Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Krishnamachar Prasad has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sliding Mode Control Application in Knee and Lower-Limb Exoskeletons: A Review

    by Somayeh Khamoushi, Jeff Kilby, Gonzalo Farias, Lorenzo Garcia, Krishnamachar Prasad

    This review systematically surveys Sliding-Mode Control (SMC) strategies applied to knee and lower-limb exoskeletons with direct knee-related control or evaluation, emphasising research published over the last decade (2015–2025). The paper first outlines key control challenges arising from nonlinear joint dynamics, external disturbances, sensor feedback, and uncertainties in human–robot interaction. The review then analyses 126 unique studies, including peer-reviewed journal articles and full conference papers, covering classical SMC, higher-order formulations, observer-based architectures, intelligent adaptive schemes, and optimisation-enhanced approaches. Beyond tracking accuracy and chattering behaviour, the review considers practical aspects relevant to wearable rehabilitation systems, including sensing requirements, real-time implementation, patient-specific adaptation, and human–robot interaction. These aspects highlight current methodological trends, practical limitations, and the gap between control performance and real-world rehabilitation use. The review aims to support the development of more robust, safe, and practically deployable control frameworks for knee and lower-limb exoskeletons in rehabilitation applications.

  • Open Access

    Development and Characterization of a Simulink Model and Rule-Based Energy Management for an Off-Grid Hybrid PV–Wind EV Charging Station: A Baseline for Distributionally Robust Control

    by Onyeka Ibezim, Krishnamachar Prasad, Jeff Kilby

    This study presents a developed and characterized Simulink model of an off-grid hybrid photovoltaic (PV) and wind electric vehicle (EV) charging station and characterizes the performance of a rule-based energy management strategy (EMS) that coordinates its four power branches. Predominantly techno-economic studies of such architectures have not provided dynamic models sufficiently to characterize transient behavior, mode transitions, or control limitations. The model integrates a 78.1 kW PV array, a 20 kW wind turbine, a 150 kWh energy-storage unit, and a 25 kW EV port on a regulated 600 V DC bus. Each subsystem is characterized in isolation; the integrated system is exercised under a 50 s four-window stepped-irradiance scenario. During high- and low-irradiance windows, the EMS coordinates all four branches successfully, with bus voltage regulated within ±7 V of a +3.7% steady-state offset. At the intermediate-irradiance window, the filtered PV power oscillates across the hysteresis band, producing 74 charge/discharge transitions in 10 s and sub-millisecond bus voltage transients reaching 903 V, exceeding the 750 V safety threshold. Remediation experiments show that a 50 ms debounce eliminates the chatter but not the transient, identifying two independent architectural limitations of the rule-based design. The dynamic model and baseline established here inform a companion two-stage distributionally robust optimization (TSDRO) controller for the same architecture.

  • Open Access

    Temporal Convolutional Network with a Physics-Informed Decoder for 15-Minute-Ahead Solar Power Forecasting

    by Muhammad Imran Munawar, Jeff Kilby, Krishnamachar Prasad

    As renewable energy grows, photovoltaic power integration into power grids has increased, and high solar penetration creates challenges for power system operation. Accurate, near-real-time solar power forecasting over short time intervals is therefore important for supporting stable grid operation and efficient energy scheduling. This study presents a novel Enhanced Temporal Convolutional Network (TCN) model to predict solar power output 15 min in advance. The model uses dilated convolutions to capture temporal patterns, while multi-head attention and adaptive feature gating help identify important dependencies and relevant inputs. It also extracts long-term trends and short-term variations using seasonal decomposition. A physics-informed decoder builds the forecast by correcting a persistence-based reference forecast. The model was trained on a dataset comprising 5.7 years of real-world solar power generation records from Arizona. After bias correction, the model achieves a root mean squared error (RMSE) of 281.0 ± 4.6 Wh, a mean absolute error (MAE) of 108.8 ± 2.9 Wh, and a coefficient of determination (R2) of 0.928 ± 0.002 across three random seeds. Compared with the baseline models, the proposed Enhanced TCN reduces the RMSE by 7.0% to 18.8% over five deep learning models, by 8.3% over persistence and by 4.9% over smart persistence. Without bias correction, the model performs no better than smart persistence. The ablation study shows that the physics-informed decoder gives the main gain.

