Patrick Diep
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Patrick Diep has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
- Alexander F. Yakunin
Department of Chemical Engineering and Applied Chemistry University of Toronto Canada
8 shared publications - Radhakrishnan Mahadevan
University of Toronto
7 shared publications - Joseph A. CotruvoJr.
The Pennsylvania State University
4 shared publications Radhakrishnan Mahadevan
Department of Chemical Engineering and Applied Chemistry, BioZone – Centre for Applied Bioscience and Bioengineering University of Toronto Toronto Ontario Canada
4 shared publications- Cody Scott Madsen
Biosciences and Biotechnology Division, Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA, USA
3 shared publications - Dan M. Park
Biosciences and Biotechnology Division, Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA, USA
3 shared publications
Latest Publications
- Open Access
- 18 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Near-Adjacent Heavy Lanthanide Separation and Sensing Using Dimerizing Lanmodulins
Protein-based recovery, detection, and separation of rare earth elements (REs) have accelerated since the discovery of the lanmodulin (LanM) proteins. While exceptional at total RE recovery, prior proteins, like most ligands, exhibited limited ability to differentiate REs, whether in detection or separations. Here we report two dimerizing LanMs (Al-LanM and Xan-LanM) that address these challenges. Uniquely among biomolecules, these proteins promote luminescence of up to six specific REs, enabling their use as biosensors to prospect for bacteria that accumulate the valuable heavy RE, terbium. The average adjacent-element separation factor (SF) for Al-LanM and structure-guided variants over the range of 11 REs, Nd–Lu, is 2.1, among the best for any ligand, protein or otherwise. By construction and immobilization of tandem dimers of Al-LanM competent to self-dimerize, we nearly double SF(Nd/Dy) relative to the immobilized monomer, establishing that protein dimerization amplifies RE discrimination. Leveraging this on-column dimerization behavior, we achieve separation of Y, Dy, Gd, Sm, and Nd from one another to >95% purities from a mixed-RE leachate derived from allanite ore, with just one pH step per element. In achieving robust protein-based separations with the simplest desorption scheme to date, our work highlights the many knobs biology uses to tune metal ion selectivity and introduces high-performance bioligands to identify heavy RE-accumulating organisms and to separate the most valuable REs, NdIII–LuIII.
- 18 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Open AccessNear-Adjacent Heavy Lanthanide Separation and Sensing Using Dimerizing Lanmodulins
Protein-based recovery, detection, and separation of rare earth elements (REs) have accelerated since the discovery of the lanmodulin (LanM) proteins. While exceptional at total RE recovery, prior proteins, like most ligands, exhibited limited ability to differentiate REs, whether in detection or separations. Here we report two dimerizing LanMs (Al-LanM and Xan-LanM) that address these challenges. Uniquely among biomolecules, these proteins promote luminescence of up to six specific REs, enabling their use as biosensors to prospect for bacteria that accumulate the valuable heavy RE, terbium. The average adjacent-element separation factor (SF) for Al-LanM and structure-guided variants over the range of 11 REs, Nd–Lu, is 2.1, among the best for any ligand, protein or otherwise. By construction and immobilization of tandem dimers of Al-LanM competent to self-dimerize, we nearly double SF(Nd/Dy) relative to the immobilized monomer, establishing that protein dimerization amplifies RE discrimination. Leveraging this on-column dimerization behavior, we achieve separation of Y, Dy, Gd, Sm, and Nd from one another to >95% purities from a mixed-RE leachate derived from allanite ore, with just one pH step per element. In achieving robust protein-based separations with the simplest desorption scheme to date, our work highlights the many knobs biology uses to tune metal ion selectivity and introduces high-performance bioligands to identify heavy RE-accumulating organisms and to separate the most valuable REs, NdIII–LuIII.
