Indera Sakti Nasution
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Indera Sakti Nasution has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Ichwana
Agricultural Engineering Department, Universitas Syiah Kuala, Jalan Tgk. Hasan Krueng Kalee 3, Darussalam-Banda Aceh 23111, Indonesia
2 shared publicationsP Satriyo
Agricultural Mechanization and Workshop Research Centre (PUSMEPTAN), Universitas Syiah Kuala
2 shared publicationsRahmat Fadhil
2 shared publicationsA Alma
Agricultural Engineering Department, Universitas Syiah Kuala, Jalan Tgk. Hasan Krueng Kalee 3, Darussalam-Banda Aceh 23111, Indonesia
1 shared publication- Agus Arip Munawar
Department of Agricultural Engineering, Syiah Kuala University, Banda Aceh, Indonesia
1 shared publication Alfi Syahri Nurazis
Syiah Kuala University
1 shared publication
Latest Publications
- Open Access
- 9 September 2025
- Published by IIUM Press in IIUM Engineering Journal
- Vol. 26  (3) , 397-411
Machining Performance with Respect to Cutting Forces, Vibrations, and Surface Quality in Drilling of Hybrid Abaca and Glass Fibers Reinforced Polymer Composite
Initially, polymer composites utilized synthetic fibers as reinforcements due to their high strength and excellent water resistance. However, synthetic fibers are non-biodegradable, and their manufacturing process involves chemicals, rendering them environmentally unfriendly. Consequently, natural fibers began to be employed owing to their low production costs and inherent biodegradability. Nevertheless, natural fibers possess lower strength and non-uniform sizes, making them challenging to shape. Hybrid composites have been developed to address these limitations, combining synthetic and natural fibers to leverage their respective advantages and mitigate each other's shortcomings. As a result, hybrid composites are increasingly being adopted in various industries, including automotive, construction, sports, and electronics. During production, hybrid composite panels still require machining processes, such as milling to smooth the surface and drilling to create connecting holes, to become final products. Careful selection of machining parameters are needed to ensure product quality and minimize defects, including tool wear, fiber debonding, and delamination. Cutting forces and vibrations, critical factors influencing machining performance, can be regulated through optimized cutting conditions. This study examines the effects of cutting conditions on cutting forces and vibrations while drilling hybrid composites composed of abaca and glass fibers. Composite panels were fabricated using the compression molding method, consisting of 10% abaca fiber, 10% glass fiber, and 80% polyester resin with 1% hardener by weight. Drilling experiments were conducted using a two-flute high-speed steel (HSS) cutting tool under varying spindle speeds and feed rates. The results revealed that cutting parameters significantly influenced machining behaviour. Specifically, higher spindle speeds increased cutting forces by up to approximately 15%, whereas higher feed rates amplified vibration acceleration by up to 67.8%. These findings contribute to a deeper understanding of machining performance and provide valuable insights for optimizing drilling parameters to enhance machining efficiency and surface quality in hybrid natural–synthetic fiber composites. ABSTRAK: Pada mulanya, komposit polimer menggunakan serat sintetik sebagai penguat kerana kekuatannya yang tinggi dan rintangan air terbaik. Walau bagaimanapun, serat sintetik tidak terbiodegradasi, dan proses pembuatannya melibatkan bahan kimia, menjadikannya tidak mesra alam. Akibatnya, serat semula jadi mula digunakan kerana kos pengeluarannya yang rendah dan kebolehbiodegradan. Namun begitu, serat semulajadi mempunyai kekuatan lebih rendah dan saiz tidak seragam, menjadikannya sukar dibentuk. Bagi menangani masalah ini, komposit hibrid dibangunkan, menggabungkan serat sintetik dan semulajadi bagi memanfaatkan kelebihan masing-masing dan mengurangkan kelemahan masing-masing. Hasilnya, komposit hibrid semakin diterima pakai dalam pelbagai industri, termasuk automotif, pembinaan, sukan dan elektronik. Semasa peringkat pengeluaran, panel komposit hibrid masih memerlukan proses pemesinan, seperti milling bagi melicinkan permukaan dan penggerudian bagi mencipta lubang penyambung, sebelum menjadi produk akhir. Pemilihan parameter pemesinan yang teliti diperlukan bagi memastikan kualiti produk dan meminimumkan kecacatan, termasuk haus alat, nyah ikatan gentian dan penyimpangan. Daya pemotongan dan getaran, yang merupakan faktor kritikal mempengaruhi prestasi pemesinan, dapat dikawal melalui keadaan pemotongan yang optimum. Kajian ini mengkaji kesan keadaan pemotongan ke atas daya pemotongan dan getaran semasa penggerudian komposit hibrid yang terdiri daripada serat abaka dan gentian kaca. Panel komposit telah difabrikasi menggunakan kaedah pengacuan mampatan, yang terdiri daripada 10% gentian abaka, 10% gentian kaca, dan 80% resin poliester dengan 1% pengeras mengikut berat. Eksperimen penggerudian telah dijalankan menggunakan alat pemotong keluli berkelajuan tinggi (HSS) dua mata di bawah kelajuan dan kadar suapan berbeza. Dapatan menunjukkan bahawa parameter pemotongan mempengaruhi tingkah laku pemesinan dengan ketara. Khususnya, kelajuan lebih tinggi menyebabkan daya pemotongan meningkat sehingga kira-kira 15%, manakala kadar suapan lebih tinggi menguatkan pecutan getaran sehingga 67.8%. Penemuan ini menyumbang kepada pemahaman yang lebih mendalam tentang prestasi pemesinan dan menyumbang pandangan berharga dalam mengoptimum parameter penggerudian bagi meningkatkan kecekapan pemesinan dan kualiti permukaan komposit serat semulajadi-sintetik hibrid.
