Thomas Nauser
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Thomas Nauser has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
- Lorenz Gubler
Paul Scherrer Institut
16 shared publications - Tamas Nemeth
Department of Sustainable Energy Technology, SINTEF Industry, 7034 Trondheim, Norway
15 shared publications - Willem Hendrik Koppenol
Department of Chemistry and Applied Biosciences ETH Zürich Zürich Switzerland
7 shared publications - Thomas Justus Schmidt
PSI Center for Energy and Environmental Sciences, Paul Scherrer Institute, Villigen, Switzerland
6 shared publications Tym de Wild
6 shared publications- Tym de Wild
Electrochemical Energy Systems, IMTEK – Department of Microsystems Engineering, University of Freiburg, Georges-Koehler-Allee 103, 79110 Freiburg, Germany
6 shared publications
Latest Publications
- Open Access
- 15 November 2026
- Published by Wiley in Advanced NanoBiomed Research
- p. e70176
A Mechanism of Release of Iron Ions From Magnetite and Its Implications for Fenton Chemistry in Sonodynamic Treatment of Cancer Cells
Adding magnetite (mixed iron(II) and iron(III) oxide) to sonodynamic cancer treatment protocols reportedly enhances cytotoxic effects both in vitro and in vivo. However, the underlying mechanisms, especially those related to the release of Fe(II) and to Fenton chemistry, are poorly understood. Using a combined cell culture and chemical approach, we explore some of these mechanisms and their likely biological significance. We apply an in vitro model of sonodynamic treatment utilizing magnetosomes (bacterially derived magnetite nanoparticles). Magnetosomes alone, while showing similar uptake and subcellular distribution, show toxicity toward sarcoid cells but not toward their non‐neoplastic parental cells. Concomitant low‐intensity ultrasound treatment of the cells under strict avoidance of hyperthermia does not increase toxicity despite generating hydroxyl radical‐associated markers in both cell types. Chemical experiments reveal that Fe(II) is released from magnetosomes by ion exchange against other bivalent cations, rather than by dissolution, which is the commonly perceived mechanism. Hypoxia increases the reaction yield, while sonication accelerates its kinetics. We conclude that ion exchange as the main modality of iron release is a pivotal determinant of Fenton chemistry in sonodynamic therapy protocols with magnetite nanoparticles. This critical aspect, especially related to the timing of ultrasound application, should be given the utmost consideration.
- 15 November 2026
- Published by Wiley in Advanced NanoBiomed Research
- p. e70176
Open AccessA Mechanism of Release of Iron Ions From Magnetite and Its Implications for Fenton Chemistry in Sonodynamic Treatment of Cancer Cells
Adding magnetite (mixed iron(II) and iron(III) oxide) to sonodynamic cancer treatment protocols reportedly enhances cytotoxic effects both in vitro and in vivo. However, the underlying mechanisms, especially those related to the release of Fe(II) and to Fenton chemistry, are poorly understood. Using a combined cell culture and chemical approach, we explore some of these mechanisms and their likely biological significance. We apply an in vitro model of sonodynamic treatment utilizing magnetosomes (bacterially derived magnetite nanoparticles). Magnetosomes alone, while showing similar uptake and subcellular distribution, show toxicity toward sarcoid cells but not toward their non‐neoplastic parental cells. Concomitant low‐intensity ultrasound treatment of the cells under strict avoidance of hyperthermia does not increase toxicity despite generating hydroxyl radical‐associated markers in both cell types. Chemical experiments reveal that Fe(II) is released from magnetosomes by ion exchange against other bivalent cations, rather than by dissolution, which is the commonly perceived mechanism. Hypoxia increases the reaction yield, while sonication accelerates its kinetics. We conclude that ion exchange as the main modality of iron release is a pivotal determinant of Fenton chemistry in sonodynamic therapy protocols with magnetite nanoparticles. This critical aspect, especially related to the timing of ultrasound application, should be given the utmost consideration.
