Johannes G. M. Barten
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Johannes G. M. Barten has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
Laurens N. Ganzeveld
Meteorology and Air Quality Section, Wageningen University, Wageningen, The Netherlands
6 shared publications- Maarten Krol
Institute for Marine and Atmospheric Research Utrecht Utrecht University Utrecht The Netherlands
6 shared publications - Gert-Jan Steeneveld
Meteorology and Air Quality Section, Wageningen University, Wageningen, 6708PB, the Netherlands
3 shared publications - Amy R. Macfarlane
WSL Institute for Snow and Avalanche Research SLF, Davos, Switzerland
2 shared publications - Auke J. Visser
European Centre for Medium-Range Weather Forecasts, Bonn, Germany
2 shared publications - Bart Kruijt
Earth Systems and Global Change Group, Wageningen University, Wageningen, The Netherlands
2 shared publications
Latest Publications
- Open Access
- 10 April 2026
- Published by Copernicus GmbH
Supplementary material to "The ICOS Ecosystem Station Loobos: a pine forest site exposed to atmospheric pollution"
- 10 April 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "The ICOS Ecosystem Station Loobos: a pine forest site exposed to atmospheric pollution"
- Open Access
- 10 April 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-34
The ICOS Ecosystem Station Loobos: a pine forest site exposed to atmospheric pollution
The Loobos Ecosystem Station (ICOS: NL-Loo) is in a pine forest on sandy soil, the most dominant forest type in the Netherlands. The station was first built in 1995 and the first atmospheric flux measurements were taken in 1997. The station was one of the first in EuroFlux and FLUXNET. Between 2021 and 2023, the station was rebuilt to meet the ICOS standards as an Ecosystem Class 2 station. The initial purpose of the station was to measure fluxes of heat, water and carbon dioxide. Over time, interest has increased in better understanding the forest water use and ecosystem dynamics and its interaction with air quality. This has resulted in additional concentration and flux measurements of ozone and volatile organic compounds. In the near future, we intend to include measurements of nitrogen species (ammonia and nitrogen oxides) to exploit Loobos’ unique location downwind of major anthropogenic emission hotspots. Documenting the instrumentation and exploring the quality of the data is important to understand the observational data. This paper therefore describes the station in terms of geography, ecosystem and instrumentation.
- 10 April 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-34
Open AccessThe ICOS Ecosystem Station Loobos: a pine forest site exposed to atmospheric pollution
The Loobos Ecosystem Station (ICOS: NL-Loo) is in a pine forest on sandy soil, the most dominant forest type in the Netherlands. The station was first built in 1995 and the first atmospheric flux measurements were taken in 1997. The station was one of the first in EuroFlux and FLUXNET. Between 2021 and 2023, the station was rebuilt to meet the ICOS standards as an Ecosystem Class 2 station. The initial purpose of the station was to measure fluxes of heat, water and carbon dioxide. Over time, interest has increased in better understanding the forest water use and ecosystem dynamics and its interaction with air quality. This has resulted in additional concentration and flux measurements of ozone and volatile organic compounds. In the near future, we intend to include measurements of nitrogen species (ammonia and nitrogen oxides) to exploit Loobos’ unique location downwind of major anthropogenic emission hotspots. Documenting the instrumentation and exploring the quality of the data is important to understand the observational data. This paper therefore describes the station in terms of geography, ecosystem and instrumentation.
- Open Access
- 6 December 2024
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 258, 441-472
Iodine speciation in snow during the MOSAiC expedition and its implications for Arctic iodine emissions
Photochemical release of iodine from snow has been suggested as a source of reactive iodine to the Arctic atmosphere, however understanding of the underlying mechanism and potential source strength is hindered by a lack of measurements of iodine concentration and speciation in snow. Moreover, the origin of snow iodine is also unknown. Here, we report iodine speciation measurements in Arctic snow on sea ice at a range of snow depths from 177 samples, representing 80 sampling events, from December 2019 to October 2020 collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition. We demonstrate that while there appears to be a source of iodine, in particular iodate, to the base of the snow over first year ice, this does not influence iodine concentration in the surface snow. There is instead evidence of a top-down source of iodine, potentially from iodine-enriched marine aerosol, as well as some evidence for episodic influx of iodate with dust. The potential for photochemical release of molecular iodine (I2) from iodide in surface snow was investigated, and it was demonstrated that this could provide an iodine emission flux to the Arctic atmosphere comparable to oceanic fluxes. Knowledge of the prevalence and speciation of iodine in Arctic snow will contribute to better understanding of its contribution to observed concentrations of polar iodine oxide (IO), and hence its contribution to the depletion of tropospheric ozone in the Arctic.