- 9 September 2025
- Published by IIUM Press in IIUM Engineering Journal
- Vol. 26  (3) , 397-411
Open AccessMachining Performance with Respect to Cutting Forces, Vibrations, and Surface Quality in Drilling of Hybrid Abaca and Glass Fibers Reinforced Polymer Composite
Initially, polymer composites utilized synthetic fibers as reinforcements due to their high strength and excellent water resistance. However, synthetic fibers are non-biodegradable, and their manufacturing process involves chemicals, rendering them environmentally unfriendly. Consequently, natural fibers began to be employed owing to their low production costs and inherent biodegradability. Nevertheless, natural fibers possess lower strength and non-uniform sizes, making them challenging to shape. Hybrid composites have been developed to address these limitations, combining synthetic and natural fibers to leverage their respective advantages and mitigate each other's shortcomings. As a result, hybrid composites are increasingly being adopted in various industries, including automotive, construction, sports, and electronics. During production, hybrid composite panels still require machining processes, such as milling to smooth the surface and drilling to create connecting holes, to become final products. Careful selection of machining parameters are needed to ensure product quality and minimize defects, including tool wear, fiber debonding, and delamination. Cutting forces and vibrations, critical factors influencing machining performance, can be regulated through optimized cutting conditions. This study examines the effects of cutting conditions on cutting forces and vibrations while drilling hybrid composites composed of abaca and glass fibers. Composite panels were fabricated using the compression molding method, consisting of 10% abaca fiber, 10% glass fiber, and 80% polyester resin with 1% hardener by weight. Drilling experiments were conducted using a two-flute high-speed steel (HSS) cutting tool under varying spindle speeds and feed rates. The results revealed that cutting parameters significantly influenced machining behaviour. Specifically, higher spindle speeds increased cutting forces by up to approximately 15%, whereas higher feed rates amplified vibration acceleration by up to 67.8%. These findings contribute to a deeper understanding of machining performance and provide valuable insights for optimizing drilling parameters to enhance machining efficiency and surface quality in hybrid natural–synthetic fiber composites. ABSTRAK: Pada mulanya, komposit polimer menggunakan serat sintetik sebagai penguat kerana kekuatannya yang tinggi dan rintangan air terbaik. Walau bagaimanapun, serat sintetik tidak terbiodegradasi, dan proses pembuatannya melibatkan bahan kimia, menjadikannya tidak mesra alam. Akibatnya, serat semula jadi mula digunakan kerana kos pengeluarannya yang rendah dan kebolehbiodegradan. Namun begitu, serat semulajadi mempunyai kekuatan lebih rendah dan saiz tidak seragam, menjadikannya sukar dibentuk. Bagi menangani masalah ini, komposit hibrid dibangunkan, menggabungkan serat sintetik dan semulajadi bagi memanfaatkan kelebihan masing-masing dan mengurangkan kelemahan masing-masing. Hasilnya, komposit hibrid semakin diterima pakai dalam pelbagai industri, termasuk automotif, pembinaan, sukan dan elektronik. Semasa peringkat pengeluaran, panel komposit hibrid masih memerlukan proses pemesinan, seperti milling bagi melicinkan permukaan dan penggerudian bagi mencipta lubang penyambung, sebelum menjadi produk akhir. Pemilihan parameter pemesinan yang teliti diperlukan bagi memastikan kualiti produk dan meminimumkan kecacatan, termasuk haus alat, nyah ikatan gentian dan penyimpangan. Daya pemotongan dan getaran, yang merupakan faktor kritikal mempengaruhi prestasi pemesinan, dapat dikawal melalui keadaan pemotongan yang optimum. Kajian ini mengkaji kesan keadaan pemotongan ke atas daya pemotongan dan getaran semasa penggerudian komposit hibrid yang terdiri daripada serat abaka dan gentian kaca. Panel komposit telah difabrikasi menggunakan kaedah pengacuan mampatan, yang terdiri daripada 10% gentian abaka, 10% gentian kaca, dan 80% resin poliester dengan 1% pengeras mengikut berat. Eksperimen penggerudian telah dijalankan menggunakan alat pemotong keluli berkelajuan tinggi (HSS) dua mata di bawah kelajuan dan kadar suapan berbeza. Dapatan menunjukkan bahawa parameter pemotongan mempengaruhi tingkah laku pemesinan dengan ketara. Khususnya, kelajuan lebih tinggi menyebabkan daya pemotongan meningkat sehingga kira-kira 15%, manakala kadar suapan lebih tinggi menguatkan pecutan getaran sehingga 67.8%. Penemuan ini menyumbang kepada pemahaman yang lebih mendalam tentang prestasi pemesinan dan menyumbang pandangan berharga dalam mengoptimum parameter penggerudian bagi meningkatkan kecekapan pemesinan dan kualiti permukaan komposit serat semulajadi-sintetik hibrid.
