Basheer Ashraf Ali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Basheer Ashraf Ali has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Subhramaniam Pushpavanam
Department of Chemical Engineering, Indian Institute of Technology Madras, Chennai, India
5 shared publications - Dominique Thévenin
Laboratory of Fluid Dynamics & Technical Flows, University of Magdeburg “Otto von Guericke”, 39106 Magdeburg, Germany
2 shared publications - Gábor Janiga
Laboratory of Fluid Dynamics and Technical Flows, Otto von Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany
2 shared publications - Venkata Sai Teja Madana
India Centre for Lab Grown Diamond (InCent‐LGD) Indian Institute of Technology Madras Chennai India
2 shared publications A. Seidel-Morgenstern
Max Planck Institute for Dynamics of Complex Technical Systems, 39106 Magdeburg, Germany
1 shared publicationAkella Sriniketh
Department of Chemical Engineering, National Institute of Technology Karnataka, Surathkal, Karnataka, India
1 shared publication
Latest Publications
- 1 November 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (11)
Experimental and computational investigation of solid suspension and gas dispersion in a stirred vessel
Hydrodynamics and residence time distribution of fluid elements are key parameters to characterize the performance of stirred vessel. They are governed by geometric and operating parameters of the stirred vessel. In the present work, performance of the stirred vessel is studied using computational fluid dynamics (CFD). The flow field and associated solid suspension characteristics are predicted using the Euler-Granular approach. The draft tube baffle configuration with three inner baffles and six outer baffles is introduced to enhance the performance of the stirred vessel. The chaotic mixing among fluid elements is obtained by tracking particles in the flow domain through the Lagrangian way by solving Newton's 2nd law. This is qualitatively analyzed using Poincaré map and quantitatively evaluated using Shannon entropy to characterize the extent of chaotic mixing in stirred vessel. The performance of stirred vessel is further investigated through stimulus-response tracer techniques (Residence time distribution, RTD) to detect design flaws such as by-pass and dead zones of a stirred vessel. This is analyzed for a wide range of operating parameters. The RTD data is evaluated using two-parameter model to quantify non-idealities and to find an optimum outlet location in a stirred vessel. Further, gas is dispersed into the flow domain to reduce the extent of the non-ideal parameters, accordingly an optimum gas injection point is identified that supports the design of stirred vessel.
- 1 November 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (11)
Experimental and computational investigation of solid suspension and gas dispersion in a stirred vessel
Hydrodynamics and residence time distribution of fluid elements are key parameters to characterize the performance of stirred vessel. They are governed by geometric and operating parameters of the stirred vessel. In the present work, performance of the stirred vessel is studied using computational fluid dynamics (CFD). The flow field and associated solid suspension characteristics are predicted using the Euler-Granular approach. The draft tube baffle configuration with three inner baffles and six outer baffles is introduced to enhance the performance of the stirred vessel. The chaotic mixing among fluid elements is obtained by tracking particles in the flow domain through the Lagrangian way by solving Newton's 2nd law. This is qualitatively analyzed using Poincaré map and quantitatively evaluated using Shannon entropy to characterize the extent of chaotic mixing in stirred vessel. The performance of stirred vessel is further investigated through stimulus-response tracer techniques (Residence time distribution, RTD) to detect design flaws such as by-pass and dead zones of a stirred vessel. This is analyzed for a wide range of operating parameters. The RTD data is evaluated using two-parameter model to quantify non-idealities and to find an optimum outlet location in a stirred vessel. Further, gas is dispersed into the flow domain to reduce the extent of the non-ideal parameters, accordingly an optimum gas injection point is identified that supports the design of stirred vessel.
- 17 May 2022
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 210 (8) , 1266-1278
Computational investigation of hydrodynamics, flow regimes and bubble size distribution in an airlift reactor
Airlift reactors (ALRs) are widely used in the chemical, petrochemical biological industry. A fundamental understanding of the flow field in these airlift reactors are necessary for efficient design and scaling up. In this work, the behavior of the flow field is investigated using the Euler–Eulerian approach. The liquid phase is modeled as continuous and the gas phase is dispersed in the form of bubbles. Three dimensional (3 D) transient computational fluid dynamics (CFD) simulations are performed to characterize flow behavior in ALR. The spatio-temporal variations in the flow field are quantified and an optimum liquid level in the ALR is determined. Various gas source locations are chosen and their effects on bubble plume motion are analyzed to find an optimum gas injection point that supports plume oscillation. Further, CFD simulations are performed to identify the prevailing flow regime in ALR for various gas source locations, and it is compared with experimental observations. The homogeneous and heterogeneous flow regimes are observed at lower and higher flow rates, respectively. The bubble size distribution is predicted using population balance equations through bubble coalescence and breakage models with interphase force formulations. This is computed through the discrete method of moments. The bubble size distribution is found to be narrow at lower gas flow rates and wider at higher gas flow rates. These predictions provide a unified description to characterize flow regimes in ALR.