- Open Access
TreeGazer: Prospecting Protein Sequence-Function Landscapes via Phylogenetic Structure
Building diverse and informative protein sequence datasets is critical for understanding how function varies across sequence space. Because only a small fraction of sequences in a dataset can typically be experimentally characterised, strategies for selecting what sequences to characterise should maximise the information gained from each experiment. Here, we present TreeGazer, a phylogeny-informed framework that combines Bayesian optimisation with the topology of a tree to guide sequence selection. TreeGazer balances exploitation of sequences predicted to exhibit favourable properties against exploration of regions higher model uncertainty. Unlike existing approaches that apply Bayesian optimisation for sequence selection, TreeGazer does not rely on black-box models and instead uses latent representations of property distributions that are directly tied to phylogenetic structure. Modelling properties in this way enables biologically interpretable predictions and uncertainty estimates. Across two simulated selection campaigns, TreeGazer consistently selected sequences that produced datasets more representative of the underlying property distribution than alternative strategies that used protein language models. TreeGazer also performed effectively in low-data settings, where tree-guided selection enabled accurate identification of functional transitions across clades. TreeGazer can be run on conventional laptop computers while still providing equivalent or superior performance to embedding-based approaches. These results demonstrate that phylogenetic structure is a powerful and underutilised prior for guiding informative sequence selection.
Open AccessTreeGazer: Prospecting Protein Sequence-Function Landscapes via Phylogenetic Structure
Building diverse and informative protein sequence datasets is critical for understanding how function varies across sequence space. Because only a small fraction of sequences in a dataset can typically be experimentally characterised, strategies for selecting what sequences to characterise should maximise the information gained from each experiment. Here, we present TreeGazer, a phylogeny-informed framework that combines Bayesian optimisation with the topology of a tree to guide sequence selection. TreeGazer balances exploitation of sequences predicted to exhibit favourable properties against exploration of regions higher model uncertainty. Unlike existing approaches that apply Bayesian optimisation for sequence selection, TreeGazer does not rely on black-box models and instead uses latent representations of property distributions that are directly tied to phylogenetic structure. Modelling properties in this way enables biologically interpretable predictions and uncertainty estimates. Across two simulated selection campaigns, TreeGazer consistently selected sequences that produced datasets more representative of the underlying property distribution than alternative strategies that used protein language models. TreeGazer also performed effectively in low-data settings, where tree-guided selection enabled accurate identification of functional transitions across clades. TreeGazer can be run on conventional laptop computers while still providing equivalent or superior performance to embedding-based approaches. These results demonstrate that phylogenetic structure is a powerful and underutilised prior for guiding informative sequence selection.
- Open Access
- 18 March 2026
- Published by Springer Nature in Nature Chemical Biology
- Vol. 22 (5) , 829-839
A family portrait of lanmodulin selectivity for enhanced rare-earth separations
Proteins offer a molecular design space to create bespoke ligands for the separation of critical metals like rare earth elements (REs). However, data-intensive approaches to tune metalloprotein selectivity are constrained by the low-throughput nature of existing characterization methods. Here we invented an assay called 'SpyTag-Catcher Immobilization of Lanmodulin for Assaying Metal-Binding Selectivity' (SpyCI-LAMBS) to measure metalloprotein selectivity en masse. This 96-format workflow was used to study the selectivity of 621 lanmodulin (LanM) orthologs for 15 REs, revealing eight distinct selectivity profiles based on sequence-to-function analyses. We discovered >200 LanMs with stronger selectivity against low-value LaIII relative to the prototypical LanM. This includes a LanM that can perform a challenging one-stage separation of PrIII from LaIII with up to >99.9 mol% purity and 83% yield. SpyCI-LAMBS is a powerful tool that can rapidly collect high-fidelity selectivity data to inform metal ion separations and machine-learning-assisted metalloprotein design.
- 18 March 2026
- Published by Springer Nature in Nature Chemical Biology
- Vol. 22 (5) , 829-839
Open AccessA family portrait of lanmodulin selectivity for enhanced rare-earth separations
Proteins offer a molecular design space to create bespoke ligands for the separation of critical metals like rare earth elements (REs). However, data-intensive approaches to tune metalloprotein selectivity are constrained by the low-throughput nature of existing characterization methods. Here we invented an assay called 'SpyTag-Catcher Immobilization of Lanmodulin for Assaying Metal-Binding Selectivity' (SpyCI-LAMBS) to measure metalloprotein selectivity en masse. This 96-format workflow was used to study the selectivity of 621 lanmodulin (LanM) orthologs for 15 REs, revealing eight distinct selectivity profiles based on sequence-to-function analyses. We discovered >200 LanMs with stronger selectivity against low-value LaIII relative to the prototypical LanM. This includes a LanM that can perform a challenging one-stage separation of PrIII from LaIII with up to >99.9 mol% purity and 83% yield. SpyCI-LAMBS is a powerful tool that can rapidly collect high-fidelity selectivity data to inform metal ion separations and machine-learning-assisted metalloprotein design.