- 6 December 2024
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 258, 441-472
Open AccessIodine speciation in snow during the MOSAiC expedition and its implications for Arctic iodine emissions
Photochemical release of iodine from snow has been suggested as a source of reactive iodine to the Arctic atmosphere, however understanding of the underlying mechanism and potential source strength is hindered by a lack of measurements of iodine concentration and speciation in snow. Moreover, the origin of snow iodine is also unknown. Here, we report iodine speciation measurements in Arctic snow on sea ice at a range of snow depths from 177 samples, representing 80 sampling events, from December 2019 to October 2020 collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition. We demonstrate that while there appears to be a source of iodine, in particular iodate, to the base of the snow over first year ice, this does not influence iodine concentration in the surface snow. There is instead evidence of a top-down source of iodine, potentially from iodine-enriched marine aerosol, as well as some evidence for episodic influx of iodate with dust. The potential for photochemical release of molecular iodine (I2) from iodide in surface snow was investigated, and it was demonstrated that this could provide an iodine emission flux to the Arctic atmosphere comparable to oceanic fluxes. Knowledge of the prevalence and speciation of iodine in Arctic snow will contribute to better understanding of its contribution to observed concentrations of polar iodine oxide (IO), and hence its contribution to the depletion of tropospheric ozone in the Arctic.
- Open Access
- 31 October 2024
- Published by Springer Nature in Research Square
Warm and moist air intrusions drive black carbon deposition and accelerate central Arctic snowmelt
In the central Arctic, warm and moist air intrusions (WAMIs) are increasingly prevalent during winter and spring, significantly impacting the near-surface energy budget. This study investigates WAMI-induced transport and wet deposition of black carbon (BC) and its subsequent influence on snow properties and melting. Using a modeling approach combined with extensive observational data from the 2019–2020 Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, we document several episodes of elevated BC wet deposition during winter and spring (Nov–Apr). These events, driven by WAMI-transported pollution and moisture, result in an average 41% increase in BC wet deposition compared to typical winter/spring conditions. Furthermore, this enhanced BC deposition contributes to increased solar energy absorption (+3.4–4.6 W/m2 on average) and accelerated snowpack melt rate (+24–36%) during the subsequent summer. Despite their episodic occurrence (only 15% of the time), this study underscores the critical role of WAMIs in shaping the central Arctic environment and emphasizes the importance of the BC snow albedo effect. Our findings highlight the need for further investigation into the broader climatic impacts of WAMI-induced pollution transport in the Arctic.
- 31 October 2024
- Published by Springer Nature in Research Square
Open AccessWarm and moist air intrusions drive black carbon deposition and accelerate central Arctic snowmelt
In the central Arctic, warm and moist air intrusions (WAMIs) are increasingly prevalent during winter and spring, significantly impacting the near-surface energy budget. This study investigates WAMI-induced transport and wet deposition of black carbon (BC) and its subsequent influence on snow properties and melting. Using a modeling approach combined with extensive observational data from the 2019–2020 Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, we document several episodes of elevated BC wet deposition during winter and spring (Nov–Apr). These events, driven by WAMI-transported pollution and moisture, result in an average 41% increase in BC wet deposition compared to typical winter/spring conditions. Furthermore, this enhanced BC deposition contributes to increased solar energy absorption (+3.4–4.6 W/m2 on average) and accelerated snowpack melt rate (+24–36%) during the subsequent summer. Despite their episodic occurrence (only 15% of the time), this study underscores the critical role of WAMIs in shaping the central Arctic environment and emphasizes the importance of the BC snow albedo effect. Our findings highlight the need for further investigation into the broader climatic impacts of WAMI-induced pollution transport in the Arctic.
- Open Access
- 15 February 2023
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 11 (1)
Low ozone dry deposition rates to sea ice during the MOSAiC field campaign: Implications for the Arctic boundary layer ozone budget
Dry deposition to the surface is one of the main removal pathways of tropospheric ozone (O3). We quantified for the first time the impact of O3 deposition to the Arctic sea ice on the planetary boundary layer (PBL) O3 concentration and budget using year-round flux and concentration observations from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) campaign and simulations with a single-column atmospheric chemistry and meteorological model (SCM). Based on eddy-covariance O3 surface flux observations, we find a median surface resistance on the order of 20,000 s m−1, resulting in a dry deposition velocity of approximately 0.005 cm s−1. This surface resistance is up to an order of magnitude larger than traditionally used values in many atmospheric chemistry and transport models. The SCM is able to accurately represent the yearly cycle, with maxima above 40 ppb in the winter and minima around 15 ppb at the end of summer. However, the observed springtime ozone depletion events are not captured by the SCM. In winter, the modelled PBL O3 budget is governed by dry deposition at the surface mostly compensated by downward turbulent transport of O3 towards the surface. Advection, which is accounted for implicitly by nudging to reanalysis data, poses a substantial, mostly negative, contribution to the simulated PBL O3 budget in summer. During episodes with low wind speed (−1) and shallow PBL (−1. Our study highlights the importance of an accurate description of dry deposition to Arctic sea ice in models to quantify the current and future O3 sink in the Arctic, impacting the tropospheric O3 budget, which has been modified in the last century largely due to anthropogenic activities.