- 17 May 2022
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 210 (8) , 1266-1278
Computational investigation of hydrodynamics, flow regimes and bubble size distribution in an airlift reactor
Airlift reactors (ALRs) are widely used in the chemical, petrochemical biological industry. A fundamental understanding of the flow field in these airlift reactors are necessary for efficient design and scaling up. In this work, the behavior of the flow field is investigated using the Euler–Eulerian approach. The liquid phase is modeled as continuous and the gas phase is dispersed in the form of bubbles. Three dimensional (3 D) transient computational fluid dynamics (CFD) simulations are performed to characterize flow behavior in ALR. The spatio-temporal variations in the flow field are quantified and an optimum liquid level in the ALR is determined. Various gas source locations are chosen and their effects on bubble plume motion are analyzed to find an optimum gas injection point that supports plume oscillation. Further, CFD simulations are performed to identify the prevailing flow regime in ALR for various gas source locations, and it is compared with experimental observations. The homogeneous and heterogeneous flow regimes are observed at lower and higher flow rates, respectively. The bubble size distribution is predicted using population balance equations through bubble coalescence and breakage models with interphase force formulations. This is computed through the discrete method of moments. The bubble size distribution is found to be narrow at lower gas flow rates and wider at higher gas flow rates. These predictions provide a unified description to characterize flow regimes in ALR.
- 20 September 2021
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 209 (10) , 1413-1422
Effect of baffle configuration on hydrodynamics and solid suspension in a continuous stirred vessel
Hydrodynamics of stirred vessel is difficult to predict due to complex flow conditions existing inside the reactor. Hence in this present work, hydrodynamics and solid suspension in a continuous stirred vessel are numerically investigated using Computational Fluid Dynamics (CFD). To predict the flow field, transient 3 D CFD simulations are performed using Multiple Reference Frame along with Sliding Mesh approach and realizable k-ε turbulence model. The flow field is quantified by spatial/temporal variation of liquid velocity magnitude and liquid circulation. To improve the performance of the stirred vessel, draft tube baffle configurations are proposed and these predictions are compared with the unbaffled system. Further, the suspension characteristics of solids are predicted using the Euler-Granular model and quantified by calculating cloud height in stirred vessel system. The solid concentration is found to be uniform in the baffled stirred vessel and it is concentrated at the bottom of the vessel in the unbaffled stirred vessel. Thus, the proposed draft tube configuration supports in achieving the uniform distribution of solids and overcomes sedimentation of solids in stirred vessel system.
- 20 September 2021
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 209 (10) , 1413-1422
Effect of baffle configuration on hydrodynamics and solid suspension in a continuous stirred vessel
Hydrodynamics of stirred vessel is difficult to predict due to complex flow conditions existing inside the reactor. Hence in this present work, hydrodynamics and solid suspension in a continuous stirred vessel are numerically investigated using Computational Fluid Dynamics (CFD). To predict the flow field, transient 3 D CFD simulations are performed using Multiple Reference Frame along with Sliding Mesh approach and realizable k-ε turbulence model. The flow field is quantified by spatial/temporal variation of liquid velocity magnitude and liquid circulation. To improve the performance of the stirred vessel, draft tube baffle configurations are proposed and these predictions are compared with the unbaffled system. Further, the suspension characteristics of solids are predicted using the Euler-Granular model and quantified by calculating cloud height in stirred vessel system. The solid concentration is found to be uniform in the baffled stirred vessel and it is concentrated at the bottom of the vessel in the unbaffled stirred vessel. Thus, the proposed draft tube configuration supports in achieving the uniform distribution of solids and overcomes sedimentation of solids in stirred vessel system.
- 5 January 2021
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 208 (6) , 903-913
Computational investigation of flow field, mixing and reaction in a T-shaped microchannel
Microfluidics plays an essential role in process intensification, carrying out reactions safely and enhancing mass and heat transfer coefficients. In this work, hydrodynamics, mixing and reaction in the microchannel are investigated numerically and experimentally. To predict the flow field, three dimensional transient CFD simulations are performed. The irreversibility induced by the flow is used to quantify the liquid circulation. To improve the flow field, the geometry of the microchannel is modified by placing obstacles. It is found that geometric modifications have a significant effect on the hydrodynamics and hence mixing and reaction. The axial and lateral mixing are analyzed for various obstacles using Residence Time Distribution (RTD). The mixing index is calculated to characterize lateral mixing and to find an optimum configuration that supports flow field and mixing. Further, the implications of these obstacles on a fast neutralization reaction in the microchannel are studied.
