Ramir Ristić
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ramir Ristić has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Ignacio Alejandro Figueroa
Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Coyoacan, Mexico
10 shared publications - Emil Babić
Department of Physics, Faculty of Science, University of Zagreb, 10000 Zagreb, Croatia
6 shared publications Krešo Zadro
Department of Physics, Faculty of Science 4 , Bijenička Cesta 32, HR-10002 Zagreb, Croatia
6 shared publicationsDamir Pajić
Department of Physics, Faculty of Science, Zagreb HR-10002, Croatia
5 shared publicationsE. Babić
Department of Physics Faculty of Science University of Zagreb Zagreb Croatia
5 shared publicationsEmil Babić
Department of Physics, Faculty of Science, Zagreb HR-10002, Croatia
5 shared publications
Latest Publications
- Open Access
A New Insight into the Electronic Structure Property Relationships in Glassy Ti-Zr-Nb-(Cu,Ni,Co) Alloys
In this work we revisit a vast amount of existing data on physical properties of Ti-Zr-Nb-(Cu,Ni,Co) glassy alloys over a broad range of concentrations (from the high-entropy range to that of conventional Cu-, Ni- or Co-rich alloys). By using our new approach based on the total content of late transition metal(s), we derive a number of physical parameters of a hypothetical amorphous TiZrNb alloy: lattice parameter Å, Sommerfeld coefficient , density of states at , magnetic susceptibility mJ/mol, superconducting transition temperature K, upper critical field T, and coherence length Å. We show that our extrapolated results for the amorphous TiZrNb alloy would be similar to that of crystalline TiZrNb, except for superconducting properties (most notably the upper critical field ), which might be attributed to the strong topological disorder of the amorphous phase. Also, we offer an explanation of the discrepancy between the variations in with the average number of valency electrons in neighboring alloys of 4d transition metals and some high-entropy alloys. Overall, we find that our novel method of systematic analysis of results is rather general, as it can provide reliable estimates of the properties of any alloy which has not been prepared as yet.Open AccessA New Insight into the Electronic Structure Property Relationships in Glassy Ti-Zr-Nb-(Cu,Ni,Co) Alloys
In this work we revisit a vast amount of existing data on physical properties of Ti-Zr-Nb-(Cu,Ni,Co) glassy alloys over a broad range of concentrations (from the high-entropy range to that of conventional Cu-, Ni- or Co-rich alloys). By using our new approach based on the total content of late transition metal(s), we derive a number of physical parameters of a hypothetical amorphous TiZrNb alloy: lattice parameter Å, Sommerfeld coefficient , density of states at , magnetic susceptibility mJ/mol, superconducting transition temperature K, upper critical field T, and coherence length Å. We show that our extrapolated results for the amorphous TiZrNb alloy would be similar to that of crystalline TiZrNb, except for superconducting properties (most notably the upper critical field ), which might be attributed to the strong topological disorder of the amorphous phase. Also, we offer an explanation of the discrepancy between the variations in with the average number of valency electrons in neighboring alloys of 4d transition metals and some high-entropy alloys. Overall, we find that our novel method of systematic analysis of results is rather general, as it can provide reliable estimates of the properties of any alloy which has not been prepared as yet. - Open Access
- 27 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (22)
Electronic structure–property relationship in an Al0.5TiZrPdCuNi high-entropy alloy
The valence band (VB) structure of an Al0.5TiZrPdCuNi high-entropy alloy (HEA) obtained using x-ray photoelectron spectroscopy has been compared to that recently calculated by Odbadrakh et al. [J. Appl. Phys. 126, 095104 (2019)]. Both the experimental and theoretical VBs show a split-band structure, typical for alloys consisting of the early (TE) and late (TL) transition metals. Accordingly, several electronic structure (ES) properties of this alloy, both in the glassy and crystalline state, are compared with those of similar TE-TL alloys. The comparison shows a strong effect of alloying with Al on the density of states at the Fermi level, N(EF), and on the magnetic susceptibility of Al0.5TiZrPdCuNi HEA, similar to that in conventional glassy alloys, such as Zr-Cu-Al ones. Despite some similarity in the theoretical and experimental density of states of the VBs, there are significant differences between them, which should be taken into account in any future studies of ES in HEAs and other compositionally complex alloys.
