Anggunmeka Luhur Prasasti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anggunmeka Luhur Prasasti has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Ledya Novamizanti
School of Electrical Engineering, Telkom University, Bandung, Indonesia
2 shared publications - Achmad Rizal
Telkom University
1 shared publication - Aditya Firmansyah Hartono
Universitas Telkom
1 shared publication Aidi Mertu
Universitas Telkom
1 shared publication- Ali Fahmi Perwira Negara
Telkom University
1 shared publication Ananda Rendika
Universitas Telkom
1 shared publication
Latest Publications
- Open Access
Compressive Sensing for Multimodal Biomedical Signal: A Systematic Mapping and Literature Review
This study investigated the transformative potential of Compressive Sensing (CS) for optimizing multimodal biomedical signal fusion in Wireless Body Sensor Networks (WBSN), specifically targeting challenges in data storage, power consumption, and transmission bandwidth. Through a Systematic Mapping Study (SMS) and Systematic Literature Review (SLR) following the PRISMA protocol, significant advancements in adaptive CS algorithms and multimodal fusion have been achieved. However, this research also identified crucial gaps in computational efficiency, hardware scalability (particularly concerning the complex and often costly adaptive sensing hardware required for dynamic CS applications), and noise robustness for one-dimensional biomedical signals (e.g., ECG, EEG, PPG, and SCG). The findings strongly emphasize the potential of integrating CS with deep reinforcement learning and edge computing to develop energy-efficient, real-time healthcare monitoring systems, paving the way for future innovations in Internet of Medical Things (IoMT) applications.
Open AccessCompressive Sensing for Multimodal Biomedical Signal: A Systematic Mapping and Literature Review
This study investigated the transformative potential of Compressive Sensing (CS) for optimizing multimodal biomedical signal fusion in Wireless Body Sensor Networks (WBSN), specifically targeting challenges in data storage, power consumption, and transmission bandwidth. Through a Systematic Mapping Study (SMS) and Systematic Literature Review (SLR) following the PRISMA protocol, significant advancements in adaptive CS algorithms and multimodal fusion have been achieved. However, this research also identified crucial gaps in computational efficiency, hardware scalability (particularly concerning the complex and often costly adaptive sensing hardware required for dynamic CS applications), and noise robustness for one-dimensional biomedical signals (e.g., ECG, EEG, PPG, and SCG). The findings strongly emphasize the potential of integrating CS with deep reinforcement learning and edge computing to develop energy-efficient, real-time healthcare monitoring systems, paving the way for future innovations in Internet of Medical Things (IoMT) applications.
- Open Access
- 20 June 2025
- Published by Yayasan Al Mubarak Fil Ilmi in Almufi Jurnal Pengabdian Kepada Masyarakat
- Vol. 5 (1) , 78-86
Monitoring Penggunaan Mesin-Mesin dan Mekanisasi Alat Pertanian pada Balai Pengembangan Mekanisasi Pertanian Provinsi Jawa Barat
Balai Pengembangan Mekanisasi Pertanian adalah sebuah lembaga pemerintah yang berfokus pada pengelolaan alat pertanian yang dipinjamkan oleh pemerintah kepada kelompok tani di Provinsi Jawa Barat. Salah satu permasalahan utama yang dihadapi oleh mitra adalah kurangnya sistem pemantauan yang efisien untuk memastikan penggunaan dan kondisi alat pertanian yang telah dipinjamkan. Dalam kegiatan pengabdian kepada masyarakat, dikembangkan sebuah sistem monitoring berbasis Internet of Things (IoT) guna memantau penggunaan serta kondisi alat pertanian tersebut. Sistem ini memanfaatkan teknologi Global Positioning System (GPS) untuk mendeteksi lokasi alat dan modul komunikasi GSM untuk mengirimkan data secara real-time. Dengan penerapan sistem ini, diharapkan dapat meningkatkan efisiensi penggunaan alat pertanian, mempermudah pemeliharaan berkala, serta mengurangi masalah terkait akuntabilitas dalam pengelolaan alat pertanian. Selain itu, sistem ini juga dapat memperkuat pengawasan terhadap alat pertanian yang telah dipinjamkan, sehingga dapat memastikan alat tetap berfungsi optimal dan mendukung produktivitas pertanian.