- Open Access
- 26 January 2024
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung in Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
- Vol. 13  (1) , 250-259
Design and Examination of Yogurt Maker Machine with Sensor Temperature DS18B20
Many commercial yogurt brands do not have a minimum total lactic acid bacteria count (107 CFU/g) due to long distribution with inappropriate storage condition. This leads local producers to produce yogurt. However, commercial yogurt maker machines commonly have a low capacity of 0.5 to 2 L. This study aims to design a yogurt maker machine with a capacity of 15 L with a temperature setting of 37 – 45 ℃. The design and flow system were conducted by arranging the electronic components consisting of 5V 4 channel relay, ESP32 module, DS18B20 temperature sensor, RTC, 12V fan (along with 12 VDC connecting components), 220V heater, 20×4 LCD and plugs (adapter) 220 VAC cable. The yogurt maker machine was evaluated for accuracy of temperature readings (DS18B20 sensor and thermometer), response to incubation time and plain yogurt making. The T-Test was used to compare the differences between the two types of sensors measuring instruments. The results showed that the accuracy of temperature readings using the DS18B20 sensor was better than a thermometer, with a distance scale of 0.35-0.75 ℃ (P-value ≤ 0.05). Temperature testing using milk can be carried out with a temperature range of 37-45 ℃ for 12 h. Keywords: DS18B20, Temperature, Yogurt maker machine, Sensors
- 26 January 2024
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung in Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering)
- Vol. 13  (1) , 250-259
Open AccessDesign and Examination of Yogurt Maker Machine with Sensor Temperature DS18B20
Many commercial yogurt brands do not have a minimum total lactic acid bacteria count (107 CFU/g) due to long distribution with inappropriate storage condition. This leads local producers to produce yogurt. However, commercial yogurt maker machines commonly have a low capacity of 0.5 to 2 L. This study aims to design a yogurt maker machine with a capacity of 15 L with a temperature setting of 37 – 45 ℃. The design and flow system were conducted by arranging the electronic components consisting of 5V 4 channel relay, ESP32 module, DS18B20 temperature sensor, RTC, 12V fan (along with 12 VDC connecting components), 220V heater, 20×4 LCD and plugs (adapter) 220 VAC cable. The yogurt maker machine was evaluated for accuracy of temperature readings (DS18B20 sensor and thermometer), response to incubation time and plain yogurt making. The T-Test was used to compare the differences between the two types of sensors measuring instruments. The results showed that the accuracy of temperature readings using the DS18B20 sensor was better than a thermometer, with a distance scale of 0.35-0.75 ℃ (P-value ≤ 0.05). Temperature testing using milk can be carried out with a temperature range of 37-45 ℃ for 12 h. Keywords: DS18B20, Temperature, Yogurt maker machine, Sensors
- 13 December 2022
- Published by International Information and Engineering Technology Association in Mathematical Modelling of Engineering Problems
- Vol. 9  (5) , 1271-1276
A Low Cost Electronic Nose System for Classification of Gayo Arabica Coffee Roasting Levels Using Stepwise Linear Discriminant and K-Nearest Neighbor
A low-cost electronic nose (E-Nose) system using metal oxide sensor (MOS) was developed for Gayo arabica coffee roasting level. The developed electronic nose was designed to have a simple, rapid detection, as wells as provides reliable results. The E-Nose system is equipped with MOS sensors, sensor chamber, microcontroller, computer, and data acquisition system. The level of coffee roasting was monitored by read the data from the sensors continuously in real time every second. The sensor signals were recorded in Excel file using data acquisition system and analysed using both stepwise linear discrimination and k-nearest neighbor classifiers. A high percentage (91.67%) of accuracy was obtained using stepwise linear discrimination method. Furthermore, k-nearest neighbor classifier using city block distance demonstrated higher accuracy than stepwise linear discrimination classifier. The results showed that the electronic nose system has a potential for assessing Gayo arabica coffee roasting level. The study confirmed that the proposed electronic nose equipped with at least two MOS sensors was suitable for monitoring the level of coffee roasting level. The result could be used for evaluating other varieties of roasted coffee.
- 13 December 2022
- Published by International Information and Engineering Technology Association in Mathematical Modelling of Engineering Problems
- Vol. 9  (5) , 1271-1276
A Low Cost Electronic Nose System for Classification of Gayo Arabica Coffee Roasting Levels Using Stepwise Linear Discriminant and K-Nearest Neighbor
A low-cost electronic nose (E-Nose) system using metal oxide sensor (MOS) was developed for Gayo arabica coffee roasting level. The developed electronic nose was designed to have a simple, rapid detection, as wells as provides reliable results. The E-Nose system is equipped with MOS sensors, sensor chamber, microcontroller, computer, and data acquisition system. The level of coffee roasting was monitored by read the data from the sensors continuously in real time every second. The sensor signals were recorded in Excel file using data acquisition system and analysed using both stepwise linear discrimination and k-nearest neighbor classifiers. A high percentage (91.67%) of accuracy was obtained using stepwise linear discrimination method. Furthermore, k-nearest neighbor classifier using city block distance demonstrated higher accuracy than stepwise linear discrimination classifier. The results showed that the electronic nose system has a potential for assessing Gayo arabica coffee roasting level. The study confirmed that the proposed electronic nose equipped with at least two MOS sensors was suitable for monitoring the level of coffee roasting level. The result could be used for evaluating other varieties of roasted coffee.
