FGFarshid Ghezelbash

Farshid Ghezelbash

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Farshid Ghezelbash has a total of 26 co-authors. Here are the top co-authors by number of shared publications:

  • Aboulfazl Shirazi-Adl

    Division of Applied Mechanics, Department of Mechanical Engineering, Polytechnique Montréal, Montreal, Canada

    8 shared publications
  • Amir Hossein Eskandari

    Division of Applied Mechanics, Department of Mechanical Engineering, Polytechnique Montréal, Montreal, Canada

    4 shared publications
  • Christian Larivière

    Institut de recherche Robert Sauvé en santé et en sécurité du travail, Montréal, Canada

    4 shared publications
  • A. Plamondon

    Institut de recherche Robert Sauvé en santé et en sécurité du travail, Montréal, Canada

    3 shared publications
  • A. Shirazi-Adl

    Division of Applied Mechanics, Department of Mechanical Engineering, Polytechnique Montréal, Canada

    3 shared publications
  • N. Arjmand

    Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran

    3 shared publications

Latest Publications

  • Development and validation of a subject-specific integrated finite element musculoskeletal model of human trunk with ergonomic and clinical applications

    by Farshid Ghezelbash, Amir Hossein Eskandari, Amir Jafari Bidhendi, Aboulfazl Shirazi-Adl, Christian Larivière

    Biomechanical modeling of the human trunk is crucial for understanding spinal mechanics and its role in ergonomics and clinical interventions. Traditional models have been limited by only considering the passive structures of the spine in finite element (FE) models or incorporating active muscular components in multi-body musculoskeletal (MS) models with an oversimplified spine. To address those limitations, we developed a subject-specific coupled FE-MS model of the trunk and explored its applications in ergonomics and surgical interventions. A parametric detailed FE model was constructed, integrated with a muscle architecture, and individualized based on existing datasets. Our comprehensive validation encompassed tissue-level responses, segment-level mechanics, and whole-spine behavior across multiple subjects and loading conditions, demonstrating satisfactory performance in ergonomics (i.e., wearing exoskeleton) and clinical interventions (nucleotomy and spinal fusion). The model accurately predicted tissue-level stresses (in uni- and biaxial loading), whole-spine motion (i.e., moment rotation response was in agreement with in vitro measurements), intradiscal pressures (RMSE = 0.12 MPa; R2 = 0.72), and muscle activities (matching EMG trends across 19 subjects during forward flexion). Wearing an exoskeleton reduced intradiscal pressures (1.9 vs. 2.2 MPa at L4–L5) and peak von Mises stresses in the annulus fibrosus (2.2 vs. 2.9 MPa) during forward flexion. Spinal fusion (at L4–L5) increased the intradiscal pressure in the upper adjacent disc (1.72 MPa vs. 1.58 MPa), but nucleotomy had a minimal effect on the intact intradiscal pressures. Nucleotomy substantially affected the load transfer at the same level by increasing facet contact loads and annulus radial strains. Unlike conventional MS models with simplified spine, and in contrast to passive models (without active components), this model provides crucial outputs such as strain/stress fields in discs/facets (essential for a comprehensive risk analysis). This integrated approach enables more accurate surgical planning, workplace safety design, and personalized rehabilitation strategies, helping reduce spine-related injuries by identifying risk factors and optimizing interventions for individual patients.


  • Machine learning applications in spine biomechanics

    by Farshid Ghezelbash, Amir Hossein Eskandari, Xavier Robert-Lachaine, Shufan Cao, Mehran Pesteie, Zhuohua Qiao, Aboulfazl Shirazi-Adl, Christian Larivière


  • Open Access

    Machine Learning Applications in Spine Biomechanics

    by Farshid Ghezelbash, Amir Hossein Eskandari, Xavier Robert-Lachaine, Frank Cao, Mehran Pesteie, Zhuohua Qiao, Aboulfazl Shirazi-Adl, Christian Larivière

    Spine biomechanics is at a transformation with the advent and integration of machine learning and computer vision technologies. These novel techniques facilitate the estimation of 3D body shapes, anthropometrics, and kinematics from as simple as a single-camera image, making them more accessible and practical for a diverse range of applications. This study introduces a framework that merges these methodologies with traditional musculoskeletal modeling, enabling comprehensive analysis of spinal biomechanics during complex activities from a single camera. Additionally, we aim to evaluate their performance and limitations in spine biomechanics applications. The real-world applications explored in this study include assessment in workplace lifting, evaluation of whiplash injuries in car accidents, and biomechanical analysis in professional sports. Our results demonstrate potential and limitations of various algorithms in estimating body shape, kinematics, and conducting in-field biomechanical analyses. In industrial settings, the potential to utilize these new technologies for biomechanical risk assessments offers a pathway for preventive measures against back injuries. In sports activities, the proposed framework provides new opportunities for performance optimization, injury prevention, and rehabilitation. The application in forensic domain further underscores the wide-reaching implications of this technology. While certain limitations were identified, particularly in accuracy of predictions, complex interactions, and external load estimation, this study demonstrates their potential for advancement in spine biomechanics, heralding an optimistic future in both research and practical applications.