- Open Access
A family portrait of lanmodulin selectivity for enhanced rare-earth separations
Proteins offer a molecular design space to create bespoke ligands for the separation of critical metals, like rare earth elements (REs). However, data-intensive approaches to fine-tune metalloprotein selectivity are bottlenecked by the low-throughput nature of existing characterization methods. Here we invented an assay called SpyTag-Catcher Immobilization of Lanmodulin for Assaying Metal-Binding Selectivity (SpyCI-LAMBS) to measure metalloprotein selectivity en masse. This 96-format workflow was used to study the selectivity of 621 lanmodulin (LanM) orthologs for 15 REs, revealing eight distinct selectivity profiles based on sequence-to-function analyses. We discovered >200 LanMs with dampened selectivity for low-value La III relative to the prototypical LanM. This includes a LanM that can perform a challenging one-stage separation of Pr III from La III with up to >99.9 mol% purity and 83% yield. SpyCI-LAMBS is a powerful tool that can rapidly collect high-fidelity selectivity data to inform metal ion separations and machine learning-assisted metalloprotein design.
Open AccessA family portrait of lanmodulin selectivity for enhanced rare-earth separations
Proteins offer a molecular design space to create bespoke ligands for the separation of critical metals, like rare earth elements (REs). However, data-intensive approaches to fine-tune metalloprotein selectivity are bottlenecked by the low-throughput nature of existing characterization methods. Here we invented an assay called SpyTag-Catcher Immobilization of Lanmodulin for Assaying Metal-Binding Selectivity (SpyCI-LAMBS) to measure metalloprotein selectivity en masse. This 96-format workflow was used to study the selectivity of 621 lanmodulin (LanM) orthologs for 15 REs, revealing eight distinct selectivity profiles based on sequence-to-function analyses. We discovered >200 LanMs with dampened selectivity for low-value La III relative to the prototypical LanM. This includes a LanM that can perform a challenging one-stage separation of Pr III from La III with up to >99.9 mol% purity and 83% yield. SpyCI-LAMBS is a powerful tool that can rapidly collect high-fidelity selectivity data to inform metal ion separations and machine learning-assisted metalloprotein design.
- 27 March 2025
- Published by American Chemical Society (ACS) in ACS Chemical Biology
- Vol. 20 (4) , 830-844
Structural and Biochemical Insights into Lignin-Oxidizing Activity of Bacterial Peroxidases against Soluble Substrates and Kraft Lignin
Great interest has recently been drawn to the production of value-added products from lignin; however, its recalcitrance and high chemical complexity have made this challenging. Dye-decolorizing peroxidases and catalase-peroxidases are among the enzymes that are recognized to play important roles in environmental lignin oxidation. However, bacterial lignin-oxidizing enzymes remain less characterized compared to related proteins from fungi. In this study, screening of 18 purified bacterial peroxidases against the general chromogenic substrate 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) revealed the presence of peroxidase activity in all proteins. Agarose plate-based screens with kraft lignin identified detectable and high lignin oxidation activity in 15 purified proteins. Crystal structures were determined for the DyP-type peroxidases FC2591 from Frankia casuarinae, PF3257 from Pseudomonas fluorescens, and PR9465 from Pseudomonas rhizosphaerae. The structures revealed the presence of hemes with bound oxygens coordinated by conserved His, Arg, and Asp residues as well as three molecular tunnels connecting the heme with the protein surface. Structure-based site-directed mutagenesis of FC2591 identified at least five active site residues as essential for oxidase activity against both ABTS and lignin, whereas the S370A mutant protein showed a three- to 4-fold activity increase with both substrates. HPLC analysis of reaction products of the wild-type FC2591 and S370A mutant proteins with the model lignin dimer guaiacylglycerol-β-guaiacyl ether and kraft lignin revealed the formation of products consistent with the radical coupling of the reaction intermediates. Thus, this study identified novel bacterial heme peroxidases with lignin oxidation activity and provided further insights into our understanding of these enzymes.