- 15 February 2023
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 11 (1)
Open AccessLow ozone dry deposition rates to sea ice during the MOSAiC field campaign: Implications for the Arctic boundary layer ozone budget
Dry deposition to the surface is one of the main removal pathways of tropospheric ozone (O3). We quantified for the first time the impact of O3 deposition to the Arctic sea ice on the planetary boundary layer (PBL) O3 concentration and budget using year-round flux and concentration observations from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) campaign and simulations with a single-column atmospheric chemistry and meteorological model (SCM). Based on eddy-covariance O3 surface flux observations, we find a median surface resistance on the order of 20,000 s m−1, resulting in a dry deposition velocity of approximately 0.005 cm s−1. This surface resistance is up to an order of magnitude larger than traditionally used values in many atmospheric chemistry and transport models. The SCM is able to accurately represent the yearly cycle, with maxima above 40 ppb in the winter and minima around 15 ppb at the end of summer. However, the observed springtime ozone depletion events are not captured by the SCM. In winter, the modelled PBL O3 budget is governed by dry deposition at the surface mostly compensated by downward turbulent transport of O3 towards the surface. Advection, which is accounted for implicitly by nudging to reanalysis data, poses a substantial, mostly negative, contribution to the simulated PBL O3 budget in summer. During episodes with low wind speed (−1) and shallow PBL (−1. Our study highlights the importance of an accurate description of dry deposition to Arctic sea ice in models to quantify the current and future O3 sink in the Arctic, impacting the tropospheric O3 budget, which has been modified in the last century largely due to anthropogenic activities.
- Open Access
- 7 July 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (13) , 10229-10248
Role of oceanic ozone deposition in explaining temporal variability in surface ozone at High Arctic sites
Dry deposition is an important removal mechanism for tropospheric ozone (O3). Currently, O3 deposition to oceans in atmospheric chemistry and transport models (ACTMs) is generally represented using constant surface uptake resistances. This occurs despite the role of solubility, waterside turbulence and O3 reacting with ocean water reactants such as iodide resulting in substantial spatiotemporal variability in O3 deposition and concentrations in marine boundary layers. We hypothesize that O3 deposition to the Arctic Ocean, having a relatively low reactivity, is overestimated in current models with consequences for the tropospheric concentrations, lifetime and long-range transport of O3. We investigate the impact of the representation of oceanic O3 deposition to the simulated magnitude and spatiotemporal variability in Arctic surface O3. We have integrated the Coupled Ocean-Atmosphere Response Experiment Gas transfer algorithm (COAREG) into the mesoscale meteorology and atmospheric chemistry model Polar-WRF-Chem (WRF) which introduces a dependence of O3 deposition on physical and biogeochemical drivers of oceanic O3 deposition. Also, we reduced the O3 deposition to sea ice and snow. Here, we evaluate WRF and CAMS reanalysis data against hourly averaged surface O3 observations at 25 sites (latitudes > 60∘ N). This is the first time such a coupled modeling system has been evaluated against hourly observations at pan-Arctic sites to study the sensitivity of the magnitude and temporal variability in Arctic surface O3 on the deposition scheme. We find that it is important to nudge WRF to the ECMWF ERA5 reanalysis data to ensure adequate meteorological conditions to evaluate surface O3. We show that the mechanistic representation of O3 deposition over oceans and reduced snow/ice deposition improves simulated Arctic O3 mixing ratios both in magnitude and temporal variability compared to the constant resistance approach. Using COAREG, O3 deposition velocities are in the order of 0.01 cm s−1 compared to ∼ 0.05 cm s−1 in the constant resistance approach. The simulated monthly mean spatial variability in the mechanistic approach (0.01 to 0.018 cm s−1) expresses the sensitivity to chemical enhancement with dissolved iodide, whereas the temporal variability (up to ±20 % around the mean) expresses mainly differences in waterside turbulent transport. The mean bias for six sites above 70∘ N reduced from −3.8 to 0.3 ppb with the revision to ocean and snow/ice deposition. Our study confirms that O3 deposition to high-latitude oceans and snow/ice is generally overestimated in ACTMs. We recommend that a mechanistic representation of oceanic O3 deposition is preferred in ACTMs to improve the modeled Arctic surface O3 concentrations in terms of magnitude and temporal variability.