- Open Access
- 5 March 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 674
Chemical resilience of hydrocarbon-based PEMs in fuel cells: effect of aromatic electron density on molecular degradation and in-situ aging
- 5 March 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 674
Open AccessChemical resilience of hydrocarbon-based PEMs in fuel cells: effect of aromatic electron density on molecular degradation and in-situ aging
- Open Access
Photochemical Methods to Study the Radical-Induced Degradation of Anion-Exchange Membranes
We adapted two photochemical methods to generate radicals and assess their impact on anion exchange membrane stability, independent of base-induced degradation. Through the exposure of aqueous solutions of potassium nitrite or suspensions of TiO2 to UV light at 365 nm, we generated hydroxyl radicals or a combination of hydroxyl and superoxide radicals. The methods’ applicability to anion exchange membranes (AEMs) is demonstrated on three commercial AEMs: PiperION-40, FM-FAA-3-PK-75, and PNB-R45. Changes in ion-exchange capacity, along with FT-IR and NMR analyses, revealed significant degradation in thinner, non-reinforced membranes, while thicker and reinforced membranes showed greater resistance. We attribute this to the limited penetration depth of highly reactive radicals into the membrane. Both methods are practical and inexpensive tools for benchmarking AEM stability against radical attack.
Open AccessPhotochemical Methods to Study the Radical-Induced Degradation of Anion-Exchange Membranes
We adapted two photochemical methods to generate radicals and assess their impact on anion exchange membrane stability, independent of base-induced degradation. Through the exposure of aqueous solutions of potassium nitrite or suspensions of TiO2 to UV light at 365 nm, we generated hydroxyl radicals or a combination of hydroxyl and superoxide radicals. The methods’ applicability to anion exchange membranes (AEMs) is demonstrated on three commercial AEMs: PiperION-40, FM-FAA-3-PK-75, and PNB-R45. Changes in ion-exchange capacity, along with FT-IR and NMR analyses, revealed significant degradation in thinner, non-reinforced membranes, while thicker and reinforced membranes showed greater resistance. We attribute this to the limited penetration depth of highly reactive radicals into the membrane. Both methods are practical and inexpensive tools for benchmarking AEM stability against radical attack.
- Open Access
- 3 September 2025
- Published by MDPI AG in Preprints.org
Inexpensive Methods to Study the Radical Induced Degradation of Anion-Exchange Membranes
We adapted two photochemical methods to generate radicals and assess their impact on anion exchange membrane stability, independent of base-induced degradation. By exposure of aqueous solutions of potassium nitrite or suspensions of TiO₂ to UV-light at 365 nm, we generated hydroxyl radicals or a combination of hydroxyl and superoxide radicals. The methods’ applicability to anion exchange membranes (AEMs) is demonstrated on three commercial AEMs: PiperION-40, FM-FAA-3-PK-75, and PNB-R45. Changes in ion-exchange capacity, along with FT-IR, and NMR analyses revealed significant degradation in thinner, non-reinforced membranes, while thicker and reinforced membranes showed greater resistance. We attribute this to the limited penetration depth of highly reactive radicals into the membrane. Both methods are practical and inexpensive tools for benchmarking AEM stability against radical attack.