- Open Access
- 1 December 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1116  (1) , 012069
Monitoring and performance of stem stalk water hyacinth drying using modified greenhouse dryer
The development of modified greenhouse dryer is the latest drying technology today. The development of dryers with digitalization technology is a necessity in order to increase production efficiency at the farmer/craftsman level. The process of monitoring in the drying room was developed by utilizing data acquisition system technology. Whereas data on temperature, humidity, solar radiation, moisture content were plotted during the drying process. The objective of this study was to monitor the performance of the modified greenhouse dryer of stem stalk water hyacinth (Eichhornia crassipes) based on the Arduino nano microcontroller. The method was divided into three parts: hardware design, programming algorithm development, and dryer performance monitoring. The output of this study is expected to be an alternative method for monitoring of the greenhouse dryer on industrial scale. The results of this study could be an alternative dryer for other agricultural products, the method for monitoring of the dryer in real time will be an important information guiding the farmer during the drying process.
- 1 December 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1116  (1) , 012069
Open AccessMonitoring and performance of stem stalk water hyacinth drying using modified greenhouse dryer
The development of modified greenhouse dryer is the latest drying technology today. The development of dryers with digitalization technology is a necessity in order to increase production efficiency at the farmer/craftsman level. The process of monitoring in the drying room was developed by utilizing data acquisition system technology. Whereas data on temperature, humidity, solar radiation, moisture content were plotted during the drying process. The objective of this study was to monitor the performance of the modified greenhouse dryer of stem stalk water hyacinth (Eichhornia crassipes) based on the Arduino nano microcontroller. The method was divided into three parts: hardware design, programming algorithm development, and dryer performance monitoring. The output of this study is expected to be an alternative method for monitoring of the greenhouse dryer on industrial scale. The results of this study could be an alternative dryer for other agricultural products, the method for monitoring of the dryer in real time will be an important information guiding the farmer during the drying process.
- Open Access
Bio-Nanocomposite Based on Edible Gelatin Film as Active Packaging from Clarias gariepinus Fish Skin with the Addition of Cellulose Nanocrystalline and Nanopropolis
This study develops bio-nano composite gelatin-based edible film (NEF) by combining nanogelatin, cellulose nanocrystal (CNC), and nanopropolis (NP) fillers to improve the resulting film characteristics. The NEF was characterized in terms of thickness, swelling, pH, water content, solubility, vapor and oxygen permeability, mechanical properties, heat resistance, morphology, transparency, and color. The results showed that the thickness and swelling increased significantly, whilst the pH did not significantly differ in each treatment. The water content and the water solubility also showed no significant changes with loadings of both fillers. At the same time, vapor and oxygen permeability decreased with addition of the fillers but were not significantly affected by the loading amounts. The heat resistance properties increased with the filler addition. Tensile strength and Young’s modulus increased for the films loaded with >3% CNC. The elongation at break showed a significant difference together with transparency and color change. The greater the CNC concentration and NP loading were, the darker the resulting transparency and the color of the NEF. Overall results show a considerable improvement in the properties of the resulting NEFs with the incorporation of CNC and NP fillers.
Open AccessBio-Nanocomposite Based on Edible Gelatin Film as Active Packaging from Clarias gariepinus Fish Skin with the Addition of Cellulose Nanocrystalline and Nanopropolis
This study develops bio-nano composite gelatin-based edible film (NEF) by combining nanogelatin, cellulose nanocrystal (CNC), and nanopropolis (NP) fillers to improve the resulting film characteristics. The NEF was characterized in terms of thickness, swelling, pH, water content, solubility, vapor and oxygen permeability, mechanical properties, heat resistance, morphology, transparency, and color. The results showed that the thickness and swelling increased significantly, whilst the pH did not significantly differ in each treatment. The water content and the water solubility also showed no significant changes with loadings of both fillers. At the same time, vapor and oxygen permeability decreased with addition of the fillers but were not significantly affected by the loading amounts. The heat resistance properties increased with the filler addition. Tensile strength and Young’s modulus increased for the films loaded with >3% CNC. The elongation at break showed a significant difference together with transparency and color change. The greater the CNC concentration and NP loading were, the darker the resulting transparency and the color of the NEF. Overall results show a considerable improvement in the properties of the resulting NEFs with the incorporation of CNC and NP fillers.
- Open Access