- 7 July 2021
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 21 (13) , 10229-10248
Open AccessRole of oceanic ozone deposition in explaining temporal variability in surface ozone at High Arctic sites
Dry deposition is an important removal mechanism for tropospheric ozone (O3). Currently, O3 deposition to oceans in atmospheric chemistry and transport models (ACTMs) is generally represented using constant surface uptake resistances. This occurs despite the role of solubility, waterside turbulence and O3 reacting with ocean water reactants such as iodide resulting in substantial spatiotemporal variability in O3 deposition and concentrations in marine boundary layers. We hypothesize that O3 deposition to the Arctic Ocean, having a relatively low reactivity, is overestimated in current models with consequences for the tropospheric concentrations, lifetime and long-range transport of O3. We investigate the impact of the representation of oceanic O3 deposition to the simulated magnitude and spatiotemporal variability in Arctic surface O3. We have integrated the Coupled Ocean-Atmosphere Response Experiment Gas transfer algorithm (COAREG) into the mesoscale meteorology and atmospheric chemistry model Polar-WRF-Chem (WRF) which introduces a dependence of O3 deposition on physical and biogeochemical drivers of oceanic O3 deposition. Also, we reduced the O3 deposition to sea ice and snow. Here, we evaluate WRF and CAMS reanalysis data against hourly averaged surface O3 observations at 25 sites (latitudes > 60∘ N). This is the first time such a coupled modeling system has been evaluated against hourly observations at pan-Arctic sites to study the sensitivity of the magnitude and temporal variability in Arctic surface O3 on the deposition scheme. We find that it is important to nudge WRF to the ECMWF ERA5 reanalysis data to ensure adequate meteorological conditions to evaluate surface O3. We show that the mechanistic representation of O3 deposition over oceans and reduced snow/ice deposition improves simulated Arctic O3 mixing ratios both in magnitude and temporal variability compared to the constant resistance approach. Using COAREG, O3 deposition velocities are in the order of 0.01 cm s−1 compared to ∼ 0.05 cm s−1 in the constant resistance approach. The simulated monthly mean spatial variability in the mechanistic approach (0.01 to 0.018 cm s−1) expresses the sensitivity to chemical enhancement with dissolved iodide, whereas the temporal variability (up to ±20 % around the mean) expresses mainly differences in waterside turbulent transport. The mean bias for six sites above 70∘ N reduced from −3.8 to 0.3 ppb with the revision to ocean and snow/ice deposition. Our study confirms that O3 deposition to high-latitude oceans and snow/ice is generally overestimated in ACTMs. We recommend that a mechanistic representation of oceanic O3 deposition is preferred in ACTMs to improve the modeled Arctic surface O3 concentrations in terms of magnitude and temporal variability.
- Open Access
- 29 October 2020
- Published by Copernicus GmbH in EGUsphere
- Vol. 2020, 1-28
Role of oceanic ozone deposition in explaining short-term variability of Arctic surface ozone
Dry deposition is an important removal mechanism for tropospheric ozone (O3). Currently, O3 deposition to oceans in atmospheric chemistry and transport models (ACTMs) is generally represented using constant surface uptake resistances. This is despite the fact that considering the role of solubility, waterside turbulence and O3 reacting with ocean water reactants such as iodide and dissolved organic matter results in substantial spatiotemporal variability in O3 deposition and concentrations in marine boundary layers. We hypothesize that O3 deposition to the cold Arctic ocean, with relatively low reactivity, is also overestimated in current models with consequences for background concentrations, lifetime of O3 and long-range transport of O3. In this study, we investigate the role of the representation of oceanic O3 deposition to the simulated magnitude and spatiotemporal variability in Arctic surface O3. This study also serves as a preparatory study to understand the year-round Arctic O3 concentration and deposition flux measurements as part of the MOSAiC field campaign. Furthermore, it is also important to enhance our understanding and quantification of Arctic ocean-atmosphere exchange of O3 and other climate-active trace gases given the anticipated opening of the Arctic ocean. We have coupled the Coupled Ocean-Atmosphere Response Experiment Gas transfer algorithm (COAREG) to the mesoscale meteorology and atmospheric chemistry model Polar-WRF-Chem (WRF) and introduced a dependence of O3 deposition on ocean waterside turbulent mixing conditions and biogeochemical composition. We have also reduced the O3 deposition to sea ice and snow. Here, we evaluate the performance of WRF and the CAMS reanalysis data against hourly-averaged surface O3 observations at 25 sites (latitudes > 60º N) including the ASCOS campaign observations. This is the first time such a coupled modelling system has been evaluated against hourly observations at Pan-Arctic sites to study the sensitivity of the deposition scheme to the magnitude and short-term temporal variability in Arctic surface O3. We also analyze the impact of nudging WRF