- 3 September 2025
- Published by MDPI AG in Preprints.org
Open AccessInexpensive Methods to Study the Radical Induced Degradation of Anion-Exchange Membranes
We adapted two photochemical methods to generate radicals and assess their impact on anion exchange membrane stability, independent of base-induced degradation. By exposure of aqueous solutions of potassium nitrite or suspensions of TiO₂ to UV-light at 365 nm, we generated hydroxyl radicals or a combination of hydroxyl and superoxide radicals. The methods’ applicability to anion exchange membranes (AEMs) is demonstrated on three commercial AEMs: PiperION-40, FM-FAA-3-PK-75, and PNB-R45. Changes in ion-exchange capacity, along with FT-IR, and NMR analyses revealed significant degradation in thinner, non-reinforced membranes, while thicker and reinforced membranes showed greater resistance. We attribute this to the limited penetration depth of highly reactive radicals into the membrane. Both methods are practical and inexpensive tools for benchmarking AEM stability against radical attack.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (43) , 2958
Porphyrin-Based Antioxidant for Proton Exchange Membrane Fuel Cells
The increase in regulations on per- and polyfluoroalkyl substances (PFAS) due to health and environmental concerns,1 has resulted in an increasing need for alternatives to polyfluoroalkylsulfonic acid (PFSA) based proton exchange membranes (PEMs). An alternate class of polymers are functionalized polyarylenes, such as sulfonated polyphenylenesulfone (sPPS)2, sulfonated phenylated polyphenylenes (sPPP)3, and the co-polymer sulfonated polyphenylene quinquephenylene (SPP-QP)4. Despite good progress made in reaching comparable performance to Nafion, radical induced degradation of phenyl(sulfonate) rings during fuel cell operation remains prevalent. In a recently published study,5 we investigated the potential of using a Cu(II)-porphyrin complex as an antioxidant for aromatic sulfonate compounds. First, γ-radiolysis was used on aqueous solutions containing the model aromatic compound potassium 4-(tert-butyl)-2-methoxyphenylsulfonate with varying amounts of antioxidant. The exposure of water-based solutions to high-energy radiation results in the formation of hydroxyl radicals, which in turn react with the model compound. Resulting degradation of the compounds was analyzed using high performance liquid chromatography (HPLC). In the second part of the study, we incorporated the Cu(II)-porphyrin into PEMs to test membrane stability during fuel cell operation using an accelerated degradation protocol. The measurements combined with post-mortem analysis show that membranes containing antioxidants have a five-fold increased stability compared to reference non-stabilized membranes. References: (1) Ackerman Grunfeld, D.; Gilbert, D.; Hou, J.; Jones, A. M.; Lee, M. J.; Kibbey, T. C. G.; O’Carroll, D. M. Underestimated Burden of Per- and Polyfluoroalkyl Substances in Global Surface Waters and Groundwaters. Nat. Geosci. 2024, 17 (4), 340–346. https://doi.org/10.1038/s41561-024-01402-8. (2) Araujo, C. C. de; Kreuer, K. D.; Schuster, M.; Portale, G.; Mendil-Jakani, H.; Gebel, G.; Maier, J. Poly(p-Phenylene Sulfone)s with High Ion Exchange Capacity: Ionomers with Unique Microstructural and Transport Features. Phys. Chem. Chem. Phys. 2009, 11 (17), 3305–3312. https://doi.org/10.1039/B822069G. (3) Adamski, M.; Skalski, T. J. G.; Britton, B.; Peckham, T. J.; Metzler, L.; Holdcroft, S. Highly Stable, Low Gas Crossover, Proton-Conducting Phenylated Polyphenylenes. Angew. Chem. Int. Ed. 2017, 56 (31), 9058–9061. https://doi.org/10.1002/anie.201703916. (4) Miyake, J.; Taki, R.; Mochizuki, T.; Shimizu, R.; Akiyama, R.; Uchida, M.; Miyatake, K. Design of Flexible Polyphenylene Proton-Conducting Membrane for next-Generation Fuel Cells. Sci. Adv. 2017, 3 (10), eaao0476. https://doi.org/10.1126/sciadv.aao0476. (5) de Wild, T.; Wurm, J.; Becker, P.; Günther, D.; Nauser, T.; Schmidt, T. J.; Gubler, L.; Nemeth, T. A Nature-Inspired Antioxidant Strategy Based on Porphyrin for Aromatic Hydrocarbon Containing Fuel Cell Membranes**. ChemSusChem 2023, 16 (21), e202300775. https://doi.org/10.1002/cssc.202300775.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (43) , 2958
Porphyrin-Based Antioxidant for Proton Exchange Membrane Fuel Cells
