Deniz Mostarac
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Deniz Mostarac has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Sofia Sergeevna Kantorovich
University of Vienna
6 shared publications - Pedro Sánchez
University of Vienna
4 shared publications - Alessandro Paciaroni
Department of Physics and Geology, University of Perugia, Via A. Pascoli, 06123 Perugia, Italy
3 shared publications - Cristiano De Michele
University of Rome La Sapienza
3 shared publications - Lucia Comez
CNR-IOM, Department of Physics and Geology, University of Perugia, Via Alessandro Pascoli, 06123 Perugia, Italy
3 shared publications Mattia Trapella
University of Perugia
3 shared publications
Latest Publications
- Open Access
- 29 August 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 66 (17) , 11246-11258
Rational Polyligand Design for G-Quadruplex Multimer Stabilization
G-quadruplexes (G4) are noncanonical nucleic acid secondary structures formed by guanine-rich sequences that can form higher-order multimers under appropriate conditions and represent attractive targets for multivalent molecular recognition. Here, we propose a rational ligand design strategy based on multivalency, in which ligand molecules are covalently linked into polymer-like macromolecules. Using coarse-grained molecular dynamics, we show that these “polyligands” intercalate G4 multimers more efficiently than their monomeric counterparts, achieving strong stabilization through cooperative effects, even when individual ligands exhibit low intrinsic binding affinity. Polyligand intercalation induces structural changes in G4 multimers, modifying their size and stiffness. Using a quantitative polymer theory framework, we connect these structural changes with the thermal stabilization of G4 multimers. Polyligands represent a general design principle for G4-targeting molecular stabilizers, offering enhanced G4 stabilization via programmable linker length and backbone rigidity.
- 29 August 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Information and Modeling
- Vol. 66 (17) , 11246-11258
Open AccessRational Polyligand Design for G-Quadruplex Multimer Stabilization
G-quadruplexes (G4) are noncanonical nucleic acid secondary structures formed by guanine-rich sequences that can form higher-order multimers under appropriate conditions and represent attractive targets for multivalent molecular recognition. Here, we propose a rational ligand design strategy based on multivalency, in which ligand molecules are covalently linked into polymer-like macromolecules. Using coarse-grained molecular dynamics, we show that these “polyligands” intercalate G4 multimers more efficiently than their monomeric counterparts, achieving strong stabilization through cooperative effects, even when individual ligands exhibit low intrinsic binding affinity. Polyligand intercalation induces structural changes in G4 multimers, modifying their size and stiffness. Using a quantitative polymer theory framework, we connect these structural changes with the thermal stabilization of G4 multimers. Polyligands represent a general design principle for G4-targeting molecular stabilizers, offering enhanced G4 stabilization via programmable linker length and backbone rigidity.
- Open Access
- 6 March 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (22) , 11724-11738
Hard meets soft: tuning binary ferrofluids
We study binary ferrofluids composed of multicore “nanoflowers” of magnetically hard CoFe2O4 and magnetically soft MnFe2O4, as a way to optimise heat dissipation while suppressing aggregation–properties essential for biomedical applications. Bulk magnetometry and molecular dynamics simulations were combined to elucidate their behaviour. Experiments show wasp-waisted hysteresis, composition-dependent coercivity, and strong protocol dependence (field cooling). Simulations reproduce these trends and reveal the underlying structure–property coupling: (i) in an applied magnetic field, CoFe2O4 forms chains that dominate collective switching; (ii) adding MnFe2O4 “poisons” these chains—shortening and de-branching clusters—thereby lowering coercivity and loop area relative to a weighted superposition of the individual component responses without interactions; (iii) dipolar coupling reciprocally hardens the magnetically soft phase and softens the magnetically hard phase even without large-scale aggregation; and (iv) at higher total volume fraction (ϕ = 0.1) magnetically soft particles still suppress chain growth, reducing mean cluster size by up to an order of magnitude while keeping heating-relevant hysteresis close to Stoner–Wohlfarth expectations. These results establish composition-controlled microstructure as a means to decouple thermal output from aggregation: CoFe2O4 : MnFe2O4 mixtures can be tuned to enhance loss mechanisms while mitigating aggregation, offering a route to binary ferrofluids optimized for magnetic hyperthermia and drug delivery.
- 6 March 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (22) , 11724-11738
Open AccessHard meets soft: tuning binary ferrofluids
We study binary ferrofluids composed of multicore “nanoflowers” of magnetically hard CoFe2O4 and magnetically soft MnFe2O4, as a way to optimise heat dissipation while suppressing aggregation–properties essential for biomedical applications. Bulk magnetometry and molecular dynamics simulations were combined to elucidate their behaviour. Experiments show wasp-waisted hysteresis, composition-dependent coercivity, and strong protocol dependence (field cooling). Simulations reproduce these trends and reveal the underlying structure–property coupling: (i) in an applied magnetic field, CoFe2O4 forms chains that dominate collective switching; (ii) adding MnFe2O4 “poisons” these chains—shortening and de-branching clusters—thereby lowering coercivity and loop area relative to a weighted superposition of the individual component responses without interactions; (iii) dipolar coupling reciprocally hardens the magnetically soft phase and softens the magnetically hard phase even without large-scale aggregation; and (iv) at higher total volume fraction (ϕ = 0.1) magnetically soft particles still suppress chain growth, reducing mean cluster size by up to an order of magnitude while keeping heating-relevant hysteresis close to Stoner–Wohlfarth expectations. These results establish composition-controlled microstructure as a means to decouple thermal output from aggregation: CoFe2O4 : MnFe2O4 mixtures can be tuned to enhance loss mechanisms while mitigating aggregation, offering a route to binary ferrofluids optimized for magnetic hyperthermia and drug delivery.