- 20 June 2025
- Published by Yayasan Al Mubarak Fil Ilmi in Almufi Jurnal Pengabdian Kepada Masyarakat
- Vol. 5 (1) , 78-86
Open AccessMonitoring Penggunaan Mesin-Mesin dan Mekanisasi Alat Pertanian pada Balai Pengembangan Mekanisasi Pertanian Provinsi Jawa Barat
Balai Pengembangan Mekanisasi Pertanian adalah sebuah lembaga pemerintah yang berfokus pada pengelolaan alat pertanian yang dipinjamkan oleh pemerintah kepada kelompok tani di Provinsi Jawa Barat. Salah satu permasalahan utama yang dihadapi oleh mitra adalah kurangnya sistem pemantauan yang efisien untuk memastikan penggunaan dan kondisi alat pertanian yang telah dipinjamkan. Dalam kegiatan pengabdian kepada masyarakat, dikembangkan sebuah sistem monitoring berbasis Internet of Things (IoT) guna memantau penggunaan serta kondisi alat pertanian tersebut. Sistem ini memanfaatkan teknologi Global Positioning System (GPS) untuk mendeteksi lokasi alat dan modul komunikasi GSM untuk mengirimkan data secara real-time. Dengan penerapan sistem ini, diharapkan dapat meningkatkan efisiensi penggunaan alat pertanian, mempermudah pemeliharaan berkala, serta mengurangi masalah terkait akuntabilitas dalam pengelolaan alat pertanian. Selain itu, sistem ini juga dapat memperkuat pengawasan terhadap alat pertanian yang telah dipinjamkan, sehingga dapat memastikan alat tetap berfungsi optimal dan mendukung produktivitas pertanian.
- Open Access
- 26 February 2023
- Published by Telkom University in [CEPAT] Journal of Computer Engineering: Progress, Application and Technology
- Vol. 2 (01) , 1-8
IoT-Based Banknotes Saving Automation System
Many problems occur with traditional savings, such as users not knowing the nominal amount that has been saved later, and the authenticity of the money saved. To overcome this problem, the "Savings Storage Automation System with IoT-Based Banknotes" tool was created, this tool aims to help users save money easily and safely. The system design is based on Arduino Mega. The inputs on the Arduino Mega consist of a GY-33 TCS34725 as a color sensor and a keypad to perform functions. The output produced is in the form of nominal data of banknotes that can be seen by the user through an LCD and sent to a database, checking the authenticity of the money is done manually by using ultraviolet. The method used to identify the nominal banknotes is based on the reading of each RGB value and color temperature on each nominal banknote. The average accuracy of reading currency values on real banknotes reaches 88%, while in testing counterfeit banknotes it is 14%. Testing execution time when entering money into savings is 3.57 seconds and data to the database is 6.57 seconds.
- 26 February 2023
- Published by Telkom University in [CEPAT] Journal of Computer Engineering: Progress, Application and Technology
- Vol. 2 (01) , 1-8
Open AccessIoT-Based Banknotes Saving Automation System
Many problems occur with traditional savings, such as users not knowing the nominal amount that has been saved later, and the authenticity of the money saved. To overcome this problem, the "Savings Storage Automation System with IoT-Based Banknotes" tool was created, this tool aims to help users save money easily and safely. The system design is based on Arduino Mega. The inputs on the Arduino Mega consist of a GY-33 TCS34725 as a color sensor and a keypad to perform functions. The output produced is in the form of nominal data of banknotes that can be seen by the user through an LCD and sent to a database, checking the authenticity of the money is done manually by using ultraviolet. The method used to identify the nominal banknotes is based on the reading of each RGB value and color temperature on each nominal banknote. The average accuracy of reading currency values on real banknotes reaches 88%, while in testing counterfeit banknotes it is 14%. Testing execution time when entering money into savings is 3.57 seconds and data to the database is 6.57 seconds.