  • Open Access

    Development and validation of a subject-specific integrated finite element musculoskeletal model of human trunk with ergonomic and clinical applications

    by Farshid Ghezelbash, Amir Hossein Eskandari, Aboulfazl Shirazi-Adl, Christian Larivière

    Background and Objectives Biomechanical modeling of the human trunk is crucial for understanding spinal mechanics and its role in ergonomics and clinical interventions. Traditional models have been limited by only considering the passive structures of the spine in finite element (FE) models or incorporating active muscular components in multi-body musculoskeletal (MS) models with an oversimplified spine. This study aimed to develop and validate a subject-specific coupled FE-MS model of the trunk that integrates detailed representation of both the passive and active components for biomechanical simulations. Methods We constructed a parametric FE model of the trunk, incorporating a realistic muscle architecture, personalized through imaging datasets and statistical shape models. To validate the model, we compared tissue-level responses with in vitro experiments, and muscle activities and intradiscal pressures versus in vivo measurements during various physical activities. We further demonstrated the versatility of the proposed personalized integrated framework through additional applications in ergonomics (i.e., wearing an exoskeleton) and surgical interventions (e.g., nucleotomy and spinal fusion). Results The model demonstrated satisfactory agreement with experimental data, showcasing its validity to predict tissue- and disc-level responses accurately, as well as muscle activity and intradiscal pressures. When simulating ergonomics scenarios, the exoskeleton-wearing condition resulted in lower intradiscal pressures (1.9 MPa vs. 2.2 MPa at L4-L5) and peak von Mises stresses in the annulus fibrosus (2.2 MPa vs. 2.9 MPa) during forward flexion. In the context of surgical interventions, spinal fusion at L4-L5 led to increased intradiscal pressure in the adjacent upper disc (1.72 MPa vs. 1.58 MPa), whereas nucleotomy minimally influenced intact disc pressures but significantly altered facet joint loads and annulus fibrosus radial strains. Conclusions The integrated FE-MS model of the trunk represents a significant advancement in biomechanical simulations, providing insights into the intricate interplay between active and passive spinal components. Its predictive capability extends beyond that of conventional models, enabling detailed risk analysis and the simulation of varied surgical outcomes. This comprehensive tool has potential implications for the design of ergonomic interventions and the optimization of surgical techniques to minimize detrimental effects on spinal mechanics.

  • Evaluating stability of human spine in static tasks: a combined in vivo-computational study

    by Farshid Ghezelbash, Ali Shahvarpour, Christian Larivière, Aboulfazl Shirazi-Adl

    Various interpretations and parameters have been proposed to assess spinal stability such as antagonist muscle coactivity, trunk stiffness and spinal buckling load; however, the correlation between these parameters remains unknown. We evaluated spinal stability during different tasks while changing the external moment and load height and investigated likely relationships between different EMG- and model-based parameters (e.g., EMG coactivity ratio, trunk stiffness, force coactivity ratio) and stability margins. EMG and kinematics of 40 young healthy subjects were recorded during various quasi-static tasks. Muscle forces, trunk stiffness and stability margins were calculated by a nonlinear subject-specific EMG-assisted-optimization musculoskeletal model of the trunk. The load elevation and external moment increased muscle activities and trunk stiffness while all stability margins (i.e., buckling loads) decreased. The force coactivity ratio was strongly correlated with the hand-load stability margin (i.e., additional weight in hands to initiate instability; R2 = 0.54) demonstrating the stabilizing role of abdominal muscles. The total trunk stiffness (Pearson’s r = 0.96) and the sum of EMGs of back muscles (Pearson’s r = 0.65) contributed the most to the T1 stability margin (i.e., additional required load at T1 for instability/buckling). Force coactivity ratio and trunk stiffness can be used as alternative spinal stability metrics.


  • Modeling of human intervertebral disc annulus fibrosus with complex multi-fiber networks

    by Farshid Ghezelbash, Amir Hossein Eskandari, Aboulfazl Shirazi-Adl, Morteza Kazempour, Javad Tavakoli, Mostafa Baghani, John J Costi


  • Effects of motion segment simulation and joint positioning on spinal loads in trunk musculoskeletal models

    by F. Ghezelbash, A.H. Eskandari, A. Shirazi-Adl, N. Arjmand, Z. El-Ouaaid, A. Plamondon