- Open Access
- 23 May 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (22) , 5435-5440
Destabilizing Interactions in Human Telomeric G-Quadruplex Multimers
G-Quadruplexes are secondary structures that may form in G-rich nucleic acid sequences. The extended overhang at the ends of human telomeres has the potential to form multiple G-Quadruplexes that are crucial in regulating key biological processes. Here, we employ small-angle X-ray scattering-guided extremely coarse-grained simulations to provide a picture of the arrangement of G-Quadruplexes in long telomeric sequences. We observe significant destabilizing interactions between G-Quadruplexes, thus making the stacked conformation less prevalent. A helix-coil model is proposed to analytically describe the stacking-unstacking equilibrium within G-Quadruplex multimers and predict the occurrence of stacked and unstacked G-Quadruplex multiplets in arbitrarily long sequences.
- 23 May 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (22) , 5435-5440
Open AccessDestabilizing Interactions in Human Telomeric G-Quadruplex Multimers
G-Quadruplexes are secondary structures that may form in G-rich nucleic acid sequences. The extended overhang at the ends of human telomeres has the potential to form multiple G-Quadruplexes that are crucial in regulating key biological processes. Here, we employ small-angle X-ray scattering-guided extremely coarse-grained simulations to provide a picture of the arrangement of G-Quadruplexes in long telomeric sequences. We observe significant destabilizing interactions between G-Quadruplexes, thus making the stacked conformation less prevalent. A helix-coil model is proposed to analytically describe the stacking-unstacking equilibrium within G-Quadruplex multimers and predict the occurrence of stacked and unstacked G-Quadruplex multiplets in arbitrarily long sequences.
- Open Access
- 8 April 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (5) , 3128-3138
Polymeric Properties of Telomeric G-Quadruplex Multimers: Effects of Chemically Inert Crowders
G-quadruplexes are noncanonical DNA structures rather ubiquitous in the human genome, which are thought to play a crucial role in the development of the majority of cancers. Here, we present a novel coarse-grained approach in modeling G-quadruplexes that accounts for their structural flexibility. We apply it to study the polymeric properties of G-quadruplex multimers, with and without crowder molecules, to mimic in vivo conditions. We find that, contrary to some suggestions found in the literature, long G-quadruplex multimers are rather flexible polymeric macromolecules, with a local persistence length comparable to monomer size, exhibiting a chain stiffness variation profile consistent with a real polymer in good solvent. Moreover, in a crowded environment (up to 10% volume fraction), we report that G-quadruplex multimers exhibit an increased propensity for coiling, with a corresponding decrease in the measured chain stiffness.
- 8 April 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (5) , 3128-3138
Open AccessPolymeric Properties of Telomeric G-Quadruplex Multimers: Effects of Chemically Inert Crowders
G-quadruplexes are noncanonical DNA structures rather ubiquitous in the human genome, which are thought to play a crucial role in the development of the majority of cancers. Here, we present a novel coarse-grained approach in modeling G-quadruplexes that accounts for their structural flexibility. We apply it to study the polymeric properties of G-quadruplex multimers, with and without crowder molecules, to mimic in vivo conditions. We find that, contrary to some suggestions found in the literature, long G-quadruplex multimers are rather flexible polymeric macromolecules, with a local persistence length comparable to monomer size, exhibiting a chain stiffness variation profile consistent with a real polymer in good solvent. Moreover, in a crowded environment (up to 10% volume fraction), we report that G-quadruplex multimers exhibit an increased propensity for coiling, with a corresponding decrease in the measured chain stiffness.
- 27 January 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (1)
Thermal Stoner-Wohlfarth model for magnetodynamics of single domain nanoparticles: Implementation and validation
- 27 January 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (1)
Thermal Stoner-Wohlfarth model for magnetodynamics of single domain nanoparticles: Implementation and validation
- Open Access
- 26 July 2022
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 55 (15) , 6462-6473
Rheology of a Nanopolymer Synthesized through Directional Assembly of DNA Nanochambers, for Magnetic Applications
We present a numerical study of the effects of monomer shape and magnetic nature of colloids on the behavior of a single magnetic filament subjected to the simultaneous action of shear flow and a stationary external magnetic field perpendicular to the flow. We find that based on the magnetic nature of monomers, magnetic filaments exhibit a completely different phenomenology. Applying an external magnetic field strongly inhibits tumbling only for filaments with ferromagnetic monomers. Filament orientation with respect to the flow direction is in this case independent of monomer shape. In contrast, reorientational dynamics in filaments with superparamagnetic monomers are not inhibited by applied magnetic fields, but enhanced. We find that the filaments with spherical, superparamagnetic monomers, depending on the flow and external magnetic field strength, assume semipersistent, collapsed, coiled conformations, and their characteristic time of tumbling is a function of field strength. However, external magnetic fields do not affect the characteristic time of tumbling for filaments with cubic, superparamagnetic monomers, but increase how often tumbling occurs.