to the synoptic conditions from the ECMWF ERA5 reanalysis data on simulated Arctic meteorology and comparison of observed and simulated O3 concentrations. We show that the more mechanistic representation of O3 deposition over oceans and reduced snow/ice deposition improves simulated Arctic O3 mixing ratios both in terms of magnitude but also regarding observed temporal variability. Using the newly implemented approach, O3 deposition velocities have been simulated in the order of 0.01 cm s−1 compared to ~0.05 cm s−1 in the constant surface uptake resistance approach. The simulated spatial variability in the mechanistic approach (0.01 to 0.018 cm s−1) expresses the sensitivity to chemical enhancement with dissolved iodide whereas the temporal variability (up to ±20 % around the mean) expresses differences in waterside turbulent transport. The bias for all observational sites above 70º N reduced from −7.7 ppb to 0.3 ppb with nudging and the revision to ocean and snow/ice deposition. Our study confirms that O3 deposition to oceans and snow/ice is overestimated in current models. We recommend that a mechanistic representation of oceanic O3 deposition is used in ACTMs to improve the representation of Arctic surface O3 concentrations in terms of magnitude and short-term temporal variability. The revised ocean-atmosphere exchange representation can be further refined using the MOSAiC flux measurements as well as complementary observations such as sea ice and ocean water iodide concentrations.
- 29 October 2020
- Published by Copernicus GmbH in EGUsphere
- Vol. 2020, 1-28
Open AccessRole of oceanic ozone deposition in explaining short-term variability of Arctic surface ozone
Dry deposition is an important removal mechanism for tropospheric ozone (O3). Currently, O3 deposition to oceans in atmospheric chemistry and transport models (ACTMs) is generally represented using constant surface uptake resistances. This is despite the fact that considering the role of solubility, waterside turbulence and O3 reacting with ocean water reactants such as iodide and dissolved organic matter results in substantial spatiotemporal variability in O3 deposition and concentrations in marine boundary layers. We hypothesize that O3 deposition to the cold Arctic ocean, with relatively low reactivity, is also overestimated in current models with consequences for background concentrations, lifetime of O3 and long-range transport of O3. In this study, we investigate the role of the representation of oceanic O3 deposition to the simulated magnitude and spatiotemporal variability in Arctic surface O3. This study also serves as a preparatory study to understand the year-round Arctic O3 concentration and deposition flux measurements as part of the MOSAiC field campaign. Furthermore, it is also important to enhance our understanding and quantification of Arctic ocean-atmosphere exchange of O3 and other climate-active trace gases given the anticipated opening of the Arctic ocean. We have coupled the Coupled Ocean-Atmosphere Response Experiment Gas transfer algorithm (COAREG) to the mesoscale meteorology and atmospheric chemistry model Polar-WRF-Chem (WRF) and introduced a dependence of O3 deposition on ocean waterside turbulent mixing conditions and biogeochemical composition. We have also reduced the O3 deposition to sea ice and snow. Here, we evaluate the performance of WRF and the CAMS reanalysis data against hourly-averaged surface O3 observations at 25 sites (latitudes > 60º N) including the ASCOS campaign observations. This is the first time such a coupled modelling system has been evaluated against hourly observations at Pan-Arctic sites to study the sensitivity of the deposition scheme to the magnitude and short-term temporal variability in Arctic surface O3. We also analyze the impact of nudging WRF to the synoptic conditions from the ECMWF ERA5 reanalysis data on simulated Arctic meteorology and comparison of observed and simulated O3 concentrations. We show that the more mechanistic representation of O3 deposition over oceans and reduced snow/ice deposition improves simulated Arctic O3 mixing ratios both in terms of magnitude but also regarding observed temporal variability. Using the newly implemented approach, O3 deposition velocities have been simulated in the order of 0.01 cm s−1 compared to ~0.05 cm s−1 in the constant surface uptake resistance approach. The simulated spatial variability in the mechanistic approach (0.01 to 0.018 cm s−1) expresses the sensitivity to chemical enhancement with dissolved iodide whereas the temporal variability (up to ±20 % around the mean) expresses differences in waterside turbulent transport. The bias for all observational sites above 70º N reduced from −7.7 ppb to 0.3 ppb with nudging and the revision to ocean and snow/ice deposition. Our study confirms that O3 deposition to oceans and snow/ice is overestimated in current models. We recommend that a mechanistic representation of oceanic O3 deposition is used in ACTMs to improve the representation of Arctic surface O3 concentrations in terms of magnitude and short-term temporal variability. The revised ocean-atmosphere exchange representation can be further refined using the MOSAiC flux measurements as well as complementary observations such as sea ice and ocean water iodide concentrations.
