Hongcheng Yin
Hongcheng Yin has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
- Liangsheng Li
National Key Laboratory of Scattering and Radiation, Beijing 100854, China
4 shared publications - Yong-Qiang Liu
National Key Laboratory of Scattering and Radiation, Beijing, China
4 shared publications - Guizhen Lu
School of information and communication engineering, Communication University of China, Beijing, China
2 shared publications - Jinhai Sun
National Key Laboratory of Scattering and Radiation
2 shared publications - Ruiqi Zhao
Shandong Key Laboratory of Low-Altitude Airspace Surveillance Network Technology, QILU Aerospace Information Research Institute (AIR), Chinese Academy of Sciences (CAS), Jinan, China
2 shared publications - Zi He
School of Microelectronics (School of Integrated Circuits), Nanjing University of Science and Technology, Nanjing, China
2 shared publications
Latest Publications
- Open Access
- 22 November 2025
- Published by MDPI AG in Computation
- Vol. 13 (12) , 274
Dihedral Corner Region Camouflage in Radar Vision by Super-Dispersion Encoded Surfaces
Right-angle dihedral structures produce strong, highly correlated returns that dominate radar cross-section (RCS) and image signatures. Conventional absorbers or random coding metasurfaces often lose effectiveness across wide frequency bands and angles, and cannot adequately suppress the corner-induced hot spots. We propose a wideband super-dispersion encoded surface (SDES) conformally applied to dihedral facets. The approach co-designs input-admittance for absorption with a deterministic super-dispersion phase sequence to redistribute energy spectrally and angularly, thereby decorrelating the returns. We implement SDES on a thin composite panel and evaluate it on canonical dihedral and dihedral–cylindrical hybrid configurations. Unlike diffuse or random coding schemes, SDES enforces broadband, angle-stable dispersion with a deterministic sequence that specifically addresses corner singularity scattering. We also introduce perceptual-hashing as an imaging-domain metric to link RCS control with observable radar-image changes. From 12–18 GHz, SDES reduces the average monostatic RCS by 9.6 dB on a right-angle dihedral. In dihedral–cylindrical hybrids, SDES removes the corner hot spots and drives the radar-image similarity index down to 0.31, confirming substantial alteration of scattering signatures.
- 22 November 2025
- Published by MDPI AG in Computation
- Vol. 13 (12) , 274
Open AccessDihedral Corner Region Camouflage in Radar Vision by Super-Dispersion Encoded Surfaces
Right-angle dihedral structures produce strong, highly correlated returns that dominate radar cross-section (RCS) and image signatures. Conventional absorbers or random coding metasurfaces often lose effectiveness across wide frequency bands and angles, and cannot adequately suppress the corner-induced hot spots. We propose a wideband super-dispersion encoded surface (SDES) conformally applied to dihedral facets. The approach co-designs input-admittance for absorption with a deterministic super-dispersion phase sequence to redistribute energy spectrally and angularly, thereby decorrelating the returns. We implement SDES on a thin composite panel and evaluate it on canonical dihedral and dihedral–cylindrical hybrid configurations. Unlike diffuse or random coding schemes, SDES enforces broadband, angle-stable dispersion with a deterministic sequence that specifically addresses corner singularity scattering. We also introduce perceptual-hashing as an imaging-domain metric to link RCS control with observable radar-image changes. From 12–18 GHz, SDES reduces the average monostatic RCS by 9.6 dB on a right-angle dihedral. In dihedral–cylindrical hybrids, SDES removes the corner hot spots and drives the radar-image similarity index down to 0.31, confirming substantial alteration of scattering signatures.