- 27 March 2025
- Published by American Chemical Society (ACS) in ACS Chemical Biology
- Vol. 20 (4) , 830-844
Structural and Biochemical Insights into Lignin-Oxidizing Activity of Bacterial Peroxidases against Soluble Substrates and Kraft Lignin
Great interest has recently been drawn to the production of value-added products from lignin; however, its recalcitrance and high chemical complexity have made this challenging. Dye-decolorizing peroxidases and catalase-peroxidases are among the enzymes that are recognized to play important roles in environmental lignin oxidation. However, bacterial lignin-oxidizing enzymes remain less characterized compared to related proteins from fungi. In this study, screening of 18 purified bacterial peroxidases against the general chromogenic substrate 2,2'-azinobis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) revealed the presence of peroxidase activity in all proteins. Agarose plate-based screens with kraft lignin identified detectable and high lignin oxidation activity in 15 purified proteins. Crystal structures were determined for the DyP-type peroxidases FC2591 from Frankia casuarinae, PF3257 from Pseudomonas fluorescens, and PR9465 from Pseudomonas rhizosphaerae. The structures revealed the presence of hemes with bound oxygens coordinated by conserved His, Arg, and Asp residues as well as three molecular tunnels connecting the heme with the protein surface. Structure-based site-directed mutagenesis of FC2591 identified at least five active site residues as essential for oxidase activity against both ABTS and lignin, whereas the S370A mutant protein showed a three- to 4-fold activity increase with both substrates. HPLC analysis of reaction products of the wild-type FC2591 and S370A mutant proteins with the model lignin dimer guaiacylglycerol-β-guaiacyl ether and kraft lignin revealed the formation of products consistent with the radical coupling of the reaction intermediates. Thus, this study identified novel bacterial heme peroxidases with lignin oxidation activity and provided further insights into our understanding of these enzymes.
- Open Access
Synthetic communities as a model for determining interactions between a biofertilizer chassis organism and native microbial consortia
Biofertilizers are critical for sustainable agriculture since they can replace ecologically disruptive chemical fertilizers while improving the trajectory of soil and plant health. Yet, to continue improving deployment, the persistence of designer biofertilizers within native soil consortia must be elucidated and enhanced. Here, we describe a high-throughput, modular, and automation-friendly in vitro approach to screen for biofertilizer organism persistence within soil-derived consortia after co-cultivation with stable synthetic soil microbial communities (SynComs) obtained through a top-down cultivation process. We profiled ∼1200 SynComs isolated from various soil sources and cultivated in divergent media types, and detected significant phylogenetic diversity (e.g., Shannon index > 4) and richness (Observed richness > 400) across these communities. We observed high reproducibility in SynCom community structure from common soil and media types, which provided a testbed for assessing biofertilizer persistence within representative native consortia. Furthermore, we demonstrate the screening method described herein can be coupled with microbial engineering to efficiently identify soil-derived SynComs where an engineered biofertilizer organism (i.e. Bacillus subtilis ) persists. Additionally, our approach enables an analysis of the ecological impact of B. subtilis inoculation on SynCom structure and profile alterations in community diversity and richness (or lack thereof) associated with the presence of a genetically modified model bacterium. Ultimately, this work establishes a modular pipeline that could be integrated into a variety of microbiology/microbiome-relevant workflows or related applications that would benefit from assessing persistence and interaction of a specific organism of interest with native consortia.
