Tomi Koskinen
Research Subjects
Tomi Koskinen has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Ilkka Tittonen
Aalto University
7 shared publications A. Lonnqvist
TKK Helsinki University of Technology, SMARAD/Radio Laboratory and MilliLab, P.O. Box 3000, FI-02015 TKK, Finland
3 shared publications- Antti. V. Raisanen
Department of Electronics and Nanoengineering, Aalto University, Espoo, Finland
3 shared publications - Harri Lipsanen
Department of Electronics and Nanoengineering, Aalto University, Espoo, Finland
3 shared publications J. Hakli
TKK, MilliLab, SMARAD Radio Laboratory, Helsinki University of Technology, P.O. Box 3000, 02015 TKK, Finland
3 shared publicationsJ. Mallat
TKK, MilliLab, SMARAD Radio Laboratory, Helsinki University of Technology, P.O. Box 3000, 02015 TKK, Finland
3 shared publications
Latest Publications
- Open Access
- 17 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (24) , 28736-28742
Thermoelectric and Optical Properties of Nanostructured p-Type CuI Thin Films Grown by Glancing Angle Deposition for Transparent Energy-Harvesting Applications
- 17 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 7 (24) , 28736-28742
Open AccessThermoelectric and Optical Properties of Nanostructured p-Type CuI Thin Films Grown by Glancing Angle Deposition for Transparent Energy-Harvesting Applications
- Open Access
- 11 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (4) , 2413-2419
Thermal Boundary Conductance of Direct Bonded Aluminum Nitride to Silicon Interfaces
Heat accumulation and self-heating have become key issues in microelectronics owing to the ever-decreasing size of components and the move toward three-dimensional structures. A significant challenge for solving these issues is thermally isolating materials, such as silicon dioxide (SiO2), which are commonly used in microelectronics. The silicon-on-insulator (SOI) structure is a great demonstrator of the limitations of SiO2 as the low thermal conductivity insulator prevents heat dissipation through the bottom of a device built on a SOI wafer. Replacing SiO2 with a more thermally conductive material could yield immediate results for improved heat dissipation of SOI structures. However, the introduction of alternate materials creates unknown interfaces, which can have a large impact on the overall thermal conductivity of the structure. In this work, we studied a direct bonded AlN-to-SOI wafer (AlN-SOI) by measuring the thermal conductivity of AlN and the thermal boundary conductance (TBC) of silicon (Si)/AlN and Si/SiO2/aluminum-oxygen-nitrogen (AlON)/AlN interfaces, the latter of which were formed during plasma-activated bonding. The results show that the AlN-SOI possesses superior thermal properties to those of a traditional SOI wafer, with the thermal conductivity of AlN measured at roughly 40 W m-1 K-1 and the TBC of both interfaces at roughly 100 MW m-2 K-1. These results show that AlN-SOI is a very promising structure for improving heat dissipation in future microelectronics.
- 11 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 6 (4) , 2413-2419
Open AccessThermal Boundary Conductance of Direct Bonded Aluminum Nitride to Silicon Interfaces
Heat accumulation and self-heating have become key issues in microelectronics owing to the ever-decreasing size of components and the move toward three-dimensional structures. A significant challenge for solving these issues is thermally isolating materials, such as silicon dioxide (SiO2), which are commonly used in microelectronics. The silicon-on-insulator (SOI) structure is a great demonstrator of the limitations of SiO2 as the low thermal conductivity insulator prevents heat dissipation through the bottom of a device built on a SOI wafer. Replacing SiO2 with a more thermally conductive material could yield immediate results for improved heat dissipation of SOI structures. However, the introduction of alternate materials creates unknown interfaces, which can have a large impact on the overall thermal conductivity of the structure. In this work, we studied a direct bonded AlN-to-SOI wafer (AlN-SOI) by measuring the thermal conductivity of AlN and the thermal boundary conductance (TBC) of silicon (Si)/AlN and Si/SiO2/aluminum-oxygen-nitrogen (AlON)/AlN interfaces, the latter of which were formed during plasma-activated bonding. The results show that the AlN-SOI possesses superior thermal properties to those of a traditional SOI wafer, with the thermal conductivity of AlN measured at roughly 40 W m-1 K-1 and the TBC of both interfaces at roughly 100 MW m-2 K-1. These results show that AlN-SOI is a very promising structure for improving heat dissipation in future microelectronics.
