SSSallolo Suluh

Sallolo Suluh

*This is an algorithmically generated author record based on publicly available information.

Sallolo Suluh has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ANALISA KARAKTERISASI KOMPOSISI CAMPURAN TANAH LIAT, ALUMINA, KANJI SEBAGAI ALTERNATIF BAHAN ISOLATOR

    by Sallolo Suluh

    Abstrak Pemanfaatan tanah liat kebanyakan digunakan untuk membuat berbagai kerajinan seperti vas bunga, kendi tempayak dan juga dibuat menjadi gerabah, batu bata dan genteng. Tujuan dari peneltian ini mengetahuai pengaruh komposisi campuran tanah liat, alumina dan tepung kanji terhadap porositas, densitas dan kadar air silinder isolator panas. Metode penelitian yang dilakukan adalah metode eksperimental dengan membuat material dari campuran tanah liat, alumina, kanji sebagai alaternatif bahan isolator. Serangkaian proses dilakukan dalam pembuatan material. Selanjutnya setelah material berhasil dibentuk, dilakukan pengujian kadar air, porositas, dan densitas terhadap material. Hasil penelitian menunjukkan bahwa campuran tanah liat, alumina dan tepung kanji yang terbaik didapatkan pada sampel E dengan komposisi 20% tanah liat, 60% alumina, dan 20% tepung kanji. Kadar air, porositas, dan densitas pada campuran tersebut adalah sebesar 9,49%; 26,97%; dan 1.514,80 . Kata kunci : alumina, isolator, komposisi, porositas, dan tepung kanji

  • Open Access

    The Effect of Clay, Alumina, and Starch Composition on The Characteristics of Thermal Insulation Cylinders

    by Sallolo Suluh, Frans Robert Bethony, Christof Geraldi Simon, Ferayanti Boas Gallaran, Paulus Aket, Enos Pasampa

    Efficient thermal insulation materials are crucial in improving performance, minimizing energy consumption, and maintaining safety in various industrial applications. This study examines the impact of multiple combinations of clay, alumina, and starch on the properties of thermal insulation cylinders. Five different composite samples were prepared by adjusting the percentages of clay and alumina while maintaining a consistent starch content. The samples were subjected to comprehensive tests to assess their water content, density, and porosity. Based on the findings, it was observed that as the alumina content increased, the water content and density of the composite materials decreased while their porosity increased. The sample labeled C6-A2 had the highest water content (9.19%) and density (1,087.04 kg/m³), while the sample labeled C2-A6 had the lowest water content (8.69%) and density (1,069.93 kg/m³). The range of porosity values observed was between 25.67% and 26.60%. It was observed that an increase in alumina content resulted in a corresponding increase in porosity. The findings indicate that the larger particle size and lower cohesion of alumina result in a more porous microstructure, affecting the material's overall properties. This study offers valuable insights into the composition optimization of clay, alumina, and starch to create customized composite materials suitable for various industrial applications. It focuses on achieving a delicate balance between water resistance, structural integrity, and thermal insulation

  • Open Access

    PENDAMPINGAN PEMBUATAN PUPUK ORGANIK CAIR DARI BONGGOL PISANG DAN AIR LERI KEPADA MASYARAKAT DI LEMBANG RANTEDADA

    by Sallolo Suluh, Widi Kurniawan, Damaris Arrang, Riki Masero, Frans Dedi Dena, Frans Robert Bethony, Chendri Johan, Christof Geraldi Simon, Dennis Lorenzo, Petrus Sampe Lawang, et al.

    Organic farming is increasingly in demand because it prioritizes sustainability and environmentally friendly principles. Liquid organic fertilizer made from banana tubers and leri water is an alternative that is environmentally friendly and easy to produce. However, knowledge and skills in making liquid organic fertilizer still need to be improved among the community, especially in areas such as Lembang Rantedada. This study was carried out through direct assistance and training activities for the community in Lembang Rantedada with a practical and participatory approach, involving the community in every stage of fertilizer production, from raw material preparation to the fermentation and storage process. The result of this mentoring activity is an increase in community knowledge and skills in making liquid organic fertilizer. Communities can use locally available banana stems and water to produce organic fertilizer that is beneficial for their agriculture. Apart from that, awareness is also created about the importance of using organic fertilizer in supporting sustainable agriculture and environmental preservation. Assistance in making liquid organic fertilizer from banana stems and leri water to the community in Lembang Rantedada is an effective step in increasing the independence and sustainability of local agriculture. By increasing knowledge and skills, communities can utilize local resources more optimally and support environmentally friendly agricultural practices