- Open Access
- 21 December 2022
- Published by Universitas Ahmad Dahlan in Jurnal Ilmiah Teknik Elektro Komputer dan Informatika
- Vol. 8 (4) , 565-575
Saving Product Using Blockchain for E-BMT Platform
Baitul Maal Wa At Tamwil (BMT) is a sharia financial institution that provides savings and loan services in accordance with the social, cultural, and economic needs of rural communities, especially in agricultural and plantation communities. The current data management is still using manual recording and a centralized server which can cause fraudulent financial reports and creates a lack of credibility between BMT and its customers. The research method is to decentralize the application data system by using blockchain technology, then replacing the conventional database to blockchain system. The simulation shows that the e-BMT application are connected to blockchain network as intended, users can use metamask to interact with the Ethereum network, the blockchain implementation on e-BMT application has run according to expectations with a 100% success rate with the average transfer time on two devices of 9.47 seconds and 12.13 seconds. While the results of data entry time on two devices obtained an average of 9.96 seconds and 37.09 seconds. While the blockchain implementation on e-BMT could provide access to every user so that each entity could confirm the validity of the transactions, the size of the transactions, and other data recorded on the blockchain without having to develop an integrated database system. The research contributes in two aspects, first, we develop the distributed blockchain system using public Ethereum blockchain network integrated with with popular e-wallet such as metamask, provides easy access for both customers and BMT parties who are connected to the network so that the recorded data can be accessed by anyone, and second, the application of blockchain technology to BMT is capable to interact with users as it is built on a website platform with RESTful API.
- 21 December 2022
- Published by Universitas Ahmad Dahlan in Jurnal Ilmiah Teknik Elektro Komputer dan Informatika
- Vol. 8 (4) , 565-575
Open AccessSaving Product Using Blockchain for E-BMT Platform
Baitul Maal Wa At Tamwil (BMT) is a sharia financial institution that provides savings and loan services in accordance with the social, cultural, and economic needs of rural communities, especially in agricultural and plantation communities. The current data management is still using manual recording and a centralized server which can cause fraudulent financial reports and creates a lack of credibility between BMT and its customers. The research method is to decentralize the application data system by using blockchain technology, then replacing the conventional database to blockchain system. The simulation shows that the e-BMT application are connected to blockchain network as intended, users can use metamask to interact with the Ethereum network, the blockchain implementation on e-BMT application has run according to expectations with a 100% success rate with the average transfer time on two devices of 9.47 seconds and 12.13 seconds. While the results of data entry time on two devices obtained an average of 9.96 seconds and 37.09 seconds. While the blockchain implementation on e-BMT could provide access to every user so that each entity could confirm the validity of the transactions, the size of the transactions, and other data recorded on the blockchain without having to develop an integrated database system. The research contributes in two aspects, first, we develop the distributed blockchain system using public Ethereum blockchain network integrated with with popular e-wallet such as metamask, provides easy access for both customers and BMT parties who are connected to the network so that the recorded data can be accessed by anyone, and second, the application of blockchain technology to BMT is capable to interact with users as it is built on a website platform with RESTful API.
- Open Access
- 1 September 2022
- Published by Kresnamedia Publisher in Jurnal Riset Informatika
- Vol. 4 (4) , 341-346
ALEXNET ARCHITECTURE AND FUZZY ANALYSIS ON TALENT JUDGE DECISION PREDICTION BASED ON FACIAL EXPRESSION
The expression on the human face is a means of non-verbal communication. In the talent search event, the facial expressions shown by the judges when watching the participants' performances became one of the components to see whether the contestant who was performing could qualify for the next round or he would fail. Haar cascade is used to provide the location of the face in the frame and to classify the expressions on the face, a CNN model with modified AlexNet architecture is used which increases the accuracy by 5% from the original alexnet. A fuzzy Algorithm is used to predict the judge's decision based on how many facial expressions appear during the participant's appearance. The decision prediction system for talent search judges based on facial expressions using fuzzy is considered effective in predicting decisions, after being tested the system can predict decisions with an accuracy rate of 83%.
- 1 September 2022
- Published by Kresnamedia Publisher in Jurnal Riset Informatika
- Vol. 4 (4) , 341-346
Open AccessALEXNET ARCHITECTURE AND FUZZY ANALYSIS ON TALENT JUDGE DECISION PREDICTION BASED ON FACIAL EXPRESSION
The expression on the human face is a means of non-verbal communication. In the talent search event, the facial expressions shown by the judges when watching the participants' performances became one of the components to see whether the contestant who was performing could qualify for the next round or he would fail. Haar cascade is used to provide the location of the face in the frame and to classify the expressions on the face, a CNN model with modified AlexNet architecture is used which increases the accuracy by 5% from the original alexnet. A fuzzy Algorithm is used to predict the judge's decision based on how many facial expressions appear during the participant's appearance. The decision prediction system for talent search judges based on facial expressions using fuzzy is considered effective in predicting decisions, after being tested the system can predict decisions with an accuracy rate of 83%.