- Open Access
- 1 September 2025
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (9) , 94907833
Bio-inspired flexible composite multilayer material: Cross-scale topological assembly for infrared-radar compatible detection suppression
The increasing demand for multi-spectral compatibility in complex electromagnetic environments has highlighted the critical challenge of reconciling infrared detection suppression with broadband microwave absorption. Inspired by the multilevel gradient structure of bamboo and the dynamic nanocrystal spacing modulation in chameleon skin, a flexible composite multilayer material is fabricated through a cross-scale topological assembly method. By constructing a functional coupling architecture comprising an infrared low-emissivity pattern layer, a broadband impedance matching layer, and a resistive frequency selective surface layer, effective energy suppression across both the infrared and radar spectra is achieved. The optimized structure demonstrates a reflection loss below −10 dB across a broad frequency range from 4.06 to 20.68 GHz, while maintaining an average infrared emissivity below 0.21 in the 8–14 μm wavelength range. Moreover, this structure exhibits high mechanical strength, a simple fabrication process, and stable performance, making it a promising candidate for next-generation multi-spectral detection applications.
- 1 September 2025
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (9) , 94907833
Open AccessBio-inspired flexible composite multilayer material: Cross-scale topological assembly for infrared-radar compatible detection suppression
The increasing demand for multi-spectral compatibility in complex electromagnetic environments has highlighted the critical challenge of reconciling infrared detection suppression with broadband microwave absorption. Inspired by the multilevel gradient structure of bamboo and the dynamic nanocrystal spacing modulation in chameleon skin, a flexible composite multilayer material is fabricated through a cross-scale topological assembly method. By constructing a functional coupling architecture comprising an infrared low-emissivity pattern layer, a broadband impedance matching layer, and a resistive frequency selective surface layer, effective energy suppression across both the infrared and radar spectra is achieved. The optimized structure demonstrates a reflection loss below −10 dB across a broad frequency range from 4.06 to 20.68 GHz, while maintaining an average infrared emissivity below 0.21 in the 8–14 μm wavelength range. Moreover, this structure exhibits high mechanical strength, a simple fabrication process, and stable performance, making it a promising candidate for next-generation multi-spectral detection applications.
- Open Access
- 5 April 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (7) , 1279
Flexible Metamaterial Quarter-Wave Plate and Its Application in Blocking the Backward Reflection of Terahertz Waves
A terahertz flexible metamaterial quarter-wave plate (QWP) is designed and fabricated using polyimide as the substrate in this paper, with a 3 dB axial ratio bandwidth of 0.51 THz and high polarization conversion efficiency and transmittance. The effect of the incidence angle on the polarization conversion performance of the QWP is discussed by measuring the transmissions at multiple incidence angles. The blocking effect of this QWP combined with a polarizer on the backward reflection of terahertz waves is investigated by terahertz time-domain spectral transmission experiments. By adjusting the angle of the QWP and polarizer with respect to the incident light in the optical path, a blocking efficiency of 20 dB can be achieved at a 20° incidence angle, with a bandwidth of 0.25 THz, a maximum blocking efficiency of 58 dB at 1.73 THz, and an insertion loss of only 1.4 dB. Flexible terahertz metamaterial QWPs and polarizers can effectively block harmful reflected waves in terahertz communication and other systems. They have the advantages of a simple structure, ultra-thinness and flexibility, easy integration, no external magnetic field, and no low-temperature and other environmental requirements, thus having broad application prospects for terahertz on-chip integrated systems.
- 5 April 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (7) , 1279
Open AccessFlexible Metamaterial Quarter-Wave Plate and Its Application in Blocking the Backward Reflection of Terahertz Waves
A terahertz flexible metamaterial quarter-wave plate (QWP) is designed and fabricated using polyimide as the substrate in this paper, with a 3 dB axial ratio bandwidth of 0.51 THz and high polarization conversion efficiency and transmittance. The effect of the incidence angle on the polarization conversion performance of the QWP is discussed by measuring the transmissions at multiple incidence angles. The blocking effect of this QWP combined with a polarizer on the backward reflection of terahertz waves is investigated by terahertz time-domain spectral transmission experiments. By adjusting the angle of the QWP and polarizer with respect to the incident light in the optical path, a blocking efficiency of 20 dB can be achieved at a 20° incidence angle, with a bandwidth of 0.25 THz, a maximum blocking efficiency of 58 dB at 1.73 THz, and an insertion loss of only 1.4 dB. Flexible terahertz metamaterial QWPs and polarizers can effectively block harmful reflected waves in terahertz communication and other systems. They have the advantages of a simple structure, ultra-thinness and flexibility, easy integration, no external magnetic field, and no low-temperature and other environmental requirements, thus having broad application prospects for terahertz on-chip integrated systems.