- 5 January 2021
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 208 (6) , 903-913
Computational investigation of flow field, mixing and reaction in a T-shaped microchannel
Microfluidics plays an essential role in process intensification, carrying out reactions safely and enhancing mass and heat transfer coefficients. In this work, hydrodynamics, mixing and reaction in the microchannel are investigated numerically and experimentally. To predict the flow field, three dimensional transient CFD simulations are performed. The irreversibility induced by the flow is used to quantify the liquid circulation. To improve the flow field, the geometry of the microchannel is modified by placing obstacles. It is found that geometric modifications have a significant effect on the hydrodynamics and hence mixing and reaction. The axial and lateral mixing are analyzed for various obstacles using Residence Time Distribution (RTD). The mixing index is calculated to characterize lateral mixing and to find an optimum configuration that supports flow field and mixing. Further, the implications of these obstacles on a fast neutralization reaction in the microchannel are studied.
- 1 July 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (7) , 072005
Numerical investigation of engulfment flow at low Reynolds numbers in a T-shaped microchannel
Microreactors play a major role in the intensification of industrial processes. The performance of microfluidic devices depends on the flow behavior and flow regimes present in such systems. In this work, single-phase flow behavior and associated flow regimes in a T-shaped microchannel are numerically analyzed using computational fluid dynamics (CFD). To predict the single-phase flow regimes, three dimensional transient CFD simulations are performed. The critical Reynolds number (Re) at which flow regime transition and onset of engulfment occur is identified (Recritical = 300). To achieve engulfment flow at lower Re, the inlet geometry of the microchannel is modified as a convergent (C)–divergent (D) section and its effect on engulfment flow is analyzed. When the C/D ratio is 9:1, the predicted pressure drop (Δp) is found to be minimum (Recritical = 75, Δp = 5.4 kPa). The understanding of the engulfment flow regime is exploited through residence time distribution (RTD). The predicted RTD profiles indicate strong recirculation among vortices. The mixing index is calculated to quantify RTD, and it is found to be minimum when the C/D ratio is 9:1. The mixing performance is further verified by introducing buoyant particles in Lagrangian manner using discrete phase modeling. The predicted dynamics are qualitatively and quantitatively analyzed through Poincaré maps and Shannon’s entropy for various convergent–divergent inlets to characterize mixing. Once again, the C/D ratio of 9:1 supports in enhancing mixing in the microchannel. Hence, the proposed micromixer based on geometric modifications at the inlet helps achieve the engulfment flow regime at low Re.
- 1 July 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (7) , 072005
Numerical investigation of engulfment flow at low Reynolds numbers in a T-shaped microchannel
Microreactors play a major role in the intensification of industrial processes. The performance of microfluidic devices depends on the flow behavior and flow regimes present in such systems. In this work, single-phase flow behavior and associated flow regimes in a T-shaped microchannel are numerically analyzed using computational fluid dynamics (CFD). To predict the single-phase flow regimes, three dimensional transient CFD simulations are performed. The critical Reynolds number (Re) at which flow regime transition and onset of engulfment occur is identified (Recritical = 300). To achieve engulfment flow at lower Re, the inlet geometry of the microchannel is modified as a convergent (C)–divergent (D) section and its effect on engulfment flow is analyzed. When the C/D ratio is 9:1, the predicted pressure drop (Δp) is found to be minimum (Recritical = 75, Δp = 5.4 kPa). The understanding of the engulfment flow regime is exploited through residence time distribution (RTD). The predicted RTD profiles indicate strong recirculation among vortices. The mixing index is calculated to quantify RTD, and it is found to be minimum when the C/D ratio is 9:1. The mixing performance is further verified by introducing buoyant particles in Lagrangian manner using discrete phase modeling. The predicted dynamics are qualitatively and quantitatively analyzed through Poincaré maps and Shannon’s entropy for various convergent–divergent inlets to characterize mixing. Once again, the C/D ratio of 9:1 supports in enhancing mixing in the microchannel. Hence, the proposed micromixer based on geometric modifications at the inlet helps achieve the engulfment flow regime at low Re.
