NPNiels Posthuma

Niels Posthuma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Niels Posthuma has a total of 89 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analysis of Trap-Induced Dynamic Degradation in AlGaN/GaN Gated-Edge Termination Schottky Barrier Diodes Under Continuous Switching Operation

    by Zhen-Hong Huang, Benoit Bakeroot, Olga Syshchyk, Ching-Chia Lee, Yu-Teng Tso, Pei-Jung Wang, Dirk Wellekens, Niels Posthuma, Sheng-Shiuan Yeh, Stefaan Decoutere, et al.

  • Local characterization and current-voltage modelling of conductive threading dislocations in AlGaN/GaN heterostructures grown on Si(111) and engineered poly-AlN substrates

    by Albert Minj, Andrea Pondini, Han Han, Benjamin Vanhove, Anurag Vohra, Erik Rosseel, Karen Geens, Sujit Kumar, Niels Posthuma, Stefaan Decoutere, et al.

    AlGaN/GaN based high-electron-mobility transistors utilize the excellent electronic and transport properties of Gallium Nitride and related compounds, making them highly sought after for high-power and high-frequency applications. However, threading dislocations that form during the GaN epitaxy growth on lattice mismatched Si substrates impact the device performance and reliability by causing an early breakdown and carrier trapping phenomena. For applications exceeding 1 kV, the growth of thick GaN stacks on 200 mm Si wafers introduces significant strain, compromising substrate integrity. This has triggered the development of engineered substrates for GaN epitaxy and the re-evaluation of the subsequent epitaxial growth. In this study, we have investigated the current transport properties of detrimental dislocations in AlGaN/GaN heterostructures grown on AlN engineered substrates (commonly referred to as QST ® ) and on conventional Si (111) substrates. This study has been achieved by developing a correlative nanoscale characterization methodology implementing conductive atomic force microscopy, cathodoluminescence microscopy, and electron channelling contrast imaging and revisiting dislocation-sensitive etching behavior. This allowed us to observe vertical conduction paths manifesting themselves only in certain types of dislocations and to analyse the associated current transport mechanisms. Our modelling of the local current-voltage characterization on such dislocations, which are only 1% of the total dislocation density, directly associate them to the conduction mechanism via Poole-Frenkel emission in the reverse bias and variable range hopping in the reverse bias.


  • Open Access

    Correlation of heat transport mechanism and structural properties of GaN high electron mobility transistors

    by Lisa Mitterhuber, Barbara Kosednar-Legenstein, Anurag Vohra, Matteo Borga, Niels Posthuma, Elke Kraker

    Grain sizes, impurities, and layer thicknesses in the nm-range affect the heat transport and, hence, hinder proper heat dissipation of GaN-based devices. To obtain a clear picture of heat dissipation, the mechanisms of heat transport must be linked to the structural properties of the nitride-based materials in the device. In this paper, a systematic investigation of the typical layers of GaN high-electron mobility transistor stacks was conducted by time-domain thermoreflectance analysis and Raman measurements. The analyzed layers are the AlN nucleation layer, the Al0.3Ga0.7N transition layer, the AlGaN/AlN superlattice, the C-doped GaN back-barrier, and the uid GaN layer. The results were interpreted using the Born–van Karman model, including the suppression function approach to describe the governing heat transport mechanisms. Investigation of this AlN nucleation layer showed that its phonon scattering is dominated by impurity and grain boundary scattering. The Al0.3Ga0.7N transition layer was shown to have a reduced thermal conductivity not only due to alloy scattering but also because of grain boundary scattering. The AlGaN/AlN superlattice showed a thermal conductivity lower than the Al0.3Ga0.7N transition layer, especially at higher temperatures (7.2 ± 0.2 W/mK vs 14.1 ± 0.4 W/mK at 300 °C). Caused by the enhanced AlGaN/AlN interface density, the thermal conductance was found to be 2 GW/m2 K. The AlGaN/AlN superlattice indicated an anisotropic thermal transport with a factor of ∼1.5. The C-doped GaN layers were analyzed in terms of their size-dictated thermal conductivity, resulting in a reduction of ∼66% from 1 μm to 250 nm at 30 °C. Raman spectroscopy revealed that the thicker the GaN layer, the higher the compressive stress in GaN, which additionally results in a higher thermal transport. The investigations of the heat transport depending on the structural properties enabled an accurate determination of the thermal conductivity of the layer stack. These thermal conductivities served as input parameters for 3D simulation to extract the temperature, in terms of the thermal resistance, of such high-electron mobility transistor stacks. This simulation shows the importance of the GaN layer in terms of thermal management. This work uncovers the thermal transport in GaN-based transistor stacks with the aim to improving the thermal design.


