Ahmad Nasirudin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ahmad Nasirudin has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- I. Ketut Aria Pria Utama
Department of Naval Architecture, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember (ITS), Surabaya 60111, Indonesia
5 shared publications - Rizky Chandra Ariesta
Institut Teknologi Sepuluh Nopember
2 shared publications - Andreas Kukuh Priyasambada
Department of Naval Architecture, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember (ITS), Surabaya 60111, Indonesia
1 shared publication - Bagiyo Suwasono
Postgraduate Program of Marine Coastal Engineering, Universitas Hang Tuah, Surabaya, East Java, Indonesia
1 shared publication - Bimo Hadi Putro
Department of Naval Architecture, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia, 60111
1 shared publication Charis Febriyan Triaditya
Department of Naval Architecture, Faculty of Marine Technology, Sepuluh Nopember Institute of Technology, Surabaya, Indonesia
1 shared publication
Latest Publications
- 1 November 2024
- Published by University of Dubrovnik in Naše more
- Vol. 71 (2) , 54-65
Numerical Analysis of Drag Characteristics of 209 Submarine with Various Roughness Distribution
Submarines and other underwater vessels are widely employed in the naval sector for defense purposes as well as in the civilian realm for scientific and recreational purposes. However, challenges such as biofouling caused by bacteria and algae can significantly impact performance and environmental effects. This study investigated the impact of biofouling on the U209 submarine by analysing how the location of roughness affects drag, with particular emphasis on frictional drag. Computational Fluid Dynamics (CFD) was employed to assess the impact of biofouling on the turbulent flow characteristics of ship hull surfaces with varying roughness, operating within the range of velocity = 9.7 knot – 29.1 knot. The submarine analysis was conducted under complete submersion without any water disturbance. The increase in drag resulted from the variation in the surface of the submarine hull. The drag increased from 8.5% to 18.2% for partial hull roughness and from 30.5% to 46.9% for overall roughness. The entire surface irregularity of the hull led to a significant increase in the drag. This can be explained by the results that as the surface area affected by biofouling increases, the amount of turbulent flow around the hull also increases, resulting in greater resistance, particularly in terms of frictional drag.
- 1 November 2024
- Published by University of Dubrovnik in Naše more
- Vol. 71 (2) , 54-65
Numerical Analysis of Drag Characteristics of 209 Submarine with Various Roughness Distribution
Submarines and other underwater vessels are widely employed in the naval sector for defense purposes as well as in the civilian realm for scientific and recreational purposes. However, challenges such as biofouling caused by bacteria and algae can significantly impact performance and environmental effects. This study investigated the impact of biofouling on the U209 submarine by analysing how the location of roughness affects drag, with particular emphasis on frictional drag. Computational Fluid Dynamics (CFD) was employed to assess the impact of biofouling on the turbulent flow characteristics of ship hull surfaces with varying roughness, operating within the range of velocity = 9.7 knot – 29.1 knot. The submarine analysis was conducted under complete submersion without any water disturbance. The increase in drag resulted from the variation in the surface of the submarine hull. The drag increased from 8.5% to 18.2% for partial hull roughness and from 30.5% to 46.9% for overall roughness. The entire surface irregularity of the hull led to a significant increase in the drag. This can be explained by the results that as the surface area affected by biofouling increases, the amount of turbulent flow around the hull also increases, resulting in greater resistance, particularly in terms of frictional drag.
