Rongqiang Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rongqiang Li has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Hua-Qin Wang
College of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian, China
3 shared publicationsMei Xiang
College of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian, China
2 shared publicationsPei Yu
College of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian, China
2 shared publications- Bin Zhang
Affiliated Zhumadian Central Hospital of Huanghuai University, Zhumadian 463000, China
1 shared publication Bing Zhao
Affiliated Zhumadian Central Hospital of Huanghuai University, Zhumadian 463000, China
1 shared publication- Feng Zhang
School of Chemistry and Pharmaceutical Engineering, Huanghuai University, Zhumadian 463000, China
1 shared publication
Latest Publications
- Top Cited Papers
- 7 January 2026
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 24 (4) , 829-833
Cu@g-C 3 N 4 heterojunction-catalyzed visible-light-driven direct C–H alkylation of heterocycles
A photocatalytic alkylation of heterocycles using recyclable Cu@g-C 3 N 4 photocatalysts under additive-free conditions was described, featuring high efficiency and a broad substrate scope and enabling heterogeneous catalyst reuse for five cycles.
- 7 January 2026
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 24 (4) , 829-833
Top Cited PapersCu@g-C 3 N 4 heterojunction-catalyzed visible-light-driven direct C–H alkylation of heterocycles
A photocatalytic alkylation of heterocycles using recyclable Cu@g-C 3 N 4 photocatalysts under additive-free conditions was described, featuring high efficiency and a broad substrate scope and enabling heterogeneous catalyst reuse for five cycles.
- 1 January 2026
- Published by Shanghai Institute of Organic Chemistry in Chinese Journal of Organic Chemistry
- Vol. 46 (6) , 2275
Recent Progress in C—H Functionalization of N-Sulfonyl Ketimines
- 1 January 2026
- Published by Shanghai Institute of Organic Chemistry in Chinese Journal of Organic Chemistry
- Vol. 46 (6) , 2275
Recent Progress in C—H Functionalization of N-Sulfonyl Ketimines
- 21 August 2025
- Published by Elsevier in Bioorganic & Medicinal Chemistry
- Vol. 130, 118367
Self-assembled dual-target ibuprofen-irinotecan conjugate for colorectal cancer therapy
- 21 August 2025
- Published by Elsevier in Bioorganic & Medicinal Chemistry
- Vol. 130, 118367
Self-assembled dual-target ibuprofen-irinotecan conjugate for colorectal cancer therapy
- Open Access
- 14 March 2022
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 854664
Synthesis of Hierarchical Porous SAPO-34 and Its Catalytic Activity for 4,6-Dimethyldibenzothiophene
Zeolite SAPO-34 has been widely used in the industry because of its special pore structure and wide distribution of acid sites in the pore channel. However, traditional SAPO-34 with a small pore size suffers from carbon deposition and deactivation in catalytic reactions, and its inability to catalytically convert bulky organic molecules limits its industrial application. Meanwhile, impurities of SAPO-5, which have weak acidity leading to rapid catalyst deactivation, appear in SAPO-34 zeolite. Therefore, it is of great significance to synthesize SAPO-34 zeolite with a mesoporous pore structure, which can significantly improve the transfer of molecules in zeolites. In this paper, SAPO-34 zeolite with a hierarchical pore structure was synthesized, and its hydrodesulfurization performance for 4,6-dimethyldibenzothiophene (4,6-DMDBT) was studied in a fixed bed reactor. The characteristic results show that BET-specific surface area, micropore volume, and mesoporous volume of synthesized SAPO-34 are 754 m2 g−1, 0.25, and 0.23 cm3 g−1 respectively, and the pore size is mainly concentrated at 4 nm. The catalytic conversion of 4,6-DMDMT with Co- and Mo-supported SAPO-34 is about 83%, which is much higher than the catalytic performance of Al2O3.
- 14 March 2022
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 10, 854664
Open AccessSynthesis of Hierarchical Porous SAPO-34 and Its Catalytic Activity for 4,6-Dimethyldibenzothiophene
Zeolite SAPO-34 has been widely used in the industry because of its special pore structure and wide distribution of acid sites in the pore channel. However, traditional SAPO-34 with a small pore size suffers from carbon deposition and deactivation in catalytic reactions, and its inability to catalytically convert bulky organic molecules limits its industrial application. Meanwhile, impurities of SAPO-5, which have weak acidity leading to rapid catalyst deactivation, appear in SAPO-34 zeolite. Therefore, it is of great significance to synthesize SAPO-34 zeolite with a mesoporous pore structure, which can significantly improve the transfer of molecules in zeolites. In this paper, SAPO-34 zeolite with a hierarchical pore structure was synthesized, and its hydrodesulfurization performance for 4,6-dimethyldibenzothiophene (4,6-DMDBT) was studied in a fixed bed reactor. The characteristic results show that BET-specific surface area, micropore volume, and mesoporous volume of synthesized SAPO-34 are 754 m2 g−1, 0.25, and 0.23 cm3 g−1 respectively, and the pore size is mainly concentrated at 4 nm. The catalytic conversion of 4,6-DMDMT with Co- and Mo-supported SAPO-34 is about 83%, which is much higher than the catalytic performance of Al2O3.
