Aijun Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aijun Deng has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Kenneth James Davis
The Pennsylvania State University, University Park, PA, USA
5 shared publications - Thomas Lauvaux
Climate Impacts on Environment Laboratory (CIEL), Université de Reims-Champagne Ardenne, EMR CNRS 7007 AEROLAB, Reims, France
5 shared publications - Alan Brewer
NOAA Chemical Sciences Laboratory
3 shared publications - Kevin Robert Gurney
School of Life Sciences, Arizona State University, Tempe, Arizona, US
3 shared publications - R. Michael Hardesty
Cooperative Institute for Research in Environmental Sciences, USA
3 shared publications - Brian J. Gaudet
The Pennsylvania State University, Pennsylvania, US
2 shared publications
Latest Publications
- Open Access
- 1 January 2018
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 6 (1)
Joint inverse estimation of fossil fuel and biogenic CO2 fluxes in an urban environment: An observing system simulation experiment to assess the impact of multiple uncertainties
The Indianapolis Flux Experiment aims to utilize a variety of atmospheric measurements and a high-resolution inversion system to estimate the temporal and spatial variation of anthropogenic greenhouse gas emissions from an urban environment. We present a Bayesian inversion system solving for fossil fuel and biogenic CO2 fluxes over the city of Indianapolis, IN. Both components were described at 1 km resolution to represent point sources and fine-scale structures such as highways in the a priori fluxes. With a series of Observing System Simulation Experiments, we evaluate the sensitivity of inverse flux estimates to various measurement deployment strategies and errors. We also test the impacts of flux error structures, biogenic CO2 fluxes and atmospheric transport errors on estimating fossil fuel CO2 emissions and their uncertainties. The results indicate that high-accuracy and high-precision measurements produce significant improvement in fossil fuel CO2 flux estimates. Systematic measurement errors of 1 ppm produce significantly biased inverse solutions, degrading the accuracy of retrieved emissions by about 1 µmol m–2 s–1 compared to the spatially averaged anthropogenic CO2 emissions of 5 µmol m–2 s–1. The presence of biogenic CO2 fluxes (similar magnitude to the anthropogenic fluxes) limits our ability to correct for random and systematic emission errors. However, assimilating continuous fossil fuel CO2 measurements with 1 ppm random error in addition to total CO2 measurements can partially compensate for the interference from biogenic CO2 fluxes. Moreover, systematic and random flux errors can be further reduced by reducing model-data mismatch errors caused by atmospheric transport uncertainty. Finally, the precision of the inverse flux estimate is highly sensitive to the correlation length scale in the prior emission errors. This work suggests that improved fossil fuel CO2 measurement technology, and better understanding of both prior flux and atmospheric transport errors are essential to improve the accuracy and precision of high-resolution urban CO2 flux estimates.
- 1 January 2018
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 6 (1)
Open AccessJoint inverse estimation of fossil fuel and biogenic CO2 fluxes in an urban environment: An observing system simulation experiment to assess the impact of multiple uncertainties
The Indianapolis Flux Experiment aims to utilize a variety of atmospheric measurements and a high-resolution inversion system to estimate the temporal and spatial variation of anthropogenic greenhouse gas emissions from an urban environment. We present a Bayesian inversion system solving for fossil fuel and biogenic CO2 fluxes over the city of Indianapolis, IN. Both components were described at 1 km resolution to represent point sources and fine-scale structures such as highways in the a priori fluxes. With a series of Observing System Simulation Experiments, we evaluate the sensitivity of inverse flux estimates to various measurement deployment strategies and errors. We also test the impacts of flux error structures, biogenic CO2 fluxes and atmospheric transport errors on estimating fossil fuel CO2 emissions and their uncertainties. The results indicate that high-accuracy and high-precision measurements produce significant improvement in fossil fuel CO2 flux estimates. Systematic measurement errors of 1 ppm produce significantly biased inverse solutions, degrading the accuracy of retrieved emissions by about 1 µmol m–2 s–1 compared to the spatially averaged anthropogenic CO2 emissions of 5 µmol m–2 s–1. The presence of biogenic CO2 fluxes (similar magnitude to the anthropogenic fluxes) limits our ability to correct for random and systematic emission errors. However, assimilating continuous fossil fuel CO2 measurements with 1 ppm random error in addition to total CO2 measurements can partially compensate for the interference from biogenic CO2 fluxes. Moreover, systematic and random flux errors can be further reduced by reducing model-data mismatch errors caused by atmospheric transport uncertainty. Finally, the precision of the inverse flux estimate is highly sensitive to the correlation length scale in the prior emission errors. This work suggests that improved fossil fuel CO2 measurement technology, and better understanding of both prior flux and atmospheric transport errors are essential to improve the accuracy and precision of high-resolution urban CO2 flux estimates.