- 3 August 2024
- Published by Springer Nature
- p. 163-169
Review of the Use of Wind and Solar Energy for Powering Small- and Medium-Sized Vessels, the Case of Indonesia
- 3 August 2024
- Published by Springer Nature
- p. 163-169
Review of the Use of Wind and Solar Energy for Powering Small- and Medium-Sized Vessels, the Case of Indonesia
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3219 (1) , 040004
Slow steaming in ships: A case study in decarbonizing issues
One of the methods adopted in ship operations to conserve energy usage and decrease greenhouse gas emissions (GHG) is Slow Steaming. To investigate its impact o One of the methods adopted in ship operations to conserve energy usage and decrease greenhouse gas emissions (GHG) is Slow Steaming. To investigate its impact o
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3219 (1) , 040004
Slow steaming in ships: A case study in decarbonizing issues
One of the methods adopted in ship operations to conserve energy usage and decrease greenhouse gas emissions (GHG) is Slow Steaming. To investigate its impact o One of the methods adopted in ship operations to conserve energy usage and decrease greenhouse gas emissions (GHG) is Slow Steaming. To investigate its impact o
- Open Access
- 28 June 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (7) , 1312
CFD Analysis of Biofouling Effect on Submarine Resistance and Wake
It is well known that biofouling increases a ship’s resistance and nominal wake. For submarines, any change to the circumferential variation of the nominal wake in the propeller plane will affect the variation of the flow over the propeller blade, and hence the fluctuating forces, and noise, generated by the propeller. The ANSYS FLUENT commercial Reynolds-Averaged Navier Stokes Computational Fluid Dynamics solver was used to investigate the influence of both the longitudinal and vertical distribution of biofouling on the resistance and wake, including the circumferential variation of the nominal wake, on a submarine, using the well-known Suboff standard submarine. For the present work, the k-ε turbulence model was selected, as this is commonly used in this field and is generally considered acceptable. To handle different boundary layer thicknesses in the flow fields, the whole y+ formulation was employed, enabling automatic switching between low and high Reynolds boundary wall models. The numerical solver used for the simulations is based on the finite volume method, which discretizes the RANS equations. In this approach, a segregated model was utilized in the solver, and the convection terms were discretized using the second-order upwind scheme to enhance solution accuracy. The criteria for the near wall are between 30 and 100, and the value of y+ for the present case is 84. It is shown that fouling over only the forward third of the submarine results in a greater increase in resistance than fouling over only the aft third. Fouling over only the lower half of the submarine results in greater resistance than fouling over only the forward third, but less than fouling over the whole of the hull. Fouling over only the forward third of the hull has less influence on the circumferential variation of the wake than fouling over the aft third only of the hull. The results show the importance of keeping the forward area of the hull clean when considering resistance only, whereas keeping the aft area of the hull clean is important when considering the uniformity of the nominal wake into the propeller.
- 28 June 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (7) , 1312
Open AccessCFD Analysis of Biofouling Effect on Submarine Resistance and Wake
It is well known that biofouling increases a ship’s resistance and nominal wake. For submarines, any change to the circumferential variation of the nominal wake in the propeller plane will affect the variation of the flow over the propeller blade, and hence the fluctuating forces, and noise, generated by the propeller. The ANSYS FLUENT commercial Reynolds-Averaged Navier Stokes Computational Fluid Dynamics solver was used to investigate the influence of both the longitudinal and vertical distribution of biofouling on the resistance and wake, including the circumferential variation of the nominal wake, on a submarine, using the well-known Suboff standard submarine. For the present work, the k-ε turbulence model was selected, as this is commonly used in this field and is generally considered acceptable. To handle different boundary layer thicknesses in the flow fields, the whole y+ formulation was employed, enabling automatic switching between low and high Reynolds boundary wall models. The numerical solver used for the simulations is based on the finite volume method, which discretizes the RANS equations. In this approach, a segregated model was utilized in the solver, and the convection terms were discretized using the second-order upwind scheme to enhance solution accuracy. The criteria for the near wall are between 30 and 100, and the value of y+ for the present case is 84. It is shown that fouling over only the forward third of the submarine results in a greater increase in resistance than fouling over only the aft third. Fouling over only the lower half of the submarine results in greater resistance than fouling over only the forward third, but less than fouling over the whole of the hull. Fouling over only the forward third of the hull has less influence on the circumferential variation of the wake than fouling over the aft third only of the hull. The results show the importance of keeping the forward area of the hull clean when considering resistance only, whereas keeping the aft area of the hull clean is important when considering the uniformity of the nominal wake into the propeller.
- Open Access
- 1 June 2023
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1198 (1) , 012029
Optimization design of remotely operated vehicle (ROV) for Madura Strait Area
Nowadays, the development of unmanned vehicles is significantly increased. Since the remotely operated vehicle (ROV) has more advantages than Diver. Then, ROV has an important role in underwater inspection and research in various sectors, such as offshore infrastructure development. ROV will give some critical information to the operator about an underwater inspection like bathymetry, pipeline inspection, and the other crucial subsea structure that the divers can’t reach. The optimization design has been carried out to determine ROV operational requirements in Madura Strait by Total-Based Method. ROV will be divided into 3 leading function groups, they are Features, Survive and Operate. Every group will be divided into Function Breakdown Structure (FBS). FBS will be divided again into Work Breakdown Structure (WBS). The optimum design will be determined by linking every breakdown function. The results are the ROV has 2MP 1080P resolution for camera, 2000 lumens for lighting, 50 m detection area for sonar and echosounder, 100 N grip force for Gripper, equipped with stainless steel frame, 2 hours long for operational duration, 5kg.f for thruster, operated with cable 300 m long and equipped with 6-unit thruster.
