MDM. S. Dossekenov

M. S. Dossekenov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. S. Dossekenov has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The Effect of a Microwave Electromagnetic Field on the Structure and Properties of an Unsaturated Polyester Composite Filled with Carbon Nanotubes

    by A. S. Shcherbakov, A. Z. Bekeshev, A. S. Mostovoy, S. V. Arzamastsev, B. O. Sarsenbaev, M. S. Dosekenov

    The effect of a microwave electromagnetic field on the properties of a polyester composite filled with carbon nanotubes (CNTs) is studied. The amount of CNTs at which the best indices of physical and mechanical characteristics are achieved is determined. The processes of structure formation, the structure of the obtained composites, and their thermal stability are considered.

  • Open Access

    УТИЛИЗАЦИЯ МЕТАЛЛИЧЕСКОГО ПОРОШКА ВЫСОКОУГЛЕРОДИСТОГО ФЕРРОХРОМА МЕТОДОМ САМОРАСПРОСТРАНЯЮЩЕГОСЯ ВЫСОКОТЕМПЕРАТУРНОГО СИНТЕЗА (СВС)

    by Бекарыс Салкынбаев, Мурат Досекенов, Ильдар Манашев

    This article discusses the methods of recycling high-carbon ferrochrome metal powder by self-propagating high-temperature synthesis. The article is devoted to the study of aspiration metal dusts formed during the production of ferroalloys. The article analyzes the composition of the source material, its physicochemical properties, and the impact on the testing process. The publication touches upon the relevance of this topic and the advantages of the self-propagating high-temperature synthesis method. Particular attention was paid to comparative analyses of this method from other traditional material processing processes. This article will help to consider the problem of environmental pollution and the impact of traditional metallurgical processes on the ecosystem. The authors also analyze in detail the physical properties of the original powder samples and their combustion temperature mode. The publication shows the process flow charts, laboratory devices, and the type of resulting material. This article provides a detailed analysis of the types of laboratory devices, their physical and mechanical properties. The publication provides a thorough and detailed chemical analysis of the resulting material. In the course of the study, the expected results were obtained, which are presented in the form of tables and a figure. The article consists of an introduction, main part, conclusion, conclusion and list of references.


  • Open Access

    Exploring Alloy Composition Dynamics: Thermodynamic Analysis of Fe-Al-Si-Cr System in Homogeneous Liquid State

    by Yerbol Shabanov, Yerlan Zhumagaliyev, Nurzhan Nurgali, Murat Dossekenov, Karlyga Almuratova, Raigul Orynbassar, Tursyngul Kainenova, Botagoz Bakirova, Fatima Kanapiyeva, Elvira Zhunussova

    This study employs thermodynamic-diagram analysis to investigate component ratios within the Fe-Al-Si-Cr system, focusing on the behavior of homogeneous liquid states. Through comprehensive modeling, a phase diagram is constructed, elucidating the interplay of iron, aluminum, silicon, and chromium components. This study identifies stable elementary tetrahedra within the system, providing insights into phase compositions and distribution. Key findings reveal the significance of tetrahedral geometry in understanding and optimizing alloy compositions, particularly in the context of complex chromium alloys. This research underscores the utility of thermodynamic analysis in advancing our understanding of alloy systems and facilitating the optimization of production processes.

  • Open Access

    Pilot Tests of Pre-Reduction in Chromium Raw Materials from Donskoy Ore Mining and Processing Plant and Melting of High-Carbon Ferrochromium

    by Yerbol Shabanov, Yerbolat Makhambetov, Zhalgas Saulebek, Ruslan Toleukadyr, Sailaubai Baisanov, Nurzhan Nurgali, Azamat Shotanov, Murat Dossekenov, Yerlan Zhumagaliyev

    Experiments were conducted to pilot the initial reduction in chromium raw materials using the innovative Hoganas technology in a tunnel furnace. To simulate the process, a gas-fired bogie hearth furnace was employed. Technological containers made of silicon carbide crucibles were utilized. Sixteen different combinations of ore and coal mixtures were employed for the initial reduction process. Their total mass was more than 20 tons. Their heat treatment was performed at different temperatures and durations. During the pilot tests, the possibility of achieving chromium metallization was confirmed. Thus, it explains the application of a pre-reduction instead of the sintering or charge heating before the ferrochromium melting, i.e., the power consumption is minimized during the final remelting of the product in DC furnaces. The pilot melting of three batches of the pre-reduced chromium raw materials with various chromium metallization degrees has been tested in the ore-smelting furnace at Zh. Abishev Chemical–Metallurgical Institute (Karaganda). The capacity was 0.2 MVA. To evaluate the technical and economic efficiency of remelting pre-reduced chromium raw materials in commercial DC furnaces, a specific batch of primary ingredients for producing high-carbon ferrochromium, including chromite ore, coke, and quartz flux, was successfully melted in a segregated phase. As a result of the study, it was found that the specific energy consumption for melting high-carbon ferrochromium in the pilot furnace depends on the chromium metallization degree. The researchers tested a range of chromium metallization degrees from 0 to 65% and determined the corresponding specific energy consumption for each degree. Using the data obtained from the study, the researchers were able to assess the melting indexes of high-carbon ferrochromium in a larger 72 MW furnace. They found that by using a pre-reduced product with a chromium metallization degree of 65%, it was possible to reduce the specific energy consumption by half, to around 3.4 MW·h per ton of chromium. Overall, this study highlights the importance of considering the chromium metallization degree when determining the specific energy consumption for melting high-carbon ferrochromium. By optimizing the metallization degree, significant energy savings can be achieved, leading to more efficient and sustainable production processes.