- 1 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Systems Engineering and Electronics
- Vol. 34 (2) , 342-349
Polarization characteristics and controllability mechanism of passive scattering elements
Polarization feature is one of the important features of radar targets, which has been used in many fields. In this paper, the grid models of some typical foreign moving targets are constructed on the simulation platform, such as glider, cruiser, fixed wing aircraft, and rotorcraft. The electromagnetic scattering characteristics of the moving platforms under the incidence of circular polarization waves are calculated. The typical polarization characteristics which the orthogonal and in-phase components have in the echoes are analyzed and proved. Based on the polarization scattering matrix (PSM) theory, from the point of view of the physical reproduction, the technical status quo that the existing technical approaches are difficult to realize the passive simulation of polarization characteristic of the target is summarized. To solve this problem, combined with the vector synthesis law, the realization mechanism of controllable polarization characteristic of target echoes is proposed, the analytical expressions of polarization control matrix and polarization ratio are deduced, and the controllability of polarization ratio feature in the case of circular polarization is verified by simulation calculation.
- 1 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Systems Engineering and Electronics
- Vol. 34 (2) , 342-349
Polarization characteristics and controllability mechanism of passive scattering elements
Polarization feature is one of the important features of radar targets, which has been used in many fields. In this paper, the grid models of some typical foreign moving targets are constructed on the simulation platform, such as glider, cruiser, fixed wing aircraft, and rotorcraft. The electromagnetic scattering characteristics of the moving platforms under the incidence of circular polarization waves are calculated. The typical polarization characteristics which the orthogonal and in-phase components have in the echoes are analyzed and proved. Based on the polarization scattering matrix (PSM) theory, from the point of view of the physical reproduction, the technical status quo that the existing technical approaches are difficult to realize the passive simulation of polarization characteristic of the target is summarized. To solve this problem, combined with the vector synthesis law, the realization mechanism of controllable polarization characteristic of target echoes is proposed, the analytical expressions of polarization control matrix and polarization ratio are deduced, and the controllability of polarization ratio feature in the case of circular polarization is verified by simulation calculation.
- Open Access
- 11 November 2022
- Published by MDPI AG in Electronics
- Vol. 11 (22) , 3696
Ultrawideband Precision RCS Regulation for Trihedral Corner Reflectors by Loading Resistive Film Absorbers
In this paper, an absorber with a resistive film is proposed, which holds stable polarization absorption characteristics at large angles by exploring the principle of absorption structure. The absorber contains three layers: the top layer is a metal patch with a resistive film, and the middle layer is covered with a metal patch. The thickness of the absorber structure is only 0.5 mm, and the absorber can be perfectly attached to the trihedral corner reflector (TCR) without affecting the characteristics of the reflector. By laying the absorber on the TCR, the TCR is stabilized at 8–40 GHz in the range of the incident angle ±20°, and the radar cross-section (RCS) reduction value of the TCR fluctuates around 1 dBsm. Thus, the RCS values of the three frequency points of 10 GHz, 15 GHz, and 35 GHz are consistent to achieve the accurate regulation of RCS. The stability of the absorber at different frequencies can be achieved, which is essential for the precise RCS regulation of complex scatterer structures. The effectiveness of the method was verified in experiments using a TCR metamaterial absorbing unit with resistive film.