  • Open Access

    P-GaN Gate HEMTs: A Solution to Improve the High-Temperature Gate Lifetime

    by A. N. Tallarico, M. Millesimo, M. Borga, B. Bakeroot, N. Posthuma, T. Cosnier, S. Decoutere, E. Sangiorgi, C. Fiegna

    In this letter, we report an approach to improve the forward bias gate reliability of Schottky gate p-GaN HEMTs. In particular, a gate layout solution, namely Gate Within Active Area (GWA), aimed at improving the high-temperature time to failure (TTF), is proposed and validated. This solution allows to avoid the exposure of the gate finger (p-GaN/metal) to the nitrogen-implantation needed for termination and isolation purposes. GWA devices feature a significantly improved gate reliability at high temperature with respect to the reference ones, under both DC and pulsed stress tests. Finally, it is demonstrated that the Schottky gate p-GaN HEMTs show a positive temperature-dependent gate TTF in a range up to $150~^{\circ }$ C, confirming the crucial role of impact ionization on the gate failure.


  • Toward Understanding the Failure Mechanism in p-GaN Gate HEMTs Operating in Reverse Conduction Diode Mode

    by Wei-Syuan Lin, Benoit Bakeroot, Zhen-Hong Huang, Ting-Chun Lo, Matteo Borga, Dirk Wellekens, Niels Posthuma, Stefaan Decoutere, Tian-Li Wu

    In this study, we investigate the reverse conduction diode mode failure mechanism in p-GaN gate high electron mobility transistors (HEMTs) using TCAD simulations and emission microscopy (EMMI). First, we observe a significant increase in gate leakage current when $\textit{V}_{\text{DS}}$ is swept to $-$ 15 V while $\textit{V}_{\text{GS}}$ $=$ 0 V, indicating gate breakdown occurring with sufficient negative bias. Second, TCAD simulations are conducted to gain further insight into the failure locations and mechanisms. The simulations reveal high electric fields in the Schottky junction close to the interface between the metal and the p-GaN. This finding suggests that the gate region is likely the location leading to increased gate current and breakdown during the reverse conducting operation of the p-GaN gate HEMT. Lastly, EMMI measurements are performed on a device exhibiting high gate leakage current during reverse conduction diode mode operation. The EMMI results show bright spots in the gate region, which align with the failure location identified by the TCAD simulations. These results emphasize the importance of optimizing the Schottky/p-GaN junction to enhance the robustness of the p-GaN gate HEMT under reverse conduction diode mode operation.


  • Top Cited Papers

    1.2 kV Enhancement-Mode p-GaN Gate HEMTs on 200 mm Engineered Substrates

    by S. Kumar, K. Geens, A. Vohra, D. Wellekens, D. Cingu, E. Fabris, T. Cosnier, H. Hahn, B. Bakeroot, N. Posthuma, et al.

    This letter experimentally demonstrates 1.2 kV normally-off p-GaN gate lateral high-electron-mobility transistors (HEMTs) on 200 mm diameter engineered substrates. The fabricated p-GaN gate HEMT with optimum gate-drain spacing exhibits a threshold voltage (V th ) of 3.2 V, an ON/OFF ratio of 10 8 , low specific ON-resistance (R on,sp ) of 5.8 mΩ-cm 2 and hard breakdown voltage (V bd ) at 1800 V. Optimized devices also show good wafer scale uniformity (σ Ron = 1.2%) for the evaluated electrical parameters and passed on-wafer high temperature gate bias (HTGB) and reverse bias stress tests without device failures.