- 27 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (22)
Open AccessElectronic structure–property relationship in an Al0.5TiZrPdCuNi high-entropy alloy
The valence band (VB) structure of an Al0.5TiZrPdCuNi high-entropy alloy (HEA) obtained using x-ray photoelectron spectroscopy has been compared to that recently calculated by Odbadrakh et al. [J. Appl. Phys. 126, 095104 (2019)]. Both the experimental and theoretical VBs show a split-band structure, typical for alloys consisting of the early (TE) and late (TL) transition metals. Accordingly, several electronic structure (ES) properties of this alloy, both in the glassy and crystalline state, are compared with those of similar TE-TL alloys. The comparison shows a strong effect of alloying with Al on the density of states at the Fermi level, N(EF), and on the magnetic susceptibility of Al0.5TiZrPdCuNi HEA, similar to that in conventional glassy alloys, such as Zr-Cu-Al ones. Despite some similarity in the theoretical and experimental density of states of the VBs, there are significant differences between them, which should be taken into account in any future studies of ES in HEAs and other compositionally complex alloys.
- 15 November 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (19) , 195102
Transition from high-entropy to conventional (TiZrNbCu)1−xCox metallic glasses
In this article, we describe the characterization of a newly fabricated amorphous alloy system (TiZrNbCu)1−xCox covering a broad composition range from high-entropy (HEA) to Co-rich alloys (x ≤ 0.43). We investigated thermal stability, atomic and electronic structure, and magnetic and mechanical properties as a function of chemical composition x. One of the important findings is that all studied properties change their dependence on concentration x within the HEA range. In particular, it has been found that the average atomic volume deviates from Vegard’s law for x > 0.2, the concentration for which the average atomic packing fraction suddenly changes. The valence band structure, studied with ultraviolet photoemission spectroscopy, shows a split-band shape with 3d-states of Co approaching the Fermi level on increasing x. Due to the onset of magnetic correlations, magnetic susceptibility rapidly increases for x > 0.25. Very high microhardness increases rapidly with x. The results are compared with those for similar binary and quinary metallic glasses and with those for Cantor type of crystalline alloys.
- 15 November 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (19) , 195102
Transition from high-entropy to conventional (TiZrNbCu)1−xCox metallic glasses
In this article, we describe the characterization of a newly fabricated amorphous alloy system (TiZrNbCu)1−xCox covering a broad composition range from high-entropy (HEA) to Co-rich alloys (x ≤ 0.43). We investigated thermal stability, atomic and electronic structure, and magnetic and mechanical properties as a function of chemical composition x. One of the important findings is that all studied properties change their dependence on concentration x within the HEA range. In particular, it has been found that the average atomic volume deviates from Vegard’s law for x > 0.2, the concentration for which the average atomic packing fraction suddenly changes. The valence band structure, studied with ultraviolet photoemission spectroscopy, shows a split-band shape with 3d-states of Co approaching the Fermi level on increasing x. Due to the onset of magnetic correlations, magnetic susceptibility rapidly increases for x > 0.25. Very high microhardness increases rapidly with x. The results are compared with those for similar binary and quinary metallic glasses and with those for Cantor type of crystalline alloys.
- Open Access
Transition from High-Entropy to Conventional Alloys: Which Are Better?
The study of the transition from high-entropy alloys (HEAs) to conventional alloys (CAs) composed of the same alloying components is apparently important, both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of the corresponding CAs. However, this transition has thus far been studied in only two types of alloy systems: crystalline alloys of iron group metals (such as the Cantor alloy and its derivatives) and both amorphous (a-) and crystalline alloys, TE-TL, of early (TE = Ti, Zr, Nb, Hf) and late (TL = Co, Ni, Cu) transition metals. Here, we briefly overview the main results for the transition from HEAs to CAs in these alloy systems and then present new results for the electronic structure (ES), studied with photoemission spectroscopy and specific heat, atomic structure, thermal, magnetic and mechanical properties of a-TE-TL and Cantor-type alloys. A change in the properties of the alloys studied on crossing from the HEA to the CA concentration range mirrors that in the ES. The compositions of the alloys having the best properties depend on the alloy system and the property selected. This emphasizes the importance of knowing the ES for the design of new compositional complex alloys with the desired properties.
