BTBich Hoang Thi

Bich Hoang Thi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bich Hoang Thi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Chemical Compositions of Essential Oil of Agarwood (Aquilaria crassna) Harvested in Phu Quoc Island, Vietnam

    by Tran Quoc Toan, Thi Thu Thuy Dinh, Thi Tuyen Tran, Thi Bich Hoang, Quoc Long Pham, Quyet Chien Nguyen, Nguyen Ngoc Quy, Thanh Viet Nguyen

    The importance of natural products derived from Agarwood species is increasingly emphasized in the production of perfumery or cosmetic products made on Agarwood species. On the other hand, due to the predominant amount of aromatic compounds in essential oils, frankincense essential oil is increasingly popular with high economic value. Therefore, in this study, we focused on the extraction process of essential oils and evaluated the chemical composition present in the essential oils by the GC-MS method. Differences in the composition of essential oils between natural and artificial agarwood may be due to species, habitat conditions, climate, geographical conditions, and extraction methods in different regions. Specifically, volatile components in essential oils were identified as Neopetasone (14.43%); Dihydroagarofuran-15-al (9.20%); Jinko-cramol (5.02%); Valeriano (4.94%); Agarofuran (8.02%); Dihydrokaranone (3.25%), Valenca-1 (10), 8-dien-11-ol (5.95%) and Selina-4,11-dien-14-al (2.73%), contribute to determining the main aroma in Agarwood essential oil.


  • Open Access

    Fabrication of a Low-Cost Microfluidic Device for High-Throughput Drug Testing on Static and Dynamic Cancer Spheroid Culture Models

    by Tung Dinh Do, Uyen Thu Pham, Linh Phuong Nguyen, Trang Minh Nguyen, Cuong Nguyen Bui, Susan Oliver, Phuong Pham, Toan Quoc Tran, Bich Thi Hoang, Minh Thi Hong Pham, et al.

    Drug development is a complex and expensive process from new drug discovery to product approval. Most drug screening and testing rely on in vitro 2D cell culture models; however, they generally lack in vivo tissue microarchitecture and physiological functionality. Therefore, many researchers have used engineering methods, such as microfluidic devices, to culture 3D cells in dynamic conditions. In this study, a simple and low-cost microfluidic device was fabricated using Poly Methyl Methacrylate (PMMA), a widely available material, and the total cost of the completed device was USD 17.75. Dynamic and static cell culture examinations were applied to monitor the growth of 3D cells. α-MG-loaded GA liposomes were used as the drug to test cell viability in 3D cancer spheroids. Two cell culture conditions (i.e., static and dynamic) were also used in drug testing to simulate the effect of flow on drug cytotoxicity. Results from all assays showed that with the velocity of 0.005 mL/min, cell viability was significantly impaired to nearly 30% after 72 h in a dynamic culture. This device is expected to improve in vitro testing models, reduce and eliminate unsuitable compounds, and select more accurate combinations for in vivo testing.


  • Open Access

    Chemical Composition and Biological Activities of Essential Oils of Four Asarum Species Growing in Vietnam

    by Pham Thi Hong Minh, Nguyen Thuong Tuan, Nguyen Thi Hong Van, Hoang Thi Bich, Do Tien Lam

    The essential oils (EOs) of the aerial parts of four Asarum species (A. geophilum, A. yentunensis, A. splendens and A. cordifolium) were isolated by steam distillation and analyzed by the GC/MS method. The A. cordifolium EO contains 33 constituents with the main component being elemicine (77.20%). The A. geophilum EO was contains 49 constituents with the main components being determined as 9-epi-(E)-caryophyllene (18.43%), eudesm-7(11)-en-4-ol (13.41%), β-caryophyllene (8.05%) and phytol (7.23%). The A. yentunensis EO contains 26 constituents with the main components being safrole (64.74%) and sesquicineole (15.34%). The EO of A. splendens contains 41 constituents with the main components being 9-epi-(E)-caryophyllene (15.76%), eudesm-7(11)-en-4-ol (14.21%), β-caryophyllene (9.52%) and trans-bicyclogermacrene (7.50%). For antimicrobial activity, the A. yentunensis EO exhibited the highest inhibition activity against Staphylococcus aureus and the A. cordifolium EO against Bacillus subtillis (MIC values of 100 μg/mL). For antioxidant activity, the A. geophilum EO showed the highest potential with an SC (%) value of 63.34 ± 1.0%, corresponding to an SC50 value of 28.57 µg/mL. For anti-inflammatory activity, the A. splendens EO exhibited the highest potential with an IC50 value of 21.68 µg/mL, corresponding to an inhibition rate of NO production of 69.58 ± 1.3% and the percentage of cell life was 81.85 ± 0.9%.