- Open Access
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
A comprehensive assessment of land surface-atmosphere interactions in a WRF/Urban modeling system for Indianapolis, IN
As part of the Indianapolis Flux (INFLUX) experiment, the accuracy and biases of simulated meteorological fields were assessed for the city of Indianapolis, IN. The INFLUX project allows for a unique opportunity to conduct an extensive observation-to-model comparison in order to assess model errors for the following meteorological variables: latent heat and sensible heat fluxes, air temperature near the surface and in the planetary boundary layer (PBL), wind speed and direction, and PBL height. In order to test the sensitivity of meteorological simulations to different model packages, a set of simulations was performed by implementing different PBL schemes, urban canopy models (UCMs), and a model subroutine that was created in order to reduce an inherent model overestimation of urban land cover. It was found that accurately representing the amount of urban cover in the simulations reduced the biases in most cases during the summertime (SUMMER) simulations. The simulations that used the BEP urban canopy model and the Bougeault & Lacarrere (BouLac) PBL scheme had the smallest biases in the wintertime (WINTER) simulations for most meteorological variables, with the exception being wind direction. The model configuration chosen had a larger impact on model errors during the WINTER simulations, whereas the differences between most of the model configurations during the SUMMER simulations were not statistically significant. By learning the behaviors of different PBL schemes and urban canopy models, researchers can start to understand the expected biases in certain model configurations for their own simulations and have a hypothesis as to the potential errors and biases that might occur when using a multi-physics ensemble based modeling approach.
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
Open AccessA comprehensive assessment of land surface-atmosphere interactions in a WRF/Urban modeling system for Indianapolis, IN
As part of the Indianapolis Flux (INFLUX) experiment, the accuracy and biases of simulated meteorological fields were assessed for the city of Indianapolis, IN. The INFLUX project allows for a unique opportunity to conduct an extensive observation-to-model comparison in order to assess model errors for the following meteorological variables: latent heat and sensible heat fluxes, air temperature near the surface and in the planetary boundary layer (PBL), wind speed and direction, and PBL height. In order to test the sensitivity of meteorological simulations to different model packages, a set of simulations was performed by implementing different PBL schemes, urban canopy models (UCMs), and a model subroutine that was created in order to reduce an inherent model overestimation of urban land cover. It was found that accurately representing the amount of urban cover in the simulations reduced the biases in most cases during the summertime (SUMMER) simulations. The simulations that used the BEP urban canopy model and the Bougeault & Lacarrere (BouLac) PBL scheme had the smallest biases in the wintertime (WINTER) simulations for most meteorological variables, with the exception being wind direction. The model configuration chosen had a larger impact on model errors during the WINTER simulations, whereas the differences between most of the model configurations during the SUMMER simulations were not statistically significant. By learning the behaviors of different PBL schemes and urban canopy models, researchers can start to understand the expected biases in certain model configurations for their own simulations and have a hypothesis as to the potential errors and biases that might occur when using a multi-physics ensemble based modeling approach.