Open AccessTransition from High-Entropy to Conventional Alloys: Which Are Better?
The study of the transition from high-entropy alloys (HEAs) to conventional alloys (CAs) composed of the same alloying components is apparently important, both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of the corresponding CAs. However, this transition has thus far been studied in only two types of alloy systems: crystalline alloys of iron group metals (such as the Cantor alloy and its derivatives) and both amorphous (a-) and crystalline alloys, TE-TL, of early (TE = Ti, Zr, Nb, Hf) and late (TL = Co, Ni, Cu) transition metals. Here, we briefly overview the main results for the transition from HEAs to CAs in these alloy systems and then present new results for the electronic structure (ES), studied with photoemission spectroscopy and specific heat, atomic structure, thermal, magnetic and mechanical properties of a-TE-TL and Cantor-type alloys. A change in the properties of the alloys studied on crossing from the HEA to the CA concentration range mirrors that in the ES. The compositions of the alloys having the best properties depend on the alloy system and the property selected. This emphasizes the importance of knowing the ES for the design of new compositional complex alloys with the desired properties.
- Open Access
- 21 October 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 126 (15) , 154105
Transition from high-entropy to Cu-based (TiZrNbNi)1−xCux metallic glasses
A study of a transition from conventional multicomponent alloys to high-entropy alloys (HEAs) is important both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of conventional alloys. We report the main result of such a study performed on (TiZrNbNi)1−xCux metallic glasses (MG) over a broad concentration range x ≤ 0.52 encompassing both high-entropy-MGs and Cu-based MGs. A comprehensive study of the composition, homogeneity, thermal stability, atomic structure, electronic structure, and magnetic susceptibility of 11 alloys has been performed. Thermal analysis revealed a rather weak variation of thermal parameters and glass forming ability with x. The study of the atomic structure showed a linear variation of average interatomic distances and atomic volumes close to those predicted by Vegard's law. The coordination numbers and atomic packing fractions were constant throughout the explored concentration range. The electronic density of states (DOS) showed a split-band structure with DOS close to the Fermi level dominated with d-states of Ti, Zr, and Nb. Accordingly, magnetic susceptibility decreased linearly with x and extrapolated to that of Cu. Thus, the studied alloys show ideal solution behavior similar to that of binary Cu-Ti, Zr, and Hf MGs. The results are compared with those for (TiZrNbCu)1−xNix MGs and (CrMnFeCo)1−xNix alloys and their impact on understanding the transition from high-entropy-MGs to conventional MGs with the same composition is briefly discussed.
- 21 October 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 126 (15) , 154105
Open AccessTransition from high-entropy to Cu-based (TiZrNbNi)1−xCux metallic glasses
A study of a transition from conventional multicomponent alloys to high-entropy alloys (HEAs) is important both for understanding the formation of HEAs and for proper evaluation of their potential with respect to that of conventional alloys. We report the main result of such a study performed on (TiZrNbNi)1−xCux metallic glasses (MG) over a broad concentration range x ≤ 0.52 encompassing both high-entropy-MGs and Cu-based MGs. A comprehensive study of the composition, homogeneity, thermal stability, atomic structure, electronic structure, and magnetic susceptibility of 11 alloys has been performed. Thermal analysis revealed a rather weak variation of thermal parameters and glass forming ability with x. The study of the atomic structure showed a linear variation of average interatomic distances and atomic volumes close to those predicted by Vegard's law. The coordination numbers and atomic packing fractions were constant throughout the explored concentration range. The electronic density of states (DOS) showed a split-band structure with DOS close to the Fermi level dominated with d-states of Ti, Zr, and Nb. Accordingly, magnetic susceptibility decreased linearly with x and extrapolated to that of Cu. Thus, the studied alloys show ideal solution behavior similar to that of binary Cu-Ti, Zr, and Hf MGs. The results are compared with those for (TiZrNbCu)1−xNix MGs and (CrMnFeCo)1−xNix alloys and their impact on understanding the transition from high-entropy-MGs to conventional MGs with the same composition is briefly discussed.