  • Open Access

    Optimization of Total Saponin Extraction from Polyscias fruticosa Roots Using the Ultrasonic-Assisted Method and Response Surface Methodology

    by Le Trung Khoang, Hoang Thi Thu Huyen, Huynh Van Chung, Le Xuan Duy, Tran Quoc Toan, Hoang Thi Bich, Pham Thi Hong Minh, Dung Thuy Nguyen Pham, Tran Thien Hien

    Polyscias fruticosa (L.) Harms is commonly used for medicinal purposes in Vietnam. In traditional medicine, the plant is used to cure ischemia, reduce inflammation, and increase cerebral blood circulation. Triterpene saponins are the major chemical constituents found in the roots of P. fruticosa. This compound exhibited a broad spectrum of biological effects, including lowering blood sugar, suppressing tumor growth and inflammation. This study focused on optimizing the process of total saponins extraction from P. fruticosa roots using the ultrasonic-assisted extraction (UAE) method, ethanol solvent and response surface methodology, and Box–Behnken design model, then evaluating the cytotoxic effect against some cancer cell lines. The results showed that under the optimal conditions, including an extraction temperature of 60 °C and ultrasonic power of 185 W in 65 min, the maximum extraction yield and total saponin content were 14.51 ± 1.15% and 41.24 ± 1.68 mg/g, respectively. Moreover, the saponin extract had cytotoxic effects against A549, HepG2, PC-3, and Hela. The results of this study confirmed that triterpene saponin is an important chemical component which is present in a high content in P. fruticosa roots and gives rise to significant biological activities. In addition, UAE can be used as a highly efficient method for triterpene saponins extraction from P. fruticosa roots.


  • Open Access

    Optimization of Microwave-Assisted Extraction Process of Callicarpa candicans (Burm. f.) Hochr Essential Oil and Its Inhibitory Properties against Some Bacteria and Cancer Cell Lines

    by Quoc Toan Tran, Thu Le Vu Thi, Tien Lam Do, Hong Minh Pham Thi, Bich Hoang Thi, Quang Truyen Chu, Phuong Thao Lai Phuong, Huu Nghi Do, Hoai Thu Hoang Than, Thu Thuy Ta Thi, et al.

    Callicarpa candicans (Burm. f.) Hochr. (Callicarpa cana L.) is a medicinal plant that is distributed mainly in the tropics and subtropics of Asia and finds a wide range of uses in traditional medicine. In this study, we attempted and optimized the microwave-assisted hydro-distillation (MAHD) process to obtain essential oil from the leaves of C. candicans. In addition, the obtained oil was analyzed for volatile composition by gas chromatography–mass spectrometry (GC-MS) and assayed for bioactivity against several bacteria and cancer cell lines. To optimize the extraction process, response surface methodology (RSM) in combination with central composite design (CCD) was adopted. Experimental design and optimization were carried out with respect to three experimental factors including the ratio of water to raw material, extraction time, and microwave power. The optimal extraction conditions were obtained as follows: water to raw material ratio of 6/1 (v/w), extraction time 42 min, and microwave power 440 W. Composition determination of the obtained C. candicans essential oil indicated the presence of predominant components including caryophyllene (10.45%), cadinene (10.28%), gurjunene (8.95%), muurolene (8.92%), selinene (7.06%), selinene (5.59%), and copaene (5.40%). In comparison with the essential oils obtained via traditional hydro-distillation method, the essential oil extracted by MAHD exhibited superior anti-proliferative activity on all tested cancer cell lines. Current results imply that the MAHD is capable of recovering biologically-active natural products of greater quantity than that recovered by the conventional distillation.


  • Open Access

    Isolation of Penicillium citrinum from Roots of Clerodendron cyrtophyllum and Application in Biosynthesis of Aglycone Isoflavones from Soybean Waste Fermentation

    by Duy Tien Doan, Duc Phuong Luu, Thanh Duong Nguyen, Bich Hoang Thi, Hong Minh Pham Thi, Huu Nghi Do, Van Huyen Luu, The Dan Pham, Van Thai Than, Hai Ha Pham Thi, et al.

    Soybeans offer an abundant source of isoflavones, which confer useful bioactivities when existing in aglycone forms. The conversion of isoflavones into aglycones via fermentation of soybean products is often realized by β-glucosidase, an enzyme produced by fungi. In this study, a filamentous fungus, Clerodendron cyrtophyllum, was isolated from root of Clerodendron cyrtophyllum Turcz, which was able to produce the highest activity of β-glucosidase up to 33.72 U/mL at 144 h during fermentation on Potato Dextrose Broth (PDB). The obtained fungus was grown on isoflavones-rich soybean extract to produce genistein and daidzein, achieving the conversion rate of 98.7%. Genistein and daidzein were isolated and purified by column chromatography using hexane/acetone (29:1/1:1), reaching purities of over 90% of total isoflavones, as identified and determined by TLC, LC-MS/MS, and 1H and 13C NMR spectroscopy. These results imply that the isolated P. citrinum is a potential fungal strain for industrial-scale production of genistein and daidzein from isoflavones-containing soybean extracts. These products may serve as potential raw materials for manufacture of functional foods that are based on aglycones.