Elif Gültekin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elif Gültekin has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Halil İbRahim Çelik
Faculty of Engineering, Textile Engineering Department, Gaziantep University, Gaziantep, Turkey
5 shared publications Hatice Kübra Kaynak
Faculty of Engineering, Textile Engineering Department, Gaziantep University, Sehitkamil, Türkiye
4 shared publicationsHalil İbRahim Çelik
Faculty of Engineering, Textile Engineering Department, Gaziantep University, Sehitkamil, Türkiye
3 shared publications- Lale Canan Dülger
İzmir University of Economics
2 shared publications Aydın Başkar
GAZIANTEP UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING (ENGLISH)
1 shared publication- Burak Öztaş
Kahramanmaraş Sütçü İmam Üniversitesi
1 shared publication
Latest Publications
- 24 March 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (6) , 3025-3037
Smart Garment for sEMG Monitoring: Design, Integration, and Signal Quality Evaluation
- 24 March 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (6) , 3025-3037
Smart Garment for sEMG Monitoring: Design, Integration, and Signal Quality Evaluation
- 18 March 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (6) , 2687-2707
Effects of Fabric Structural Parameters on Electrical Performance Properties of Textile-Based Electrodes Under Simulated Usage Conditions
- 18 March 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (6) , 2687-2707
Effects of Fabric Structural Parameters on Electrical Performance Properties of Textile-Based Electrodes Under Simulated Usage Conditions
- Open Access
- 31 March 2024
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 31 (133) , 1-7
IMAGE PROCESSING APPROACH FOR FOREIGN MATERIAL DETECTION IN COTTON BUNDLE
The image processing philosophy is mainly determined by the complexity of the image and provides the necessary information to be derived from the image. In the textile industry, the image processing technique focuses on the determination of the geometric properties of the fibers such as cross-sectional shape, diameter, length, fineness, and curl while the studies on the yarn characteristics mostly focus on the determination of yarn hairiness, yarn unevenness and yarn defects (thick place, thin place and neps). In this study, previous studies about image processing approaches that are applied for fiber characteristics were investigated. A case study was conducted to automatically determine the visible foreign matter in the waste cotton bundle that can be used for recycled cotton yarn production. It was revealed that the image processing methods can be successfully applied for foreign fiber and matter detection in cotton bundle. As a result, it is emphasized that the waste cotton properties can be specified with a sensitive and accurate approach via image processing technique, objective and numerical determination can be obtained instead of visual evaluation based on experience.
- 31 March 2024
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 31 (133) , 1-7
Open AccessIMAGE PROCESSING APPROACH FOR FOREIGN MATERIAL DETECTION IN COTTON BUNDLE
The image processing philosophy is mainly determined by the complexity of the image and provides the necessary information to be derived from the image. In the textile industry, the image processing technique focuses on the determination of the geometric properties of the fibers such as cross-sectional shape, diameter, length, fineness, and curl while the studies on the yarn characteristics mostly focus on the determination of yarn hairiness, yarn unevenness and yarn defects (thick place, thin place and neps). In this study, previous studies about image processing approaches that are applied for fiber characteristics were investigated. A case study was conducted to automatically determine the visible foreign matter in the waste cotton bundle that can be used for recycled cotton yarn production. It was revealed that the image processing methods can be successfully applied for foreign fiber and matter detection in cotton bundle. As a result, it is emphasized that the waste cotton properties can be specified with a sensitive and accurate approach via image processing technique, objective and numerical determination can be obtained instead of visual evaluation based on experience.
- Open Access
- 31 December 2023
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 30 (132) , 297-301
INVESTIGATION OF TEXTILE BASED ELECTRODES FOR MONITORING sEMG MUSCLE SIGNAL
Wearable electronics are technological devices that are incorporated into garments with embedded systems and provide constant interaction with the user performing a specific task. This technology often focuses on devices to monitor physiological variables and seeks the most convenient and portable form for continuous monitoring. Although sEMG has emerged as a tool used in laboratory research for many years, with the development of technology in the fields of electricity, electronics, computers, and biomedicine, it has been used for different purposes in kinesiology (the branch of science dealing with human movements), rehabilitation, sports medicine, sports sciences, and many sports branches. In this study, textile based sEMG electrodes were produced by using knitting technology with silver plated polyamide conductive yarn with different densities. Then resistivity and sEMG signals of the produced samples and conventional disposable electrode were compared.