- 26 June 2018
- Published by Springer Nature in Journal of Materials Research
- Vol. 33 (19) , 3170-3183
Structure property relationship in (TiZrNbCu)1−xNix metallic glasses
- 26 June 2018
- Published by Springer Nature in Journal of Materials Research
- Vol. 33 (19) , 3170-3183
Structure property relationship in (TiZrNbCu)1−xNix metallic glasses
- Open AccessProperties of $(TiZrNbCu)_{1-x}$$Ni_{x}$ Metallic GlassesRecent studies (J. Alloys Compd. 695 (2017) 2661) of the electronic structure and properties of $(TiZrNbCu)_{1-x}$$Ni_{x}$ (x$\leq$0.25) amorphous high entropy alloys (a-HEA) have been extended to x=0.5 in order to compare behaviours of a-HEA and conventional Ni-base metallic glasses (MG). The amorphous state of all samples was verified by thermal analysis and X-ray diffraction (XRD). XRD indicated a probable change in local atomic arrangements, i.e. short-range-order (SRO) for x$\geq$0.35. Simultaneously, thermal parameters, such as the first crystallization temperature $T_{x}$ and the liquidus temperature showed a tendency to saturate for x$\geq$0.35 . The same tendency also appeared in the magnetic susceptibility $\chi_{exp}$ and the linear term in the low temperature specific heat {\gamma}. The Debye temperatures and Youngs moduli also tend to saturate for x$\geq$0.35. These unusual changes in SRO and all properties within the amorphous phase seem correlated with the change of valence electron number (VEC) on increasing x.Open AccessProperties of $(TiZrNbCu)_{1-x}$$Ni_{x}$ Metallic GlassesRecent studies (J. Alloys Compd. 695 (2017) 2661) of the electronic structure and properties of $(TiZrNbCu)_{1-x}$$Ni_{x}$ (x$\leq$0.25) amorphous high entropy alloys (a-HEA) have been extended to x=0.5 in order to compare behaviours of a-HEA and conventional Ni-base metallic glasses (MG). The amorphous state of all samples was verified by thermal analysis and X-ray diffraction (XRD). XRD indicated a probable change in local atomic arrangements, i.e. short-range-order (SRO) for x$\geq$0.35. Simultaneously, thermal parameters, such as the first crystallization temperature $T_{x}$ and the liquidus temperature showed a tendency to saturate for x$\geq$0.35 . The same tendency also appeared in the magnetic susceptibility $\chi_{exp}$ and the linear term in the low temperature specific heat {\gamma}. The Debye temperatures and Youngs moduli also tend to saturate for x$\geq$0.35. These unusual changes in SRO and all properties within the amorphous phase seem correlated with the change of valence electron number (VEC) on increasing x.
- Open Access
Electronic structure and glass forming ability in early and late transition metal alloys
A correlation between the change in magnetic susceptibility ({\Delta}\c{hi}exp) upon crystallization of Cu-Zr, Hf metallic glasses (MG) with their glass forming ability (GFA) observed recently is found to apply to Cu-Ti and Zr-Ni alloys, too. In particular, a small {\Delta}\c{hi}exp , which reflects similar electronic structures, ES, of glassy and corresponding crystalline alloys, corresponds to high GFA. Here, we studied {\Delta}\c{hi}exp in five Cu-Ti and four Cu-Zr and Ni-Zr MGs. The fully crystalline final state of all alloys was verified from X-ray diffraction patterns. The variation of GFA with composition in Cu-Ti, Cu-Zr and Cu-Hf MGs was established from the variation of the corresponding critical casting thickness, dc. Due to the absence of data for dc in Ni-Zr MGs their GFA was described by using empirical criteria, such as the reduced glass transition temperature. A very good correlation between {\Delta}\c{hi}exp and dc (and/or other criteria for GFA) was observed for all alloys studied. The correlation between the ES and GFA showed up best for Cu-Zr and NiZr2 alloys where direct data for the change in ES ({\Delta}ES) upon crystallization are available. The applicability of the {\Delta}\c{hi}exp ({\Delta}ES) criterion for high GFA (which provides a simple way to select the compositions with high GFA) to other metal-metal MGs (including ternary and multicomponent bulk MGs) is briefly discussed.