- Open Access
- 3 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (1)
Grass-like alumina enhances transmittance and electrical conductivity of atomic layer deposited Al-doped ZnO for thermoelectric and TCO applications
Transparent thermoelectric materials enable the integration of sensing and energy harvesting devices on various surfaces such as windows and user interfaces. A key constraint for device performance in such applications is the available surface area from which the thermoelectric power should be harvested without compromising the optical properties. Here, we demonstrate atomic layer deposition (ALD) of aluminum doped zinc oxide (AZO), the most prominent n-type thermoelectric material, on grass-like alumina (GLA), a high-performance, low-cost antireflective coating. The conformal nature of the ALD process enables the AZO growth to closely follow the topography of the underlying GLA film, therefore providing an increased effective surface area compared to a reference AZO film grown directly on plain glass. The films grown on GLA show an improved electrical conductivity attributed to additional doping by the GLA. The effect is pronounced at lower AZO thicknesses, resulting in a 228% increase in the electrical conductivity and an 80% increase in the thermoelectric power factor of 32 nm thick films. Moreover, the GLA-AZO films partly inherit the antireflective behavior of the GLA film, thus showing improved optical transparency compared to the reference AZO film on glass. Our results promote transparent thermoelectric devices with improved transparency and thermoelectric performance.
- 3 July 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (1)
Open AccessGrass-like alumina enhances transmittance and electrical conductivity of atomic layer deposited Al-doped ZnO for thermoelectric and TCO applications
Transparent thermoelectric materials enable the integration of sensing and energy harvesting devices on various surfaces such as windows and user interfaces. A key constraint for device performance in such applications is the available surface area from which the thermoelectric power should be harvested without compromising the optical properties. Here, we demonstrate atomic layer deposition (ALD) of aluminum doped zinc oxide (AZO), the most prominent n-type thermoelectric material, on grass-like alumina (GLA), a high-performance, low-cost antireflective coating. The conformal nature of the ALD process enables the AZO growth to closely follow the topography of the underlying GLA film, therefore providing an increased effective surface area compared to a reference AZO film grown directly on plain glass. The films grown on GLA show an improved electrical conductivity attributed to additional doping by the GLA. The effect is pronounced at lower AZO thicknesses, resulting in a 228% increase in the electrical conductivity and an 80% increase in the thermoelectric power factor of 32 nm thick films. Moreover, the GLA-AZO films partly inherit the antireflective behavior of the GLA film, thus showing improved optical transparency compared to the reference AZO film on glass. Our results promote transparent thermoelectric devices with improved transparency and thermoelectric performance.
- Open Access
- 12 October 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (3) , 035401
Atomic layer deposition of Zr-sandwiched ZnO thin films for transparent thermoelectrics
Atomic layer deposited (ALD) transparent thermoelectric materials enable the introduction of energy harvesting and sensing devices onto surfaces of various shapes and sizes in imperceptible manner. Amongst these materials, ZnO has shown promising results in terms of both thermoelectric and optical characteristics. The thermoelectric performance of ZnO can be further optimized by introducing extrinsic doping, to the realization of which ALD provides excellent control. Here, we explore the effects of sandwiching of ZrO2 layers with ZnO on glass substrates. The room-temperature thermoelectric power factor is maximised at 116μW m−1 K−2 with samples containing a 2% nominal percentage of ZrO2. The addition of ZrO2 layers is further shown to reduce the thermal conductivity, resulting in a 20.2% decrease from the undoped ZnO at 2% doping. Our results contribute to increasing the understanding of the effects of Zr inclusion in structural properties and growth of ALD ZnO, as well as the thermal and thermoelectric properties of Zr-doped ZnO films in general.