  • Smelting of High-Carbon Ferrochrome from Prereduced Chromite Raw Materials of the Donskoy Ore Mining and Processing Plant

    by A. E. Shotanov, N. Z. Nurgali, A. V. Roshchin, V. P. Panfilov, S. O. Baysanov, M. S. Almagambetov, M. S. Dossekenov


  • Prereduction of Chromite Raw Materials by the Höganäs Method

    by A. E. Shotanov, A. V. Roshchin, V. P. Panfilov, N. Z. Nurgali, M. S. Dossekenov


  • Thermophysical properties of synthetic slags of the FeO – MnO – CaO – Al2O3 –– SiO2 system

    by D.A. Yessengaliyev, A.S. Baisanov, Abishev Chemical-Metallurgical Institutes, M.S. Dossekenov, LLP “Research and engineering center ERG”, B.S. Kelamanov, K. Zhubanov Aktobe regional university, D.M. Almabekov

    In the electrometallurgy of manganese alloys, viscosity has an important effect on the production indicators from the physicochemical properties of slag. During the smelting of manganese alloys, the main amount of heat spent on reduction reactions is released due to the current passing through the liquid slag phase, since the resistance of the latter, depending on the composition, affects the completeness of the reduction of manganese from melts. In the case of refined ferromanganese by the silicothermic method, the vast majority of silicon of silicomanganese is refined with higher manganese oxides or it is burned out due to oxygen in the air. The paper presents the results of thermophysical properties of slags representing the FeO - MnO - CaO - Al2O3 - SiO2 system. Laboratory experiments were carried out on synthetic slags by varying the slag basicity CaO / SiО2 = 1.5 - 1.9 and the concentration of Al2O3 = 5 - 15%. As a result, graphs of the dependence of these properties on temperature values are constructed, the activation energies of the viscous flow are calculated and the phase compositions of the experimental slags are determined using a mathematical model of the diagram of the FeO - MnO - CaO - Al2O3 - SiO2 system. Thus, an increase in the concentration of aluminum oxide against its usual level, changing the basicity of the slag, significantly affected the physicochemical properties of the slag and thereby contributes to the adjustment of the parameters of the electric melting process. At the same time, it is advisable to study the interaction of some Physical chemical properties of slags on the melting conditions of manganese ferroalloys in relation to the composition of slags.


  • Disposal of slag of refined ferrochromium by obtaining a sintered and carbonized construction products

    by K.Zhubanov Aktobe regional state university, O.R. Sariyev, Z.B. Musabekov, M.S. Dossekenov

    The article investigates the material composition of refined ferrochromium slag. It has been confirmed that the main compound in the slag is dicalcium silicate. The disposal problem of self-disintegration slag in the current production of refined ferrochromium can be solved by controlling its basic capacity with obtaining stabilized lump slag that is not influenced to silicate decomposition. This became the basis to researches the production of non-disintegrating burnt construction products from slags using low-melting silica-containing additives that reduce the slag basicity. Briquettes roasting containing from 20 to 30% additives in the temperature range of 1200-1225 °C showed the possibility of obtaining ceramic construction products. Material analysis of the slag also showed that the slag components, such as calcium oxide and magnesium oxide, are compounds prone to the formation of carbonates, which leads to the setting between the slag particles. Which makes it possible to obtain construction products in the process of autoclaving processing of bricks from the slag in the carbon dioxide environment. The influence of fineness, slag moisture, and the dwell time of products in an autoclave in the carbon dioxide environment on the strength of the resulting pellets were evaluated in this paper. It was determined that moderate humidity, in addition to increasing ductility during pellet molding, also increases the strength of products after carbonization. Excessive grinding of slag negatively affected on the quality of the pellets. The increase in compression force during the pellets formation, on the contrary, increased the strength of the products. An increase in the duration of carbonization at constant pressure had a positive effect on the strength increase of pellets.