- Open Access
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
Toward reduced transport errors in a high resolution urban CO2 inversion system
We present a high-resolution atmospheric inversion system combining a Lagrangian Particle Dispersion Model (LPDM) and the Weather Research and Forecasting model (WRF), and test the impact of assimilating meteorological observation on transport accuracy. A Four Dimensional Data Assimilation (FDDA) technique continuously assimilates meteorological observations from various observing systems into the transport modeling system, and is coupled to the high resolution CO2 emission product Hestia to simulate the atmospheric mole fractions of CO2. For the Indianapolis Flux Experiment (INFLUX) project, we evaluated the impact of assimilating different meteorological observation systems on the linearized adjoint solutions and the CO2 inverse fluxes estimated using observed CO2 mole fractions from 11 out of 12 communications towers over Indianapolis for the Sep.-Nov. 2013 period. While assimilating WMO surface measurements improved the simulated wind speed and direction, their impact on the planetary boundary layer (PBL) was limited. Simulated PBL wind statistics improved significantly when assimilating upper-air observations from the commercial airline program Aircraft Communications Addressing and Reporting System (ACARS) and continuous ground-based Doppler lidar wind observations. Wind direction mean absolute error (MAE) decreased from 26 to 14 degrees and the wind speed MAE decreased from 2.0 to 1.2 m s–1, while the bias remains small in all configurations (< 6 degrees and 0.2 m s–1). Wind speed MAE and ME are larger in daytime than in nighttime. PBL depth MAE is reduced by ~10%, with little bias reduction. The inverse results indicate that the spatial distribution of CO2 inverse fluxes were affected by the model performance while the overall flux estimates changed little across WRF simulations when aggregated over the entire domain. Our results show that PBL wind observations are a potent tool for increasing the precision of urban meteorological reanalyses, but that the impact on inverse flux estimates is dependent on the specific urban environment.
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
Open AccessToward reduced transport errors in a high resolution urban CO2 inversion system
We present a high-resolution atmospheric inversion system combining a Lagrangian Particle Dispersion Model (LPDM) and the Weather Research and Forecasting model (WRF), and test the impact of assimilating meteorological observation on transport accuracy. A Four Dimensional Data Assimilation (FDDA) technique continuously assimilates meteorological observations from various observing systems into the transport modeling system, and is coupled to the high resolution CO2 emission product Hestia to simulate the atmospheric mole fractions of CO2. For the Indianapolis Flux Experiment (INFLUX) project, we evaluated the impact of assimilating different meteorological observation systems on the linearized adjoint solutions and the CO2 inverse fluxes estimated using observed CO2 mole fractions from 11 out of 12 communications towers over Indianapolis for the Sep.-Nov. 2013 period. While assimilating WMO surface measurements improved the simulated wind speed and direction, their impact on the planetary boundary layer (PBL) was limited. Simulated PBL wind statistics improved significantly when assimilating upper-air observations from the commercial airline program Aircraft Communications Addressing and Reporting System (ACARS) and continuous ground-based Doppler lidar wind observations. Wind direction mean absolute error (MAE) decreased from 26 to 14 degrees and the wind speed MAE decreased from 2.0 to 1.2 m s–1, while the bias remains small in all configurations (< 6 degrees and 0.2 m s–1). Wind speed MAE and ME are larger in daytime than in nighttime. PBL depth MAE is reduced by ~10%, with little bias reduction. The inverse results indicate that the spatial distribution of CO2 inverse fluxes were affected by the model performance while the overall flux estimates changed little across WRF simulations when aggregated over the entire domain. Our results show that PBL wind observations are a potent tool for increasing the precision of urban meteorological reanalyses, but that the impact on inverse flux estimates is dependent on the specific urban environment.
- Open Access
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
The Indianapolis Flux Experiment (INFLUX): A test-bed for developing urban greenhouse gas emission measurements
The objective of the Indianapolis Flux Experiment (INFLUX) is to develop, evaluate and improve methods for measuring greenhouse gas (GHG) emissions from cities. INFLUX’s scientific objectives are to quantify CO2 and CH4 emission rates at 1 km2 resolution with a 10% or better accuracy and precision, to determine whole-city emissions with similar skill, and to achieve high (weekly or finer) temporal resolution at both spatial resolutions. The experiment employs atmospheric GHG measurements from both towers and aircraft, atmospheric transport observations and models, and activity-based inventory products to quantify urban GHG emissions. Multiple, independent methods for estimating urban emissions are a central facet of our experimental design. INFLUX was initiated in 2010 and measurements and analyses are ongoing. To date we have quantified urban atmospheric GHG enhancements using aircraft and towers with measurements collected over multiple years, and have estimated whole-city CO2 and CH4 emissions using aircraft and tower GHG measurements, and inventory methods. Significant differences exist across methods; these differences have not yet been resolved; research to reduce uncertainties and reconcile these differences is underway. Sectorally- and spatially-resolved flux estimates, and detection of changes of fluxes over time, are also active research topics. Major challenges include developing methods for distinguishing anthropogenic from biogenic CO2 fluxes, improving our ability to interpret atmospheric GHG measurements close to urban GHG sources and across a broader range of atmospheric stability conditions, and quantifying uncertainties in inventory data products. INFLUX data and tools are intended to serve as an open resource and test bed for future investigations. Well-documented, public archival of data and methods is under development in support of this objective.