Open AccessSynthetic communities as a model for determining interactions between a biofertilizer chassis organism and native microbial consortia
Biofertilizers are critical for sustainable agriculture since they can replace ecologically disruptive chemical fertilizers while improving the trajectory of soil and plant health. Yet, to continue improving deployment, the persistence of designer biofertilizers within native soil consortia must be elucidated and enhanced. Here, we describe a high-throughput, modular, and automation-friendly in vitro approach to screen for biofertilizer organism persistence within soil-derived consortia after co-cultivation with stable synthetic soil microbial communities (SynComs) obtained through a top-down cultivation process. We profiled ∼1200 SynComs isolated from various soil sources and cultivated in divergent media types, and detected significant phylogenetic diversity (e.g., Shannon index > 4) and richness (Observed richness > 400) across these communities. We observed high reproducibility in SynCom community structure from common soil and media types, which provided a testbed for assessing biofertilizer persistence within representative native consortia. Furthermore, we demonstrate the screening method described herein can be coupled with microbial engineering to efficiently identify soil-derived SynComs where an engineered biofertilizer organism (i.e. Bacillus subtilis ) persists. Additionally, our approach enables an analysis of the ecological impact of B. subtilis inoculation on SynCom structure and profile alterations in community diversity and richness (or lack thereof) associated with the presence of a genetically modified model bacterium. Ultimately, this work establishes a modular pipeline that could be integrated into a variety of microbiology/microbiome-relevant workflows or related applications that would benefit from assessing persistence and interaction of a specific organism of interest with native consortia.
- Open Access
- 7 October 2024
- Published by Frontiers Media SA in Frontiers in Education
- Vol. 9, 1441720
Synthetic biology education and pedagogy: a review of evolving practices in a growing discipline
Synthetic biology is a growing field with an increasing number of successful applications. Yet, synthetic biology (SynBio) education initiatives are underreported and disconnected from each other. In this review we survey the literature on SynBio education and stratify this body of work into three categories: classroom activities, course designs, and program-level curricula-planning. For each category, we discuss the methods used to assess students’ experiences and achievement of learning objectives. Throughout, we identify trends and opportunities for further development in SynBio education. We determined that the design of low-cost education kits is a growing opportunity to support student learning at the level of classroom activities. In support of that work, we present a mapping of published education kits onto Bloom’s taxonomy, taking into account increasing accumulation of knowledge through continued experience. We further found that project-based learning is used widely and has proven effective in course designs. To facilitate such activities, we provide a high-level guide for the conversion of a didactic course into a project-based learning course. Further, we note that, currently, programs are delivered primarily at the graduate level, taking inspiration from traditional degree programs while incorporating interdisciplinary training. Finally, we find that design-based research may provide an effective framework for an iterative, mixed-method study design. To support such efforts, we provide a schematic overview of design-based research and its application to a learning progression for interdisciplinary skills. We conclude with a discussion of specific learning concepts that may be useful to SynBio educators and education researchers.
- 7 October 2024
- Published by Frontiers Media SA in Frontiers in Education
- Vol. 9, 1441720
Open AccessSynthetic biology education and pedagogy: a review of evolving practices in a growing discipline
Synthetic biology is a growing field with an increasing number of successful applications. Yet, synthetic biology (SynBio) education initiatives are underreported and disconnected from each other. In this review we survey the literature on SynBio education and stratify this body of work into three categories: classroom activities, course designs, and program-level curricula-planning. For each category, we discuss the methods used to assess students’ experiences and achievement of learning objectives. Throughout, we identify trends and opportunities for further development in SynBio education. We determined that the design of low-cost education kits is a growing opportunity to support student learning at the level of classroom activities. In support of that work, we present a mapping of published education kits onto Bloom’s taxonomy, taking into account increasing accumulation of knowledge through continued experience. We further found that project-based learning is used widely and has proven effective in course designs. To facilitate such activities, we provide a high-level guide for the conversion of a didactic course into a project-based learning course. Further, we note that, currently, programs are delivered primarily at the graduate level, taking inspiration from traditional degree programs while incorporating interdisciplinary training. Finally, we find that design-based research may provide an effective framework for an iterative, mixed-method study design. To support such efforts, we provide a schematic overview of design-based research and its application to a learning progression for interdisciplinary skills. We conclude with a discussion of specific learning concepts that may be useful to SynBio educators and education researchers.
