Takanori Shirokura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takanori Shirokura has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Pham Nam Hai
Department of Electrical and Electronic Engineering, Institute of Science Tokyo, Tokyo 152-8552, Japan
18 shared publications - Nguyen Huynh Duy Khang
Faculty of Physics, Ho Chi Minh City University of Education, Ho Chi Minh City, Vietnam
4 shared publications Kuniyuki Kakushima
School of Engineering, Tokyo Institute of Technology, Meguro City, Tokyo, Japan
3 shared publications- Tuo Fan
Western Digital Inc. 3 , Fujisawa site, Kanagawa 252-0811
3 shared publications Hitoshi Wakabayashi
Tokyo Institute of Technology, Yokohama, Tokyo, JAPAN
2 shared publicationsHo Hoang Huy
Department of Electrical and Electronic Engineering, Tokyo Institute of Technology, Tokyo, Japan
2 shared publications
Latest Publications
- 2 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (9)
Spin–orbit torque-induced magnetization switching in electrochemically deposited CoPt oriented polycrystalline film
Current-induced spin–orbit torque (SOT) offers an efficient method of manipulating magnetization and is widely applied in emerging three-dimensional (3D) magnetic memory technologies. Electrochemical deposition presents a promising route for fabricating such 3D structures; yet, achieving high-quality magnetic films and spintronics phenomena remains challenging. Here, we demonstrate SOT in an electrochemically deposited 7.3 nm-thick CoPt thin film with strong perpendicular magnetic anisotropy, grown on a Pt seed layer, which serves as the spin source for this system. Accurate analysis of the SOT effective field using combined second-harmonic Hall measurements revealed the existence of SOT and its dependence on the magnetization angle. Furthermore, current-induced magnetization switching was achieved in a 2.8 nm-thick CoPt alloy film. This work unveils the potential of electrochemical deposition for next-generation 3D spintronics device applications.
- 2 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (9)
Spin–orbit torque-induced magnetization switching in electrochemically deposited CoPt oriented polycrystalline film
Current-induced spin–orbit torque (SOT) offers an efficient method of manipulating magnetization and is widely applied in emerging three-dimensional (3D) magnetic memory technologies. Electrochemical deposition presents a promising route for fabricating such 3D structures; yet, achieving high-quality magnetic films and spintronics phenomena remains challenging. Here, we demonstrate SOT in an electrochemically deposited 7.3 nm-thick CoPt thin film with strong perpendicular magnetic anisotropy, grown on a Pt seed layer, which serves as the spin source for this system. Accurate analysis of the SOT effective field using combined second-harmonic Hall measurements revealed the existence of SOT and its dependence on the magnetization angle. Furthermore, current-induced magnetization switching was achieved in a 2.8 nm-thick CoPt alloy film. This work unveils the potential of electrochemical deposition for next-generation 3D spintronics device applications.
- Open Access
- 15 December 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (23)
Architecture of 3D magnetic domain wall memory for suppressing bit-shift error
We propose an architecture for the suppression of magnetic domain wall shift error in 3D magnetic domain wall memory, which utilizes the spatially modulated perpendicular magnetic anisotropy (PMA) of magnetic layers that are deposited on the side walls of multilayers of different oxide materials. We experimentally identified the oxide material candidates for such implementation and found that CrOx can generate the largest PMA while GdOx generates the smallest PMA of Pt/Co/Pt multilayers. Our proposed architecture can be a key to realizing 3D magnetic domain wall racetrack memory with low bit-shift error.
- 15 December 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (23)
Open AccessArchitecture of 3D magnetic domain wall memory for suppressing bit-shift error
We propose an architecture for the suppression of magnetic domain wall shift error in 3D magnetic domain wall memory, which utilizes the spatially modulated perpendicular magnetic anisotropy (PMA) of magnetic layers that are deposited on the side walls of multilayers of different oxide materials. We experimentally identified the oxide material candidates for such implementation and found that CrOx can generate the largest PMA while GdOx generates the smallest PMA of Pt/Co/Pt multilayers. Our proposed architecture can be a key to realizing 3D magnetic domain wall racetrack memory with low bit-shift error.