- 1 June 2023
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1198 (1) , 012029
Open AccessOptimization design of remotely operated vehicle (ROV) for Madura Strait Area
Nowadays, the development of unmanned vehicles is significantly increased. Since the remotely operated vehicle (ROV) has more advantages than Diver. Then, ROV has an important role in underwater inspection and research in various sectors, such as offshore infrastructure development. ROV will give some critical information to the operator about an underwater inspection like bathymetry, pipeline inspection, and the other crucial subsea structure that the divers can’t reach. The optimization design has been carried out to determine ROV operational requirements in Madura Strait by Total-Based Method. ROV will be divided into 3 leading function groups, they are Features, Survive and Operate. Every group will be divided into Function Breakdown Structure (FBS). FBS will be divided again into Work Breakdown Structure (WBS). The optimum design will be determined by linking every breakdown function. The results are the ROV has 2MP 1080P resolution for camera, 2000 lumens for lighting, 50 m detection area for sonar and echosounder, 100 N grip force for Gripper, equipped with stainless steel frame, 2 hours long for operational duration, 5kg.f for thruster, operated with cable 300 m long and equipped with 6-unit thruster.
- Open Access
- 20 April 2023
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 15 (6) , 54-64
CFD Analysis into the Resistance Estimation of Hard-Chine Monohull using Conventional against Inverted Bows
There are many ways that ship designers can do to get the minimum engine power with the desire ship speed. One of the ways is to design the bow shape with the aim of minimizing ship resistance. In this study, the ship resistance of hard-chine monohull with two different bow shapes that conventional and inverted bows are analyzed. CFD (Computational Fluid Dynamics) approach by using Shear Stress Transport (SST) as turbulence model is used. Different ship speed by Froude numbers Fr 0.2 to 0.7 is applied. The simulation results give convincing evidence that the inverted bow produces lower total resistance compared to the conventional one by about 5% reduction
- 20 April 2023
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 15 (6) , 54-64
Open AccessCFD Analysis into the Resistance Estimation of Hard-Chine Monohull using Conventional against Inverted Bows
There are many ways that ship designers can do to get the minimum engine power with the desire ship speed. One of the ways is to design the bow shape with the aim of minimizing ship resistance. In this study, the ship resistance of hard-chine monohull with two different bow shapes that conventional and inverted bows are analyzed. CFD (Computational Fluid Dynamics) approach by using Shear Stress Transport (SST) as turbulence model is used. Different ship speed by Froude numbers Fr 0.2 to 0.7 is applied. The simulation results give convincing evidence that the inverted bow produces lower total resistance compared to the conventional one by about 5% reduction
- Open Access
- 22 February 2023
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Journal of Marine-Earth Science and Technology
- Vol. 3 (3) , 86-89
SHIP LIGHTWEIGHT ESTIMATION AT CONCEPT DESIGN STAGE: CASE OF INDONESIA SINGLE ENDED RO-RO FERRIES
In recent years there have been many crossing vessels, especially those designed and built domestically. At the concept design stage, designers generally use the parent ship design method to determine the main dimension by taking one example of a reference ship with specifications close to the owner's requirements. However, this will be an obstacle if the existing ship specifications are unavailable, so designers must be able to perform initial calculations, especially predictions of the Lightweight (LWT). This paper introduces empirical formulas that utilize regression analysis to estimate LWT of Indonesia Single Ended Ro-Ro ferries. The formula of LWT based on Gross Tonnage (GT) requirements are presented.
- 22 February 2023
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Journal of Marine-Earth Science and Technology
- Vol. 3 (3) , 86-89
Open AccessSHIP LIGHTWEIGHT ESTIMATION AT CONCEPT DESIGN STAGE: CASE OF INDONESIA SINGLE ENDED RO-RO FERRIES
In recent years there have been many crossing vessels, especially those designed and built domestically. At the concept design stage, designers generally use the parent ship design method to determine the main dimension by taking one example of a reference ship with specifications close to the owner's requirements. However, this will be an obstacle if the existing ship specifications are unavailable, so designers must be able to perform initial calculations, especially predictions of the Lightweight (LWT). This paper introduces empirical formulas that utilize regression analysis to estimate LWT of Indonesia Single Ended Ro-Ro ferries. The formula of LWT based on Gross Tonnage (GT) requirements are presented.