The increase in regulations on per- and polyfluoroalkyl substances (PFAS) due to health and environmental concerns,1 has resulted in an increasing need for alternatives to polyfluoroalkylsulfonic acid (PFSA) based proton exchange membranes (PEMs). An alternate class of polymers are functionalized polyarylenes, such as sulfonated polyphenylenesulfone (sPPS)2, sulfonated phenylated polyphenylenes (sPPP)3, and the co-polymer sulfonated polyphenylene quinquephenylene (SPP-QP)4. Despite good progress made in reaching comparable performance to Nafion, radical induced degradation of phenyl(sulfonate) rings during fuel cell operation remains prevalent. In a recently published study,5 we investigated the potential of using a Cu(II)-porphyrin complex as an antioxidant for aromatic sulfonate compounds. First, γ-radiolysis was used on aqueous solutions containing the model aromatic compound potassium 4-(tert-butyl)-2-methoxyphenylsulfonate with varying amounts of antioxidant. The exposure of water-based solutions to high-energy radiation results in the formation of hydroxyl radicals, which in turn react with the model compound. Resulting degradation of the compounds was analyzed using high performance liquid chromatography (HPLC). In the second part of the study, we incorporated the Cu(II)-porphyrin into PEMs to test membrane stability during fuel cell operation using an accelerated degradation protocol. The measurements combined with post-mortem analysis show that membranes containing antioxidants have a five-fold increased stability compared to reference non-stabilized membranes. References: (1) Ackerman Grunfeld, D.; Gilbert, D.; Hou, J.; Jones, A. M.; Lee, M. J.; Kibbey, T. C. G.; O’Carroll, D. M. Underestimated Burden of Per- and Polyfluoroalkyl Substances in Global Surface Waters and Groundwaters. Nat. Geosci. 2024, 17 (4), 340–346. https://doi.org/10.1038/s41561-024-01402-8. (2) Araujo, C. C. de; Kreuer, K. D.; Schuster, M.; Portale, G.; Mendil-Jakani, H.; Gebel, G.; Maier, J. Poly(p-Phenylene Sulfone)s with High Ion Exchange Capacity: Ionomers with Unique Microstructural and Transport Features. Phys. Chem. Chem. Phys. 2009, 11 (17), 3305–3312. https://doi.org/10.1039/B822069G. (3) Adamski, M.; Skalski, T. J. G.; Britton, B.; Peckham, T. J.; Metzler, L.; Holdcroft, S. Highly Stable, Low Gas Crossover, Proton-Conducting Phenylated Polyphenylenes. Angew. Chem. Int. Ed. 2017, 56 (31), 9058–9061. https://doi.org/10.1002/anie.201703916. (4) Miyake, J.; Taki, R.; Mochizuki, T.; Shimizu, R.; Akiyama, R.; Uchida, M.; Miyatake, K. Design of Flexible Polyphenylene Proton-Conducting Membrane for next-Generation Fuel Cells. Sci. Adv. 2017, 3 (10), eaao0476. https://doi.org/10.1126/sciadv.aao0476. (5) de Wild, T.; Wurm, J.; Becker, P.; Günther, D.; Nauser, T.; Schmidt, T. J.; Gubler, L.; Nemeth, T. A Nature-Inspired Antioxidant Strategy Based on Porphyrin for Aromatic Hydrocarbon Containing Fuel Cell Membranes**. ChemSusChem 2023, 16 (21), e202300775. https://doi.org/10.1002/cssc.202300775.
- Open Access
- 14 March 2024
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 96 (12) , 4952-4959
In Vitro Fossilization for High Spatial Resolution Quantification of Elements in Plant-Tissue Using LA-ICP-TOFMS
Laser ablation in combination with an inductively coupled plasma time-of-flight mass spectrometer (LA-ICP-TOFMS) is an upcoming method for rapid quantitative element mapping of various samples. While widespread in geological applications, quantification of elements in biotissues remains challenging. In this study, a proof-of-concept sample preparation method is presented in which plant-tissues are fossilized in order to solidify the complex biotissue matrix into a mineral-like matrix. This process enables quantification of elements by using silicone as an internal standard for normalization while also providing consistent ablation processes similar to minerals to reduce image blurring. Furthermore, it allows us to generate a quantitative image of the element composition at high spatial resolution. The feasibility of the approach is demonstrated on leaves of sunflowers (Helianthus annuus), soy beans (Glycine max), and corn (Zea mays) as representatives for common crops, which were grown on both nonspiked and cadmium-spiked agricultural soil. The quantitative results achieved during imaging were validated with digestion of whole leaves followed by ICP-OES analysis. LA-ICP-TOFMS element mapping of conventionally dried samples can provide misleading trends due to the irregular ablation behavior of biotissue because high signals caused by high ablation rates are falsely interpreted as enrichment of elements. Fossilization provides the opportunity to correct such phenomena by standardization with Si as an internal standard. The method demonstrated here allows for quantitative image acquisition without time-consuming sample preparation steps by using comparatively safe chemicals. The diversity of tested samples suggests that this sample preparation method is well-suited to achieve reproducible and quantitative element maps of various plant samples.