- 11 November 2022
- Published by MDPI AG in Electronics
- Vol. 11 (22) , 3696
Open AccessUltrawideband Precision RCS Regulation for Trihedral Corner Reflectors by Loading Resistive Film Absorbers
In this paper, an absorber with a resistive film is proposed, which holds stable polarization absorption characteristics at large angles by exploring the principle of absorption structure. The absorber contains three layers: the top layer is a metal patch with a resistive film, and the middle layer is covered with a metal patch. The thickness of the absorber structure is only 0.5 mm, and the absorber can be perfectly attached to the trihedral corner reflector (TCR) without affecting the characteristics of the reflector. By laying the absorber on the TCR, the TCR is stabilized at 8–40 GHz in the range of the incident angle ±20°, and the radar cross-section (RCS) reduction value of the TCR fluctuates around 1 dBsm. Thus, the RCS values of the three frequency points of 10 GHz, 15 GHz, and 35 GHz are consistent to achieve the accurate regulation of RCS. The stability of the absorber at different frequencies can be achieved, which is essential for the precise RCS regulation of complex scatterer structures. The effectiveness of the method was verified in experiments using a TCR metamaterial absorbing unit with resistive film.
- 12 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (11) , 11223-11228
The Applications of the Symmetric Layered Medium Green’s Function in Magnetic Field Integral Equation
A symmetry relation of the integral operators in layered medium proved by the reciprocal theory can be applied to improve the accuracy of the magnetic-field integral equation (MFIE). Based on the symmetric layered medium Green’s function, the normal vector can be transferred into the inner integral so as to keep the field integral as the inner integral of the elements in the impedance matrix. When discretized by the divergence-conforming function, this field-extracted scheme shows better performance than the classic expression in accuracy. Meanwhile, this form of expression can be applied in the combined-field integral equation (CFIE). Several numerical results are provided to validate the formulation of the symmetry relations from the layered medium Green’s function to the impedance matrices and to reveal its advantages in enhancing the accuracy by the field-extracted form of MFIE.
- 12 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 70 (11) , 11223-11228
The Applications of the Symmetric Layered Medium Green’s Function in Magnetic Field Integral Equation
A symmetry relation of the integral operators in layered medium proved by the reciprocal theory can be applied to improve the accuracy of the magnetic-field integral equation (MFIE). Based on the symmetric layered medium Green’s function, the normal vector can be transferred into the inner integral so as to keep the field integral as the inner integral of the elements in the impedance matrix. When discretized by the divergence-conforming function, this field-extracted scheme shows better performance than the classic expression in accuracy. Meanwhile, this form of expression can be applied in the combined-field integral equation (CFIE). Several numerical results are provided to validate the formulation of the symmetry relations from the layered medium Green’s function to the impedance matrices and to reveal its advantages in enhancing the accuracy by the field-extracted form of MFIE.
- Open Access
- 25 May 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (11) , 1804
Dispersion Theory of Surface Plasmon Polaritons on Bilayer Graphene Metasurfaces
Surface plasmon polaritons (SPPs) on the graphene metasurfaces (GSPs) are crucial to develop a series of novel functional devices that can merge the well-established plasmonics and novel nanomaterials. Dispersion theory on GSPs is an important aspect, which can provide a basic understanding of propagating waves and further guidance for potential applications based on graphene metamaterials. In this paper, the dispersion theory and its modal characteristics of GSPs on double-layer graphene metasurfaces consisting of the same upper and lower graphene micro-ribbon arrays deposited on the dielectric medium are presented. In order to obtain its dispersion expressions of GSP mode on the structure, an analytical approach is provided by directly solving the Maxwell’s equations in each region and then applying periodical conductivity boundary onto the double interfaces. The obtained dispersion expressions show that GSPs split into two newly symmetric and antisymmetric modes compared to that on the single graphene metasurface. Further, the resultant dispersion relation and its propagating properties as a function of some important physical parameters, such as spacer, ribbon width, and substrate, are treated and investigated in the Terahertz band, signifying great potentials in constructing various novel graphene-based plasmonic devices, such as deeply sub-wavelength waveguides, lenses, sensors, emitters, etc.