- 12 October 2022
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (3) , 035401
Open AccessAtomic layer deposition of Zr-sandwiched ZnO thin films for transparent thermoelectrics
Atomic layer deposited (ALD) transparent thermoelectric materials enable the introduction of energy harvesting and sensing devices onto surfaces of various shapes and sizes in imperceptible manner. Amongst these materials, ZnO has shown promising results in terms of both thermoelectric and optical characteristics. The thermoelectric performance of ZnO can be further optimized by introducing extrinsic doping, to the realization of which ALD provides excellent control. Here, we explore the effects of sandwiching of ZrO2 layers with ZnO on glass substrates. The room-temperature thermoelectric power factor is maximised at 116μW m−1 K−2 with samples containing a 2% nominal percentage of ZrO2. The addition of ZrO2 layers is further shown to reduce the thermal conductivity, resulting in a 20.2% decrease from the undoped ZnO at 2% doping. Our results contribute to increasing the understanding of the effects of Zr inclusion in structural properties and growth of ALD ZnO, as well as the thermal and thermoelectric properties of Zr-doped ZnO films in general.
- Open Access
- 11 January 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (1) , 539-545
InSb Nanowire Direct Growth on Plastic for Monolithic Flexible Device Fabrication
- 11 January 2022
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 4 (1) , 539-545
Open AccessInSb Nanowire Direct Growth on Plastic for Monolithic Flexible Device Fabrication
- Open Access
- 28 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (12) , 14727-14734
Thermoelectric Characteristics of InAs Nanowire Networks Directly Grown on Flexible Plastic Substrates
- 28 November 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (12) , 14727-14734
Open AccessThermoelectric Characteristics of InAs Nanowire Networks Directly Grown on Flexible Plastic Substrates
- Open Access
Large-Area Thermal Distribution Sensor Based on Multilayer Graphene Ink
Emergent applications in wearable electronics require inexpensive sensors suited to scalable manufacturing. This work demonstrates a large-area thermal sensor based on distributed thermocouple architecture and ink-based multilayer graphene film. The proposed device combines the exceptional mechanical properties of multilayer graphene nanocomposite with the reliability and passive sensing performance enabled by thermoelectrics. The Seebeck coefficient of the spray-deposited films revealed an inverse thickness dependence with the largest value of 44.7 μV K−1 at 78 nm, which makes thinner films preferable for sensor applications. Device performance was demonstrated by touch sensing and thermal distribution mapping-based shape detection. Sensor output voltage in the latter application was on the order of 300 μV with a signal-to-noise ratio (SNR) of 35, thus enabling accurate detection of objects of different shapes and sizes. The results imply that films based on multilayer graphene ink are highly suitable to thermoelectric sensing applications, while the ink phase enables facile integration into existing fabrication processes.
Open AccessLarge-Area Thermal Distribution Sensor Based on Multilayer Graphene Ink
Emergent applications in wearable electronics require inexpensive sensors suited to scalable manufacturing. This work demonstrates a large-area thermal sensor based on distributed thermocouple architecture and ink-based multilayer graphene film. The proposed device combines the exceptional mechanical properties of multilayer graphene nanocomposite with the reliability and passive sensing performance enabled by thermoelectrics. The Seebeck coefficient of the spray-deposited films revealed an inverse thickness dependence with the largest value of 44.7 μV K−1 at 78 nm, which makes thinner films preferable for sensor applications. Device performance was demonstrated by touch sensing and thermal distribution mapping-based shape detection. Sensor output voltage in the latter application was on the order of 300 μV with a signal-to-noise ratio (SNR) of 35, thus enabling accurate detection of objects of different shapes and sizes. The results imply that films based on multilayer graphene ink are highly suitable to thermoelectric sensing applications, while the ink phase enables facile integration into existing fabrication processes.
- Open Access
- 1 November 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (61) , 35384-35391
Highly transparent copper iodide thin film thermoelectric generator on a flexible substrate
Simultaneously transparent and flexible conductive materials are in demand to follow the current trend in flexible technology. The search for materials with compliant optoelectronic properties, while simultaneously retaining their electric conductivity at high strain deformation, comprises promising opportunities in modern nanotechnology. Copper iodide (CuI) is not only the most transparent and highly conductive p-type material, but its optimization has contributed to improved ZT values in planar thin-film thermoelectrics. In this work, the readiness of CuI thin films to transparent, flexible technology is evidenced. A maximum ZT value of 0.29 for single CuI thin films of ca. 300 nm in thickness is reported. Values of open-circuit voltage Voc, short circuit current Isc and power output of p–n thermoelectric modules of Gallium-doped zinc oxide (GZO) and CuI thin films deposited on a transparent flexible Kapton® (type CS) substrate are reported, and a prototype of a flexible transparent thermoelectric generator based on 17 p–n modules was constructed. Bending analysis of CuI thin films reveals interesting, distinct results when submitted to compression and tension analysis – a behaviour not seen in conventional semiconducting thin films under equivalent strain conditions. A plausible account for such diversity is also included.