- 14 March 2024
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 96 (12) , 4952-4959
Open AccessIn Vitro Fossilization for High Spatial Resolution Quantification of Elements in Plant-Tissue Using LA-ICP-TOFMS
Laser ablation in combination with an inductively coupled plasma time-of-flight mass spectrometer (LA-ICP-TOFMS) is an upcoming method for rapid quantitative element mapping of various samples. While widespread in geological applications, quantification of elements in biotissues remains challenging. In this study, a proof-of-concept sample preparation method is presented in which plant-tissues are fossilized in order to solidify the complex biotissue matrix into a mineral-like matrix. This process enables quantification of elements by using silicone as an internal standard for normalization while also providing consistent ablation processes similar to minerals to reduce image blurring. Furthermore, it allows us to generate a quantitative image of the element composition at high spatial resolution. The feasibility of the approach is demonstrated on leaves of sunflowers (Helianthus annuus), soy beans (Glycine max), and corn (Zea mays) as representatives for common crops, which were grown on both nonspiked and cadmium-spiked agricultural soil. The quantitative results achieved during imaging were validated with digestion of whole leaves followed by ICP-OES analysis. LA-ICP-TOFMS element mapping of conventionally dried samples can provide misleading trends due to the irregular ablation behavior of biotissue because high signals caused by high ablation rates are falsely interpreted as enrichment of elements. Fossilization provides the opportunity to correct such phenomena by standardization with Si as an internal standard. The method demonstrated here allows for quantitative image acquisition without time-consuming sample preparation steps by using comparatively safe chemicals. The diversity of tested samples suggests that this sample preparation method is well-suited to achieve reproducible and quantitative element maps of various plant samples.
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (39) , 1917
Radical Attack and Damage Mitigation in Hydrocarbon-Based Ionomers
In an operating polymer electrolyte fuel cell (PEFC) radical intermediates are formed as a result of the interaction of H2 and O2 on the surface of the Pt-based electrocatalyst. Of the various radical intermediates, •OH is of particular concern owing to its high oxidative strength, E°(•OH,H+/H2O) = 2.72 V) [1]. In PFSA ionomers, •OH reacts relatively slowly with the polymer and has a lifetime on the order of microseconds. This leaves sufficient time for additives, such as Ce(III), to scavenge the radicals and thus mitigate radical induced damage of the ionomer. In hydrocarbon-based ionomers containing aromatic units, •OH reacts within nanoseconds with polymer constituents [2]. Radical scavenging can therefore not be effective. In the development of alternative antioxidant strategies for hydrocarbon-based ionomers, it is crucial to elucidate polymer degradation mechanisms triggered by radical attack. In addition to studying the initial reactions of primary radicals, i.e. •OH, it is equally important to characterize the nature of the formed polymer intermediates, their lifetime, stability and reactivity. Sufficiently long-lived intermediates can be repaired by suitable additives, thereby restoring the original ionomer [3]. In the fuel cell, the thus protected membranes show a much lower rate of degradation in an accelerated stress test (AST) at open circuit voltage (OCV) [4]. In this contribution, we provide an overview of methods to study reaction of radicals with small-molecule model compounds and ionomer constituents [5, 6]. The interaction of ionizing radiation (MeV electrons or photons) with water leads to the formation of radicals, such as •OH, at known rates. Water radiolysis can therefore be used to study the kinetics of radical attack and follow-up reactions as a function of pH, electron density of the aromatic ring, and presence of additives. Examples relevant to the