- 31 December 2023
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 30 (132) , 297-301
Open AccessINVESTIGATION OF TEXTILE BASED ELECTRODES FOR MONITORING sEMG MUSCLE SIGNAL
Wearable electronics are technological devices that are incorporated into garments with embedded systems and provide constant interaction with the user performing a specific task. This technology often focuses on devices to monitor physiological variables and seeks the most convenient and portable form for continuous monitoring. Although sEMG has emerged as a tool used in laboratory research for many years, with the development of technology in the fields of electricity, electronics, computers, and biomedicine, it has been used for different purposes in kinesiology (the branch of science dealing with human movements), rehabilitation, sports medicine, sports sciences, and many sports branches. In this study, textile based sEMG electrodes were produced by using knitting technology with silver plated polyamide conductive yarn with different densities. Then resistivity and sEMG signals of the produced samples and conventional disposable electrode were compared.
- 31 December 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 32 (4) , 344-352
A Novel Industrial Application of CNN Approach: Real Time Fabric Inspection and Defect Classification on Circular Knitting Machine
Fabric Automatic Visual Inspection (FAVI) system provides reliable performance on fabric defects inspection. This study presents a machine vision system developed to adapt in circular knitting machines where fabric defects can be automatically controlled and detected defects can be classified. The knitted fabric surface are detected during real-time manufacturing. For the classification process, three different transfer learning architectures (ResNet-50, AlexNet, GoogLeNet) have been applied. The five common knitted fabric defects were recognized with the artificial intelligence-based software and classified with an average success rate of 98% using ResNet-50 architecture. The success rates of the trained networks were compared.
- 31 December 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 32 (4) , 344-352
A Novel Industrial Application of CNN Approach: Real Time Fabric Inspection and Defect Classification on Circular Knitting Machine
Fabric Automatic Visual Inspection (FAVI) system provides reliable performance on fabric defects inspection. This study presents a machine vision system developed to adapt in circular knitting machines where fabric defects can be automatically controlled and detected defects can be classified. The knitted fabric surface are detected during real-time manufacturing. For the classification process, three different transfer learning architectures (ResNet-50, AlexNet, GoogLeNet) have been applied. The five common knitted fabric defects were recognized with the artificial intelligence-based software and classified with an average success rate of 98% using ResNet-50 architecture. The success rates of the trained networks were compared.
- 1 November 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 34 (1) , 1-10
A Machine Vision Solution for Industrial Application of Abrage Inspection and Diameter Measurement On Yarn Bobbins
The abrage fault inspection and bobbin diameter measurement are very important processes in yarn manufacturing industry. These processes are performed manually, and so they are difficult, low efficient, time-consuming processes. The abrage faults are seen as colour or shade difference on the dyed fabric. This happens when the bobbins including abrage are converted to the fabric form, mistakes in colour differences are seen after dyeing process. An automatic machine vision system was developed for detecting abrage fault, and bobbin diameter from yarn bobbin cross-section view. Image processing software was developed and applied on different sizes of bobbin samples including different types of abrage fault. The success of vision system was statistically evaluated by detecting the bobbin abrage faults with 95.83% accuracy. In addition, the bobbin diameters obtained from the developed image processing algorithm were statistically analysed and the correlation coefficient (R2=0.99) was calculated.
- 1 November 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 34 (1) , 1-10
A Machine Vision Solution for Industrial Application of Abrage Inspection and Diameter Measurement On Yarn Bobbins
The abrage fault inspection and bobbin diameter measurement are very important processes in yarn manufacturing industry. These processes are performed manually, and so they are difficult, low efficient, time-consuming processes. The abrage faults are seen as colour or shade difference on the dyed fabric. This happens when the bobbins including abrage are converted to the fabric form, mistakes in colour differences are seen after dyeing process. An automatic machine vision system was developed for detecting abrage fault, and bobbin diameter from yarn bobbin cross-section view. Image processing software was developed and applied on different sizes of bobbin samples including different types of abrage fault. The success of vision system was statistically evaluated by detecting the bobbin abrage faults with 95.83% accuracy. In addition, the bobbin diameters obtained from the developed image processing algorithm were statistically analysed and the correlation coefficient (R2=0.99) was calculated.