- Open Access
- 5 September 2024
- Published by American Chemical Society (ACS) in JACS Au
- Vol. 4 (11) , 4273-4284
EF-Hand Battle Royale: Hetero-ion Complexation in Lanmodulin
The lanmodulin (LanM) protein has emerged as an effective means for rare earth element (REE) extraction and separation from complex feedstocks without the use of organic solvents. Whereas the binding of LanM to individual REEs has been well characterized, little is known about the thermodynamics of mixed metal binding complexes (i.e., heterogeneous ion complexes), which limits the ability to accurately predict separation performance for a given metal ion mixture. In this paper, we employ the law of mass action to establish a theory of perfect cooperativity for LanM-REE complexation at the two highest-affinity binding sites. The theory is then used to derive an equation that explains the nonintuitive REE binding behavior of LanM, where separation factors for binary pairs of ions vary widely based on the ratio of ions in the aqueous phase, a phenomenon that is distinct from single-ion-binding chemical chelators. We then experimentally validate this theory and perform the first quantitative characterization of LanM complexation with heterogeneous ion pairs using resin-immobilized LanM. Importantly, the resulting homogeneous and heterogeneous constants enable accurate prediction of the equilibrium state of LanM in the presence of mixtures of up to 10 REEs, confirming that the perfect cooperativity model is an accurate mechanistic description of REE complexation by LanM. We further employ the model to simulate separation performance over a range of homogeneous and heterogeneous binding constants, revealing important insights into how mixed binding differentially impacts REE separations based on the relative positioning of the ion pairs within the lanthanide series. In addition to informing REE separation process optimization, these results provide mathematical and experimental insight into competition dynamics in other ubiquitous and medically relevant, cooperative binding proteins, such as calmodulin.
- 5 September 2024
- Published by American Chemical Society (ACS) in JACS Au
- Vol. 4 (11) , 4273-4284
Open AccessEF-Hand Battle Royale: Hetero-ion Complexation in Lanmodulin
The lanmodulin (LanM) protein has emerged as an effective means for rare earth element (REE) extraction and separation from complex feedstocks without the use of organic solvents. Whereas the binding of LanM to individual REEs has been well characterized, little is known about the thermodynamics of mixed metal binding complexes (i.e., heterogeneous ion complexes), which limits the ability to accurately predict separation performance for a given metal ion mixture. In this paper, we employ the law of mass action to establish a theory of perfect cooperativity for LanM-REE complexation at the two highest-affinity binding sites. The theory is then used to derive an equation that explains the nonintuitive REE binding behavior of LanM, where separation factors for binary pairs of ions vary widely based on the ratio of ions in the aqueous phase, a phenomenon that is distinct from single-ion-binding chemical chelators. We then experimentally validate this theory and perform the first quantitative characterization of LanM complexation with heterogeneous ion pairs using resin-immobilized LanM. Importantly, the resulting homogeneous and heterogeneous constants enable accurate prediction of the equilibrium state of LanM in the presence of mixtures of up to 10 REEs, confirming that the perfect cooperativity model is an accurate mechanistic description of REE complexation by LanM. We further employ the model to simulate separation performance over a range of homogeneous and heterogeneous binding constants, revealing important insights into how mixed binding differentially impacts REE separations based on the relative positioning of the ion pairs within the lanthanide series. In addition to informing REE separation process optimization, these results provide mathematical and experimental insight into competition dynamics in other ubiquitous and medically relevant, cooperative binding proteins, such as calmodulin.
- Open Access
- 31 March 2024
- Published by Wiley in The FEBS Journal
- Vol. 291 (13) , 2980-2993
Ni(II)‐binding affinity of CcNikZ‐II and its homologs: the role of the HH‐prong and variable loop revealed by structural and mutational studies
Extracytoplasmic Ni(II)-binding proteins (NiBPs) are molecular shuttles involved in cellular nickel uptake. Here, we determined the crystal structure of apo CcNikZ-II at 2.38 & Aring;, which revealed a Ni(II)-binding site comprised of the double His (HH-)prong (His511, His512) and a short variable (v-)loop nearby (Thr59-Thr64, TEDKYT). Mutagenesis of the site identified Glu60 and His511 as critical for high affinity Ni(II)-binding. Phylogenetic analysis showed 15 protein clusters with two groups containing the HH-prong. Metal-binding assays with 11 purified NiBPs containing this feature yielded higher Ni(II)-binding affinities. Replacement of the wild type v-loop with those from other NiBPs improved the affinity by up to an order of magnitude. This work provides molecular insights into the determinants for Ni(II) affinity and paves way for NiBP engineering.