acidic conditions in the proton exchange membrane (see Figure, Panel a) as well as the alkaline conditions in an anion exchange membrane (AEM) will be given. Moreover, the use of suitable antioxidants to mitigate degradation through the repair of intermediates will be discussed. Fuel cell tests with hydrocarbon-based membranes containing polymer-bound antioxidants will be shown (see Figure, Panel b) and prospects for long-term stability of non-fluorinated ionomers assessed. Figure caption: a) Analysis of the effect of Ce(III) ions on the extent of degradation of 1 mM of 4-cumenesulfonate (4CS) and 4-(tert-butyl)phenylsulfonate (BPS) at pH 0 (1 M H2SO4) in 1 mM H2O2 upon exposure to a radiolytic dose provided by a 60Co-source of 800 Gy (corresponding to a cumulative amount of •OH of 0.22 mM). ‘Excess degradation’ indicates the difference to the extent of degradation in the absence of Ce(III) and H2O2. Data for BPS from [5]. b) Ohmic resistance of single cells (average of several experiments) with partially fluorinated membrane containing a tethered crown ether with and without Ce(III) metal center during an accelerated stress test. Ion exchange capacity at the end of test was measured to represent remaining membrane state of health. Conditions: open circuit voltage (OCV), H2/O2, 80 °C, 2.5 bara, and 100% R.H. [4]. References: H. A. Schwarz, R. W. Dodson, J. Phys. Chem., 88, 3643 (1984). L. Gubler, W.H. Koppenol, in: The Chemistry of Membranes Used in Fuel Cells: Degradation and Stabilization, S. Schlick (Ed.), 107-138, John Wiley & Sons (2018). T. De Wild, T. Nemeth, T.M. Nolte, T.J. Schmidt, T. Nauser, L. Gubler, J. Electrochem. Soc., 168, 054514 (2021). T. de Wild, T. Nemeth, P. Becker, D. Günther, T. Nauser, T.J. Schmidt, L. Gubler, J. Power Sources 560, 232525 (2023). T. Nemeth, T. de Wild, L. Gubler, T. Nauser, Phys. Chem. Chem. Phys. 24, 2, 895 (2022). T. Nemeth, T. de Wild, L. Gubler, T. Nauser, J. Electrochem. Soc. 169, 054529 (2022). Figure 1
- 22 December 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-02 (39) , 1917
Radical Attack and Damage Mitigation in Hydrocarbon-Based Ionomers
In an operating polymer electrolyte fuel cell (PEFC) radical intermediates are formed as a result of the interaction of H2 and O2 on the surface of the Pt-based electrocatalyst. Of the various radical intermediates, •OH is of particular concern owing to its high oxidative strength, E°(•OH,H+/H2O) = 2.72 V) [1]. In PFSA ionomers, •OH reacts relatively slowly with the polymer and has a lifetime on the order of microseconds. This leaves sufficient time for additives, such as Ce(III), to scavenge the radicals and thus mitigate radical induced damage of the ionomer. In hydrocarbon-based ionomers containing aromatic units, •OH reacts within nanoseconds with polymer constituents [2]. Radical scavenging can therefore not be effective. In the development of alternative antioxidant strategies for hydrocarbon-based ionomers, it is crucial to elucidate polymer degradation mechanisms triggered by radical attack. In addition to studying the initial reactions of primary radicals, i.e. •OH, it is equally important to characterize the nature of the formed polymer intermediates, their lifetime, stability and reactivity. Sufficiently long-lived intermediates can be repaired by suitable additives, thereby restoring the original ionomer [3]. In the fuel cell, the thus protected membranes show a much lower rate of degradation in an accelerated stress test (AST) at open circuit voltage (OCV) [4]. In this contribution, we provide an overview of methods to study reaction of radicals with small-molecule model compounds and ionomer constituents [5, 6]. The interaction of ionizing radiation (MeV electrons or photons) with water leads to the formation of radicals, such as •OH, at known rates. Water radiolysis can therefore be used to study the kinetics of radical attack and follow-up reactions as a function of pH, electron density of the aromatic ring, and presence of additives. Examples relevant to the acidic conditions in the proton exchange membrane (see Figure, Panel a) as well as