- 26 July 2022
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 55 (15) , 6462-6473
Open AccessRheology of a Nanopolymer Synthesized through Directional Assembly of DNA Nanochambers, for Magnetic Applications
We present a numerical study of the effects of monomer shape and magnetic nature of colloids on the behavior of a single magnetic filament subjected to the simultaneous action of shear flow and a stationary external magnetic field perpendicular to the flow. We find that based on the magnetic nature of monomers, magnetic filaments exhibit a completely different phenomenology. Applying an external magnetic field strongly inhibits tumbling only for filaments with ferromagnetic monomers. Filament orientation with respect to the flow direction is in this case independent of monomer shape. In contrast, reorientational dynamics in filaments with superparamagnetic monomers are not inhibited by applied magnetic fields, but enhanced. We find that the filaments with spherical, superparamagnetic monomers, depending on the flow and external magnetic field strength, assume semipersistent, collapsed, coiled conformations, and their characteristic time of tumbling is a function of field strength. However, external magnetic fields do not affect the characteristic time of tumbling for filaments with cubic, superparamagnetic monomers, but increase how often tumbling occurs.
- Open Access
- 16 June 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (31) , 11139-11151
Nanopolymers for magnetic applications: how to choose the architecture?
Using simulations, we compare nanopolymers with different architectures and/or magnetic nature of monomers, to reveal that nanopolymers based on DNA nanochambers are a compelling, finely tuneable platform for creating magneto-responsive materials.
- 16 June 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (31) , 11139-11151
Open AccessNanopolymers for magnetic applications: how to choose the architecture?
Using simulations, we compare nanopolymers with different architectures and/or magnetic nature of monomers, to reveal that nanopolymers based on DNA nanochambers are a compelling, finely tuneable platform for creating magneto-responsive materials.
- Open Access
- 11 June 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (26) , 14298
Correction: Characterisation of the magnetic response of nanoscale magnetic filaments in applied fields
Correction for ‘Characterisation of the magnetic response of nanoscale magnetic filaments in applied fields’ by Deniz Mostarac et al., Nanoscale, 2020, DOI: 10.1039/d0nr01646b.
- 11 June 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (26) , 14298
Open AccessCorrection: Characterisation of the magnetic response of nanoscale magnetic filaments in applied fields
Correction for ‘Characterisation of the magnetic response of nanoscale magnetic filaments in applied fields’ by Deniz Mostarac et al., Nanoscale, 2020, DOI: 10.1039/d0nr01646b.
- Open Access
- 14 May 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (26) , 13933-13947
Characterisation of the magnetic response of nanoscale magnetic filaments in applied fields
Magnetic filaments are to be designed by selecting crosslinking mechanisms rather than by choice of ferro- or super-paramagnetic monomers.
- 14 May 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (26) , 13933-13947
Open AccessCharacterisation of the magnetic response of nanoscale magnetic filaments in applied fields
Magnetic filaments are to be designed by selecting crosslinking mechanisms rather than by choice of ferro- or super-paramagnetic monomers.
- Open Access
The influence of crosslinkers and magnetic particle distribution along the filament backbone on the magnetic properties of supracolloidal linear polymer-like chains
Diverse polymer crosslinking techniques allow the synthesis of linear polymer-like structures whose monomers are colloidal particles. In the case where all or part of these colloidal particles are magnetic, one can control the behaviour of these supracolloidal polymers, known as magnetic filaments (MFs), by applied magnetic fields. However, the response of MFs strongly depends on the crosslinking procedure. In the present study, we employ Langevin dynamics simulations to investigate the influence of the type of crosslinking and the distribution of magnetic particles within MFs on their response to an external magnetic field. We found that if the rotation of the dipole moment of particles is not coupled to the backbone of the filament, the impact of the magnetic content is strongly decreased.
Open AccessThe influence of crosslinkers and magnetic particle distribution along the filament backbone on the magnetic properties of supracolloidal linear polymer-like chains
Diverse polymer crosslinking techniques allow the synthesis of linear polymer-like structures whose monomers are colloidal particles. In the case where all or part of these colloidal particles are magnetic, one can control the behaviour of these supracolloidal polymers, known as magnetic filaments (MFs), by applied magnetic fields. However, the response of MFs strongly depends on the crosslinking procedure. In the present study, we employ Langevin dynamics simulations to investigate the influence of the type of crosslinking and the distribution of magnetic particles within MFs on their response to an external magnetic field. We found that if the rotation of the dipole moment of particles is not coupled to the backbone of the filament, the impact of the magnetic content is strongly decreased.