Ibrahim Yaichi
Ibrahim Yaichi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Kouddad Elhachemi
University of Ahmad Draia
2 shared publications - Mohammed Aoumri
University of Ahmad Draia
2 shared publications - Patrice Wira
University of Haute Alsace
2 shared publications Abdelhafid Semmah
1 shared publication- Abdelhafid Semmah
Department of Electrical Engineering, Faculty of Electrical Engineering, Djillali Liabes University, University campus, P. O. B. 89, 022000 Sidi Bel Abbes, Algeria
1 shared publication - Abdelkader Harrouz
University of Ahmed Draia
1 shared publication
Latest Publications
- Open Access
- 1 June 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 17 (2)
Neuro-fuzzy control on a permanent magnet synchronous generator integrated in a wind system
This paper introduces a control strategy for a synchronous generator in a wind energy system using an adaptive neuro-fuzzy approach. The suggested controller, based on neuro-fuzzy logic (NFLC), is meant to govern a permanent magnet synchronous generator (PMSG) often utilized in wind power applications. The generator's output voltage phase, phase current, reactive power, active power, angular velocity, and DC voltage are all under control. The adaptive neuro-fuzzy controller efficiently stabilizes all variables in a brief amount of time, according to simulation results. The effectiveness and robust performance of the suggested control system are verified by a number of simulated scenarios. The resilience of fuzzy logic control (FLC) and NFLC systems was compared. The study carefully tested the performance of both control techniques under varied operating settings and disturbance situations to determine their relative stability, flexibility, and efficacy in sustaining desired system behavior.
- 1 June 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 17 (2)
Open AccessNeuro-fuzzy control on a permanent magnet synchronous generator integrated in a wind system
This paper introduces a control strategy for a synchronous generator in a wind energy system using an adaptive neuro-fuzzy approach. The suggested controller, based on neuro-fuzzy logic (NFLC), is meant to govern a permanent magnet synchronous generator (PMSG) often utilized in wind power applications. The generator's output voltage phase, phase current, reactive power, active power, angular velocity, and DC voltage are all under control. The adaptive neuro-fuzzy controller efficiently stabilizes all variables in a brief amount of time, according to simulation results. The effectiveness and robust performance of the suggested control system are verified by a number of simulated scenarios. The resilience of fuzzy logic control (FLC) and NFLC systems was compared. The study carefully tested the performance of both control techniques under varied operating settings and disturbance situations to determine their relative stability, flexibility, and efficacy in sustaining desired system behavior.
- Open Access
- 14 May 2026
- Published by Atlantis Press SARL
- p. 362-369
Design and Analysis of a Photonic Crystal-Based Optical Sensor for Magnetic Field Detection
- 14 May 2026
- Published by Atlantis Press SARL
- p. 362-369
Open AccessDesign and Analysis of a Photonic Crystal-Based Optical Sensor for Magnetic Field Detection
- Open Access
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (4) , 2711-2720
Robust sliding mode control of a DFIG based on the SVM strategy
This paper presents a direct power control (DPC) method for a doubly-fed induction generator (DFIG) used in variable-speed wind power systems, combining sliding mode control (SMC) with space vector modulation (SVM). The proposed SMC-based DPC with SVM (SMC-DPC_SVM) achieves decoupled power control through flux orientation, enhancing performance through the robustness of SMC and the precision of SVM. Simulation results demonstrate the effectiveness of this control strategy. The conventional direct power control (C-DPC) approach delivers fast and robust power response, and a comparative analysis between C-DPC and the proposed SMC-DPC_SVM strategy highlights the advantages of the latter. Robustness was evaluated under varying machine parameters, confirming system stability. The proposed control method was implemented and validated using MATLAB/Simulink, achieving a total harmonic distortion (THD) of less than 5%, indicating high-quality power delivery to the electrical grid.
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (4) , 2711-2720
Open AccessRobust sliding mode control of a DFIG based on the SVM strategy
This paper presents a direct power control (DPC) method for a doubly-fed induction generator (DFIG) used in variable-speed wind power systems, combining sliding mode control (SMC) with space vector modulation (SVM). The proposed SMC-based DPC with SVM (SMC-DPC_SVM) achieves decoupled power control through flux orientation, enhancing performance through the robustness of SMC and the precision of SVM. Simulation results demonstrate the effectiveness of this control strategy. The conventional direct power control (C-DPC) approach delivers fast and robust power response, and a comparative analysis between C-DPC and the proposed SMC-DPC_SVM strategy highlights the advantages of the latter. Robustness was evaluated under varying machine parameters, confirming system stability. The proposed control method was implemented and validated using MATLAB/Simulink, achieving a total harmonic distortion (THD) of less than 5%, indicating high-quality power delivery to the electrical grid.
- 6 November 2019
- Published by International Information and Engineering Technology Association in European Journal of Electrical Engineering
- Vol. 21 (5) , 457-464
Direct Power Control of a Wind Turbine Based on Doubly Fed Induction Generator
- 6 November 2019
- Published by International Information and Engineering Technology Association in European Journal of Electrical Engineering
- Vol. 21 (5) , 457-464
Direct Power Control of a Wind Turbine Based on Doubly Fed Induction Generator
- Open Access
- 4 November 2019
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Electrical Engineering and Computer Science
- Vol. 64 (1) , 87-96
Control of Doubly Fed Induction Generator with Maximum Power Point Tracking for Variable Speed Wind Energy Conversion Systems
In this paper, a Direct Power Control (DPC) based on the switching table and Artificial Neural Network-based Maximum Power Point Tracking control for variable speed Wind Energy Conversion Systems (WECS) is proposed. In the context of wind energy exploitation, we are interested in this work to improve the performance of the wind generator by controlling the continuation of the Maximum Power Point Tracking (MPPT) using the Artificial Neural Network (ANN). The results obtained show the interest of such control in this system. The proposed Direct Power Control strategy produces a fast and robust power response, also the grid side is controlled by Direct Power Control based a grid voltage position to ensure a constant DC- link voltage. The THD of the current injected into the electric grid for the Wind Energy Conversion Systems with Direct Power Control is shown in this paper, the THD is lower than the 5 % limit imposed by IEEE STANDARDS ASSOCIATION. This approach Direct Power Control is validated using the Matlab/Simulink software and simulation results can prove the excellent performance of this control as improving power quality and stability of wind turbine.
- 4 November 2019
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Electrical Engineering and Computer Science
- Vol. 64 (1) , 87-96
Open AccessControl of Doubly Fed Induction Generator with Maximum Power Point Tracking for Variable Speed Wind Energy Conversion Systems
In this paper, a Direct Power Control (DPC) based on the switching table and Artificial Neural Network-based Maximum Power Point Tracking control for variable speed Wind Energy Conversion Systems (WECS) is proposed. In the context of wind energy exploitation, we are interested in this work to improve the performance of the wind generator by controlling the continuation of the Maximum Power Point Tracking (MPPT) using the Artificial Neural Network (ANN). The results obtained show the interest of such control in this system. The proposed Direct Power Control strategy produces a fast and robust power response, also the grid side is controlled by Direct Power Control based a grid voltage position to ensure a constant DC- link voltage. The THD of the current injected into the electric grid for the Wind Energy Conversion Systems with Direct Power Control is shown in this paper, the THD is lower than the 5 % limit imposed by IEEE STANDARDS ASSOCIATION. This approach Direct Power Control is validated using the Matlab/Simulink software and simulation results can prove the excellent performance of this control as improving power quality and stability of wind turbine.