the alkaline conditions in an anion exchange membrane (AEM) will be given. Moreover, the use of suitable antioxidants to mitigate degradation through the repair of intermediates will be discussed. Fuel cell tests with hydrocarbon-based membranes containing polymer-bound antioxidants will be shown (see Figure, Panel b) and prospects for long-term stability of non-fluorinated ionomers assessed. Figure caption: a) Analysis of the effect of Ce(III) ions on the extent of degradation of 1 mM of 4-cumenesulfonate (4CS) and 4-(tert-butyl)phenylsulfonate (BPS) at pH 0 (1 M H2SO4) in 1 mM H2O2 upon exposure to a radiolytic dose provided by a 60Co-source of 800 Gy (corresponding to a cumulative amount of •OH of 0.22 mM). ‘Excess degradation’ indicates the difference to the extent of degradation in the absence of Ce(III) and H2O2. Data for BPS from [5]. b) Ohmic resistance of single cells (average of several experiments) with partially fluorinated membrane containing a tethered crown ether with and without Ce(III) metal center during an accelerated stress test. Ion exchange capacity at the end of test was measured to represent remaining membrane state of health. Conditions: open circuit voltage (OCV), H2/O2, 80 °C, 2.5 bara, and 100% R.H. [4]. References: H. A. Schwarz, R. W. Dodson, J. Phys. Chem., 88, 3643 (1984). L. Gubler, W.H. Koppenol, in: The Chemistry of Membranes Used in Fuel Cells: Degradation and Stabilization, S. Schlick (Ed.), 107-138, John Wiley & Sons (2018). T. De Wild, T. Nemeth, T.M. Nolte, T.J. Schmidt, T. Nauser, L. Gubler, J. Electrochem. Soc., 168, 054514 (2021). T. de Wild, T. Nemeth, P. Becker, D. Günther, T. Nauser, T.J. Schmidt, L. Gubler, J. Power Sources 560, 232525 (2023). T. Nemeth, T. de Wild, L. Gubler, T. Nauser, Phys. Chem. Chem. Phys. 24, 2, 895 (2022). T. Nemeth, T. de Wild, L. Gubler, T. Nauser, J. Electrochem. Soc. 169, 054529 (2022). Figure 1
- 23 October 2023
- Published by Wiley in ChemSusChem
- Vol. 16 (21)
Front Cover: A Nature‐Inspired Antioxidant Strategy based on Porphyrin for Aromatic Hydrocarbon Containing Fuel Cell Membranes (ChemSusChem 21/2023)
- 23 October 2023
- Published by Wiley in ChemSusChem
- Vol. 16 (21)
Front Cover: A Nature‐Inspired Antioxidant Strategy based on Porphyrin for Aromatic Hydrocarbon Containing Fuel Cell Membranes (ChemSusChem 21/2023)
- 29 September 2023
- Published by The Electrochemical Society in ECS Transactions
- Vol. 112 (4) , 305-313
Radical Attack and Damage Mitigation in Hydrocarbon-Based Ionomers
An antioxidant strategy for aromatic hydrocarbon based proton exchange membranes for fuel cells and electrolyzers requires an understanding of the mechanisms of radical attack and follow-up reactions. We provide experimental evidence that radical scavenging is ineffective. Instead, focus has to be placed on repairing intermediates. Recent studies of exposure of model compounds to radicals formed in a γ-irradiation cell are reported. Fuel cell tests of membranes containing polymer-bound antioxidants with cerium and copper metal complexes show improved chemical stability in an accelerated stress test. Requirements for a successful implementation of a damage-repair mechanism in hydrocarbon membranes are discussed.
- 29 September 2023
- Published by The Electrochemical Society in ECS Transactions
- Vol. 112 (4) , 305-313
Radical Attack and Damage Mitigation in Hydrocarbon-Based Ionomers
An antioxidant strategy for aromatic hydrocarbon based proton exchange membranes for fuel cells and electrolyzers requires an understanding of the mechanisms of radical attack and follow-up reactions. We provide experimental evidence that radical scavenging is ineffective. Instead, focus has to be placed on repairing intermediates. Recent studies of exposure of model compounds to radicals formed in a γ-irradiation cell are reported. Fuel cell tests of membranes containing polymer-bound antioxidants with cerium and copper metal complexes show improved chemical stability in an accelerated stress test. Requirements for a successful implementation of a damage-repair mechanism in hydrocarbon membranes are discussed.