- Open Access
- 12 December 2021
- Published by Universitas Ahmad Dahlan in Jurnal Ilmiah Teknik Elektro Komputer dan Informatika
- Vol. 7 (3) , 479-490
Mental Health Helper: Intelligent Mobile Apps in the Pandemic Era
Mental Health Helper: Intelligent Mobile Apps in the Pandemic Era
- 12 December 2021
- Published by Universitas Ahmad Dahlan in Jurnal Ilmiah Teknik Elektro Komputer dan Informatika
- Vol. 7 (3) , 479-490
Open AccessMental Health Helper: Intelligent Mobile Apps in the Pandemic Era
Mental Health Helper: Intelligent Mobile Apps in the Pandemic Era
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Automatic First Arrival Picking on P-Wave Seismic Signal Using Support Vector Machine Method
Automatic First Arrival Picking is a system that can get a P-Wave or the first wave that comes in an earthquake wave. Because of the P-Wave is the first wave to come, it needs research that can get the arrival of P-Wave automatically. The aim of this study is to create an Automatic First Arrival Picking system and to test the performance of methods that will later get P-Wave Picking results and also to get the accuracy of the Support Vector Machine (SVM) as its classification method. First, earthquake sample data must go through the Feature Extraction stage so that the feature results can be used as input to the SVM classification method. In this study sample data S-Wave and Noise are considered as No P-Wave, so there are only two classifications in SVM, namely P-Wave and No P-Wave. The results of this research were got an Automatic First Arrival Picking system with an accuracy performance of 88.00%, precision of 90.00%, recall of 73.50%,f1-score of 78.00% with certain time windowing, data partition, and regularization (C) parameter.
- 1 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Automatic First Arrival Picking on P-Wave Seismic Signal Using Support Vector Machine Method
Automatic First Arrival Picking is a system that can get a P-Wave or the first wave that comes in an earthquake wave. Because of the P-Wave is the first wave to come, it needs research that can get the arrival of P-Wave automatically. The aim of this study is to create an Automatic First Arrival Picking system and to test the performance of methods that will later get P-Wave Picking results and also to get the accuracy of the Support Vector Machine (SVM) as its classification method. First, earthquake sample data must go through the Feature Extraction stage so that the feature results can be used as input to the SVM classification method. In this study sample data S-Wave and Noise are considered as No P-Wave, so there are only two classifications in SVM, namely P-Wave and No P-Wave. The results of this research were got an Automatic First Arrival Picking system with an accuracy performance of 88.00%, precision of 90.00%, recall of 73.50%,f1-score of 78.00% with certain time windowing, data partition, and regularization (C) parameter.
- Open Access
- 31 January 2020
- Published by Institut Teknologi Nasional, Bandung in ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika
- Vol. 8 (1) , 95
Perbandingan Ekstraksi Fitur dan Proses Matching pada Autentikasi Sidik Jari Manusia
ABSTRAK Sidik jari merupakan biometrik yang sering digunakan dalam teknologi autentikasi. Terdapat banyak metode yang bisa digunakan untuk membuat sistem klasifikasi sidik jari. Maximum Curvature Points (MCP) umumnya digunakan untuk ekstraksi citra pembuluh darah jari yang juga digunakan sebagai autentikasi. Pada penelitian ini akan diuji performansi dari metode MCP jika dibandingkan dengan metode yang umum digunakan pada proses pengenalan sidik jari, yaitu Hit and Miss Transform (HMT). Perbedaan domain, yaitu spasial pada Normalized Cross Correlation (NCC) dan frekuensi pada Phase Correlation (PC) dalam proses matching ternyata juga mempengaruhi performansi sistem. Hasilnya menunjukkan bahwa penggunakaan metode MHTNCC memiliki tingkat akurasi yang lebih baik dalam pengenalan sidik jari yaitu 92% untuk pengenalan ibu jari dan 98% untuk pengenalan jari telunjuk, dibandingkan dengan menggunakan metode MCP-PC yang hanya memiliki tingkat akurasi sebesar 88% untuk pengenalan ibu jari dan 92% untuk pengenalan jari telunjuk. Kata kunci: sidik jari, MCP, HMT, phase correlation, normalized cross correlation ABSTRACT Fingerprint is one of the biometric systems that are often used in an authentication technology. There are many methods that can be used to develop fingerprint’s classification system. Maximum Curvature Points (MCP) are generally used for finger vein image extraction which is also used as authentication. MCP performance will be compared to common method in finger print recognition, Hit and Miss Transform (HMT). Using different domains, spatial in Normalized Cross Correlation (NCC) and frequency in Phase Correlation (PC) affect the system performance. The results show that the application of HMT-NCC more accurate in terms of finger print’s recognition, 92% in accuracy for thumb recognition and 98% accuracy for index finger recognition, while MCP-PC is only reach 88% in accuracy for thumb recognition and 92% accuracy for index finger recognition. Keywords: fingerprint, MCP, HMT, phase correlation, normalized cross correlation