Open AccessElectronic structure and glass forming ability in early and late transition metal alloys
A correlation between the change in magnetic susceptibility ({\Delta}\c{hi}exp) upon crystallization of Cu-Zr, Hf metallic glasses (MG) with their glass forming ability (GFA) observed recently is found to apply to Cu-Ti and Zr-Ni alloys, too. In particular, a small {\Delta}\c{hi}exp , which reflects similar electronic structures, ES, of glassy and corresponding crystalline alloys, corresponds to high GFA. Here, we studied {\Delta}\c{hi}exp in five Cu-Ti and four Cu-Zr and Ni-Zr MGs. The fully crystalline final state of all alloys was verified from X-ray diffraction patterns. The variation of GFA with composition in Cu-Ti, Cu-Zr and Cu-Hf MGs was established from the variation of the corresponding critical casting thickness, dc. Due to the absence of data for dc in Ni-Zr MGs their GFA was described by using empirical criteria, such as the reduced glass transition temperature. A very good correlation between {\Delta}\c{hi}exp and dc (and/or other criteria for GFA) was observed for all alloys studied. The correlation between the ES and GFA showed up best for Cu-Zr and NiZr2 alloys where direct data for the change in ES ({\Delta}ES) upon crystallization are available. The applicability of the {\Delta}\c{hi}exp ({\Delta}ES) criterion for high GFA (which provides a simple way to select the compositions with high GFA) to other metal-metal MGs (including ternary and multicomponent bulk MGs) is briefly discussed.
- 10 December 2017
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 98 (8) , 693-709
Electronic structure and glass forming ability in early and late transition metal alloys
A correlation between the change in magnetic susceptibility (Δχexp) upon crystallisation of Cu–Zr and Hf metallic glasses (MG) with their glass forming ability (GFA) observed recently, is found to apply to Cu–Ti and Zr–Ni alloys, too. In particular, small Δχexp, which reflects similar electronic structures, ES, of glassy and corresponding crystalline alloys, corresponds to high GFA. Here, we studied Δχexp for five Cu–Ti and four Cu–Zr and Ni–Zr MGs. The fully crystalline final state of all alloys was verified from X-ray diffraction patterns. The variation of GFA with composition in Cu–Ti, Cu–Zr and Cu–Hf MGs was established from the variation of the corresponding critical casting thickness, dc. Due to the absence of data for dc in Ni–Zr MGs their GFA was described using empirical criteria, such as the reduced glass transition temperature. A very good correlation between Δχexp and dc (and/or other criteria for GFA) was observed for all alloys studied. The correlation between the ES and GFA showed up best for Cu–Zr and NiZr2 alloys where direct data for the change in ES (ΔES) upon crystallisation are available. The applicability of the Δχexp (ΔES) criterion for high GFA (which provides a simple way to select the compositions with high GFA) to other metal-metal MGs (including ternary and multicomponent bulk MGs) is briefly discussed.