  • Open Access

    State-Dependent Merit-Order Effects in a Hydro-Dominated Market: Conditioning Variable-Renewable Price Suppression on the Marginal Fuel Regime in New Zealand

    by Ahmed Hassan, Krishnamachar Prasad, Jeff Kilby

    The merit-order effect (MOE), the suppression of wholesale prices by zero-marginal-cost variable renewable energy (VRE), is typically estimated as a single average coefficient per market. In a hydro-dominated system, the price-setting technology alternates between hydro and thermal plants, so the MOE should depend on the operating state. Using New Zealand nodal data, a baseline panel model first reproduces a published 2011–12 seasonal benchmark to within NZ$0.22/megawatt-hour (MWh). A model conditioning the VRE coefficient on reservoir storage (2015–24, 245 nodes, 28,827 node-month observations from approximately 42 million half-hourly records) passes every in-sample diagnostic (within R2 = 0.81) yet fails out-of-sample and stability testing. The interaction adds no significant predictive value beyond a storage main effect (p = 0.15–0.22) and reverses sign across sub-periods (+58 to −51), an instability not attributable to collinearity. Replacing the storage level with the monthly thermal generation share, a dispatch-based proxy for the hydro-thermal regime, yields a stable, significant, out-of-sample-validated interaction (clustered t = 5.0, leave-one-month-out cross-validation gain +14.2%) that survives direct hydrological and demand controls, including a head-to-head test against a storage interaction. Identification rests on 120 monthly observations, since these regressors are system-wide. Price suppression is strongest in hydro-abundant months, at approximately NZ$5.8/MWh per 10% relative VRE increase, and attenuates toward zero as the thermal share rises, consistent with water-value pricing. A forward test on Jan 2025 to May 2026 data, which postdate model development, confirms the interaction’s predictive value (forward RMSE improvement +33%, wild cluster bootstrap p = 0.047). Re-estimation on the 2011–12 panel returns a weakly identified, directionally opposite interaction (bootstrap two-sided p = 0.053). The validated state dependence therefore characterises the 2015–24 market regime rather than a structurally invariant relationship.

  • Open Access

    Comparative Analysis and Selection of Maximum Power Point Tracking Techniques with Predictive Power Flow Control for Harmonic Mitigation in Renewable-Integrated Smart Grids

    by Shanikumar Vaidya, Krishnamachar Prasad, Jeff Kilby

    The integration of renewable energy into smart grids is beneficial for a sustainable future and the environment. Still, it has challenges such as energy optimisation, environmental conditions and power quality degradation. Existing Maximum Power Point Tracking (MPPT) techniques often focus on tracking efficiency under steady-state conditions, ignoring the impact of real-time variation in environmental conditions and load. The predictive power flow control (PPFC) algorithm is available with one or more fixed MPPT algorithms. No studies have reported on how the choice of MPPT affects PPFC harmonic mitigation. This paper addresses both concerns through a systematic comparative analysis of MPPT techniques integrated with a PPFC method to mitigate harmonics in renewable-integrated smart grid systems. To address this research gap, a comprehensive comparative analysis of various MPPT techniques, such as Perturb and Observe (P&O), Incremental Conductance (INC), Fuzzy Logic Control (FLC), and hybrid Machine Learning (ML) techniques, integrated with PPFC to achieve effective harmonic mitigation in a smart grid environment is conducted. A 3 MW solar farm integrated with a battery storage system is modelled in MTALB/Simulink 2025b under real-time varying conditions, such as environmental and load variations over time in Auckland, New Zealand. The study focuses on key performance parameters such as total harmonic distortion (THD), power loss, stability and efficiency. The Adaptive Neuro-Fuzzy Inference System (ANFIS)-based MPPT controller, integrated with forecast-based power flow control, achieved overall performance by providing higher efficiency (97.5%), effective harmonic mitigation, and enhanced system stability under the nonlinear behaviour of the photovoltaic system. The proposed ANFIS-based system ensured a stable and smooth power output under varying environmental conditions, outperforming conventional and other intelligent MPPT techniques.