- Open Access
- 12 August 2020
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 20 (15) , 9441-9458
Evaluation of nitrogen oxides (NOx) sources and sinks and ozone production in Colombia and surrounding areas
In Colombia, industrialization and a shift towards intensified agriculture have led to increased emissions of air pollutants. However, the baseline state of air quality in Colombia is relatively unknown. In this study we aim to assess the baseline state of air quality in Colombia with a focus on the spatial and temporal variability in emissions and atmospheric burden of nitrogen oxides (NOx = NO + NO2) and evaluate surface NOx, ozone (O3) and carbon monoxide (CO) mixing ratios. We quantify the magnitude and spatial distribution of the four major NOx sources (lightning, anthropogenic activities, soil biogenic emissions and biomass burning) by integrating global NOx emission inventories into the mesoscale meteorology and atmospheric chemistry model, namely Weather Research and Forecasting (WRF) coupled with Chemistry (collectively WRF-Chem), at a similar resolution (∼25 km) to the Emission Database for Global Atmospheric Research (EDGAR) anthropogenic emission inventory and the Ozone Monitoring Instrument (OMI) remote sensing observations. The model indicates the largest contribution by lightning emissions (1258 Gg N yr−1), even after already significantly reducing the emissions, followed by anthropogenic (933 Gg N yr−1), soil biogenic (187 Gg N yr−1) and biomass burning emissions (104 Gg N yr−1). The comparison with OMI remote sensing observations indicated a mean bias of tropospheric NO2 columns over the whole domain (WRF-Chem minus OMI) of 0.02 (90 % CI: [−0.43, 0.70]) ×1015 molecules cm−2, which is 2 columns are overestimated and underestimated in regions where lightning and biomass burning emissions dominate, respectively. WRF-Chem was unable to capture NOx and CO urban pollutant mixing ratios, neither in timing nor in magnitude. Yet, WRF-Chem was able to simulate the urban diurnal cycle of O3 satisfactorily but with a systematic overestimation of 10 parts per billion (ppb) due to the equally large underestimation of NO mixing ratios and, consequently, titration. This indicates that these city environments are in the NOx-saturated regime with frequent O3 titration. We conducted sensitivity experiments with an online meteorology–chemistry single-column model (SCM) to evaluate how WRF-Chem subgrid-scale-enhanced emissions could explain an improved representation of the observed O3, CO and NOx diurnal cycles. Interestingly, the SCM simulation, showing especially a shallower nocturnal inversion layer, results in a better representation of the observed diurnal cycle of urban pollutant mixing ratios without an enhancement in emissions. This stresses that, besides application of higher-resolution emission inventories and model experiments, the diurnal cycle in boundary layer dynamics (and advection) should be critically evaluated in models such as WRF-Chem to assess urban air quality. Overall, we present a concise method to quantify air quality in regions with limited surface measurements by integrating in situ and remote sensing observations. This study identifies four distinctly different source regions and shows their interannual and seasonal variability during the last 1.5 decades. It serves as a base to assess scenarios of future air quality in Colombia or similar regions with contrasting emission regimes, complex terrain and a limited air quality monitoring network.
