains of tholin-like sediment. This organic sediment would be transported to the lowlands (crater floor and surrounding plains), possibly with water ice particles, by rivers, and further deposited and processed to form the sand particles that feed the neighboring dune fields. These results provide information for the operational and scientific preparation of the Dragonfly mission, paving the way for future exploration of Titan’s surface composition and geology.