ADAbhijit Das

Abhijit Das

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abhijit Das has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Large-Area Flexible SERS Sensor Chips Fabricated Using a Combination of Nanosphere Self-Assembly and Glancing Angle Deposition for Chemical and Biological Sensing

    by Merbin John, Umang Chaturvedi, Kamal Kumar, Abhijit Das, Vaibhav Chaturvedi, Mohd Asif, Anuj Dhawan

    In this work, we combine two highly efficient nanofabrication methods, nanosphere lithography (NSL) and glancing angle deposition (GLAD), to fabricate large-area and low-cost surface-enhanced Raman scattering (SERS) substrates consisting of highly ordered arrays of pointed plasmonic nanowires, such that the size of the plasmonic nanowires as well as the gaps between the nanowires can be precisely controlled. These SERS substrates are cut into small SERS sensor chips for highly sensitive, selective detection of analyte molecules of interest, including pesticides thiabendazole, paraoxon-ethyl, and phosmet and nucleotides adenine and thymine. Moreover, this paper reports the fabrication of SERS substrates on flexible polymeric films using a combination of NSL and GLAD, which has not been reported earlier. This process involves atomic layer deposition coating of silicon dioxide on polymeric substrates to enable self-assembly of nanospheres on these substrates, followed by GLAD on these self-assembled nanospheres. We demonstrated the detection of the pesticide Phosmet and the biomarker dipicolinic acid using flexible NSL-GLAD chips.


  • Fabric SERS-sensor chips based on Ag nanowires grown on large-area woven textiles

    by Abhijit Das, Merbin John, Kamal Kumar, Nitin Gupta, Ajay Kumar Agrawal, Umang Chaturvedi, Anuj Dhawan

    Surface-enhanced Raman scattering (SERS) enables specific detection of chemical and biological analytes by detecting Raman signals from the molecular bonds in the analytes. Conventionally, rigid substrates have been explored due to their compatibility with semiconductor fabrication technology. Flexible and conformal SERS substrates have a broader scope for real-life applications due to their conformity over any complex surface for effectively sensing target molecules. We employ glancing angle deposition (GLAD) to directly grow silver nanowires (AgNWs) on a textile fabric to obtain flexible and conformal SERS substrates. Glancing angle deposition of AgNWs directly on textile fabrics is an easy, large-area fabrication method for developing SERS substrates, wherein not just batch processes but roll-to-roll fabrication processes are also possible. The low-cost textile fabric-based SERS substrates exhibit significantly higher SERS signals than those developed using GLAD on planar rigid silicon substrates or flexible Kapton substrates. This growth of plasmonic nanowires directly on the threads of a textile fabric has not been reported in any previous research work. Moreover, glancing angle deposition of plasmonic nanowires directly on a textile fabric has not been employed previously to develop large-area conformal SERS substrates. The SERS substrates developed on a large area can be cut into hundreds of small SERS sensor chips, which can be employed for detecting chemical or biological molecules of interest. The SERS analytical enhancement factor (AEF) of the textile fabric-based SERS sensor chips was experimentally evaluated to be 4×10 9 using pMBA. These SERS sensor chips were also employed for the label-free detection of DNA nucleobase cytosine (C).


  • Open Access

    Nanoscale photonic artificial neuron with biological signal processing

    by Joachim E. Sestoft, Thomas K. Jensen, Vidar Flodgren, Abhijit Das, Rasmus D. Schlosser, David Alcer, Mariia Lamers, Thomas Kanne, Magnus T. Borgström, Jesper Nygård, et al.

    Neuromorphic hardware can mitigate the unsustainable energy demand of artificial intelligence infrastructure. Photonic approaches provide high speed, low energy, and high connectivity but existing solutions have large circuit footprints which limits scaling potential and they miss key biological functions, like inhibition. We report a nano-optoelectronic artificial neuron with at least 100-fold reduced circuit footprints compared to existing approaches and picowatt-level operating power. The device deterministically integrates excitatory and inhibitory inputs, performs a nonlinear transfer operation, and exhibits biologically relevant temporal dynamics. Neural weighting is implemented via tunable input gains, enabling controlled summation and thresholding. The architecture is compatible with commercial silicon technology, supports multi-wavelength operation, and can be used for both computing and optical sensing. This work paves the way for two important research paths: photonic neuromorphic computing with nanosized footprints and low power consumption, and adaptive optical sensing, using the same architecture as a compact, modular front end.