  • Open Access

    A Review of Energy Storage Economics, Load Forecasting, and Hybrid Control Strategies for AC Microgrids in Modern Power Systems

    by Yaser Ibrahim Rashed Alshdaifat, Krishnamachar Prasad, Jeff Kilby

    As power grids transition towards highly renewable generation on a global scale, maintaining dynamic stability is becoming a major challenge. Replacing traditional synchronous generators with inverter-based renewables strips the grid of rotational inertia, leaving active distribution networks highly vulnerable to frequency deviations and voltage spikes. To avoid expensive poles and wires upgrades, Battery Energy Storage Systems (BESS) are increasingly being deployed as Non-Network Solutions (NNS). However, the current literature reveals a distinct gap between the macro-scale economic planning of these storage assets and the micro-scale dynamic control actually required to keep the grid resilient. To address this gap, this review proposes a multi-layer deterministic synthesis framework that links physical renewable modelling, degradation-aware techno-economic planning, deterministic forecasting, and EMS dispatch through offline time-domain control validation for AC-microgrid energy storage integration. The research examines how advanced central control units within battery management systems can rigorously and jointly estimate State of Charge (SoC) and State of Energy (SoE) to ensure accurate grid-aware dispatch. Furthermore, the study explores the integration of degradation-aware economic modelling in HOMER Pro with dynamic transient control in MATLAB/Simulink R2025b, driven by hybrid metaheuristic optimization algorithms like Grey Wolf Optimizer (GWO) and Particle Swarm Optimization (PSO). This analysis demonstrates that integrating energy storage must be treated as a tightly coupled multidimensional optimization problem to successfully deliver the secure and sustainable infrastructure needed to solve the modern energy trilemma.


  • Open Access

    Intelligent Hybrid Solar–Wind Off-Grid (Standalone) Electric Vehicle Charging Stations for Remote Areas and Developing Countries: A Comprehensive Review

    by Onyeka Ibezim, Krishnamachar Prasad, Jeff Kilby

    Off-grid electric vehicle (EV) charging infrastructure powered by hybrid solar–wind systems address critical adoption barriers in developing countries, where grid unreliability and sparse charging networks constrain transportation electrification. Despite growing research interest, no comprehensive review has systematically synthesized the interplay between hybrid renewable architectures, intelligent energy management strategies, and techno-economic viability specifically for off-grid EV charging in resource-constrained settings. This systematic review applies the PRISMA methodology to analyze 94 peer-reviewed publications (2013–2026), examining system architectures, intelligent control strategies, power electronics, battery storage, and deployment frameworks for standalone hybrid solar–wind EV charging stations. Key findings indicate that hybrid solar–wind configurations achieve 30–50% reductions in battery storage requirements and 15–25% lower levelized cost of energy (LCOE) (USD 0.08–0.15/kWh) compared with single-source systems, driven by diurnal and seasonal resource complementarity. Among intelligent control methods, the two-stage distributionally robust optimization (TSDRO) framework emerges as the most promising for data-scarce environments, outperforming conventional deterministic and stochastic approaches by 10–20% in managing renewable intermittency without requiring precise probability distributions. Wide-bandgap power semiconductors (SiC, GaN) enable 96–98% conversion efficiency, while lithium iron phosphate batteries provide 3000–5000 cycle lifetimes suited to tropical operating conditions. Critical gaps remain with field validation still predominantly simulation based, long-term operational data exceeding 24 months on equipment degradation and climate resilience are scarce, and scalable financing models for developing country contexts require further development. Nigeria is presented as an exemplar deployment context, with transferable insights for sub-Saharan Africa, South Asia, and Southeast Asia.