- Open Access
- 11 January 2023
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Journal of Marine-Earth Science and Technology
- Vol. 3 (2) , 55-62
DESIGN OF AN EYE CLINIC SHIP WITH A HYBRID ELECTRIC ENERGY SOURCE FOR THE NUSA TENGGARA ISLANDS
The World Health Organization reports that cataracts are responsible for up to 77.7% of visually impaired individuals in Southeast Asia, with Indonesia having the largest population of such individuals. Cataracts can grow faster in areas exposed to much exposure to ultraviolet rays, such as the Nusa Tenggara Islands, which cover 3 provinces, namely Bali, West Nusa Tenggara (NTB), and East Nusa Tenggara (NTT). The availability of ophthalmologists in NTB and NTT is still lacking. One ophthalmologist serves 261,969 people in NTB and 871,510 people in NTT. This condition contrasts the target distribution of ophthalmologists according to the 2017-2030 Roadmap for Management of Visual Impairment in Indonesia. The development of the shipping industry has had a negative impact on world carbon dioxide (CO2) emissions. The use of a multi-energy hybrid system is believed to be able to effectively reduce energy consumption and emissions from ships. So, in this study, an innovation in the design of an Eye Clinic Vessel with a hybrid electric energy source was designed using the Spiral Design method. This paper aims to obtain operational patterns, payload, main dimensions, technical calculations, lines plan, general arrangements, safety plans, and 3D models. The ship will serve 14 areas with a ratio of ophthalmologists with a population of more than 1:250,000. Two ships will be built, which will be divided into 2 routes, namely the North Route and the South Route. Each area will be served for one week, so 1 round trip of the Eye Clinic Ship takes around 52 days. This ship has a payload in the form of a minimum deck area for clinical facilities of 228.2 m2 and can accommodate 25 patients with a length overall (Loa) of 38.27 m; Width (B) 10 m; Height (H) 3 m; Draft (T) 1.8 m; and Service Speed (Vs) 13 knots. The ship uses 86 units of solar panels with 120 batteries to store electrical energy. This solar panel can save fuel usage up to 54%.
- 11 January 2023
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Journal of Marine-Earth Science and Technology
- Vol. 3 (2) , 55-62
Open AccessDESIGN OF AN EYE CLINIC SHIP WITH A HYBRID ELECTRIC ENERGY SOURCE FOR THE NUSA TENGGARA ISLANDS
The World Health Organization reports that cataracts are responsible for up to 77.7% of visually impaired individuals in Southeast Asia, with Indonesia having the largest population of such individuals. Cataracts can grow faster in areas exposed to much exposure to ultraviolet rays, such as the Nusa Tenggara Islands, which cover 3 provinces, namely Bali, West Nusa Tenggara (NTB), and East Nusa Tenggara (NTT). The availability of ophthalmologists in NTB and NTT is still lacking. One ophthalmologist serves 261,969 people in NTB and 871,510 people in NTT. This condition contrasts the target distribution of ophthalmologists according to the 2017-2030 Roadmap for Management of Visual Impairment in Indonesia. The development of the shipping industry has had a negative impact on world carbon dioxide (CO2) emissions. The use of a multi-energy hybrid system is believed to be able to effectively reduce energy consumption and emissions from ships. So, in this study, an innovation in the design of an Eye Clinic Vessel with a hybrid electric energy source was designed using the Spiral Design method. This paper aims to obtain operational patterns, payload, main dimensions, technical calculations, lines plan, general arrangements, safety plans, and 3D models. The ship will serve 14 areas with a ratio of ophthalmologists with a population of more than 1:250,000. Two ships will be built, which will be divided into 2 routes, namely the North Route and the South Route. Each area will be served for one week, so 1 round trip of the Eye Clinic Ship takes around 52 days. This ship has a payload in the form of a minimum deck area for clinical facilities of 228.2 m2 and can accommodate 25 patients with a length overall (Loa) of 38.27 m; Width (B) 10 m; Height (H) 3 m; Draft (T) 1.8 m; and Service Speed (Vs) 13 knots. The ship uses 86 units of solar panels with 120 batteries to store electrical energy. This solar panel can save fuel usage up to 54%.
- Open Access
- 28 June 2019
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Jurnal Teknik ITS
- Vol. 8 (1) , G34-G39
Electric Waste Collecting Vessel (EWOV) – Citarum River
Electric Waste Collecting Vessel (EWOV) – Citarum River
- 28 June 2019
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in Jurnal Teknik ITS
- Vol. 8 (1) , G34-G39
Open AccessElectric Waste Collecting Vessel (EWOV) – Citarum River
Electric Waste Collecting Vessel (EWOV) – Citarum River