- 31 January 2020
- Published by Institut Teknologi Nasional, Bandung in ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika
- Vol. 8 (1) , 95
Open AccessPerbandingan Ekstraksi Fitur dan Proses Matching pada Autentikasi Sidik Jari Manusia
ABSTRAK Sidik jari merupakan biometrik yang sering digunakan dalam teknologi autentikasi. Terdapat banyak metode yang bisa digunakan untuk membuat sistem klasifikasi sidik jari. Maximum Curvature Points (MCP) umumnya digunakan untuk ekstraksi citra pembuluh darah jari yang juga digunakan sebagai autentikasi. Pada penelitian ini akan diuji performansi dari metode MCP jika dibandingkan dengan metode yang umum digunakan pada proses pengenalan sidik jari, yaitu Hit and Miss Transform (HMT). Perbedaan domain, yaitu spasial pada Normalized Cross Correlation (NCC) dan frekuensi pada Phase Correlation (PC) dalam proses matching ternyata juga mempengaruhi performansi sistem. Hasilnya menunjukkan bahwa penggunakaan metode MHTNCC memiliki tingkat akurasi yang lebih baik dalam pengenalan sidik jari yaitu 92% untuk pengenalan ibu jari dan 98% untuk pengenalan jari telunjuk, dibandingkan dengan menggunakan metode MCP-PC yang hanya memiliki tingkat akurasi sebesar 88% untuk pengenalan ibu jari dan 92% untuk pengenalan jari telunjuk. Kata kunci: sidik jari, MCP, HMT, phase correlation, normalized cross correlation ABSTRACT Fingerprint is one of the biometric systems that are often used in an authentication technology. There are many methods that can be used to develop fingerprint’s classification system. Maximum Curvature Points (MCP) are generally used for finger vein image extraction which is also used as authentication. MCP performance will be compared to common method in finger print recognition, Hit and Miss Transform (HMT). Using different domains, spatial in Normalized Cross Correlation (NCC) and frequency in Phase Correlation (PC) affect the system performance. The results show that the application of HMT-NCC more accurate in terms of finger print’s recognition, 92% in accuracy for thumb recognition and 98% accuracy for index finger recognition, while MCP-PC is only reach 88% in accuracy for thumb recognition and 92% accuracy for index finger recognition. Keywords: fingerprint, MCP, HMT, phase correlation, normalized cross correlation
- Open Access
- 1 November 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1367 (1) , 012061
Identification of baby cry with Discrete Wavelet Transform, Mel Frequency Cepstral Coefficient and Principal Component Analysis
A baby’s cry is a sign of a baby that shows the feelings and desires of a baby. However, many people misinterpret the baby’s cry so that less precise handling happens often. Based on the research from Dunstan Baby Language (DBL), there are 5 types of languages used by infants namely NEH (Hungry), HEH (Discomfort), EAIRH (Lower Wind/Gas), EH (Burp), and OWH (Tired). This research designed the baby’s voice-based speech processing sound identification system. The baby’s cry is recorded by using the audio record feature on the smartphone then get the extraction feature by using Discrete Wavelet Transform (DWT). DC removal and pre-emphasis stages are needed as pre-process. The sound signal is performed extraction feature by Mel Frequency Cepstral Coefficient (MFCC) and Principal Component Analysis (PCA) methods. The result of the feature extraction will be classified with Euclidean distance to measure the resemblance of the extraction value of each cry by calculating the difference in distance 2 matrices of features. From 150 training data and 50 test data, this system can identify the sound of crying babies on 5 conditions of a baby crying, namely Neh (Hungry), Heh (Discomfort), Eairh (Lower Wind/Gas), Eh (Burp), and Owh (Tired). The best parameter is obtained at a frame size of 1024 data per frame, MFCC feature coefficient of 32, DWT at level 1, and DB 2. This system can detect the baby crying sound with the best accuracy of 90% and computing time 0.5542 seconds.
