Hidefumi Matsui
Hidefumi Matsui has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Akira Notake
Tokyo Electron Ltd.,SDC AI Development Department,Sapporo,Hokkaido,Japan,060-0003
5 shared publications - Tsuyoshi Moriya
Tokyo Electron Ltd.,Advanced Data Planning Department,Tokyo,Japan,107-6325
5 shared publications - Yasuteru Shigeta
University of Tsukuba
5 shared publications - Yosuke Harashima
Nara Institute of Science and Technology
5 shared publications - Zeyuan Ni
State Key Laboratory for Mesoscopic Physics and Department of Physics Peking University Beijing 100871 P. R. China
5 shared publications - Akira Uedono
University of Tsukuba
4 shared publications
Latest Publications
- Open Access
- 26 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (26)
Finite temperature effects on the structural stability of Si-doped HfO2 using first-principles calculations
The structural stabilities of the monoclinic and tetragonal phases of Si-doped HfO2 at finite temperatures were analyzed using a computational scheme to assess the effects of impurity doping. We proposed a method that the finite temperature effects, i.e., lattice vibration and impurity configuration effects, are considered. The results show that 6% Si doping stabilizes the tetragonal phase at room temperature, although a higher concentration of Si is required to stabilize the tetragonal phase at zero temperature. These data indicate that lattice vibration and impurity configuration effects are important factors determining structural stability at finite temperatures.
- 26 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (26)
Open AccessFinite temperature effects on the structural stability of Si-doped HfO2 using first-principles calculations
The structural stabilities of the monoclinic and tetragonal phases of Si-doped HfO2 at finite temperatures were analyzed using a computational scheme to assess the effects of impurity doping. We proposed a method that the finite temperature effects, i.e., lattice vibration and impurity configuration effects, are considered. The results show that 6% Si doping stabilizes the tetragonal phase at room temperature, although a higher concentration of Si is required to stabilize the tetragonal phase at zero temperature. These data indicate that lattice vibration and impurity configuration effects are important factors determining structural stability at finite temperatures.
- 10 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 36 (4) , 543-546
Systematic Search for Stabilizing Dopants in ZrO₂ and HfO₂ Using First-Principles Calculations
In this study, we performed a systematic search for dopants to stabilize the tetragonal structure of HfO2 and ZrO2 by using high-throughput first-principles calculations. By exhaustively exploring all possible impurity configurations for over 12,000 systems, we obtained the expected most stable doping status for various dopants at different doping levels. The stabilization effect of dopants are investigated and compared. The results show that Si or Ge significantly stabilize the tetragonal phase.
- 10 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 36 (4) , 543-546
Systematic Search for Stabilizing Dopants in ZrO₂ and HfO₂ Using First-Principles Calculations
In this study, we performed a systematic search for dopants to stabilize the tetragonal structure of HfO2 and ZrO2 by using high-throughput first-principles calculations. By exhaustively exploring all possible impurity configurations for over 12,000 systems, we obtained the expected most stable doping status for various dopants at different doping levels. The stabilization effect of dopants are investigated and compared. The results show that Si or Ge significantly stabilize the tetragonal phase.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Systematic Search for Stabilizing Dopants in ZrO2 and HfO2 Using First-Principles Calculations
In this study, we performed systematic search for dopants to stabilize the tetragonal structure of HfO 2 and ZrO 2 by using first-principles calculations. Whole impurity configurations within the supercell, more than 12,000 systems, are examined and the most stable configurations are assumed to be realized. We reveal the contributions of the dopants to the structural stability of tetragonal phase, and that Si or Ge significantly stabilize the tetragonal phase.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Systematic Search for Stabilizing Dopants in ZrO2 and HfO2 Using First-Principles Calculations
In this study, we performed systematic search for dopants to stabilize the tetragonal structure of HfO 2 and ZrO 2 by using first-principles calculations. Whole impurity configurations within the supercell, more than 12,000 systems, are examined and the most stable configurations are assumed to be realized. We reveal the contributions of the dopants to the structural stability of tetragonal phase, and that Si or Ge significantly stabilize the tetragonal phase.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Impact of Cation Vacancies on Leakage Current on TiN/ZrO2/TiN Capacitors Studied by Positron Annihilation