- Open Access
- 2 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Effective demagnetizing tensor incorporating finite width effect for magnetic nanowire design in racetrack devices
Structural engineering is a promising approach to enhance the performance of racetrack devices in term of power consumption for domain wall dynamics and shift errors via the control of the in-plane shape anisotropy in magnetic nanowires. Because the in-plane shape anisotropy is determined by the nanowire width, it is essential to incorporate the width effect into the demagnetizing tensor to design racetrack devices through a structural approach; however, a quantitative evaluation of the width effect on the demagnetizing tensor is still lacking. In this work, we have derived the formula for the effective demagnetizing tensor in nanowires with finite width. We also analytically revealed that the special width, at which intrinsic pining potential vanishes, is proportional to the domain wall width. The derived formulas were in good agreement with the two-dimensional micromagnetic simulation results at various nanowire widths, demonstrating their validity. Our results provide a guideline for designing racetrack devices with low power consumption and minimal shift errors via structural engineering.
- 2 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Open AccessEffective demagnetizing tensor incorporating finite width effect for magnetic nanowire design in racetrack devices
Structural engineering is a promising approach to enhance the performance of racetrack devices in term of power consumption for domain wall dynamics and shift errors via the control of the in-plane shape anisotropy in magnetic nanowires. Because the in-plane shape anisotropy is determined by the nanowire width, it is essential to incorporate the width effect into the demagnetizing tensor to design racetrack devices through a structural approach; however, a quantitative evaluation of the width effect on the demagnetizing tensor is still lacking. In this work, we have derived the formula for the effective demagnetizing tensor in nanowires with finite width. We also analytically revealed that the special width, at which intrinsic pining potential vanishes, is proportional to the domain wall width. The derived formulas were in good agreement with the two-dimensional micromagnetic simulation results at various nanowire widths, demonstrating their validity. Our results provide a guideline for designing racetrack devices with low power consumption and minimal shift errors via structural engineering.
- Open Access
- 1 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 883-891
Impact of Underlying Insulators on the Crystallinity and Antisite Defect Formation in PVD-MoS2 Films
The effect of different underlying insulators on molybdenum disulfide (MoS2) films deposited using sputtering, which is a physical vapor deposition (PVD) method, was studied. The study reveals that the underlying insulator strongly affects the properties of the deposited PVD-MoS2 films. First, the results suggested the formation of Mo antisites during sputtering deposition, which weaken the Mo–S bonds in the MoS2 film and enhances its carrier density. Second, the crystallinity of the MoS2 films was evaluated on the basis of Raman intensity and fast Fourier transform (FFT) analysises of cross-sectional transmission electron microscopy (TEM) images. Among the samples investigated, MoS2 deposited onto atomic layer deposition (ALD)-SiO2 exhibited the highest crystallinity. These findings highlight the critical role of the underlying insulator in optimizing PVD-MoS2 films for future applications in three-dimensionally stacked field-effect transistors.
- 1 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 13, 883-891
Open AccessImpact of Underlying Insulators on the Crystallinity and Antisite Defect Formation in PVD-MoS2 Films
The effect of different underlying insulators on molybdenum disulfide (MoS2) films deposited using sputtering, which is a physical vapor deposition (PVD) method, was studied. The study reveals that the underlying insulator strongly affects the properties of the deposited PVD-MoS2 films. First, the results suggested the formation of Mo antisites during sputtering deposition, which weaken the Mo–S bonds in the MoS2 film and enhances its carrier density. Second, the crystallinity of the MoS2 films was evaluated on the basis of Raman intensity and fast Fourier transform (FFT) analysises of cross-sectional transmission electron microscopy (TEM) images. Among the samples investigated, MoS2 deposited onto atomic layer deposition (ALD)-SiO2 exhibited the highest crystallinity. These findings highlight the critical role of the underlying insulator in optimizing PVD-MoS2 films for future applications in three-dimensionally stacked field-effect transistors.