- 12 August 2020
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 20 (15) , 9441-9458
Open AccessEvaluation of nitrogen oxides (NOx) sources and sinks and ozone production in Colombia and surrounding areas
In Colombia, industrialization and a shift towards intensified agriculture have led to increased emissions of air pollutants. However, the baseline state of air quality in Colombia is relatively unknown. In this study we aim to assess the baseline state of air quality in Colombia with a focus on the spatial and temporal variability in emissions and atmospheric burden of nitrogen oxides (NOx = NO + NO2) and evaluate surface NOx, ozone (O3) and carbon monoxide (CO) mixing ratios. We quantify the magnitude and spatial distribution of the four major NOx sources (lightning, anthropogenic activities, soil biogenic emissions and biomass burning) by integrating global NOx emission inventories into the mesoscale meteorology and atmospheric chemistry model, namely Weather Research and Forecasting (WRF) coupled with Chemistry (collectively WRF-Chem), at a similar resolution (∼25 km) to the Emission Database for Global Atmospheric Research (EDGAR) anthropogenic emission inventory and the Ozone Monitoring Instrument (OMI) remote sensing observations. The model indicates the largest contribution by lightning emissions (1258 Gg N yr−1), even after already significantly reducing the emissions, followed by anthropogenic (933 Gg N yr−1), soil biogenic (187 Gg N yr−1) and biomass burning emissions (104 Gg N yr−1). The comparison with OMI remote sensing observations indicated a mean bias of tropospheric NO2 columns over the whole domain (WRF-Chem minus OMI) of 0.02 (90 % CI: [−0.43, 0.70]) ×1015 molecules cm−2, which is 2 columns are overestimated and underestimated in regions where lightning and biomass burning emissions dominate, respectively. WRF-Chem was unable to capture NOx and CO urban pollutant mixing ratios, neither in timing nor in magnitude. Yet, WRF-Chem was able to simulate the urban diurnal cycle of O3 satisfactorily but with a systematic overestimation of 10 parts per billion (ppb) due to the equally large underestimation of NO mixing ratios and, consequently, titration. This indicates that these city environments are in the NOx-saturated regime with frequent O3 titration. We conducted sensitivity experiments with an online meteorology–chemistry single-column model (SCM) to evaluate how WRF-Chem subgrid-scale-enhanced emissions could explain an improved representation of the observed O3, CO and NOx diurnal cycles. Interestingly, the SCM simulation, showing especially a shallower nocturnal inversion layer, results in a better representation of the observed diurnal cycle of urban pollutant mixing ratios without an enhancement in emissions. This stresses that, besides application of higher-resolution emission inventories and model experiments, the diurnal cycle in boundary layer dynamics (and advection) should be critically evaluated in models such as WRF-Chem to assess urban air quality. Overall, we present a concise method to quantify air quality in regions with limited surface measurements by integrating in situ and remote sensing observations. This study identifies four distinctly different source regions and shows their interannual and seasonal variability during the last 1.5 decades. It serves as a base to assess scenarios of future air quality in Colombia or similar regions with contrasting emission regimes, complex terrain and a limited air quality monitoring network.
- Open Access
- 4 November 2019
- Published by Copernicus GmbH in EGUsphere
- Vol. 2019, 1-30
Evaluation of nitrogen oxides sources and sinks and ozone production in Colombia and surrounding areas
In Colombia, industrialization and a shift towards intensified agriculture have led to increased emissions of air pollutants. However, the baseline state of air quality in Colombia is relatively unknown. In this study we aim to assess the baseline state of air quality in Colombia with a focus on the spatial and temporal variability in emissions and atmospheric burden of nitrogen oxides (NOx = NO + NO2) and evaluate surface NOx, ozone (O3) and carbon monoxide (CO) mixing ratios. We quantify the magnitude and spatial distribution of the four major NOx sources (lightning, anthropogenic activities, soil biogenic emissions and biomass burning), by integrating global NOx emission inventories into the mesoscale meteorology and atmospheric chemistry model WRF-Chem. The comparison with in situ measurements is bound to urban areas whereas the use of remote sensing data allows to also evaluate air quality in remote regions. WRF-Chem was set up for a domain centered over Colombia with a similar resolution as OMI observed NO2 vertical columns as well as the EDGAR anthropogenic emission inventory, both providing information on a ~20 km resolution. However, this apparently poses a challenge regarding comparison with these urban observations. Air mass factors were recalculated based on the vertical distribution of NO2 within WRF-Chem, with respect to the coarse (1° x 1°) a priori profiles. The main reason for recalculation is a more consistent satellite-model comparison but it also reduced the mean bias. WRF-Chem was, on average, able to provide good estimates for tropospheric NO2 columns with an averaged difference of 0.02 x 1015 molecules cm-2, which is < 5 % of the mean column. However, the simulated NO2 columns are overestimated in regions with abundant modeled lightning emissions and underestimated in regions where biomass burning emissions dominate in the model. This result reflects the high contribution by lightning emissions (1258 Gg N yr-1) and the low contribution by biomass burning emissions (104 Gg N yr-1) to total NOx emissions within the WRF-Chem domain. WRF-Chem was unable to capture NOx and CO urban pollutant mixing ratios, both in timing and magnitude. Yet, WRF-Chem was able to simulate the urban diurnal cycle of O3 satisfactory but with a systematic overestimation of 10 ppb due to the equally large underestimation of NO mixing ratios and, consequently, titration. This indicates that these city environments are in the NOx saturated regime with frequent O3 titration. We also applied an online meteorology-chemistry single column model (SCM) to evaluate how enhanced emissions and different representation of advection and mixing conditions could explain an improved representation of the observed O3 and NOx diurnal cycles. The SCM appears to indeed better represent the observed diurnal cycle of urban pollutant mixing ratios. But, interestingly, this result did not require an enhancement in the emissions, indicating that the role of boundary layer dynamics and advection should be considered besides the use of high-resolution models and emissions inventories to realistically simulate urban air quality. Results obtained in this study provide insight in the magnitude, distribution and temporal evolution of different sources of pollution in Colombia and its surrounding territories. This study not only identifies different source regions, but also shows the interannual variability of these sources during the last one and a half decade using satellite data. Furthermore, this study shows that relatively coarse anthropogenic emission inventories can give reasonable results regarding the diurnal cycle of urban pollutant mixing ratios with a careful consideration of advection and mixing conditions. It serves as a base to assess scenarios of future air quality in Colombia, or similar regions with distinct contrasting emission regimes and a limited air quality monitoring network, as a function of further industrialization and land use changes.