- Open Access
- 1 December 2020
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 213, 01030
The Synthesis of Mesoporous TS-1 and Its Performance for Oxidation of Diphenyl Sulfide and Dibenzyl Sulfide
TS-1 zeolite has outstanding performance in the catalytic reactions with hydrogen peroxide as catalytic promoter. However, the narrow pore size (< 1.0 nm) of traditional TS-1 makes it difficult for bulky organic compounds to contact with the active sites in the pores, which seriously limits application of TS-1. Recently, the introduction of mesoporous structure into microporous TS-1 becomes a hot research topic. Meanwhile, the huge synthesis cost of TS-1 is another main reason hindering its industrial application. In this paper, mesoporous TS-1 was successfully synthesized using sodium silicate as silicon source and titanium trichloride as titanium source under the template conditions of tetrapropylammonium hydroxide (TPAOH) and cationic polymer. The mesoporous TS-1 was characterized by X-ray diffraction (XRD), N2 adsorption, scanning electric microscopy (SEM), transmitting electric microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and UV-Vis Spectrum spectra (UV-Vis). Results show that the synthesized TS-1 zeolites have good crystallinity and tetra-coordinated framework Ti atoms, and there are abundant mesoporous structures in the zeolite crystals. The results of oxidation experiments show that conversion of diphenyl sulfide and dibenzyl sulfide with mesoporous TS-1 are 97.3 % and 85.3 % respectively, while that conversion with microporous TS-1 are 75.7 % and 63.5 respectively.
- 1 December 2020
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 213, 01030
Open AccessThe Synthesis of Mesoporous TS-1 and Its Performance for Oxidation of Diphenyl Sulfide and Dibenzyl Sulfide
TS-1 zeolite has outstanding performance in the catalytic reactions with hydrogen peroxide as catalytic promoter. However, the narrow pore size (< 1.0 nm) of traditional TS-1 makes it difficult for bulky organic compounds to contact with the active sites in the pores, which seriously limits application of TS-1. Recently, the introduction of mesoporous structure into microporous TS-1 becomes a hot research topic. Meanwhile, the huge synthesis cost of TS-1 is another main reason hindering its industrial application. In this paper, mesoporous TS-1 was successfully synthesized using sodium silicate as silicon source and titanium trichloride as titanium source under the template conditions of tetrapropylammonium hydroxide (TPAOH) and cationic polymer. The mesoporous TS-1 was characterized by X-ray diffraction (XRD), N2 adsorption, scanning electric microscopy (SEM), transmitting electric microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and UV-Vis Spectrum spectra (UV-Vis). Results show that the synthesized TS-1 zeolites have good crystallinity and tetra-coordinated framework Ti atoms, and there are abundant mesoporous structures in the zeolite crystals. The results of oxidation experiments show that conversion of diphenyl sulfide and dibenzyl sulfide with mesoporous TS-1 are 97.3 % and 85.3 % respectively, while that conversion with microporous TS-1 are 75.7 % and 63.5 respectively.
- Open Access
- 25 September 2020
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
The Effect of Ni-ZSM-5 Catalysts on Catalytic Pyrolysis and Hydro-Pyrolysis of Biomass
With the demand of energy and re-utilization of wastes, the renewable lignocellulosic biomass, has attracted increasing and significant attention for alleviating the growing energy crisis and environment problems. As main components of lignocellulosic biomass, lignin, cellulose, and hemicellulose are connected by hydrogen bond to form a compact skeleton structure, resulting the trenchant condition of biomass pyrolysis. Also, pyrolysis products of above three main constituents contain a large amount of oxygenates that cause low heating value, high corrosiveness, high viscosity, and instability. Meanwhile, zeolites are of considerable significance to the conversion of lignocellulosic biomass to desirable chemical products on account of fine shape selectivity and moderate acid sites and strength. Among numerous zeolites, ZSM-5-based catalysts have been most extensively studied, and the acidity and porosity of ZSM-5 can be tuned by changing the content of Si or Al in zeolite. Beyond that, doping of other metal elements, such as Mn, Co, Ni, Ga, Ce, Pt, into ZSM-5 is also an efficient way to regulate the strength and density of acid sites in zeolite precisely. This review focused on the recent investigation of Ni-modified microporous ZSM-5 used in catalytic pyrolysis of lignin and cellulose. The application of metal-modified hierarchical ZSM-5 is also covered.
- 25 September 2020
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
Open AccessThe Effect of Ni-ZSM-5 Catalysts on Catalytic Pyrolysis and Hydro-Pyrolysis of Biomass
With the demand of energy and re-utilization of wastes, the renewable lignocellulosic biomass, has attracted increasing and significant attention for alleviating the growing energy crisis and environment problems. As main components of lignocellulosic biomass, lignin, cellulose, and hemicellulose are connected by hydrogen bond to form a compact skeleton structure, resulting the trenchant condition of biomass pyrolysis. Also, pyrolysis products of above three main constituents contain a large amount of oxygenates that cause low heating value, high corrosiveness, high viscosity, and instability. Meanwhile, zeolites are of considerable significance to the conversion of lignocellulosic biomass to desirable chemical products on account of fine shape selectivity and moderate acid sites and strength. Among numerous zeolites, ZSM-5-based catalysts have been most extensively studied, and the acidity and porosity of ZSM-5 can be tuned by changing the content of Si or Al in zeolite. Beyond that, doping of other metal elements, such as Mn, Co, Ni, Ga, Ce, Pt, into ZSM-5 is also an efficient way to regulate the strength and density of acid sites in zeolite precisely. This review focused on the recent investigation of Ni-modified microporous ZSM-5 used in catalytic pyrolysis of lignin and cellulose. The application of metal-modified hierarchical ZSM-5 is also covered.
- 28 March 2018
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 296 (5) , 941-949
Self-assembly behavior of amphiphilic polyelectrolyte with ultrahigh charge density
- 28 March 2018
- Published by Springer Nature in Colloid and Polymer Science
- Vol. 296 (5) , 941-949
Self-assembly behavior of amphiphilic polyelectrolyte with ultrahigh charge density