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
Open AccessThe Indianapolis Flux Experiment (INFLUX): A test-bed for developing urban greenhouse gas emission measurements
The objective of the Indianapolis Flux Experiment (INFLUX) is to develop, evaluate and improve methods for measuring greenhouse gas (GHG) emissions from cities. INFLUX’s scientific objectives are to quantify CO2 and CH4 emission rates at 1 km2 resolution with a 10% or better accuracy and precision, to determine whole-city emissions with similar skill, and to achieve high (weekly or finer) temporal resolution at both spatial resolutions. The experiment employs atmospheric GHG measurements from both towers and aircraft, atmospheric transport observations and models, and activity-based inventory products to quantify urban GHG emissions. Multiple, independent methods for estimating urban emissions are a central facet of our experimental design. INFLUX was initiated in 2010 and measurements and analyses are ongoing. To date we have quantified urban atmospheric GHG enhancements using aircraft and towers with measurements collected over multiple years, and have estimated whole-city CO2 and CH4 emissions using aircraft and tower GHG measurements, and inventory methods. Significant differences exist across methods; these differences have not yet been resolved; research to reduce uncertainties and reconcile these differences is underway. Sectorally- and spatially-resolved flux estimates, and detection of changes of fluxes over time, are also active research topics. Major challenges include developing methods for distinguishing anthropogenic from biogenic CO2 fluxes, improving our ability to interpret atmospheric GHG measurements close to urban GHG sources and across a broader range of atmospheric stability conditions, and quantifying uncertainties in inventory data products. INFLUX data and tools are intended to serve as an open resource and test bed for future investigations. Well-documented, public archival of data and methods is under development in support of this objective.
- Open Access
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
Exploration of the impact of nearby sources on urban atmospheric inversions using large eddy simulation
The Indianapolis Flux Experiment (INFLUX) aims to quantify and improve the effectiveness of inferring greenhouse gas (GHG) source strengths from downstream concentration measurements in urban environments. Mesoscale models such as the Weather Research and Forecasting (WRF) model can provide realistic depictions of planetary boundary layer (PBL) structure and flow fields at horizontal grid lengths (Δx) down to a few km. Nevertheless, a number of potential sources of error exist in the use of mesoscale models for urban inversions, including accurate representation of the dispersion of GHGs by turbulence close to a point source. Here we evaluate the predictive skill of a 1-km chemistry-adapted WRF (WRF-Chem) simulation of daytime CO2 transport from an Indianapolis power plant for a single INFLUX case (28 September 2013). We compare the simulated plume release on domains at different resolutions, as well as on a domain run in large eddy simulation (LES) mode, enabling us to study the impact of both spatial resolution and parameterization of PBL turbulence on the transport of CO2. Sensitivity tests demonstrate that much of the difference between 1-km mesoscale and 111-m LES plumes, including substantially lower maximum concentrations in the mesoscale simulation, is due to the different horizontal resolutions. However, resolution is insufficient to account for the slower rate of ascent of the LES plume with downwind distance, which results in much higher surface concentrations for the LES plume in the near-field but a near absence of tracer aloft. Physics sensitivity experiments and theoretical analytical models demonstrate that this effect is an inherent problem with the parameterization of turbulent transport in the mesoscale PBL scheme. A simple transformation is proposed that may be applied to mesoscale model concentration footprints to correct for their near-field biases. Implications for longer-term source inversion are discussed.