- 22 November 2019
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 208 (6) , 883-892
Computational modeling of hydrodynamics and mixing in a batch stirred vessel
In this work, the hydrodynamics, mixing and sedimentation is numerically investigated in the batch stirred vessel through CFD. The flow field obtained by performing transient CFD simulations using multiple reference frame (MRF) and sliding mesh approach along with standard k-ε turbulence model. The velocity field is investigated spatially and temporally and liquid circulation is quantified at various impeller speeds to find an optimum impeller speed. The importance of geometry of the draft tube baffles is investigated by quantifying the vorticity, mixing time, power requirement and quality of suspension in the batch stirred vessel. It is found that suspension quantity in a batch stirred vessel is strongly dependent on the hydrodynamics. The role of the draft tube and the inner baffles is further analyzed and found that proper positioning and length of the baffles is necessary to improve the turbulence characteristics and the quality of the suspension.
- 22 November 2019
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 208 (6) , 883-892
Computational modeling of hydrodynamics and mixing in a batch stirred vessel
In this work, the hydrodynamics, mixing and sedimentation is numerically investigated in the batch stirred vessel through CFD. The flow field obtained by performing transient CFD simulations using multiple reference frame (MRF) and sliding mesh approach along with standard k-ε turbulence model. The velocity field is investigated spatially and temporally and liquid circulation is quantified at various impeller speeds to find an optimum impeller speed. The importance of geometry of the draft tube baffles is investigated by quantifying the vorticity, mixing time, power requirement and quality of suspension in the batch stirred vessel. It is found that suspension quantity in a batch stirred vessel is strongly dependent on the hydrodynamics. The role of the draft tube and the inner baffles is further analyzed and found that proper positioning and length of the baffles is necessary to improve the turbulence characteristics and the quality of the suspension.
- 20 October 2019
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 208 (6) , 843-850
Computational investigation of hydrodynamics and solid circulation in fluidized bed column
Gas–solid fluidized beds are commonly used in applications where high heat and mass transfer is required, which are influenced by the quality of mixing in the bed. This largely depends on the design of gas distributor and operating conditions. Hence, in the current work, the influence of distributor design on hydrodynamics in a 3D bubbling fluidized bed column is investigated using CFD. Here, Euler-Euler model is used to predict the flow field. The predicted bed pressure drop is analyzed for various superficial gas velocities, and it has been validated with the experimental data. The solid circulation rate is calculated to quantify the flow field, and it is improved by incorporating various gas distributors such as flat, convex and concave perforated plates. The magnitude of solid circulation rate is found to be the highest for convex plate, showing that it is more advantageous than the conventional flat plate configuration. Further, the effect of operating temperature and the influence of baffle on gas–solid flow are analyzed. The rate of solid circulation is found to decrease with increase in temperature and in the presence of baffle.
- 20 October 2019
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 208 (6) , 843-850
Computational investigation of hydrodynamics and solid circulation in fluidized bed column
Gas–solid fluidized beds are commonly used in applications where high heat and mass transfer is required, which are influenced by the quality of mixing in the bed. This largely depends on the design of gas distributor and operating conditions. Hence, in the current work, the influence of distributor design on hydrodynamics in a 3D bubbling fluidized bed column is investigated using CFD. Here, Euler-Euler model is used to predict the flow field. The predicted bed pressure drop is analyzed for various superficial gas velocities, and it has been validated with the experimental data. The solid circulation rate is calculated to quantify the flow field, and it is improved by incorporating various gas distributors such as flat, convex and concave perforated plates. The magnitude of solid circulation rate is found to be the highest for convex plate, showing that it is more advantageous than the conventional flat plate configuration. Further, the effect of operating temperature and the influence of baffle on gas–solid flow are analyzed. The rate of solid circulation is found to decrease with increase in temperature and in the presence of baffle.
- 12 December 2014
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 15 (1) , 145-155
Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer
- 12 December 2014
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 15 (1) , 145-155
Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer
- 1 June 2013
- Published by Elsevier in Journal of Crystal Growth
- Vol. 372, 219-229
Numerical analysis of hydrodynamics and crystal motion in a batch crystallizer
- 1 June 2013
- Published by Elsevier in Journal of Crystal Growth
- Vol. 372, 219-229
Numerical analysis of hydrodynamics and crystal motion in a batch crystallizer
- 1 April 2012
- Published by Elsevier in Chemical Engineering Journal
- Vol. 187, 261-274
Hydrodynamics, mixing and selectivity in a partitioned bubble column
- 1 April 2012
- Published by Elsevier in Chemical Engineering Journal
- Vol. 187, 261-274
Hydrodynamics, mixing and selectivity in a partitioned bubble column