ATArun Thapa

Arun Thapa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Arun Thapa has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fast Charging of Silicon Anode-Based Lithium-Ion Batteries at the Pouch Cell Level

    by Arun Thapa, Hongwei Gao

    Silicon (Si) is an attractive anode material for next-generation lithium-ion batteries (LIBs) because of its high theoretical capacity and natural abundance. Therefore, its physical and energy storage properties, especially achieving high specific capacity and cyclability, have been studied extensively. However, there is a lack of reports on the proper fast charging of Si-based LIBs. Herein, we developed an anode by physically mixing Si nanoparticles with carbon nanotubes and assembled a three-electrode pouch cell by pairing the developed anode with a lithium nickel manganese cobalt oxide cathode and an extra reference electrode. The reference electrode was crucial in developing a fast-charging protocol (FCP) that not only fast-charged the cell but also prevented lithium plating, which is essential for extending the cycle life of LIBs. The FCP achieved 10–80% and 0–80% states of charge in 14.5 and 20.5 minutes, respectively, at room temperature. The FCP achieved ~55% capacity retention (616 mAh g-1) after 500 fast-charging cycles, indicating excellent cycle stability and good battery health. This work presents FCP and its performance data from Si-based LIBs to the battery community, which can be crucial to exploring the fastest possible FCP for next-generation high-energy-density LIBs.


  • Open Access

    Field Emission Properties of Cu-Filled Vertically Aligned Carbon Nanotubes Grown Directly on Thin Cu Foils

    by Chinaza E. Nwanno, Arun Thapa, John Watt, Daniel Simkins Bendayan, Wenzhi Li

    Copper-filled vertically aligned carbon nanotubes (Cu@VACNTs) were grown directly on Cu foil substrates of 0.1 mm thicknesses at different temperatures via plasma-enhanced chemical vapor deposition (PECVD). By circumventing the need for additional catalyst layers or intensive substrate treatments, our in-situ technique offers a simplified and potentially scalable route for fabricating Cu@VACNTs with enhanced electrical and thermal properties on thin Cu foils. Comprehensive analysis using field emission scanning microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) mappings, and X-ray diffraction (XRD) revealed uniform Cu filling within the VACNTs across a range of synthesis temperatures (650 °C, 700 °C, and 760 °C). Field emission (FE) measurements of the sample synthesized at 700 °C (S700) showed low turn-on and threshold fields of 2.33 V/μm and 3.29 V/μm, respectively. The findings demonstrate the viability of thin Cu substrates in creating dense and highly conductive Cu-filled VACNT arrays for advanced electronic and nanoelectronics applications.


  • Open Access

    Electron Field Emission and Electrochemical Lithiation Properties of Vertically Aligned Carbon Nanotube Arrays Grown Directly on Metal Substrates

    by Arun Thapa

    Carbon nanotubes (CNTs) represent one of the critical inventions that have triggered new science and technology in many fields because of their distinctive mechanical, thermal, electrical, electrochemical, and optical properties. Despite the tremendous potential of CNTs, challenges in synthesizing and processing continue to hinder their applications. This dissertation is devoted to synthesizing vertically aligned CNT arrays on metal substrates via plasma-enhanced chemical vapor deposition and the study of their electron field emission (FE) and electrochemical lithiation properties. Vertically aligned CNTs (VACNTs) are promising electron field emitters for vacuum micro/nano-electronics. Improved control over the morphology and a successful direct-growth of the VACNTs on a metal substrate will greatly improve their emission current and temporal stability. Coating the VACNTs with metal oxides or filling the interior hollow channels of the VACNTs with metals will boost both their mechanical strength and electrical conductivity. The first part of this dissertation is focused on the controlled synthesis, surface modification, metal filling, and FE properties measurement of VACNT arrays grown over several metal substrates, including stainless steel, copper, and nickel. Compared to pristine VACNT array, the SnO2 coated VACNTs (SnO2-VACNTs), VACNT pillars, and copper-filled VACNT array exhibited enhanced FE properties because of the unique structural change caused by the coating procedure, the protection against the structural failure of VACNTs provided by SnO2 nanoparticles, the low contact resistance between the substrate and the VACNTs, the increased active electron emitting sites in pillar structures, and the improved thermal and electrical conductivities of VACNTs caused by a highly conductive copper core filled inside the VACNTs. Vertically aligned CNTs have great potential applications for developing high-energy and high-power density lithium-ion batteries (LIBs). In the second part of the dissertation, the electrochemical lithiation property of the free-standing binder-free SnO2-VACNTs was investigated. Compared to the conventional graphite-based LIB anode, the SnO2-VACNTs exhibited superior Li+ storage performance with a high specific capacity of 1891 mAh/g at a current density of 0.1 Ah/g after 100 cycles and 900 mAh/g at the current density of 1 A/g after 200 cycles with excellent coulombic efficiency and rate capability, showing potential anode material for developing future LIBs.

  • Low-frequency Inductive Loop and Its Origin in the Impedance Spectrum of a Graphite Anode

    by Arun Thapa, Hongwei Gao

    Graphite is a well-known anode material for commercial lithium-ion batteries, and its physical and electrochemical properties have been studied extensively. However, the origin of an inductive loop observed in the low-frequency region of the Nyquist complex plane impedance spectrum of the graphite anode has been widely debated and attributed to contrasting reasons. This paper investigates the impedance spectrum of the graphite anode at various states of charge (SoCs) using three-electrode galvanostatic Electrochemical Impedance Spectroscopy (EIS) and further explores the impedance response of the electrolyte as a function of frequency. The graphite anode EIS measurement displayed an inductive loop in the low-frequency region for almost entire SoCs, irrespective of the solid electrolyte interphase (SEI) age. To study the origin of this inductive loop in the graphite impedance spectrum, we fabricated a three-electrode pouch cell with graphite and NMC electrodes and estimated the electrolyte impedance in the frequency range from 1 MHz to 0.05 Hz. The electrolyte impedance at low frequencies exhibited inductive behavior, indicating a significant role of the electrolyte in the origin of the inductive characteristic in the low-frequency region of the graphite EIS spectrum.


  • Direct synthesis of micropillars of vertically aligned carbon nanotubes on stainless-steel and their excellent field emission properties

    by Arun Thapa, Yuba Raj Poudel, Rui Guo, Katherine L. Jungjohann, Xuewen Wang, Wenzhi Li


  • Open Access

    Comparative study of electron field emission from randomly-oriented and vertically-aligned carbon nanotubes synthesized on stainless steel substrates

    by Matthew R. Kurilich, Arun Thapa, Aric Moilanen, Joyce L. Miller, Wenzhi Li, Suman Neupane

    Randomly-oriented carbon nanotubes (CNTs) and vertically-aligned CNTs have been synthesized by a thermal chemical vapor deposition (CVD) process and a plasma enhanced CVD process, respectively, on stainless steel substrates without any external catalyst. Surface topography studies reveal that polishing and chemical etching result in favorable catalytic conditions for nucleation and growth of CNTs. Scanning electron microscopy and transmission electron microscopy observations reveal the growth of CNTs with catalyst particle at the tips. In comparison to randomly-oriented CNTs, vertically-aligned CNTs demonstrate better field emission properties with lower turn-on electric field of ∼2.0 V/μm, lower threshold electric field of ∼3.2 V/μm, and a 2.5-fold increase in the field enhancement factor. The vertical alignment of the emitters benefits the emission process by reducing the screening effect and streamlining the path of ejected electrons directly onto the anode. Vertically-aligned CNTs on conducting substrates are promising emitters in cold cathode vacuum electronics because of their direct contact with the substrate and efficient performance at low operating voltages.