  • Low-Cost, Large-Area Fabricated, Highly Sensitive, and Specific Plasmonic Hydrogen Gas Sensors Embedded in Large-Area Conductive Textiles and Wearable Jackets

    by Merbin John, Kamal Kumar, Ajay Kumar Agrawal, Umang Chaturvedi, Abhijit Das, Vaibhav Chaturvedi, Anuj Dhawan

    In this paper, we describe highly sensitive plasmonic hydrogen sensors that are based on plasmonic nanohole arrays in gold films coated with a thin layer of palladium. These plasmonic hydrogen sensors operate at room temperature, which is very important for hydrogen sensing, as sensing at higher temperatures can lead to possible fires or explosions, as hydrogen is a highly flammable and potentially explosive gas above a certain concentration. We describe low-cost compact hydrogen sensors that are fabricated over a large area using nanosphere lithography. These compact hydrogen sensor chips are integrated into miniaturized capsules along with small LEDs and photodetectors such that these capsules can easily be attached to flexible conductive wires and threads or can be attached to an electronic textile fabric. The plasmonic hydrogen sensors being proposed in this paper are not only highly specific to hydrogen but also have a low limit of detection in the low ppm range. We also demonstrate a textile fabric based plasmonic gas sensing system, having multiple plasmonic hydrogen sensors attached to conductive threads embroidered on an electronic textile fabric, which has not been carried out previously. In this article, we also demonstrate a wearable textile jacket with multiple embedded plasmonic hydrogen sensors. Moreover, we demonstrate a wearable jacket with embedded plasmonic gas sensors such that light sources (LEDs) of different wavelengths are employed for sensing, providing multiwavelength sensing results. Sensing in different spectral regimes can also allow verification of the sensing results with those obtained by using a spectrometer, possibly alleviating the need for employing a spectrometer for carrying out the gas sensing work.


  • Organic solar cells having plasmonic nanostructures in different solar cell regions for enhancement of photovoltaic characteristics

    by Pankaj Kumar Das, Kamal Kumar, Abhijit Das, Anuj Dhawan

    This paper presents the improved photovoltaic characteristics of organic solar cells (OSCs) consisting of low band gap (LBG) active medium and a combination of plasmonic nanostructures embedded in the cathode buffer layer (CBL) and on the upper surface of the bottom silver (Ag) layer of the OSCs. A combination of a 2-dimensional (2D) array of plasmonic nanostructures such as Ag nano-discs (Ag-NDs) present in the CBL of the OSC with a 2D array of either Ag nano-rings (Ag-NRs), Ag nano-discs (Ag-NDs), or Ag nano-hemispheres (Ag-HSs) above the bottom Ag layer of the OSCs, was employed for achieving enhanced performance of the OSCs. Finite-difference time-domain (FDTD) simulations were used to analyze the photon absorption (A(λ)), short circuit current density (JSC), and power conversion efficiency (PCE) of OSCs containing the plasmonic nanostructures. The results of our FDTD simulations demonstrate that these bulk heterojunction OSCs containing Ag-NDs arrays in the CBL primarily increase the A(λ) in the 650–900 nm spectral regime. On the other hand, our FDTD simulations also demonstrate that 2D arrays of Ag-NDs in the CBL in a combination with 2D arrays of either Ag-NRs, Ag-NDs, or Ag-HSs at bottom of the cells increase the light trapping in the visible and the NIR spectral region, thereby significantly increasing the JSC and PCE of the proposed OSCs. It is observed that while the inclusion of structures consisting of Ag-NDs array in the CBL in a combination with Ag-HSs array at bottom of the cells lead to enhancements in JSC and PCE of 40.36% and 40.36%, respectively, compared to a planar OSC, these enhancement values are only 32.22% and 32.1%, respectively, when only Ag-NDs are present only in the CBL. Hence, a combined structure of Ag-NDs array in the CBL and Ag nanoparticle array at the bottom of the OSC leads to an enhanced JSC and PCE compared to those in a planar OSC or to those when only the NDs are embedded only in the CBL.


  • Open Access

    Neuromorphic Readout for Hadron Calorimeters

    by Enrico Lupi, Abhishek, Max Aehle, Muhammad Awais, Alessandro Breccia, Riccardo Carroccio, Long Chen, Abhijit Das, Andrea De Vita, Tommaso Dorigo, et al.

    We simulate hadrons impinging on a homogeneous lead tungstate (PbWO4) calorimeter using GEANT4 software to investigate how the resulting light yield and its temporal structure, as detected by an array of light-sensitive sensors, can be processed by a neuromorphic computing system. Our model encodes temporal photon distributions as spike trains and employs a fully connected spiking neural network to estimate the total deposited energy, as well as the position and spatial distribution of the light emissions within the sensitive material. The extracted primitives offer valuable topological information about the shower development in the material, achieved without requiring a segmentation of the active medium. A potential nanophotonic implementation using III-V semiconductor nanowires is discussed. It can be both fast and energy efficient.


  • Open Access

    Neuromorphic Readout for Hadron Calorimeters

    by Enrico Lupi, Abhishek, Max Aehle, Muhammad Awais, Alessandro Breccia, Riccardo Carroccio, Long Chen, Abhijit Das, Andrea De Vita, Tommaso Dorigo, et al.