- 1 January 2017
- Published by University of California Press in Elementa: Science of the Anthropocene
- Vol. 5
Open AccessExploration of the impact of nearby sources on urban atmospheric inversions using large eddy simulation
The Indianapolis Flux Experiment (INFLUX) aims to quantify and improve the effectiveness of inferring greenhouse gas (GHG) source strengths from downstream concentration measurements in urban environments. Mesoscale models such as the Weather Research and Forecasting (WRF) model can provide realistic depictions of planetary boundary layer (PBL) structure and flow fields at horizontal grid lengths (Δx) down to a few km. Nevertheless, a number of potential sources of error exist in the use of mesoscale models for urban inversions, including accurate representation of the dispersion of GHGs by turbulence close to a point source. Here we evaluate the predictive skill of a 1-km chemistry-adapted WRF (WRF-Chem) simulation of daytime CO2 transport from an Indianapolis power plant for a single INFLUX case (28 September 2013). We compare the simulated plume release on domains at different resolutions, as well as on a domain run in large eddy simulation (LES) mode, enabling us to study the impact of both spatial resolution and parameterization of PBL turbulence on the transport of CO2. Sensitivity tests demonstrate that much of the difference between 1-km mesoscale and 111-m LES plumes, including substantially lower maximum concentrations in the mesoscale simulation, is due to the different horizontal resolutions. However, resolution is insufficient to account for the slower rate of ascent of the LES plume with downwind distance, which results in much higher surface concentrations for the LES plume in the near-field but a near absence of tracer aloft. Physics sensitivity experiments and theoretical analytical models demonstrate that this effect is an inherent problem with the parameterization of turbulent transport in the mesoscale PBL scheme. A simple transformation is proposed that may be applied to mesoscale model concentration footprints to correct for their near-field biases. Implications for longer-term source inversion are discussed.
- 1 September 2013
- Published by American Meteorological Society in Journal of Applied Meteorology and Climatology
- Vol. 52 (9) , 1953-1973
Application of the Weather Research and Forecasting Model for Air Quality Modeling in the San Francisco Bay Area
The Weather Research and Forecasting (WRF) model is evaluated by conducting various sensitivity experiments over central California including the San Francisco Bay Area (SFBA), with the goal of establishing a WRF model configuration to be used by the Bay Area Air Quality Management District (BAAQMD) for its air quality applications. For the two selected cases, a winter particulate matter case and a summer ozone case, WRF solutions are evaluated both quantitatively by comparing the error statistics and qualitatively by analyzing the model-simulated mesoscale features. Model evaluation is also performed for the SFBA, Sacramento Valley, and San Joaquin Valley subregions. The recommended WRF configuration includes use of the Rapid Radiative Transfer Model/Dudhia (or RRTMG) radiation schemes and the Pleim–Xiu land surface physics, combined with a multiscale four-dimensional data assimilation strategy throughout the simulation period to assimilate the available observations, including standard observations from the World Meteorological Organization and local special observations. With the recommended model configuration, WRF is able to simulate the meteorological variables with reasonable error, with the added value, although relatively small, of assimilating the additional BAAQMD local special observations. Mesoscale features, simulated reasonably well for both cases, include the upslope and downslope flows that occur along the mountains that surround the Central Valley of California, as well as the mesoscale eddies that develop within the valley.
- 1 September 2013
- Published by American Meteorological Society in Journal of Applied Meteorology and Climatology
- Vol. 52 (9) , 1953-1973
Application of the Weather Research and Forecasting Model for Air Quality Modeling in the San Francisco Bay Area
The Weather Research and Forecasting (WRF) model is evaluated by conducting various sensitivity experiments over central California including the San Francisco Bay Area (SFBA), with the goal of establishing a WRF model configuration to be used by the Bay Area Air Quality Management District (BAAQMD) for its air quality applications. For the two selected cases, a winter particulate matter case and a summer ozone case, WRF solutions are evaluated both quantitatively by comparing the error statistics and qualitatively by analyzing the model-simulated mesoscale features. Model evaluation is also performed for the SFBA, Sacramento Valley, and San Joaquin Valley subregions. The recommended WRF configuration includes use of the Rapid Radiative Transfer Model/Dudhia (or RRTMG) radiation schemes and the Pleim–Xiu land surface physics, combined with a multiscale four-dimensional data assimilation strategy throughout the simulation period to assimilate the available observations, including standard observations from the World Meteorological Organization and local special observations. With the recommended model configuration, WRF is able to simulate the meteorological variables with reasonable error, with the added value, although relatively small, of assimilating the additional BAAQMD local special observations. Mesoscale features, simulated reasonably well for both cases, include the upslope and downslope flows that occur along the mountains that surround the Central Valley of California, as well as the mesoscale eddies that develop within the valley.