- 4 November 2019
- Published by Copernicus GmbH in EGUsphere
- Vol. 2019, 1-30
Open AccessEvaluation of nitrogen oxides sources and sinks and ozone production in Colombia and surrounding areas
In Colombia, industrialization and a shift towards intensified agriculture have led to increased emissions of air pollutants. However, the baseline state of air quality in Colombia is relatively unknown. In this study we aim to assess the baseline state of air quality in Colombia with a focus on the spatial and temporal variability in emissions and atmospheric burden of nitrogen oxides (NOx = NO + NO2) and evaluate surface NOx, ozone (O3) and carbon monoxide (CO) mixing ratios. We quantify the magnitude and spatial distribution of the four major NOx sources (lightning, anthropogenic activities, soil biogenic emissions and biomass burning), by integrating global NOx emission inventories into the mesoscale meteorology and atmospheric chemistry model WRF-Chem. The comparison with in situ measurements is bound to urban areas whereas the use of remote sensing data allows to also evaluate air quality in remote regions. WRF-Chem was set up for a domain centered over Colombia with a similar resolution as OMI observed NO2 vertical columns as well as the EDGAR anthropogenic emission inventory, both providing information on a ~20 km resolution. However, this apparently poses a challenge regarding comparison with these urban observations. Air mass factors were recalculated based on the vertical distribution of NO2 within WRF-Chem, with respect to the coarse (1° x 1°) a priori profiles. The main reason for recalculation is a more consistent satellite-model comparison but it also reduced the mean bias. WRF-Chem was, on average, able to provide good estimates for tropospheric NO2 columns with an averaged difference of 0.02 x 1015 molecules cm-2, which is < 5 % of the mean column. However, the simulated NO2 columns are overestimated in regions with abundant modeled lightning emissions and underestimated in regions where biomass burning emissions dominate in the model. This result reflects the high contribution by lightning emissions (1258 Gg N yr-1) and the low contribution by biomass burning emissions (104 Gg N yr-1) to total NOx emissions within the WRF-Chem domain. WRF-Chem was unable to capture NOx and CO urban pollutant mixing ratios, both in timing and magnitude. Yet, WRF-Chem was able to simulate the urban diurnal cycle of O3 satisfactory but with a systematic overestimation of 10 ppb due to the equally large underestimation of NO mixing ratios and, consequently, titration. This indicates that these city environments are in the NOx saturated regime with frequent O3 titration. We also applied an online meteorology-chemistry single column model (SCM) to evaluate how enhanced emissions and different representation of advection and mixing conditions could explain an improved representation of the observed O3 and NOx diurnal cycles. The SCM appears to indeed better represent the observed diurnal cycle of urban pollutant mixing ratios. But, interestingly, this result did not require an enhancement in the emissions, indicating that the role of boundary layer dynamics and advection should be considered besides the use of high-resolution models and emissions inventories to realistically simulate urban air quality. Results obtained in this study provide insight in the magnitude, distribution and temporal evolution of different sources of pollution in Colombia and its surrounding territories. This study not only identifies different source regions, but also shows the interannual variability of these sources during the last one and a half decade using satellite data. Furthermore, this study shows that relatively coarse anthropogenic emission inventories can give reasonable results regarding the diurnal cycle of urban pollutant mixing ratios with a careful consideration of advection and mixing conditions. It serves as a base to assess scenarios of future air quality in Colombia, or similar regions with distinct contrasting emission regimes and a limited air quality monitoring network, as a function of further industrialization and land use changes.