- 1 November 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (61) , 35384-35391
Open AccessHighly transparent copper iodide thin film thermoelectric generator on a flexible substrate
Simultaneously transparent and flexible conductive materials are in demand to follow the current trend in flexible technology. The search for materials with compliant optoelectronic properties, while simultaneously retaining their electric conductivity at high strain deformation, comprises promising opportunities in modern nanotechnology. Copper iodide (CuI) is not only the most transparent and highly conductive p-type material, but its optimization has contributed to improved ZT values in planar thin-film thermoelectrics. In this work, the readiness of CuI thin films to transparent, flexible technology is evidenced. A maximum ZT value of 0.29 for single CuI thin films of ca. 300 nm in thickness is reported. Values of open-circuit voltage Voc, short circuit current Isc and power output of p–n thermoelectric modules of Gallium-doped zinc oxide (GZO) and CuI thin films deposited on a transparent flexible Kapton® (type CS) substrate are reported, and a prototype of a flexible transparent thermoelectric generator based on 17 p–n modules was constructed. Bending analysis of CuI thin films reveals interesting, distinct results when submitted to compression and tension analysis – a behaviour not seen in conventional semiconducting thin films under equivalent strain conditions. A plausible account for such diversity is also included.
- Open Access
- 28 October 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (43) , 20507-20513
Thermal conductivity suppression in GaAs–AlAs core–shell nanowire arrays
Semiconductor nanowire heterostructures have been shown to provide appealing properties for optoelectronics and solid-state energy harvesting by thermoelectrics. Among these nanoarchitectures, coaxial core–shell nanowires have been of primary interest due to their electrical functionality, as well as intriguing phonon localization effects in the surface-dominated regime predicted via atomic simulations. However, experimental studies on the thermophysical properties of III–V semiconductor core–shell nanowires remain scarce regardless of the ubiquitous nature of these compounds in solid-state applications. Here, we present thermal conductivity measurements of the arrays of GaAs nanowires coated with AlAs shells. We unveil a strong suppression in thermal transport facilitated by the AlAs shells, up to ∼60%, producing a non-monotonous dependence of thermal conductivity on the shell thickness. Such translation of the novel heat transport phenomena to macroscopic nanowire arrays paves the way for rational thermal design in nanoscale applications.
- 28 October 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (43) , 20507-20513
Open AccessThermal conductivity suppression in GaAs–AlAs core–shell nanowire arrays
Semiconductor nanowire heterostructures have been shown to provide appealing properties for optoelectronics and solid-state energy harvesting by thermoelectrics. Among these nanoarchitectures, coaxial core–shell nanowires have been of primary interest due to their electrical functionality, as well as intriguing phonon localization effects in the surface-dominated regime predicted via atomic simulations. However, experimental studies on the thermophysical properties of III–V semiconductor core–shell nanowires remain scarce regardless of the ubiquitous nature of these compounds in solid-state applications. Here, we present thermal conductivity measurements of the arrays of GaAs nanowires coated with AlAs shells. We unveil a strong suppression in thermal transport facilitated by the AlAs shells, up to ∼60%, producing a non-monotonous dependence of thermal conductivity on the shell thickness. Such translation of the novel heat transport phenomena to macroscopic nanowire arrays paves the way for rational thermal design in nanoscale applications.
- 1 January 2007
- Published by Institution of Engineering and Technology (IET)
- p. 128
Tests of a 1.5-m reflector antenna in a 650 GHZ hologram CATR
- 1 January 2007
- Published by Institution of Engineering and Technology (IET)
- p. 128
Tests of a 1.5-m reflector antenna in a 650 GHZ hologram CATR