- 25 May 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (11) , 1804
Open AccessDispersion Theory of Surface Plasmon Polaritons on Bilayer Graphene Metasurfaces
Surface plasmon polaritons (SPPs) on the graphene metasurfaces (GSPs) are crucial to develop a series of novel functional devices that can merge the well-established plasmonics and novel nanomaterials. Dispersion theory on GSPs is an important aspect, which can provide a basic understanding of propagating waves and further guidance for potential applications based on graphene metamaterials. In this paper, the dispersion theory and its modal characteristics of GSPs on double-layer graphene metasurfaces consisting of the same upper and lower graphene micro-ribbon arrays deposited on the dielectric medium are presented. In order to obtain its dispersion expressions of GSP mode on the structure, an analytical approach is provided by directly solving the Maxwell’s equations in each region and then applying periodical conductivity boundary onto the double interfaces. The obtained dispersion expressions show that GSPs split into two newly symmetric and antisymmetric modes compared to that on the single graphene metasurface. Further, the resultant dispersion relation and its propagating properties as a function of some important physical parameters, such as spacer, ribbon width, and substrate, are treated and investigated in the Terahertz band, signifying great potentials in constructing various novel graphene-based plasmonic devices, such as deeply sub-wavelength waveguides, lenses, sensors, emitters, etc.
- Open Access
- 20 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 50479-50486
Ultra-Broadband RCS Reduction Based on Optimized Coding “Whale-Shaped” Polarization Conversion Metasurface With Angular Stability
In this paper, we employed an efficient polarization conversion metasurface (PCM) to achieve broadband radar cross section (RCS) reduction for plane targets. Simulation results illustrate that the proposed "whale-shaped" unit achieves more than 90% polarization conversion ratio (PCR) in an ultra-broadband from 8.37 to 22.67 GHz. We combine the PCM unit into a 3×3 scale lattice to form periodic structure. Subsequently, the PCM lattice and its mirror lattice have been employed as "Lattice 0" and "Lattice 1" of digital coding. In order to achieve the best RCS reduction performance, the optimized combinational layout is accomplished by utilizing information entropy theory and genetic algorithm. Different from the traditional checkerboard distribution, the optimized coding PCM realizes scattering beam diffusion in space. The fitting of measurements and simulations demonstrate that the proposed PCM realizes monostatic RCS reduction of -10dB in the ultra-broadband from 9.37 to 22.79 GHz. Besides, the proposed optimized coding PCM maintains excellent RCS reduction performance over a wide-angle oblique incidence range from 0° to 45°. The proposed "whale-shaped" optimized coding PCM features both ultra-broadband operating bandwidth and high angular stability, which is informative for the practical application for PCMs.
- 20 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 50479-50486
Open AccessUltra-Broadband RCS Reduction Based on Optimized Coding “Whale-Shaped” Polarization Conversion Metasurface With Angular Stability
In this paper, we employed an efficient polarization conversion metasurface (PCM) to achieve broadband radar cross section (RCS) reduction for plane targets. Simulation results illustrate that the proposed "whale-shaped" unit achieves more than 90% polarization conversion ratio (PCR) in an ultra-broadband from 8.37 to 22.67 GHz. We combine the PCM unit into a 3×3 scale lattice to form periodic structure. Subsequently, the PCM lattice and its mirror lattice have been employed as "Lattice 0" and "Lattice 1" of digital coding. In order to achieve the best RCS reduction performance, the optimized combinational layout is accomplished by utilizing information entropy theory and genetic algorithm. Different from the traditional checkerboard distribution, the optimized coding PCM realizes scattering beam diffusion in space. The fitting of measurements and simulations demonstrate that the proposed PCM realizes monostatic RCS reduction of -10dB in the ultra-broadband from 9.37 to 22.79 GHz. Besides, the proposed optimized coding PCM maintains excellent RCS reduction performance over a wide-angle oblique incidence range from 0° to 45°. The proposed "whale-shaped" optimized coding PCM features both ultra-broadband operating bandwidth and high angular stability, which is informative for the practical application for PCMs.