- Open Access
- 12 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (7)
High spin Hall angle in BiSb topological insulator and perpendicularly magnetized CoFeB/MgO multilayers with metallic interfacial layers
In this study, we investigate the spin Hall effect in heterostructures of Bi0.85Sb0.15 (10 nm) topological insulator/Ru(Ti)/Ta/Co20Fe60B20/MgO with perpendicular magnetic anisotropy. By optimizing the Ru (Ti) interfacial layer thickness as well as deposition condition of BiSb, we achieve a large effective spin Hall angle of 6.0 ± 0.1 and relatively high electrical conductivity of 1.5 × 105 Ω−1 m−1 at room temperature. We, then, demonstrate spin–orbit torque-induced magnetization switching driven by a small threshold current density of 1 × 106 Acm−2. Benchmarking shows that the writing power consumption of our stack is 2–3 orders smaller than that of heavy metals.
- 12 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (7)
Open AccessHigh spin Hall angle in BiSb topological insulator and perpendicularly magnetized CoFeB/MgO multilayers with metallic interfacial layers
In this study, we investigate the spin Hall effect in heterostructures of Bi0.85Sb0.15 (10 nm) topological insulator/Ru(Ti)/Ta/Co20Fe60B20/MgO with perpendicular magnetic anisotropy. By optimizing the Ru (Ti) interfacial layer thickness as well as deposition condition of BiSb, we achieve a large effective spin Hall angle of 6.0 ± 0.1 and relatively high electrical conductivity of 1.5 × 105 Ω−1 m−1 at room temperature. We, then, demonstrate spin–orbit torque-induced magnetization switching driven by a small threshold current density of 1 × 106 Acm−2. Benchmarking shows that the writing power consumption of our stack is 2–3 orders smaller than that of heavy metals.
- 6 February 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (2) , 02SP98
Effects of post-growth annealing in YPtBi topological semimetal and Co/Pt perpendicular magnetization multilayers
We investigated the effects of post-annealing on the magnetic properties and spin orbit torque (SOT) in CoPt/YPtBi heterostructures, where YPtBi is a topological semimetal with a large spin Hall angle. From crystal structure analysis by X-ray diffraction and transmission electron microscopy, magnetization, anomalous Hall resistance, and second harmonic Hall measurements, we found that the magnetic properties and SOT performance in CoPt/YPtBi are improved by post-growth annealing up to 300 °C, while they are degraded after 350 °C annealing due to intermixing and alloying. By comparative experiments using CoPt/W, we show that YPtBi is more resistive to intermixing and alloying with CoPt than W.
- 6 February 2024
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 63 (2) , 02SP98
Effects of post-growth annealing in YPtBi topological semimetal and Co/Pt perpendicular magnetization multilayers
We investigated the effects of post-annealing on the magnetic properties and spin orbit torque (SOT) in CoPt/YPtBi heterostructures, where YPtBi is a topological semimetal with a large spin Hall angle. From crystal structure analysis by X-ray diffraction and transmission electron microscopy, magnetization, anomalous Hall resistance, and second harmonic Hall measurements, we found that the magnetic properties and SOT performance in CoPt/YPtBi are improved by post-growth annealing up to 300 °C, while they are degraded after 350 °C annealing due to intermixing and alloying. By comparative experiments using CoPt/W, we show that YPtBi is more resistive to intermixing and alloying with CoPt than W.
- Open Access
- 29 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (5)
High-efficient spin orbit torque generated by topological semimetal YPtBi deposited on oxidized Si substrates
Half-Heusler alloy topological semimetal YPtBi is a promising candidate for an efficient spin current source in spin–orbit torque (SOT) devices thanks to its large spin Hall angle θSH (>1) and high thermal stability (600 °C). However, the spin Hall effect has been studied so far in high quality YPtBi(111) thin films deposited on c-Sapphire substrates. In this work, we study the SOT performance of sputtered YPtBi films deposited on SiO2/Si substrates. We realized YPtBi(110) thin films with large θSH of 1.3 at a relatively high conductivity of 1.4 × 105 Ω−1 m−1. The spin Hall conductivity of YPtBi(110) is even better than those of YPtBi(111) thin films deposited on c-Sapphire substrates, despite the lower crystal quality. Our results pave the way for using YPtBi in integrated SOT devices on Si substrates.
