Farid Sartipi
Research Subjects
Farid Sartipi has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Institute of Construction Materials
18 shared publicationsWestern Sydney University
9 shared publications- Alan Todhunter3 shared publications
Mark Crowley
3 shared publicationsAli Gharizadeh
2 shared publicationsMay Gamil
2 shared publications
Latest Publications
- 1 January 2022
- Published by Springer Nature
- p. 97-110
A Briefing on Technological, Societal, and Economical Aspects of Automation in Construction
- 1 January 2022
- Published by Springer Nature
- p. 97-110
A Briefing on Technological, Societal, and Economical Aspects of Automation in Construction
- 4 July 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (4)
Negative interest rate: Way to tackle inflationary housing prices
While housing affordability is on drop by the rising prices, specially in large cities, the young generation suffers from the pending independence as a result. Despite the significantly good industrial performance in the construction sector in Australia, reduced housing prices is still under burden by the middle mans and real estate brokers. Several socio-economic factors are indeed involved in the rising prices such as unequal wealth distribution, banking strategies, wages growth rate, mortgage interest rate, population growth, etc. which are being discussed in this article. Data had been collected from the Australian Bureau of Statistics in order to compare and analyze the effectiveness of negative interest rates on housing affordability. New financial asset classes such as cryptocurrencies had also been introduced in order to propose alternatives to the traditional investment banking which also ensures profit earning for bankers.
- 4 July 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (4)
Negative interest rate: Way to tackle inflationary housing prices
While housing affordability is on drop by the rising prices, specially in large cities, the young generation suffers from the pending independence as a result. Despite the significantly good industrial performance in the construction sector in Australia, reduced housing prices is still under burden by the middle mans and real estate brokers. Several socio-economic factors are indeed involved in the rising prices such as unequal wealth distribution, banking strategies, wages growth rate, mortgage interest rate, population growth, etc. which are being discussed in this article. Data had been collected from the Australian Bureau of Statistics in order to compare and analyze the effectiveness of negative interest rates on housing affordability. New financial asset classes such as cryptocurrencies had also been introduced in order to propose alternatives to the traditional investment banking which also ensures profit earning for bankers.
- 2 April 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (3)
Publicizing construction firms by cryptocurrency
Growth as an inevitable human nature roots even in our business operation. Private entities, similarly, in seek of expansion and maybe more influence over their area of expertise, decide to go public in a certain point of time. The timing to move from private to public, indeed, is a critical factor in the future success of the business. In the traditional capitalist structure of this move, small private companies, which are defined by the Australian Securities and Investments Commission as those entities with consolidated revenue of less than $50 million per year, choose between sellout to a parent firm or Initial Public Offering (IPO). Both options have their own advantages and disadvantages. Yet, they are both complex, highly regulated, costly, and frustrating which are truly major drawbacks for small entities. Failure to go public caused by these drawbacks results in death of small businesses and loss of jobs which is followed by terrible socio-economic consequences. To avoid the conventional frustrating publicity of the private firms, in this article, utilization of cryptocurrency as the modern financial instrument is discussed. Digital currencies enable fast transition, globalization, grassroot economy, and social justice.
- 2 April 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (3)
Publicizing construction firms by cryptocurrency
Growth as an inevitable human nature roots even in our business operation. Private entities, similarly, in seek of expansion and maybe more influence over their area of expertise, decide to go public in a certain point of time. The timing to move from private to public, indeed, is a critical factor in the future success of the business. In the traditional capitalist structure of this move, small private companies, which are defined by the Australian Securities and Investments Commission as those entities with consolidated revenue of less than $50 million per year, choose between sellout to a parent firm or Initial Public Offering (IPO). Both options have their own advantages and disadvantages. Yet, they are both complex, highly regulated, costly, and frustrating which are truly major drawbacks for small entities. Failure to go public caused by these drawbacks results in death of small businesses and loss of jobs which is followed by terrible socio-economic consequences. To avoid the conventional frustrating publicity of the private firms, in this article, utilization of cryptocurrency as the modern financial instrument is discussed. Digital currencies enable fast transition, globalization, grassroot economy, and social justice.
- 3 February 2021
- Published by Springer Nature
- p. 1050-1059
Gaps Between Supply and Demand of Recycled Aggregate: A Sydney Metropolitan Case Study
- 3 February 2021
- Published by Springer Nature
- p. 1050-1059
Gaps Between Supply and Demand of Recycled Aggregate: A Sydney Metropolitan Case Study
- Open Access
- 6 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 485
Predicting Compressive Strength of Concrete Containing Recycled Aggregate Using Modified ANN with Different Optimization Algorithms
Using recycled aggregate in concrete is one of the best ways to reduce construction pollution and prevent the exploitation of natural resources to provide the needed aggregate. However, recycled aggregates affect the mechanical properties of concrete, but the existing information on the subject is less than what the industry needs. Compressive strength, on the other hand, is the most important mechanical property of concrete. Therefore, having predictive models to provide the required information can be helpful to convince the industry to increase the use of recycled aggregate in concrete. In this research, three different optimization algorithms including genetic algorithm (GA), salp swarm algorithm (SSA), and grasshopper optimization algorithm (GOA) are employed to be hybridized with artificial neural network (ANN) separately to predict the compressive strength of concrete containing recycled aggregate, and a M5P tree model is used to test the efficiency of the ANNs. The results of this study show the superior efficiency of the modified ANN with SSA when compared to other models. However, the statistical indicators of the hybrid ANNs with SSA, GA, and GOA are so close to each other.