- Open Access
- 5 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (2) , 1-9
Long-Range Spoof Surface Plasmons(LRSSP) on the Asymmetric Double Metal Gratings
Spoof surface plasmons(SSP) on the corrugated metal surfaces have been widely studied over the past decade in both microwave and Terahertz(THz) band. Previous studies show that SSP mode on the metal grating suffers from high dissipative losses especially near asymptotic frequency. The issue can be addressed by utilizing long-range SSP mode (LRSSP). In this paper, the asymmetric double metal gratings are proposed to support LRSSP which can significantly reduce the damping losses of the other short-range SSP mode (SRSSP) on the conventional doubly-corrugated metallic surfaces, thus enabling new possibilities to utilizing this SRSSP mode within long-range manner. According to our dispersion theory and the numerical calculations, the propagation loss of LRSSP is still lower than that of SRSSP within asymmetric regime, which demonstrates good tolerance to the asymmetry of the double-layer corrugated structure. However, its long-range propagation superiority of LRSSP vanishes gradually as the degree of asymmetry is enlarged. This work provides an alternative approach to increase the propagation length of SRSSP mode on the doubly-corrugated metallic surfaces and can open up new avenues to develop some novel LRSSP-based plasmonic devices such as waveguides, filters, sensors and active powerful radiation sources induced by energy beam below optical spectrum.
- 5 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (2) , 1-9
Open AccessLong-Range Spoof Surface Plasmons(LRSSP) on the Asymmetric Double Metal Gratings
Spoof surface plasmons(SSP) on the corrugated metal surfaces have been widely studied over the past decade in both microwave and Terahertz(THz) band. Previous studies show that SSP mode on the metal grating suffers from high dissipative losses especially near asymptotic frequency. The issue can be addressed by utilizing long-range SSP mode (LRSSP). In this paper, the asymmetric double metal gratings are proposed to support LRSSP which can significantly reduce the damping losses of the other short-range SSP mode (SRSSP) on the conventional doubly-corrugated metallic surfaces, thus enabling new possibilities to utilizing this SRSSP mode within long-range manner. According to our dispersion theory and the numerical calculations, the propagation loss of LRSSP is still lower than that of SRSSP within asymmetric regime, which demonstrates good tolerance to the asymmetry of the double-layer corrugated structure. However, its long-range propagation superiority of LRSSP vanishes gradually as the degree of asymmetry is enlarged. This work provides an alternative approach to increase the propagation length of SRSSP mode on the doubly-corrugated metallic surfaces and can open up new avenues to develop some novel LRSSP-based plasmonic devices such as waveguides, filters, sensors and active powerful radiation sources induced by energy beam below optical spectrum.
- 14 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 63 (6) , 75-86
Breaking the High-Frequency Limit and Bandwidth Expansion for Radar Cross-Section Reduction: A low-observable technology
This article investigates the bandwidth limit of radar cross-section (RCS) reduction (RCSR) and proposes a new strategy for realizing multiband and ultrawideband RCSR. The high-frequency bound is broken while guaranteeing the stability of the low frequency and is extended to the grating-lobe appearance region. The short circuit blind zone of RCSR was first discovered in structures, such as the metasurface, frequency-selective surface (FSS), artificial magnetic conductor (AMC), and electromagnetic (EM) bandgap (EBG), through analyzing the equivalent circuit model and the reflection phase of the unit cell.
- 14 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 63 (6) , 75-86
Breaking the High-Frequency Limit and Bandwidth Expansion for Radar Cross-Section Reduction: A low-observable technology
This article investigates the bandwidth limit of radar cross-section (RCS) reduction (RCSR) and proposes a new strategy for realizing multiband and ultrawideband RCSR. The high-frequency bound is broken while guaranteeing the stability of the low frequency and is extended to the grating-lobe appearance region. The short circuit blind zone of RCSR was first discovered in structures, such as the metasurface, frequency-selective surface (FSS), artificial magnetic conductor (AMC), and electromagnetic (EM) bandgap (EBG), through analyzing the equivalent circuit model and the reflection phase of the unit cell.