- 29 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (5)
Open AccessHigh-efficient spin orbit torque generated by topological semimetal YPtBi deposited on oxidized Si substrates
Half-Heusler alloy topological semimetal YPtBi is a promising candidate for an efficient spin current source in spin–orbit torque (SOT) devices thanks to its large spin Hall angle θSH (>1) and high thermal stability (600 °C). However, the spin Hall effect has been studied so far in high quality YPtBi(111) thin films deposited on c-Sapphire substrates. In this work, we study the SOT performance of sputtered YPtBi films deposited on SiO2/Si substrates. We realized YPtBi(110) thin films with large θSH of 1.3 at a relatively high conductivity of 1.4 × 105 Ω−1 m−1. The spin Hall conductivity of YPtBi(110) is even better than those of YPtBi(111) thin films deposited on c-Sapphire substrates, despite the lower crystal quality. Our results pave the way for using YPtBi in integrated SOT devices on Si substrates.
- Open Access
- 15 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (3)
Publisher's Note: “Enhanced spin Hall effect at high temperature in non-centrosymmetric silicide TaSi2 driven by Berry phase monopoles” [Appl. Phys. Lett. 123, 262402 (2023)]
This article was originally published online on 26 December 2023 with the incorrect version of Fig. 3. Figure 3 is correct as it appears here.
- 15 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (3)
Open AccessPublisher's Note: “Enhanced spin Hall effect at high temperature in non-centrosymmetric silicide TaSi2 driven by Berry phase monopoles” [Appl. Phys. Lett. 123, 262402 (2023)]
This article was originally published online on 26 December 2023 with the incorrect version of Fig. 3. Figure 3 is correct as it appears here.
- Open Access
- 25 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (26)
Enhanced spin Hall effect at high temperature in non-centrosymmetric silicide TaSi2 driven by Berry phase monopoles
We demonstrate the concept of Berry phase monopole engineering of the spin Hall effect in non-centrosymmetric silicide TaSi2. We show that while the effective damping-like spin–orbit torque (SOT) efficiency θDLeff of TaSi2 is nearly unchanged from 62 to 288 K (−0.049 to −0.069), θDLeff suddenly increases at high temperatures and becomes nearly double (−0.12) at 346 K. The corresponding intrinsic spin Hall conductivity σDLeff significantly increases at high temperatures, which can be attributed to the increasing contribution from the four degenerate points near the Fermi level via thermal excitation. Our results provide a strategy to enhance θDLeff at high temperatures via Berry phase monopole engineering and pave the way for SOT spintronic devices working at high temperatures.
- 25 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (26)
Open AccessEnhanced spin Hall effect at high temperature in non-centrosymmetric silicide TaSi2 driven by Berry phase monopoles
We demonstrate the concept of Berry phase monopole engineering of the spin Hall effect in non-centrosymmetric silicide TaSi2. We show that while the effective damping-like spin–orbit torque (SOT) efficiency θDLeff of TaSi2 is nearly unchanged from 62 to 288 K (−0.049 to −0.069), θDLeff suddenly increases at high temperatures and becomes nearly double (−0.12) at 346 K. The corresponding intrinsic spin Hall conductivity σDLeff significantly increases at high temperatures, which can be attributed to the increasing contribution from the four degenerate points near the Fermi level via thermal excitation. Our results provide a strategy to enhance θDLeff at high temperatures via Berry phase monopole engineering and pave the way for SOT spintronic devices working at high temperatures.
- 7 September 2023
- Published by Japan Society of Applied Physics
Annealing temperature effects on spin orbit torque in YPtBi topological semimetal and Co/Pt perpendicular magnetization multilayers
2023 International Conference on Solid State Devices and Materials ,Annealing temperature effects on spin orbit torque in YPtBi topological semimetal and Co/Pt perpendicular magnetization multilayers
- 7 September 2023
- Published by Japan Society of Applied Physics
Annealing temperature effects on spin orbit torque in YPtBi topological semimetal and Co/Pt perpendicular magnetization multilayers
2023 International Conference on Solid State Devices and Materials ,Annealing temperature effects on spin orbit torque in YPtBi topological semimetal and Co/Pt perpendicular magnetization multilayers