TiN/ZrO 2 /TiN capacitors were characterized using XRD, STEM, EDX, and monoenergetic positron beams. For an as-deposited ZrO 2 layer, an interlayer was formed in the layer. After post-deposition annealing at 550°C, the width of the interlayer expanded. The major vacancy-type defects in the ZrO 2 layer were determined to be a Zr-vacancy coupled with oxygen vacancies by the positron annihilation technique. After annealing, the size of these vacancies increased. The presence of the cation vacancies and their complexes in the ZrO 2 layer suggests that not only oxygen vacancies but also such defects play a role in the defect formation of the ZrO 2 layer and affect its electrical properties.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Impact of Cation Vacancies on Leakage Current on TiN/ZrO2/TiN Capacitors Studied by Positron Annihilation
TiN/ZrO 2 /TiN capacitors were characterized using XRD, STEM, EDX, and monoenergetic positron beams. For an as-deposited ZrO 2 layer, an interlayer was formed in the layer. After post-deposition annealing at 550°C, the width of the interlayer expanded. The major vacancy-type defects in the ZrO 2 layer were determined to be a Zr-vacancy coupled with oxygen vacancies by the positron annihilation technique. After annealing, the size of these vacancies increased. The presence of the cation vacancies and their complexes in the ZrO 2 layer suggests that not only oxygen vacancies but also such defects play a role in the defect formation of the ZrO 2 layer and affect its electrical properties.
- 26 October 2022
- Published by Elsevier in Thin Solid Films
- Vol. 762
Vacancy-type defects in TiN/ZrO2/TiN capacitors probed by monoenergetic positron beams
- 26 October 2022
- Published by Elsevier in Thin Solid Films
- Vol. 762
Vacancy-type defects in TiN/ZrO2/TiN capacitors probed by monoenergetic positron beams
- Open Access
- 24 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 32 (4) , 444-449
Materials Informatics for Process and Material Co-Optimization
In semiconductor manufacturing, fabrication processes and their materials should be properly co-optimized to achieve required processing results within reasonable development duration and acceptable cost. Unfortunately, it is a very time-consuming procedure, because the number of possible combinations of process/material candidates is very large. Here, we develop a methodology for co-optimization of processes and their materials. We successfully constructed a prediction model for dry-etching of high-k materials (R2 = 0.65). Also, it was proven that considering both the materials and processes is needed for accurate prediction of etching rates. By trying only <0.00001% of all possible process/material candidates with this model and Bayesian optimization, we can find new combinations of gasses and their processes for more than 100 times higher etching rates than that with a traditional gas/process condition. Furthermore, we discussed that accurate prediction can be made by using a combination of the Bayesian optimization with LASSO and materials knowledge from related scientific papers. Future work will focus on validating the versatility of our methodology by applying it to other development items.
- 24 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 32 (4) , 444-449
Open AccessMaterials Informatics for Process and Material Co-Optimization
In semiconductor manufacturing, fabrication processes and their materials should be properly co-optimized to achieve required processing results within reasonable development duration and acceptable cost. Unfortunately, it is a very time-consuming procedure, because the number of possible combinations of process/material candidates is very large. Here, we develop a methodology for co-optimization of processes and their materials. We successfully constructed a prediction model for dry-etching of high-k materials (R2 = 0.65). Also, it was proven that considering both the materials and processes is needed for accurate prediction of etching rates. By trying only <0.00001% of all possible process/material candidates with this model and Bayesian optimization, we can find new combinations of gasses and their processes for more than 100 times higher etching rates than that with a traditional gas/process condition. Furthermore, we discussed that accurate prediction can be made by using a combination of the Bayesian optimization with LASSO and materials knowledge from related scientific papers. Future work will focus on validating the versatility of our methodology by applying it to other development items.
- 1 December 2008
- Published by Elsevier in Fusion Engineering and Design
- Vol. 83 (7-9) , 1007-1014
Latest design of liquid lithium target in IFMIF
- 1 December 2008
- Published by Elsevier in Fusion Engineering and Design
- Vol. 83 (7-9) , 1007-1014
Latest design of liquid lithium target in IFMIF