Alireza Mojtahedi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alireza Mojtahedi has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Ali Lotfollahi-Yaghin
University of Tabriz
7 shared publications Mohammad Ali Lotfollahi-Yaghin
Department of Water and Envronmental Engineering, University of Tabriz, Tabriz, Iran
5 shared publicationsAbdolmajid Mohammadian
Faculty of Civil Engineering, University of Ottawa, Ottawa, Canada
3 shared publications- Hamid Hokmabady
Department of Water Resources Engineering, University of Tabriz, Tabriz, Iran
3 shared publications Mehran Dadashzadeh
3 shared publications- Mehran Dadashzadeh
Department of Water and Environmental Engineering, Faculty of Civil Engineering, University of Tabriz, Tabriz, Iran
3 shared publications
Latest Publications
- Open Access
- 6 September 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Integrated approach for dynamic characterization of a ship hull model using hybrid RDT–machine learning
- 6 September 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessIntegrated approach for dynamic characterization of a ship hull model using hybrid RDT–machine learning
- Open Access
- 31 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Bayesian value-of-information optimization for cost–risk–reliability-based ranking of offshore platforms
- 31 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Open AccessBayesian value-of-information optimization for cost–risk–reliability-based ranking of offshore platforms
- Open Access
- 28 February 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Credibility assessment of a Lagrangian-based model for long-term simulation of oil spill dynamics: A case study on Sanchi incident
- 28 February 2026
- Published by Elsevier in Results in Engineering
- Vol. 30
Open AccessCredibility assessment of a Lagrangian-based model for long-term simulation of oil spill dynamics: A case study on Sanchi incident
- Open Access
- 24 February 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
A robust strategy for FE model updating of composite panels using a combined ANN-SMA surrogate-assisted optimization framework
This study presents a novel hybrid surrogate-assisted optimization framework for finite element (FE) model updating of composite panels. Accurately updated FE models offer a reliable basis for design and analysis of modern structural systems and are widely employed in various industrial and engineering applications. However, model updating of composite structures remains a significant challenge due to their inherent anisotropy and complex mechanical behavior, which often limit the effectiveness of conventional updating techniques. To address these limitations, a hybrid framework is introduced for the first time, combining surrogate modeling with the Slime Mould Algorithm (SMA), a recently developed metaheuristic optimizer. For the proposed model updating strategy, a baseline FE model was initially developed, and an objective function was defined to quantify discrepancies between numerical predictions and experimental measurements. The baseline model generated training data for surrogate models constructed using Response Surface Methodology (RSM), Kriging (KRG), and Artificial Neural Networks (ANN). Among these, the ANN-based surrogates achieved superior predictive accuracy and were selected for the optimization phase. Sensitivity analysis identified the most influential parameters for model updating. Optimization was then carried out to minimize the objective function using the SMA. The resulting ANN–SMA framework substantially reduced discrepancies between experimental and numerical modal responses, yielding a high-fidelity FE model. Comparative assessments against established metaheuristic algorithms, including Particle Swarm Optimization (PSO) and Genetic Algorithm (GA), both integrated with ANN surrogates, revealed that the ANN-SMA framework exhibited enhanced convergence stability and computational efficiency, with reductions in runtime of approximately 7% and 30% relative to ANN-PSO and ANN-GA, respectively. These findings confirm that the proposed ANN–SMA hybrid framework provides a robust, efficient, and reliable tool for precise FE model updating of composite structures, with significant potential for broader applications in structural dynamics and structural health monitoring (SHM).
- 24 February 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Open AccessA robust strategy for FE model updating of composite panels using a combined ANN-SMA surrogate-assisted optimization framework
This study presents a novel hybrid surrogate-assisted optimization framework for finite element (FE) model updating of composite panels. Accurately updated FE models offer a reliable basis for design and analysis of modern structural systems and are widely employed in various industrial and engineering applications. However, model updating of composite structures remains a significant challenge due to their inherent anisotropy and complex mechanical behavior, which often limit the effectiveness of conventional updating techniques. To address these limitations, a hybrid framework is introduced for the first time, combining surrogate modeling with the Slime Mould Algorithm (SMA), a recently developed metaheuristic optimizer. For the proposed model updating strategy, a baseline FE model was initially developed, and an objective function was defined to quantify discrepancies between numerical predictions and experimental measurements. The baseline model generated training data for surrogate models constructed using Response Surface Methodology (RSM), Kriging (KRG), and Artificial Neural Networks (ANN). Among these, the ANN-based surrogates achieved superior predictive accuracy and were selected for the optimization phase. Sensitivity analysis identified the most influential parameters for model updating. Optimization was then carried out to minimize the objective function using the SMA. The resulting ANN–SMA framework substantially reduced discrepancies between experimental and numerical modal responses, yielding a high-fidelity FE model. Comparative assessments against established metaheuristic algorithms, including Particle Swarm Optimization (PSO) and Genetic Algorithm (GA), both integrated with ANN surrogates, revealed that the ANN-SMA framework exhibited enhanced convergence stability and computational efficiency, with reductions in runtime of approximately 7% and 30% relative to ANN-PSO and ANN-GA, respectively. These findings confirm that the proposed ANN–SMA hybrid framework provides a robust, efficient, and reliable tool for precise FE model updating of composite structures, with significant potential for broader applications in structural dynamics and structural health monitoring (SHM).