- 1 August 2021
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 6  (3) , 166-177
Pengaruh Perubahan Iklim Terhadap Jadwal Tanam Dan Produktivitas Padi Sawah Di Daerah Irigasi (DI.) Krueng Aceh Kabupaten Aceh Besar
Abstrak. Tujuan penelitian ini adalah mengetahui pengaruh perubahan iklim yaitu curah hujan, suhu udara, kelembaban terhadap jadwal tanam dan produktivitas padi sawah. Penelitian menggunakan analisis polygon thieesen untuk analisis curah hujan, metode klasifikasi Dauglass H.K. Lee untuk analisis suhu dan kelembaban udara, pengklasifikasian Sichmidt–Ferguson untuk klasifikasi tipe iklim, metode Penman-monteith untuk perhitungan evapotranspirasi potensial dan kebutuhan air tanaman, regresi linear berganda untuk melihat pengaruh perubahan iklim terhadap produktivitas padi sawah, Metode Mock perhitungan debit untuk prediksi jadwal tanam. Hasil penelitian diperoleh curah hujan rata-rata pada Periode I (2000-2009) adalah 1456,28 mm, kemudian meningkat sebesar 518,05 mm pada Periode II (2010-2019) menjadi 1974,33 mm. Suhu mengalami peningkatan sebesar 0.4 oC dari 26.7 oC pada Periode I menjadi 27.1 oC pada Periode II, sedangkan rata-rata kelembaban udara mengalami penurunan dari 83.2 % menjadi 81.1 %. Hasil analisis tipe iklim telah terjadi perubahan iklim pada kawasan Indrapuri dari tipe iklim E (agak kering) curah hujan rata-rata 1.458 mm/tahun ke tipe iklim F (kering) curah hujan rata-rata 2.756 mm/tahun, kawasan Blang Bintang dari Tipe iklim E (agak kering) curah hujan rata-rata 1.453 mm/tahun ke tipe iklim F (kering) curah hujan rata-rata 1.978 mm/tahun, kawasan Sare tetap pada tipe iklim F (kering) dengan curah hujan pada Periode I 2.305 mm/tahun dan pada Periode II 2.095 mm/tahun. Produktivitas tertinggi tahun 2014 dengan jumlah produktivitas 6.87 ton/ha sedangkan produktivitas terendah 4.16 ton/ha pada tahun 2001. Hasil analisis regresi linear berganda diperoleh nilai F hitung dari output dengan nilai signifikan pengaruh jumlah curah rerata tahunan (X1), suhu rerata tahunan (X2) dan kelembaban rerata tahunan (X3) secara simultan terhadap produktivitas padi sawah (Y) adalah 0.014 F tabel sebesar 3.20, maka dapat disimpulkan bahwa variabel bebas jumlah curah rerata tahunan (X1), suhu rerata tahunan (X2) dan kelembaban rerata tahunan (X3) berpengaruh terhadap produktivitas padi sawah (Y). Perubahan variabel iklim ini berdampak pada lingkungan sehingga terjadinya perubahan pola dan jadwal hujan serta jumlah hari hujan yang mempengaruhi debit tersedia yang berdampak bergesernya jadwal tanam seperti yang terjadi pada tahun 2018 jadwal musim tanam (MT1) mulai pada bulan April-juli dan musim tanam kedua (MT2) pada bulan September-desember sedangkan pada tahun 2019 jadwal musim tanam pertama (MT1) jatuh pada bulan Mei-agustus dan musim tanam kedua (MT2) jatuh pada bulan Oktober-januari.The Effect Of Climate Changes On The Planting Schedule And Productivity Of Rice Field In The Irrigation Area (DI.) Krueng Aceh, Aceh Besar DistrictAbstract. The purpose of this research was to determine the effect of climate change, example rainfall, air temperature, humidity on the planting schedule and productivity of lowland rice. The study was conducted using polygon thieesen analysis for rainfall analysis, the Dauglass H.K. Lee for temperature and humidity analysis, Sichmidt-Ferguson classification for climatic type classification and penman-monteith method for calculating potential evapotranspiration and crop water demand, multiple linear regression to see the effect of climate change on lowland rice productivity Mock method of discharge calculation for predicting planting schedules. The results showed that the average rainfall in the first period (2000-2009) was 1456.28 mm, increasing by 518.05 mm in the second period (2010-2019) to 1974.33 mm. The temperature increased by 0.4 oC from 26.7 oC in period I to 27.1 oC in period II, while the average humidity decreased from 83.2% to 81.1%. The results of climate type analysis have occurred climate change in the Indrapuri area, from climate type E (somewhat dry) with average rainfall of 1,458 mm/year to climate type F (dry) with average rainfall of 2,756 mm / year, Blang Bintang area of Type climate E (somewhat dry) average rainfall 1,453 mm / year to F (dry) average rainfall 1,978 mm/year, Sare area remains in climate type F (dry) with rainfall in period I 2,305 mm / year and in the second period 2,095 mm/year. The highest productivity was in 2014 with total productivity of 6.87 tonnes/ha while the lowest productivity was 4.16 tonnes/ha in 2001. The results of multiple linear regression analysis obtained the calculated F value of the output with the sig value of the effect of the total annual average bulk (X1), annual average temperature (X2), and the annual mean humidity (X3) simultaneously on the productivity of lowland rice (Y) is 0.014F table is 3.20. It is concluded that the independent variables are the total annual average bulk (X1), the mean annual temperature (X2), and the mean annual humidity (X3) have an effect on the productivity of lowland rice (Y). Changes in climate variables have an impact on the environment so that changes in rain patterns and schedules, as well as the number of rainy days that affect the available discharge, have an impact on shifting planting schedules such as 2018 planting season schedule (MT1) starting in April-July and the second planting season (MT2) in September-December while in 2019 the first planting season (MT1) falls in May-August and the second planting season falls in October-January.