- 30 September 2020
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 27 (119) , 130-143
Spunlace (Su Jeti ile Bağlama) Teknolojisi ile Üretilen Dokusuz Yüzeylerin Morfolojik Özelliklerinden Bazı Performans Özelliklerinin Yapay Zeka ile Tahminlenmesi
- 30 September 2020
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 27 (119) , 130-143
Spunlace (Su Jeti ile Bağlama) Teknolojisi ile Üretilen Dokusuz Yüzeylerin Morfolojik Özelliklerinden Bazı Performans Özelliklerinin Yapay Zeka ile Tahminlenmesi
- 18 February 2020
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 111 (11) , 1641-1651
Predicting air permeability and porosity of nonwovens with image processing and artificial intelligence methods
This study was conducted to investigate the relationship between the fiber distribution and the permeability properties of the hydroentangled nonwoven fabrics in terms of air permeability and porosity. The fiber distribution and web properties of the hydroentangled nonwoven fabrics have significant influence on mechanical and physical performance of the finished products. Control of these properties during production, without physical testing, plays an important role in reducing response time to change the process parameters as well as production costs and material waste. In this study, an artificial intelligence method has been developed to predict the porosity and air permeability properties of hydroentangled nonwoven fabrics from their texture features. For this aim, two image processing algorithms were developed in order to measure the fabric porosity and to extract texture statistical features. For the prediction of the investigated fabric properties, an Artificial Neural Network (ANN) model was built. The investigated samples were composed of Polyester (PES) and Viscose (CV) fiber with different areal weights. High regression values were obtained between predicted and actual values for both porosity and air-permeability properties. According to ANN results, it was revealed that the air permeability and porosity properties of hydroentangled nonwovens can be predicted with high accuracy from their texture images.
- 18 February 2020
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 111 (11) , 1641-1651
Predicting air permeability and porosity of nonwovens with image processing and artificial intelligence methods
This study was conducted to investigate the relationship between the fiber distribution and the permeability properties of the hydroentangled nonwoven fabrics in terms of air permeability and porosity. The fiber distribution and web properties of the hydroentangled nonwoven fabrics have significant influence on mechanical and physical performance of the finished products. Control of these properties during production, without physical testing, plays an important role in reducing response time to change the process parameters as well as production costs and material waste. In this study, an artificial intelligence method has been developed to predict the porosity and air permeability properties of hydroentangled nonwoven fabrics from their texture features. For this aim, two image processing algorithms were developed in order to measure the fabric porosity and to extract texture statistical features. For the prediction of the investigated fabric properties, an Artificial Neural Network (ANN) model was built. The investigated samples were composed of Polyester (PES) and Viscose (CV) fiber with different areal weights. High regression values were obtained between predicted and actual values for both porosity and air-permeability properties. According to ANN results, it was revealed that the air permeability and porosity properties of hydroentangled nonwovens can be predicted with high accuracy from their texture images.
- 31 December 2019
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 26 (116) , 340-345
Image Processing Applications on Yarn Characteristics and Fault Inspection
- 31 December 2019
- Published by UCTEA Chamber of Textile Engineers in Tekstil ve Mühendis
- Vol. 26 (116) , 340-345
Image Processing Applications on Yarn Characteristics and Fault Inspection
- 29 November 2019
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 22, 57-63
DESIGN OF AN IMAGE PROCESSING SYSTEM FOR FABRIC DRAPE MEASUREMENT
Fabric drapeability is an important parameter that affects the apparelcomfort and appearance of the fabric. Fabric drape measurement is based oncalculating the shadow area of the hanged fabric created due to its weight.This measurement is performed manually and therefore a subjective assessment ismade. Today, with the developments in image acquisition technology and imageprocessing methods, many measurements and evaluations can be made objectivelyand accurately by adapting vision systems. In this study, an example prototypesystem with which fabric drape can be measured by image processing techniquesis presented. The designed system consists of machine vision hardware, equipmentand image processing software. The system was tested on 12 different types ofwoven and knitted fabrics. The fabric samples were selected randomly. Drapemeasurements were performed with developed image processing software. The samesamples were also applied bending length and Cusick drapeability tests to confirmthe results obtained by image processing (IP) method and the relationshipbetween the three measurements was determined by regression analysis. As aresult, 0.92 and 0.84 R2 values were obtained between IP method andbending length and Cusick drapeablility results respectively.
- 29 November 2019
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 22, 57-63
DESIGN OF AN IMAGE PROCESSING SYSTEM FOR FABRIC DRAPE MEASUREMENT
Fabric drapeability is an important parameter that affects the apparelcomfort and appearance of the fabric. Fabric drape measurement is based oncalculating the shadow area of the hanged fabric created due to its weight.This measurement is performed manually and therefore a subjective assessment ismade. Today, with the developments in image acquisition technology and imageprocessing methods, many measurements and evaluations can be made objectivelyand accurately by adapting vision systems. In this study, an example prototypesystem with which fabric drape can be measured by image processing techniquesis presented. The designed system consists of machine vision hardware, equipmentand image processing software. The system was tested on 12 different types ofwoven and knitted fabrics. The fabric samples were selected randomly. Drapemeasurements were performed with developed image processing software. The samesamples were also applied bending length and Cusick drapeability tests to confirmthe results obtained by image processing (IP) method and the relationshipbetween the three measurements was determined by regression analysis. As aresult, 0.92 and 0.84 R2 values were obtained between IP method andbending length and Cusick drapeablility results respectively.