  • Open Access

    The Influence Of Variations In Soaking Time Of Rice Husk Charcoal Briquettes On Its Performance

    by S Suluh, Frans Robert Bethoni, Risa Lazarus, Christof Geraldi Simon, Chendri Johan, Lery Afriany Salo

    Rice husk is one of the biomass wastes from agriculture which is used as an alternative energy source in the form of briquettes. These briquettes are used as fuel in aluminum stoves. This study aims to analyze the performance of rice husk charcoal briquettes at various times of immersion in kerosene. The research method was carried out using experimental methods by testing rice husk charcoal briquettes on five variations in soaking time, namely 0 minutes, 5 minutes, 15 minutes, and 20 minutes, after testing on an aluminum stove alternately with the process of boiling water. The results showed that the highest flame temperature, ignition duration, ability to boil water, and highest thermal efficiency were 798% at 120 minutes, 24 liters, and 69.88% at 20 minutes of immersion.

  • Open Access

    Enhancing vehicle wheel suspension test equipment through Taguchi method for optimization

    by Christof Geraldi Simon, Festo Andre Hardinsi, Sallolo Suluh, Formanto Paliling, Rigel Sampelolo, Agus Widyianto

    The study demonstrates a significant advancement in vehicle suspension testing by utilizing the Taguchi method for optimization. The suspension system determines a vehicle’s performance, directly affecting ride comfort, handling, and safety. The research presented in this study highlights a potentially effective method for enhancing suspension testing. The research systematically investigates the complex network of factors influencing suspension behavior using the Taguchi method, a robust optimization technique. The analysis includes examining road surface conditions, passenger weight variations, and tire pressure fluctuations. The objective is to design a suspension system that provides both comfort and stability without making any concessions, regardless of the obstacles encountered on the road. The car utilized for this research is an Altis sedan equipped with tires with a 205/55 R16 profile. The study’s findings indicate that factor A, which represents embankment height, significantly impacts 56 % of road irregularity management and the maintenance of a stable driving experience. The dynamic load factor (Factor D) contributes significantly to the vehicle’s overall stability and ride quality, accounting for 43 % in different scenarios. Based on the given framework, it can be observed that the variables B (tire pressure) and C (passenger weight) significantly influence suspension vibration, resulting in a reduction of below 0.1 %. While the research results presented here only cover a subset of automobiles, the methodology employed can be used to deal with similar problems in other vehicles.


  • Open Access

    Evaluation of a biomass combustion furnace using different kinds of combustion chamber casing materials

    by Sallolo Suluh, Dennis Lorenza, Rigel Sampelolo, Gan Pongdatu, Dina Ramba, Agus Widyianto

    This research systematically evaluates a biomass combustion furnace, focusing on the influence of varying combustion chamber casing materials. The study employs controlled laboratory experiments to investigate the impact of different casing materials on combustion performance, thermal efficiency, and practical applications such as water boiling capacity. The research uses distinct materials, including clay, steel, and aluminum, for combustion chamber casings while maintaining consistent dimensions. The central experimental apparatus, an aluminum stove, was meticulously crafted, adhering to precise measurements. Coconut shell briquettes served as the primary fuel source for this investigation. The results reveal intriguing dynamics in combustion behavior. Notably, the choice of combustion chamber casing material significantly affects fire temperature, sleeve wall temperature, thermal efficiency, and the ability to boil water. Clay emerges as a standout performer, achieving high thermal efficiency (56.8 %), substantial water boiling capacity (25 liters), and efficient fuel consumption (1.28 kg of burnt briquettes). However, steel casing materials excel in generating the highest fire temperatures (up to 557 °C), underscoring their exceptional heat-conducting properties. Aluminum has fast temperature responses but may not retain heat like clay. The findings help optimize biomass combustion furnaces and associated applications. Material selection is crucial to attaining combustion goals like efficiency, temperature generation, or practical heat. These discoveries could lead to more efficient and ecologically friendly biomass combustion systems for sustainable energy and resource use


  • Open Access

    The Performance of Clay-based Biomass Briquette Stove with Three Geometry Shape Variations

    by Sallolo Suluh, Mohammad Yusuf, Muhammad Irsyad Fauzi, Novriany Amaliyah, Zuryati Djafar, Wahyu Haryadi Piarah