- 1 August 2021
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 6  (3) , 166-177
Open AccessPengaruh Perubahan Iklim Terhadap Jadwal Tanam Dan Produktivitas Padi Sawah Di Daerah Irigasi (DI.) Krueng Aceh Kabupaten Aceh Besar
Abstrak. Tujuan penelitian ini adalah mengetahui pengaruh perubahan iklim yaitu curah hujan, suhu udara, kelembaban terhadap jadwal tanam dan produktivitas padi sawah. Penelitian menggunakan analisis polygon thieesen untuk analisis curah hujan, metode klasifikasi Dauglass H.K. Lee untuk analisis suhu dan kelembaban udara, pengklasifikasian Sichmidt–Ferguson untuk klasifikasi tipe iklim, metode Penman-monteith untuk perhitungan evapotranspirasi potensial dan kebutuhan air tanaman, regresi linear berganda untuk melihat pengaruh perubahan iklim terhadap produktivitas padi sawah, Metode Mock perhitungan debit untuk prediksi jadwal tanam. Hasil penelitian diperoleh curah hujan rata-rata pada Periode I (2000-2009) adalah 1456,28 mm, kemudian meningkat sebesar 518,05 mm pada Periode II (2010-2019) menjadi 1974,33 mm. Suhu mengalami peningkatan sebesar 0.4 oC dari 26.7 oC pada Periode I menjadi 27.1 oC pada Periode II, sedangkan rata-rata kelembaban udara mengalami penurunan dari 83.2 % menjadi 81.1 %. Hasil analisis tipe iklim telah terjadi perubahan iklim pada kawasan Indrapuri dari tipe iklim E (agak kering) curah hujan rata-rata 1.458 mm/tahun ke tipe iklim F (kering) curah hujan rata-rata 2.756 mm/tahun, kawasan Blang Bintang dari Tipe iklim E (agak kering) curah hujan rata-rata 1.453 mm/tahun ke tipe iklim F (kering) curah hujan rata-rata 1.978 mm/tahun, kawasan Sare tetap pada tipe iklim F (kering) dengan curah hujan pada Periode I 2.305 mm/tahun dan pada Periode II 2.095 mm/tahun. Produktivitas tertinggi tahun 2014 dengan jumlah produktivitas 6.87 ton/ha sedangkan produktivitas terendah 4.16 ton/ha pada tahun 2001. Hasil analisis regresi linear berganda diperoleh nilai F hitung dari output dengan nilai signifikan pengaruh jumlah curah rerata tahunan (X1), suhu rerata tahunan (X2) dan kelembaban rerata tahunan (X3) secara simultan terhadap produktivitas padi sawah (Y) adalah 0.014 F tabel sebesar 3.20, maka dapat disimpulkan bahwa variabel bebas jumlah curah rerata tahunan (X1), suhu rerata tahunan (X2) dan kelembaban rerata tahunan (X3) berpengaruh terhadap produktivitas padi sawah (Y). Perubahan variabel iklim ini berdampak pada lingkungan sehingga terjadinya perubahan pola dan jadwal hujan serta jumlah hari hujan yang mempengaruhi debit tersedia yang berdampak bergesernya jadwal tanam seperti yang terjadi pada tahun 2018 jadwal musim tanam (MT1) mulai pada bulan April-juli dan musim tanam kedua (MT2) pada bulan September-desember sedangkan pada tahun 2019 jadwal musim tanam pertama (MT1) jatuh pada bulan Mei-agustus dan musim tanam kedua (MT2) jatuh pada bulan Oktober-januari.The Effect Of Climate Changes On The Planting Schedule And Productivity Of Rice Field In The Irrigation Area (DI.) Krueng Aceh, Aceh Besar DistrictAbstract. The purpose of this research was to determine the effect of climate change, example rainfall, air temperature, humidity on the planting schedule and productivity of lowland rice. The study was conducted using polygon thieesen analysis for rainfall analysis, the Dauglass H.K. Lee for temperature and humidity analysis, Sichmidt-Ferguson classification for climatic type classification and penman-monteith method for calculating potential evapotranspiration and crop water demand, multiple linear regression to see the effect of climate change on lowland rice productivity Mock method of discharge calculation for predicting planting schedules. The results showed that the average rainfall in the first period (2000-2009) was 1456.28 mm, increasing by 518.05 mm in the second period (2010-2019) to 1974.33 mm. The temperature increased by 0.4 oC from 26.7 oC in period I to 27.1 oC in period II, while the average humidity decreased from 83.2% to 81.1%. The results of climate type analysis have occurred climate change in the Indrapuri area, from climate type E (somewhat dry) with average rainfall of 1,458 mm/year to climate type F (dry) with average rainfall of 2,756 mm / year, Blang Bintang area of Type climate E (somewhat dry) average rainfall 1,453 mm / year to F (dry) average rainfall 1,978 mm/year, Sare area remains in climate type F (dry) with rainfall in period I 2,305 mm / year and in the second period 2,095 mm/year. The highest productivity was in 2014 with total productivity of 6.87 tonnes/ha while the lowest productivity was 4.16 tonnes/ha in 2001. The results of multiple linear regression analysis obtained the calculated F value of the output with the sig value of the effect of the total annual average bulk (X1), annual average temperature (X2), and the annual mean humidity (X3) simultaneously on the productivity of lowland rice (Y) is 0.014F table is 3.20. It is concluded that the independent variables are the total annual average bulk (X1), the mean annual temperature (X2), and the mean annual humidity (X3) have an effect on the productivity of lowland rice (Y). Changes in climate variables have an impact on the environment so that changes in rain patterns and schedules, as well as the number of rainy days that affect the available discharge, have an impact on shifting planting schedules such as 2018 planting season schedule (MT1) starting in April-July and the second planting season (MT2) in September-December while in 2019 the first planting season (MT1) falls in May-August and the second planting season falls in October-January.
- Open Access
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 644  (1) , 012004
Non-destructive measurement of leaf area and leaf number of hydroponic pak-choy plants (Brassica rapa)
Leaf area and leaf number is an important factor in many agronomic and plant physiological studies. The measurements are commonly obtained by destructive and time consuming via laboratory. Therefore, there is a trend in utilizing fast and non-destructive methods to estimate leaf area and leaf number. The aim of this study was to estimate leaf area and leaf number of pak choy (Brassica rapa) under field condition. For this purpose, 180 pots of pak choy plants were captured. Afterward, the images were analysed via image processing. Distance transform-watershed segmentation was used to extract and to separate every leaf from its background. The area of each leaves were estimated according to the pixel values obtained. The area of leaves also compared to the ImageJ measurement. The number of extracted leaves was evaluated according to precision, recall, and f-measure calculation. In conclusion, our system achieves a good performance for minimal occlusion leaves and provides quick and non-destructive method. This method could potentially be applied to design phenotyping system in the greenhouse even for small scale companies.
