Najwa Mohd Faudzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Najwa Mohd Faudzi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad Rashidy Razali
Universiti Teknologi MARA (UiTM)
2 shared publications - Asrulnizam Abd Manaf
Universiti Sains Malaysia
2 shared publications - Nurul Huda Abd Rahman
Universiti Teknologi MARA
2 shared publications - Ahmad Aziz Azlan
Engineering Faculty, Universiti Teknologi Brunei, Jalan Tungku Link Gadong BE1410, Brunei Darussalam
1 shared publication Ahmad Azlan Aziz
Universiti Teknologi Brunei, Brunei Darussalam
1 shared publicationAiza Mahyuni Mozi
School of Electrical Engineering, Universiti Teknologi MARA, Cawangan Pulau Pinang, Pulau Pinang, Malaysia
1 shared publication
Latest Publications
- Open Access
- 1 April 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 38 (1) , 227-242
Flexible hybrid graphene-based NFC tag antenna for temperature monitoring application
A hybrid graphene-based material, composed of reduced graphene oxide (rGO) and silver nanoparticle (AgNP), has been proposed for a near field communication (NFC) tag antenna with an integrated, flexible temperature monitoring circuit. The limited availability of high-conductivity graphene-based materials in the market has restricted the use of graphene in NFC tag applications. Therefore, this paper proposes a hybrid graphene-based composition featuring a high conductivity of 3.95×106 S/m. The feasibility of this material for NFC tags had not been validated previously, which is the main motivation for this research. The synthesis of the materials, along with the design, fabrication, and characterization of the NFC tag, is also presented. Results show that the inkjet-printed tag achieves a good reading range of up to 3 cm and demonstrates robustness against bending from 60⁰ to 190⁰, maintaining a maximum reading range of 1.3 cm. Performance on various materials, such as plastic, paper, and carton, also shows minimal impact on frequency shifting. Additionally, the graphene-based NFC tag integrates well with the temperature circuit, effectively monitoring temperatures in the 20-60 ⁰C range in real-time. This makes the developed tag suitable for applications such as food safety monitoring systems through NFC-integrated packaging.
- 1 April 2025
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 38 (1) , 227-242
Open AccessFlexible hybrid graphene-based NFC tag antenna for temperature monitoring application
A hybrid graphene-based material, composed of reduced graphene oxide (rGO) and silver nanoparticle (AgNP), has been proposed for a near field communication (NFC) tag antenna with an integrated, flexible temperature monitoring circuit. The limited availability of high-conductivity graphene-based materials in the market has restricted the use of graphene in NFC tag applications. Therefore, this paper proposes a hybrid graphene-based composition featuring a high conductivity of 3.95×106 S/m. The feasibility of this material for NFC tags had not been validated previously, which is the main motivation for this research. The synthesis of the materials, along with the design, fabrication, and characterization of the NFC tag, is also presented. Results show that the inkjet-printed tag achieves a good reading range of up to 3 cm and demonstrates robustness against bending from 60⁰ to 190⁰, maintaining a maximum reading range of 1.3 cm. Performance on various materials, such as plastic, paper, and carton, also shows minimal impact on frequency shifting. Additionally, the graphene-based NFC tag integrates well with the temperature circuit, effectively monitoring temperatures in the 20-60 ⁰C range in real-time. This makes the developed tag suitable for applications such as food safety monitoring systems through NFC-integrated packaging.
- Open Access
- 1 March 2023
- Published by UiTM Press, Universiti Teknologi MARA in ESTEEM Academic Journal
- Vol. 19 (March) , 54-67
Analysis of Flexible Silver-printed NFC Tag Antenna on Miniaturization and Bending Effect
- 1 March 2023
- Published by UiTM Press, Universiti Teknologi MARA in ESTEEM Academic Journal
- Vol. 19 (March) , 54-67
Open AccessAnalysis of Flexible Silver-printed NFC Tag Antenna on Miniaturization and Bending Effect
- Open Access
- 1 August 2015
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 5 (4) , 750-758
Metal Mountable Ladder Feed Line UHF-RFID Tag Antenna
A microstrip dipole UHF-RFID tag antenna that can be mounted on metal object is presented in this paper. The antenna, which has a very simple structure without any shorting pin and shorting plate, is composed of ladder feed line, rectangular loop, capacitive tip-loading and T-match structure. The insertion of ground plane in the tag antenna design reduces the negative impact of metal object to the performance of the tag antenna. The tag is designed to operate in the Malaysia frequency range with the center frequency of 921 MHz. The performance of the tag is evaluated through simulation and measurement in terms of impedance matching, antenna reflection coefficient and tag reading range. The measured reading range obtained when the tag is in free air and on metal object is 2.3 m and 2.2 m respectively.
- 1 August 2015
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 5 (4) , 750-758
Open AccessMetal Mountable Ladder Feed Line UHF-RFID Tag Antenna
A microstrip dipole UHF-RFID tag antenna that can be mounted on metal object is presented in this paper. The antenna, which has a very simple structure without any shorting pin and shorting plate, is composed of ladder feed line, rectangular loop, capacitive tip-loading and T-match structure. The insertion of ground plane in the tag antenna design reduces the negative impact of metal object to the performance of the tag antenna. The tag is designed to operate in the Malaysia frequency range with the center frequency of 921 MHz. The performance of the tag is evaluated through simulation and measurement in terms of impedance matching, antenna reflection coefficient and tag reading range. The measured reading range obtained when the tag is in free air and on metal object is 2.3 m and 2.2 m respectively.