- 10 December 2017
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 98 (8) , 693-709
Electronic structure and glass forming ability in early and late transition metal alloys
A correlation between the change in magnetic susceptibility (Δχexp) upon crystallisation of Cu–Zr and Hf metallic glasses (MG) with their glass forming ability (GFA) observed recently, is found to apply to Cu–Ti and Zr–Ni alloys, too. In particular, small Δχexp, which reflects similar electronic structures, ES, of glassy and corresponding crystalline alloys, corresponds to high GFA. Here, we studied Δχexp for five Cu–Ti and four Cu–Zr and Ni–Zr MGs. The fully crystalline final state of all alloys was verified from X-ray diffraction patterns. The variation of GFA with composition in Cu–Ti, Cu–Zr and Cu–Hf MGs was established from the variation of the corresponding critical casting thickness, dc. Due to the absence of data for dc in Ni–Zr MGs their GFA was described using empirical criteria, such as the reduced glass transition temperature. A very good correlation between Δχexp and dc (and/or other criteria for GFA) was observed for all alloys studied. The correlation between the ES and GFA showed up best for Cu–Zr and NiZr2 alloys where direct data for the change in ES (ΔES) upon crystallisation are available. The applicability of the Δχexp (ΔES) criterion for high GFA (which provides a simple way to select the compositions with high GFA) to other metal-metal MGs (including ternary and multicomponent bulk MGs) is briefly discussed.
- Open Access
Electronic structure and properties of (TiZrNbCu)_1-xNi_x high entropy amorphous alloys
A comprehensive study of selected properties of four (TiZrNbCu)_1-xNi_x (x \le 0.25) amorphous high entropy alloys (a-HEA) has been performed. The samples were ribbons about 20 \mum thick and their fully amorphous state was verified by X-ray diffraction and thermal analysis. The surface morphology, precise composition and the distribution of components were studied with a Scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS) attachment. The properties selected were the melting temperature (T_m), the low temperature specific heat (LTSH), the magnetic susceptibility \chi_exp and the Young^,s modulus (E). Whereas LTSH and \chi_exp were measured for the as-cast samples, E was measured both for as-cast samples and relaxed samples (after a short anneal close to the glass transition temperature). The LTSH showed that the electronic density of states at the Fermi level, N_0(E_F), decreases with increasing x, whereas the Debye temperature (\theta_D) increases with x. This is similar to what is observed in binary and ternary amorphous alloys of early transition metals (TE) with late transition metals (TL) and indicates that N_0(E_F) is dominated by the d-electrons of the TE. The LTSH also showed the absence of superconductivity down to 1.8K and indicated the emergence of the Boson peak above 4K in all alloys.The free-electron like paramagnetic contribution to \chi_exp also decreases with x, whereas E, like \theta_D, increases with x, indicating enhanced interatomic bonding on addition of Ni. The applicability of the rule of mixtures to these and other similar HEAs is briefly discussed.
Open AccessElectronic structure and properties of (TiZrNbCu)_1-xNi_x high entropy amorphous alloys
A comprehensive study of selected properties of four (TiZrNbCu)_1-xNi_x (x \le 0.25) amorphous high entropy alloys (a-HEA) has been performed. The samples were ribbons about 20 \mum thick and their fully amorphous state was verified by X-ray diffraction and thermal analysis. The surface morphology, precise composition and the distribution of components were studied with a Scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS) attachment. The properties selected were the melting temperature (T_m), the low temperature specific heat (LTSH), the magnetic susceptibility \chi_exp and the Young^,s modulus (E). Whereas LTSH and \chi_exp were measured for the as-cast samples, E was measured both for as-cast samples and relaxed samples (after a short anneal close to the glass transition temperature). The LTSH showed that the electronic density of states at the Fermi level, N_0(E_F), decreases with increasing x, whereas the Debye temperature (\theta_D) increases with x. This is similar to what is observed in binary and ternary amorphous alloys of early transition metals (TE) with late transition metals (TL) and indicates that N_0(E_F) is dominated by the d-electrons of the TE. The LTSH also showed the absence of superconductivity down to 1.8K and indicated the emergence of the Boson peak above 4K in all alloys.The free-electron like paramagnetic contribution to \chi_exp also decreases with x, whereas E, like \theta_D, increases with x, indicating enhanced interatomic bonding on addition of Ni. The applicability of the rule of mixtures to these and other similar HEAs is briefly discussed.