- 31 March 2024
- Published by Wiley in The FEBS Journal
- Vol. 291 (13) , 2980-2993
Open AccessNi(II)‐binding affinity of CcNikZ‐II and its homologs: the role of the HH‐prong and variable loop revealed by structural and mutational studies
Extracytoplasmic Ni(II)-binding proteins (NiBPs) are molecular shuttles involved in cellular nickel uptake. Here, we determined the crystal structure of apo CcNikZ-II at 2.38 & Aring;, which revealed a Ni(II)-binding site comprised of the double His (HH-)prong (His511, His512) and a short variable (v-)loop nearby (Thr59-Thr64, TEDKYT). Mutagenesis of the site identified Glu60 and His511 as critical for high affinity Ni(II)-binding. Phylogenetic analysis showed 15 protein clusters with two groups containing the HH-prong. Metal-binding assays with 11 purified NiBPs containing this feature yielded higher Ni(II)-binding affinities. Replacement of the wild type v-loop with those from other NiBPs improved the affinity by up to an order of magnitude. This work provides molecular insights into the determinants for Ni(II) affinity and paves way for NiBP engineering.
- Open Access
Quantifying metal ion specificity of the nickel-binding protein Cc NikZ-II from Clostridium carboxidivorans in the presence of competing metal ions
Many proteins bind transition metal ions as cofactors to carry out their biological functions. Despite binding affinities for divalent transition metal ions being predominantly dictated by the Irving-Williams series for wild-type proteins, in vivo metal ion binding specificity is ensured by intracellular mechanisms that regulate free metal ion concentrations. However, a growing area of biotechnology research considers the use of metal-binding proteins in vitro to purify specific metal ions from wastewater, where specificity is dictated by the protein’s metal binding affinities. A goal of metalloprotein engineering is to modulate these affinities to improve a protein’s specificity towards a particular metal; however, the quantitative relationship between the affinities and the equilibrium metal-bound protein fractions depends on the underlying binding kinetics. Here we demonstrate a high-throughput intrinsic tryptophan fluorescence quenching method to validate kinetic models in multi-metal solutions for Cc NikZ-II, a nickel-binding protein from Clostridium carboxidivorans . Using our validated models, we quantify the relationship between binding affinity and specificity in different classes of metal-binding models for Cc NikZ-II. We further demonstrate that principles for improving specificity through changes in binding affinity are qualitatively different depending on the competing metals, highlighting the power of mechanistic models to guide metalloprotein engineering targets.
Open AccessQuantifying metal ion specificity of the nickel-binding protein Cc NikZ-II from Clostridium carboxidivorans in the presence of competing metal ions
Many proteins bind transition metal ions as cofactors to carry out their biological functions. Despite binding affinities for divalent transition metal ions being predominantly dictated by the Irving-Williams series for wild-type proteins, in vivo metal ion binding specificity is ensured by intracellular mechanisms that regulate free metal ion concentrations. However, a growing area of biotechnology research considers the use of metal-binding proteins in vitro to purify specific metal ions from wastewater, where specificity is dictated by the protein’s metal binding affinities. A goal of metalloprotein engineering is to modulate these affinities to improve a protein’s specificity towards a particular metal; however, the quantitative relationship between the affinities and the equilibrium metal-bound protein fractions depends on the underlying binding kinetics. Here we demonstrate a high-throughput intrinsic tryptophan fluorescence quenching method to validate kinetic models in multi-metal solutions for Cc NikZ-II, a nickel-binding protein from Clostridium carboxidivorans . Using our validated models, we quantify the relationship between binding affinity and specificity in different classes of metal-binding models for Cc NikZ-II. We further demonstrate that principles for improving specificity through changes in binding affinity are qualitatively different depending on the competing metals, highlighting the power of mechanistic models to guide metalloprotein engineering targets.