- Open Access
- 18 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
A novel FIO-based hybrid piezoelectric–electromagnetic energy harvester coupled with tandem cylinders
Flow-induced oscillations (FIO) are energy-rich hydrodynamic phenomena that can be exploited to harvest renewable energy from ocean and river currents. The hydrodynamics of tandem cylinders have recently gained attention in the literature, and this study investigates a hybrid energy harvesting system based on tandem cylinder configurations. The upstream–downstream wake interference is modeled through coupled van der Pol and wake oscillators, with particular emphasis on accurately capturing both vortex-induced vibration and galloping mechanisms. Three configurations, including piezoelectric (PZT-H), electromagnetic (EMT-H), and a new proposed hybrid piezoelectric–electromagnetic coupled with tandem cylinders (HEPT-H), are analyzed under varying spacing ratios and reduced velocities. Findings highlight that galloping is the dominant instability driving large-amplitude responses, and its proper modeling is critical for predicting and maximizing harvested energy. The proposed HEPT-H system takes advantage of this mechanism, nearly doubling the harvested power and improving efficiency by about 20% compared with single-harvester systems. A multi-criteria decision-making method (TOPSIS) was employed to rank the harvesters under different cylinder spacing configurations according to their relative closeness to the ideal solution. The HEPT-H system with a center-to-center cylinder spacing of four diameters indicated the best performance, achieving a maximum output of 0.071 W and a peak efficiency of 69.78%. This research emphasizes the significant potential of HEPT-H systems in FIO and demonstrates that tandem configurations outperform isolated cylinders, underscoring their effectiveness for advancing sustainable hydrokinetic energy applications.
- 18 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 16  (1)
Open AccessA novel FIO-based hybrid piezoelectric–electromagnetic energy harvester coupled with tandem cylinders
Flow-induced oscillations (FIO) are energy-rich hydrodynamic phenomena that can be exploited to harvest renewable energy from ocean and river currents. The hydrodynamics of tandem cylinders have recently gained attention in the literature, and this study investigates a hybrid energy harvesting system based on tandem cylinder configurations. The upstream–downstream wake interference is modeled through coupled van der Pol and wake oscillators, with particular emphasis on accurately capturing both vortex-induced vibration and galloping mechanisms. Three configurations, including piezoelectric (PZT-H), electromagnetic (EMT-H), and a new proposed hybrid piezoelectric–electromagnetic coupled with tandem cylinders (HEPT-H), are analyzed under varying spacing ratios and reduced velocities. Findings highlight that galloping is the dominant instability driving large-amplitude responses, and its proper modeling is critical for predicting and maximizing harvested energy. The proposed HEPT-H system takes advantage of this mechanism, nearly doubling the harvested power and improving efficiency by about 20% compared with single-harvester systems. A multi-criteria decision-making method (TOPSIS) was employed to rank the harvesters under different cylinder spacing configurations according to their relative closeness to the ideal solution. The HEPT-H system with a center-to-center cylinder spacing of four diameters indicated the best performance, achieving a maximum output of 0.071 W and a peak efficiency of 69.78%. This research emphasizes the significant potential of HEPT-H systems in FIO and demonstrates that tandem configurations outperform isolated cylinders, underscoring their effectiveness for advancing sustainable hydrokinetic energy applications.
- 21 November 2025
- Published by Elsevier in Ocean Engineering
- Vol. 343
Metaheuristic-based performance optimization in vortex-induced vibration clean energy harvesting
- 21 November 2025
- Published by Elsevier in Ocean Engineering
- Vol. 343
Metaheuristic-based performance optimization in vortex-induced vibration clean energy harvesting
- 15 October 2025
- Published by Elsevier in Measurement
- Vol. 258
Integrating soft computing and remote sensing for accurate bathymetric mapping in shallow saline lakes: a case study of Lake Urmia
- 15 October 2025
- Published by Elsevier in Measurement
- Vol. 258
Integrating soft computing and remote sensing for accurate bathymetric mapping in shallow saline lakes: a case study of Lake Urmia
- 8 September 2025
- Published by Elsevier in Ocean Engineering
- Vol. 341
Geometrical effects on the degree of bending (DoB) in two-planar tubular DY-joints of jacket substructure in offshore wind turbines
- 8 September 2025
- Published by Elsevier in Ocean Engineering
- Vol. 341
Geometrical effects on the degree of bending (DoB) in two-planar tubular DY-joints of jacket substructure in offshore wind turbines
- 18 January 2025
- Published by Elsevier in Ocean Engineering
- Vol. 321
A review of two-degree-of-freedom vortex-induced vibrations with hydrokinetic energy harvesting applications
- 18 January 2025
- Published by Elsevier in Ocean Engineering
- Vol. 321
A review of two-degree-of-freedom vortex-induced vibrations with hydrokinetic energy harvesting applications
- 22 August 2024
- Published by Elsevier in Ocean Engineering
- Vol. 311
Developing a predictive method based on the vibration behavior of a naval ship hull model using hybrid fuzzy meta-heuristic algorithms
- 22 August 2024
- Published by Elsevier in Ocean Engineering
- Vol. 311
Developing a predictive method based on the vibration behavior of a naval ship hull model using hybrid fuzzy meta-heuristic algorithms