    Biomass briquette stove is a cooking tool that is still widely used by the people of the interior of South Sulawesi. Even in urban areas, it is not uncommon to find their use because of the ease of obtaining briquettes and its relatively good efficiency. This study aims to determine the best performance of a biomass stove from three types of clay material stove shapes in different configurations of geothermal variations. The three variations of the geometric shape of the stove are cylindrical, rectangular and hexagonal using biomass material from coconut shell charcoal in the shape of a honeycomb with an inner diameter of 15 mm and an outer diameter of 65 mm and a height of 45 mm. The uniqueness of this stove is the addition of a sleeve diameter of 180mm in the stove's combustion chamber as heat insulation so that the combustion process in the combustion chamber can be more perfect. The test results show that the presence of a flat surface on the stove wall will accelerate heat loss compared to the cylindrical surface. This is in line with the results which show that the highest rate of heat loss occurs in a rectangular shape, then a six-square shape, and the last is a cylindrical shape. Furthermore, it can be concluded that the cylindrical stove is the superior of the two in terms of flame temperature, ability to boil water and thermal efficiency of 798°C, 30 liters and 73.66%, respectively.


  • Open Access

    ANALISA PEMANFAATAN CAMPURAN BRIKET ARANG SEKAM PADI DENGAN CANGKANG KEMIRI SEBAGAI BAHAN BAKAR ALTERNATIF

    by Sallolo Suluh

    This research aims to determine; (1) The effect of the mixture of rice husk charcoal briquettes with hazelnut shell charcoal on boiling time, (2) The effect of the mixture of rice husk charcoal briquettes with hazelnut shell charcoal on the net power (Pout) (3) The effect of the mixture of rice husk charcoal briquettes with hazelnut shell charcoal on the loss of power in the furnace, (4) The effect of a mixture of rice husk charcoal briquettes with hazelnut shell charcoal on the resulting thermal efficiency. The research method used is an experimental method using rice husk charcoal with candlenut shell charcoal for testing on the stove. The results showed that the most superior mixture of rice husk charcoal briquettes with hazelnut shells was found in B3 briquettes (a mixture of 40% rice husk charcoal and 40% hazelnut shells) resulted in boiling time in the 55th minute, clean power 0,24 kW, loss of power 0,098 KW and thermal efficiency of 40.45%.


  • Open Access

    Effect of variations in the composition of additives on the performance of petung bamboo charcoal briquettes

    by Sallolo Suluh, Yafet Bontong, Anastasia Baan, Roni Labiran, Mersilina L. Patintingan, Silka

    The use of petung bamboo as a raw material for making charcoal briquettes will reduce dependence on fossil fuel energy which is already depleting. The abundant condition of petung bamboo waste in Toraja comes from the rest of the party activities of tuka signs and solo signs that are useful for making houses / loud places for relatives and guests to sit. This research was conducted by making charcoal briquettes from petung bamboo waste by varying the composition of the sago adhesive and clay as an alternative energy source. The purpose of this research is to determine the optimal thermal efficiency. The method to be used is an experimental method using petung bamboo waste as an alternative fuel on the stove with a water boiling process. The results showed that B2 briquettes (a mixture of 175 grams of petung bamboo charcoal and 25 grams of clay reinforcement) were the most superior in terms of boiling 21 liters of water and produced a thermal efficiency of 70.39%.

  • Open Access

    An Analysis of the Use of Local Bamboo as an Alternative Energy Source

    by Sallolo Suluh, Petrus Sampelawang, Normalia Sirande

    The use of local bamboo biomass bricket is very effective and eficient to be used as an alternative fuel. This reasearch aimed to (1) evaluate the proximation and calor value of three types of local bamboo based on the variasi jenis bambu, (2) to determine therma efficiency of the bamboo charcoal bricket. This research applied experimental method by using three types of material through efficiency evaluation on the bricket stove. The result of experiment on the comparison of calor value was found that bricket type B1 (Petung Bamboo) has the highest calor value as 5176,333 cal/gram, B2 (Wulung Bamboo) has the value calor as 4873 cal/gram, and B3 (Apus Bamboo) has value of the calor as 5025 cal/gram. Meamwhile, the result of burning experiment on the stove showed that B1 (Petung Bamboo) is the best in terms of the ability to boil water for five (5) times by thermal efficiency l in the amount of 56,91%.