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 644  (1) , 012004
Open AccessNon-destructive measurement of leaf area and leaf number of hydroponic pak-choy plants (Brassica rapa)
Leaf area and leaf number is an important factor in many agronomic and plant physiological studies. The measurements are commonly obtained by destructive and time consuming via laboratory. Therefore, there is a trend in utilizing fast and non-destructive methods to estimate leaf area and leaf number. The aim of this study was to estimate leaf area and leaf number of pak choy (Brassica rapa) under field condition. For this purpose, 180 pots of pak choy plants were captured. Afterward, the images were analysed via image processing. Distance transform-watershed segmentation was used to extract and to separate every leaf from its background. The area of each leaves were estimated according to the pixel values obtained. The area of leaves also compared to the ImageJ measurement. The number of extracted leaves was evaluated according to precision, recall, and f-measure calculation. In conclusion, our system achieves a good performance for minimal occlusion leaves and provides quick and non-destructive method. This method could potentially be applied to design phenotyping system in the greenhouse even for small scale companies.
- Open Access
- 1 June 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 515  (1) , 012011
Data Acquisition of Multiple Sensors in Greenhouse Using Arduino Platform
Continuous monitoring of environmental parameters is necessary in order to achieve maximum plant growth in a greenhouse system. The aim of this study is to perform a real time data monitoring from multiple sensors in greenhouse using Arduino and Excel add-ins. DHT22 sensors, BH1750 sensor are the main sensors used in this study which give the exact value of temperature, humidity, and light intensity, respectively. Arduino Uno board provides multiple inputs analogs and I/O digitals were utilized to read the data sensor aforementioned that applied for the greenhouse. The level of accuracy of each sensor was compare to the standard device results. The results show that the accuracy of the sensors measurement is very good. This system design is real time, simple and low cost that given ability for user to monitor, collect, and to plot their greenhouse environments data in an Excel sheet.
- 1 June 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 515  (1) , 012011
Open AccessData Acquisition of Multiple Sensors in Greenhouse Using Arduino Platform
Continuous monitoring of environmental parameters is necessary in order to achieve maximum plant growth in a greenhouse system. The aim of this study is to perform a real time data monitoring from multiple sensors in greenhouse using Arduino and Excel add-ins. DHT22 sensors, BH1750 sensor are the main sensors used in this study which give the exact value of temperature, humidity, and light intensity, respectively. Arduino Uno board provides multiple inputs analogs and I/O digitals were utilized to read the data sensor aforementioned that applied for the greenhouse. The level of accuracy of each sensor was compare to the standard device results. The results show that the accuracy of the sensors measurement is very good. This system design is real time, simple and low cost that given ability for user to monitor, collect, and to plot their greenhouse environments data in an Excel sheet.
- Open Access
- 1 May 2020
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 5  (2) , 217-226
Kajian Warna Dan Tekstur Asam Sunti Berdasarkan Variasi Metode Pengeringan
Abstrak. Saat ini para petani di khususnya Provinsi Aceh biasanya mengidentifikasi warna kulit asam sunti dengan menggunakan prosedur analisis warna kulit secara visual dengan segala keterbatasannya. Dengan adanya suatu metode serta teknologi untuk mengidentifikasikan kualitas asam sunti berdasarkan perubahan warna diharapkan dapat meningkatkan standar kualitas asam sunti. Tujuan penelitian ini adalah untuk menentukan nilai indeks warna dan tekstur asam sunti berdasarkan variasi metode pengeringan belimbing wuluh. Belimbing wuluh Umur panen belimbing di atas 40 hari dengan panjang rata - rata 5-7 cm. Sebanyak 140 belimbing wuluh dicuci bersih lalu 70 buah dikeringkans ecara penjemuran di bawah sinar matahari (28,9±1,235 0C ) dan 70 buah dikeringkan dalam oven pada suhu 60°C sampai kadar air 16%bb. Parameter penelitian meliputi kadar air, warna belimbing, nilai pH, dan kekerasan dan pengamatan citra dilakukan menggunakan kamera CCD (Charge Coupled Device). Hasil penelitian menunjukkan bahwa proses pengeringan dengan matahari membutuhkan waktu 4 hari dan menggunakan oven membutuhkan waktu 3 hari. Kandungan kadar air awal belimbing wuluh rata-rata sebesar 94 ± 4,12%. Indeks warna R dan G memiliki hubungan yang erat dengan kadar air dibandingkan dengan indeks warna B. Kemudian indeks warna R dan G memiliki hubungan yang erat dengan kadar air dibandingkan dengan indeks warna B. Hasil penelitian menunjukkan bahwa adanya teknologi pengolahan citra digital ini, mampu digunakan untuk melakukan identifikasi pengaruh metode pengeringan terhadap perubahan warna dan tekstur. Study The Color And Texture of Sunti Aceh Acid based on The Drying Methods Abstract. Presently, the farmers in Aceh Province have identified the quality of sunti Aceh acid by looking visually on its color which is unstandardized yet. With the existence of a method and technology to identify the quality of sunti aceh acid based on the the color properties it is expected to get the information of the quality quickly and precisely. The purpose of this study was to determine the color and texture index values of sunti aceh acid under different drying method e.i. sundrying and oven drying. The bilimbi fruit was harvested after 40 days flowering and the fruit was selected between lengths 5 to tcm. About 140 bilimbi fruits were washed in water, and then about 70 fruits were dried under sundrying (28.9±1.235 0C) and the rest were dried by using oven at temperature 60°C until the moisture of 16%wb. The parameters observed were moisture content, colour, pH value, and hardness. The image processing was conducted by using CCD (Charge Coupled Device). Results showed that the sundrying took time for 4 days whereas the ovendrying took time for 3 days. The initial water content of bilimbi fruit was 94 ± 4.12%. The color index R and G have a close relationship with water content compared to the color index B. Then the color index R and G have a strong relationship with water content compared to the color index B. The presence of this digital image processing technology was able to be used to identify the influence of drying method against the color and texture of sunti aceh acid.