- 6 January 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (2) , 485
Open AccessPredicting Compressive Strength of Concrete Containing Recycled Aggregate Using Modified ANN with Different Optimization Algorithms
Using recycled aggregate in concrete is one of the best ways to reduce construction pollution and prevent the exploitation of natural resources to provide the needed aggregate. However, recycled aggregates affect the mechanical properties of concrete, but the existing information on the subject is less than what the industry needs. Compressive strength, on the other hand, is the most important mechanical property of concrete. Therefore, having predictive models to provide the required information can be helpful to convince the industry to increase the use of recycled aggregate in concrete. In this research, three different optimization algorithms including genetic algorithm (GA), salp swarm algorithm (SSA), and grasshopper optimization algorithm (GOA) are employed to be hybridized with artificial neural network (ANN) separately to predict the compressive strength of concrete containing recycled aggregate, and a M5P tree model is used to test the efficiency of the ANNs. The results of this study show the superior efficiency of the modified ANN with SSA when compared to other models. However, the statistical indicators of the hybrid ANNs with SSA, GA, and GOA are so close to each other.
- 2 January 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (2)
Dynamic data processing for building energy consumption
With the growing attention to smart buildings, local governments are seeking practical ways to optimize the energy consumption of commercial buildings. An ideal smart building is capable of monitoring its own energy consumption and adjusting the operation of electric devices, being lighting and air conditioners, based on the occupant behaviour. In this study, data had been obtained from the monitoring sensors in a commercial building located in the heart of Sydney from 2013 until 2020 on a 15-minute time intervals. The data derivation and analysis are intrinsically static at the moment which makes it difficult for building management to make instantaneous decision regarding the measures to be taken for a lower energy consumption. Using data analysis and visualization tools in Tableau, this study provides detailed insights about the trends in energy consumption in the given building. The outcomes facilitate the decision making for building management and can be seen as a milestone towards a dynamic optimization protocol in a bigger picture which is introduced in the second part of this study.
- 2 January 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (2)
Dynamic data processing for building energy consumption
With the growing attention to smart buildings, local governments are seeking practical ways to optimize the energy consumption of commercial buildings. An ideal smart building is capable of monitoring its own energy consumption and adjusting the operation of electric devices, being lighting and air conditioners, based on the occupant behaviour. In this study, data had been obtained from the monitoring sensors in a commercial building located in the heart of Sydney from 2013 until 2020 on a 15-minute time intervals. The data derivation and analysis are intrinsically static at the moment which makes it difficult for building management to make instantaneous decision regarding the measures to be taken for a lower energy consumption. Using data analysis and visualization tools in Tableau, this study provides detailed insights about the trends in energy consumption in the given building. The outcomes facilitate the decision making for building management and can be seen as a milestone towards a dynamic optimization protocol in a bigger picture which is introduced in the second part of this study.
- 2 January 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (2)
Preliminary structural design for extraterrestrial buildings
The adventurous human nature had recently expanded to extraterrestrial habitation. Public billion-dollar companies such as SpaceX and Blue Origin are investing extra ordinary capitals in space exploration. Australian Space Agency had also joined the space competition in 2018 in a so-called Mars mission. Although might sound far reaching, the idea of building human habitats on Mars requires well evaluated engineering design in the first stage as the cost of transporting equipment and materials as light as a kilogram to another planet is a massive financial burden. Throughout this passage, the effect of gravity, atmospheric pressure, and radiation on extra terrestrial buildings will be discussed. Following that a cylindrical structure as the most stable type of shell against internal pressure will be analyzed.
- 2 January 2021
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (2)
Preliminary structural design for extraterrestrial buildings
The adventurous human nature had recently expanded to extraterrestrial habitation. Public billion-dollar companies such as SpaceX and Blue Origin are investing extra ordinary capitals in space exploration. Australian Space Agency had also joined the space competition in 2018 in a so-called Mars mission. Although might sound far reaching, the idea of building human habitats on Mars requires well evaluated engineering design in the first stage as the cost of transporting equipment and materials as light as a kilogram to another planet is a massive financial burden. Throughout this passage, the effect of gravity, atmospheric pressure, and radiation on extra terrestrial buildings will be discussed. Following that a cylindrical structure as the most stable type of shell against internal pressure will be analyzed.
- 2 October 2020
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (1)
A brief critical view on the carbon-conditioning of recycled aggregate using pressure chamber
- 2 October 2020
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 2 (1)
A brief critical view on the carbon-conditioning of recycled aggregate using pressure chamber
- Open Access
- 2 July 2020
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 1 (4)
Diffusion of Innovation Theory in the Realm of Environmental Construction
- 2 July 2020
- Published by Institute of Construction Materials in Journal of Construction Materials
- Vol. 1 (4)
Open AccessDiffusion of Innovation Theory in the Realm of Environmental Construction