    We simulate hadrons impinging on a homogeneous lead-tungstate (PbWO4) calorimeter to investigate how the resulting light yield and its temporal structure, as detected by an array of light-sensitive sensors, can be processed by a neuromorphic computing system. Our model encodes temporal photon distributions as spike trains and employs a fully connected spiking neural network to estimate the total deposited energy, as well as the position and spatial distribution of the light emissions within the sensitive material. The extracted primitives offer valuable topological information about the shower development in the material, achieved without requiring a segmentation of the active medium. A potential nanophotonic implementation using III-V semiconductor nanowires is discussed. It can be both fast and energy efficient.

  • Open Access

    Direct on-Chip Optical Communication between Nano Optoelectronic Devices

    by Vidar Flodgren, Abhijit Das, Joachim E. Sestoft, David Alcer, Thomas K. Jensen, Hossein Jeddi, Håkan Pettersson, Jesper Nygård, Magnus T. Borgström, Heiner Linke, et al.

    On-chip optical communication between individual nano optoelectronic components is important to reduce the footprint and improve energy efficiency of photonic neuromorphic solutions. Although nanoscale photon emitters and receivers have been reported separately, communication between them remains largely unexplored. We demonstrate direct on-chip directional broadcasting of light between individual InP nanowire photodiodes on silicon. The performance of multiple wire-to-wire communication circuits is mapped, demonstrating robust performance with up to 5 bit resolution as needed in biological networks and a minimum component driving power for continuous operation of 0.5 μW which is below that of conventional hardware. The results agree well with theoretical modeling that allows us to understand network performance limits and identify where significant improvements could be achieved. We estimate that an energy per operation of ∼1 fJ and signal fan-out from one emitter to hundreds of other nodes is possible. We find that the nanowire circuit performance parameters can satisfy the quantitative requirements to run the tasks of neural nodes in a bioderived neural network for autonomous navigation.


  • Open Access

    Integrating molecular photoswitch memory with nanoscale optoelectronics for neuromorphic computing

    by David Alcer, Nelia Zaiats, Thomas K. Jensen, Abbey M. Philip, Evripidis Gkanias, Nils Ceberg, Abhijit Das, Vidar Flodgren, Stanley Heinze, Magnus T. Borgström, et al.

    Photonic solutions are potentially highly competitive for energy-efficient neuromorphic computing. However, a combination of specialized nanostructures is needed to implement all neuro-biological functionality. Here, we show that donor-acceptor Stenhouse adduct dyes integrated with III-V semiconductor nano-optoelectronics have combined excellent functionality for bio-inspired neural networks. The dye acts as synaptic weights in the optical interconnects, while the nano-optoelectronics provide neuron reception, interpretation and emission of light signals. These dyes can reversibly switch from absorbing to non-absorbing states, using specific wavelength ranges. Together, they show robust and predictable switching, low energy thermal reset and a memory dynamic range from days to sub-seconds that allows both short- and long-term memory operation at natural timescales. Furthermore, as the dyes do not need electrical connections, on-chip integration is simple. We illustrate the functionality using individual nanowire photodiodes as well as arrays. Based on the experimental performance metrics, our on-chip solution is capable of operating an anatomically validated model of the insect brain navigation complex.


  • Highly Sensitive LSPR Sensor Chips Based on Crystalline Gold Nanoparticles Grown on Silica

    by Abhijit Das, Ajay Kumar Agrawal, Nitin Gupta, Anuj Dhawan

    In this paper, we demonstrate the fabrication of LSPR sensor chips consisting of crystalline gold nanoparticles (AuNPs) over a large area. These crystalline AuNPs were grown on a heated silica substrate via thermal evaporation in a simple single-step fabrication process. To the best of our knowledge, the fabrication of LSPR sensor chips via the growth of crystalline AuNPs has not been demonstrated earlier. We present a process of AuNP growth wherein nanoparticles have been successfully formed for deposition thicknesses up to 40 nm at comparatively lower temperatures than what has been demonstrated earlier. The crystalline AuNPs are formed during the evaporation process, without the requirement of any additional annealing time. The growth of crystalline AuNPs, as proposed in this paper, enables the formation of AuNPs for larger values of equivalent QCM film thicknesses, going up to 40 nm, and possibly even higher. The AuNPs from different values of film thicknesses also allow the tuning of LSPR peak wavelength over a wider range of the visible spectrum. Increased crystallinity was also obtained in the nanoparticles grown at high temperatures and for larger thicknesses. The evaluation of the LSPR sensor chips containing these crystalline AuNPs showed that high surface sensitivity of 28.89 nm/nm was obtained for a conformal thin film layer of Al 2 O 3 over the AuNPs, which is higher than what has been demonstrated earlier. These sensor chips containing crystalline AuNPs also show higher bulk sensitivity than what has been reported previously for AuNPs nanoparticles formed by template-free methods and annealing.