- 1 May 2020
- Published by LPPM Unsyiah in Jurnal Ilmiah Mahasiswa Pertanian
- Vol. 5  (2) , 217-226
Open AccessKajian Warna Dan Tekstur Asam Sunti Berdasarkan Variasi Metode Pengeringan
Abstrak. Saat ini para petani di khususnya Provinsi Aceh biasanya mengidentifikasi warna kulit asam sunti dengan menggunakan prosedur analisis warna kulit secara visual dengan segala keterbatasannya. Dengan adanya suatu metode serta teknologi untuk mengidentifikasikan kualitas asam sunti berdasarkan perubahan warna diharapkan dapat meningkatkan standar kualitas asam sunti. Tujuan penelitian ini adalah untuk menentukan nilai indeks warna dan tekstur asam sunti berdasarkan variasi metode pengeringan belimbing wuluh. Belimbing wuluh Umur panen belimbing di atas 40 hari dengan panjang rata - rata 5-7 cm. Sebanyak 140 belimbing wuluh dicuci bersih lalu 70 buah dikeringkans ecara penjemuran di bawah sinar matahari (28,9±1,235 0C ) dan 70 buah dikeringkan dalam oven pada suhu 60°C sampai kadar air 16%bb. Parameter penelitian meliputi kadar air, warna belimbing, nilai pH, dan kekerasan dan pengamatan citra dilakukan menggunakan kamera CCD (Charge Coupled Device). Hasil penelitian menunjukkan bahwa proses pengeringan dengan matahari membutuhkan waktu 4 hari dan menggunakan oven membutuhkan waktu 3 hari. Kandungan kadar air awal belimbing wuluh rata-rata sebesar 94 ± 4,12%. Indeks warna R dan G memiliki hubungan yang erat dengan kadar air dibandingkan dengan indeks warna B. Kemudian indeks warna R dan G memiliki hubungan yang erat dengan kadar air dibandingkan dengan indeks warna B. Hasil penelitian menunjukkan bahwa adanya teknologi pengolahan citra digital ini, mampu digunakan untuk melakukan identifikasi pengaruh metode pengeringan terhadap perubahan warna dan tekstur. Study The Color And Texture of Sunti Aceh Acid based on The Drying Methods Abstract. Presently, the farmers in Aceh Province have identified the quality of sunti Aceh acid by looking visually on its color which is unstandardized yet. With the existence of a method and technology to identify the quality of sunti aceh acid based on the the color properties it is expected to get the information of the quality quickly and precisely. The purpose of this study was to determine the color and texture index values of sunti aceh acid under different drying method e.i. sundrying and oven drying. The bilimbi fruit was harvested after 40 days flowering and the fruit was selected between lengths 5 to tcm. About 140 bilimbi fruits were washed in water, and then about 70 fruits were dried under sundrying (28.9±1.235 0C) and the rest were dried by using oven at temperature 60°C until the moisture of 16%wb. The parameters observed were moisture content, colour, pH value, and hardness. The image processing was conducted by using CCD (Charge Coupled Device). Results showed that the sundrying took time for 4 days whereas the ovendrying took time for 3 days. The initial water content of bilimbi fruit was 94 ± 4.12%. The color index R and G have a close relationship with water content compared to the color index B. Then the color index R and G have a strong relationship with water content compared to the color index B. The presence of this digital image processing technology was able to be used to identify the influence of drying method against the color and texture of sunti aceh acid.
- Open Access
- 1 January 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 425  (1) , 012069
Internet of things: automatic sprinklers in prototyping greenhouse using smartphone based android
Automatic sprinklers using a soil moisture sensor is formed based on microcontroller technology. The hard- and software system were designed to adapt the greenhouse prototype. The sensors were calibrated by comparing the value with the standard instruments. Observations were conducted on the kale seedsand it monitored for seven days. Based on the observation result, the sensorsable tomeasure temperature, humidity, light intensity, and soil moisture in the greenhouse. The automatic sprinkle pumped the water according to the values of soil moisture sensor. The values of those sensors have been delivered to webserver and android application. Moreover, the system is able to grow the kale plant in the greenhouseprototypevery well.
- 1 January 2020
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 425  (1) , 012069
Open AccessInternet of things: automatic sprinklers in prototyping greenhouse using smartphone based android
Automatic sprinklers using a soil moisture sensor is formed based on microcontroller technology. The hard- and software system were designed to adapt the greenhouse prototype. The sensors were calibrated by comparing the value with the standard instruments. Observations were conducted on the kale seedsand it monitored for seven days. Based on the observation result, the sensorsable tomeasure temperature, humidity, light intensity, and soil moisture in the greenhouse. The automatic sprinkle pumped the water according to the values of soil moisture sensor. The values of those sensors have been delivered to webserver and android application. Moreover, the system is able to grow the kale plant in the greenhouseprototypevery well.