- 1 November 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1367 (1) , 012061
Open AccessIdentification of baby cry with Discrete Wavelet Transform, Mel Frequency Cepstral Coefficient and Principal Component Analysis
A baby’s cry is a sign of a baby that shows the feelings and desires of a baby. However, many people misinterpret the baby’s cry so that less precise handling happens often. Based on the research from Dunstan Baby Language (DBL), there are 5 types of languages used by infants namely NEH (Hungry), HEH (Discomfort), EAIRH (Lower Wind/Gas), EH (Burp), and OWH (Tired). This research designed the baby’s voice-based speech processing sound identification system. The baby’s cry is recorded by using the audio record feature on the smartphone then get the extraction feature by using Discrete Wavelet Transform (DWT). DC removal and pre-emphasis stages are needed as pre-process. The sound signal is performed extraction feature by Mel Frequency Cepstral Coefficient (MFCC) and Principal Component Analysis (PCA) methods. The result of the feature extraction will be classified with Euclidean distance to measure the resemblance of the extraction value of each cry by calculating the difference in distance 2 matrices of features. From 150 training data and 50 test data, this system can identify the sound of crying babies on 5 conditions of a baby crying, namely Neh (Hungry), Heh (Discomfort), Eairh (Lower Wind/Gas), Eh (Burp), and Owh (Tired). The best parameter is obtained at a frame size of 1024 data per frame, MFCC feature coefficient of 32, DWT at level 1, and DB 2. This system can detect the baby crying sound with the best accuracy of 90% and computing time 0.5542 seconds.
- Open Access
- 31 October 2017
- Published by Duta Wacana Christian University in Jurnal Terapan Teknologi Informasi
- Vol. 1 (2) , 143-153
IMPLEMENTASI DAN ANALISIS KOMPRESI HYBRID PADA CITRA MEDIS DIGITAL HASIL RONTGEN KANKER PAYUDARA
Digital image compression is an attempt to transform the data or symbols of composing digital images into data or other symbols without causing significant changes in the digital image to the human views. The goal is to reduce the redundancy of the data contained in the image so it can be stored or transmitted efficiently. Breast cancer is one of the greatest cancer cases in Indonesia which requires so many digital data x-rays. This research is intended to compress digital X-ray images of breast cancer with more efficient size without altering or reducing its information and it still can be assessed by human view. Using hybrid compression method, they are 2D DCT (Two Dimensional Discret Cosine Transform) and Huffman Method, Medical expert gave 3 of 4 rate when it reach 34.36% compression ratio with 40dB PSNR. This test result used 0 till 3 depth of zero in 2D DCT quantization process.
- 31 October 2017
- Published by Duta Wacana Christian University in Jurnal Terapan Teknologi Informasi
- Vol. 1 (2) , 143-153
Open AccessIMPLEMENTASI DAN ANALISIS KOMPRESI HYBRID PADA CITRA MEDIS DIGITAL HASIL RONTGEN KANKER PAYUDARA
Digital image compression is an attempt to transform the data or symbols of composing digital images into data or other symbols without causing significant changes in the digital image to the human views. The goal is to reduce the redundancy of the data contained in the image so it can be stored or transmitted efficiently. Breast cancer is one of the greatest cancer cases in Indonesia which requires so many digital data x-rays. This research is intended to compress digital X-ray images of breast cancer with more efficient size without altering or reducing its information and it still can be assessed by human view. Using hybrid compression method, they are 2D DCT (Two Dimensional Discret Cosine Transform) and Huffman Method, Medical expert gave 3 of 4 rate when it reach 34.36% compression ratio with 40dB PSNR. This test result used 0 till 3 depth of zero in 2D DCT quantization process.