  • Open Access

    Grid Efficiency and Power Quality Improvements in Rooftop Solar EV Charging Stations Using Smart Battery Management and Advanced DC-to-DC Converters

    by Shanikumar Vaidya, Krishnamachar Prasad, Jeff Kilby

    The adoption of electric vehicles (EVs) is a promising strategy for reducing emissions and promoting sustainable mobility. The increasing adoption of EVs has created a demand for efficient and sustainable charging infrastructure. The integration of rooftop solar-powered EV charging stations into distribution networks is a promising solution for reducing carbon emissions and improving grid efficiency. This integration also introduces challenges, such as power quality issues, grid instability, and the impact of environmental factors on solar generation. This study proposes a novel system that integrates a smart control algorithm for a central battery management system (CBMS) with advanced bidirectional DC-DC converters for optimised power distribution. Unlike existing systems that focus on individual components, this study combines real-time environmental monitoring with adaptive power management algorithms to handle variations in generation owing to solar irradiance, temperature, and shading, and ensure maximum power harvesting. This study also presents the role of the DC-to-DC converter integrated with a smart charging control and CBMS in smart grid-enabled EV charging station. The proposed system was validated using MATLAB 2025b Simulink simulations. This study demonstrates an improvement in overall grid stability and highlights the potential of DC-DC converter technologies for smart grid applications and decarbonisation efforts.


  • Open Access

    Deep Learning-Based Channel Estimation Techniques Using IEEE 802.11p Protocol, Limitations of IEEE 802.11p and Future Directions of IEEE 802.11bd: A Review

    by Saveeta Bai, Jeff Kilby, Krishnamachar Prasad

    Vehicular communication networks demand highly efficient and accurate channel estimation to ensure reliable data exchange in high mobility scenarios. The IEEE 802.11p standard is widely regarded as the foundation of the Vehicle-to-Vehicle (V2V) communication channel; however, it is constrained by limited pilot resources and a fixed pilot structure, which degrade the performance and effectiveness of traditional estimation techniques, particularly in dynamic environments. Recent advances in deep learning offer significant potential for addressing these issues by improving estimation accuracy and modelling complex channel dynamics. Though deep learning-based methods introduce trade-offs in computational complexity and accuracy, these are crucial constraints in latency-sensitive V2V scenarios. This article presents a comprehensive review of deep learning-based channel estimation techniques, analysing methods for the IEEE 802.11p standard and critically examining their limitations in both classical and deep learning-based approaches. Additionally, the article highlights improvements introduced by IEEE 802.11bd, which features an enhanced pilot structure and advanced modulation schemes, providing a more robust framework for adaptive, efficient channel estimation. By identifying future research pathways that balance delay, complexity, and accuracy, an intelligent and effective transportation system can be established.


  • Open Access

    Optimal Energy Storage Management in Grid-Connected PV-Battery Systems Based on GWO-PSO

    by Yaser Ibrahim Rashed Alshdaifat, Krishnamachar Prasad, Zaid Hamid Abdulabbas Al-Tameemi, Jeff Kilby, Tek Tjing Lie

    Grid-connected photovoltaic (PV)–battery systems require advanced control to maintain stable operation, efficient energy exchange, and minimal conversion losses under variable generation and load conditions. This study proposes a dual-loop Energy Management System (EMS) integrated with a Hybrid Grey Wolf Optimizer–Particle Swarm Optimization (GWO–PSO) algorithm for coordinated control of a low-voltage PV–battery–grid system (380 V AC, ≈800 V DC bus). The hybrid optimizer was chosen due to the limitations of standalone GWO and PSO methods, which frequently experience slow convergence and local stagnation; the integrated GWO–PSO strategy enhances both exploration and exploitation during the real-time adjustment of PI controller gains. The rapid inner loop effectively balances instantaneous power among the PV, battery, and grid, while the outer optimization loop aims to minimize the ITAE criterion to enhance transient response. Simulation outcomes validate stable DC-bus voltage regulation, quicker transitions between power import and export, and prompt power balance with deviations maintained below 2.5%, signifying reduced converter losses and improved power-sharing efficiency. The battery’s state of charge is sustained within the range of 20–80%, ensuring safe operational conditions. The proposed hybrid EMS offers faster convergence, smoother power regulation, and enhanced dynamic stability compared to standalone metaheuristic controllers, establishing it as an effective and reliable solution for grid-connected PV–battery systems.