  • GaN HEMT with p-Type Schottky Gate: A Case Study of TCAD Modeling of the Gate Leakage Current

    by Franco Ercolano, Andrea Natale Tallarico, Maurizio Millesimo, Elena Gnani, Susanna Reggiani, Claudio Fiegna, Matteo Borga, Niels Posthuma, Benoit Bakeroot

  • Open Access

    Role of the GaN-on-Si Epi-Stack on ΔR ON Caused by Back-Gating Stress

    by M. Millesimo, M. Borga, L. Valentini, B. Bakeroot, N. Posthuma, A. Vohra, S. Decoutere, C. Fiegna, A. N. Tallarico

    This article reports an in-depth analysis of the ON-resistance drift ( $\Delta \textit{R}_{\biosc{on}}\text{)}$ induced by storage/release mechanisms occurring in the buffer of GaN-on-Si power devices. The role of both stress condition (bias, temperature, and stress time) and buffer’s epi-stack composition on $\Delta \textit{R}_{\biosc{on}}$ has been analyzed by means of back-gating current deep-level transient spectroscopy (I-DLTS). The results reveal two competing mechanisms: 1) a faster one related to acceptor defects and sensitive to the thickness of the carbon-doped GaN back-barrier (C:GaN) and superlattice (SL) layers and 2) a slower one ascribed to hole accumulation at the C:GaN/SL interface, independent of the thickness of the epi-stack. The temperature, stress bias, and stress time dependence of such mechanisms, often overlapping, have been investigated by adopting a genetic algorithm.


  • Using Gate Leakage Conduction to Understand Positive Gate Bias Induced Threshold Voltage Shift in p-GaN Gate HEMTs

    by Shun-Wei Tang, Benoit Bakeroot, Zhen-Hong Huang, Szu-Chia Chen, Wei-Syuan Lin, Ting-Chun Lo, Matteo Borga, Dirk Wellekens, Niels Posthuma, Stefaan Decoutere, et al.

    In this work, the gate current characteristics are investigated to explain the threshold voltage shift in AlGaN/GaN high electron mobility transistors (HEMTs) with a p-GaN gate. First, the intrinsic gate current conduction mechanisms are identified: in the low bias range (2.5 V $ < {V}_{G} < $ 4 V), thermionic emission (TE) dominates in the AlGaN/GaN region, whereas in a higher bias range (4 V $ < {V}_{G} < $ 7 V) trap-assisted tunneling (TAT) is occurring in the Schottky/p-GaN region. Secondly, the threshold voltage shift of the stress phase is evaluated by applying a positive gate bias for various stress times. A consistent trap level with an activation energy of ${E}_{A}\sim $ 0.6 eV is found. In conclusion, a physical model explaining the negative ${V}_{\text {TH}}$ shift by considering TAT via hole transport is proposed.


  • The Role of Frequency and Duty Cycle on the Gate Reliability of p-GaN HEMTs

    by M. Millesimo, M. Borga, B. Bakeroot, N. Posthuma, S. Decoutere, E. Sangiorgi, C. Fiegna, A. N. Tallarico

    In this letter, we present an extensive analysis on the role of both switching frequency (ranging from 100 kHz to 1 MHz) and duty cycle (from 10% to 90%) on the time-dependent gate breakdown of high electron mobility transistors (HEMTs) with Schottky metal to p-GaN gate. More specifically, results show how the gate lifetime of GaN HEMTs increases by reducing the frequency and the duty cycle of the stressing gate signal (V G ). Such behavior is ascribed to the OFF-time, which is responsible to alter the electrostatic potential in the p-GaN layer during the rising phases of V G (from OFF- to ON-state). Findings of this analysis are useful both for further technology improvement and for GaN-based power circuit designers.