Volodymyr S. Doroshenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Volodymyr S. Doroshenko has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- P. B. Kaliuzhnyi
Physico-Technological Institute of Metals and Alloys of the National Academy of Science of Ukraine, Kyiv, Ukraine
16 shared publications - Olexander Yanchenko9 shared publications
- Vitaly Gnatush
Незалежний аналітик
8 shared publications - Inna Shalevska
Physico-Technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine (Kyiv, Ukraine)
5 shared publications Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine
5 shared publications- Stepan Klymenko
Department of Physical and Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kyiv, Ukraine
5 shared publications
Latest Publications
- 2 November 2026
- Published by Yuzhnoye State Design Office in Kosmičeskaâ tehnika. Raketnoe vooruženie
- Vol. 2026 (1) , 23-29
Thermomechanical fragmentation of shell cases by creating stress concentrators during lost foam casting
The authors substantiate the scientifi c and technological foundations for controlling the behavior of degradation in lightweight single-use shell structures intended for engineering applications, missile hardware, and unmanned aerial vehicles (UAVs). Based on the analysis of operational environments where aerospace objects experience intense vibration and alternating loads, the paper demonstrates the effi ciency of integrating regular systems of stress concentrators directly into the precision metal casting process using expendable patterns. This process is known as Lost Foam Casting (LFC). The scientifi c novelty of the conducted research lies in the substantiation of a generalized geometric criterion for fragmentation, which establishes an analytical relationship between the density of the casting alloy, the shell’s wall thickness, and the area of the section bounded by internal distribution grooves under high-energy structural failure conditions that the “gas wedge” mechanism generates. In contrast to the fi xed parameters of structural failure, the authors propose a mathematical dependence that scales across a wide range of engineering tasks due to the use of casting materials with diverse physical and mechanical properties. The authors propose low-density silicon-aluminum alloys (silumins) for lightweight, yet spatially bulky and rigid fragments weighing 1 to 3 grams, intended to provide elements for the safe directional destruction of aerospace systems’ structures. For the conventional structural failure of steel shells, the parameters for obtaining fragments of 2 to 5 grams from iron-carbon alloys were maintained, while for systems with increased kinetic strength, an algorithm was established to form heavy segments weighing 3 to 10 grams. This engineering solution supports the stable static and dynamic balancing of a fl ying vehicle along its trajectory due to the precise symmetry of internal rifl ing without the machining of castings. The paper presents the results of validating this method experimentally during the manufacturing of thin-walled cylindrical shells using glued polymer models. Additionally, the authors have developed an energy-effi cient, non-pyrotechnic, shockless system for the remote release and separation of elements using expendable low-melting polymer straps. These straps are destroyed via thermal degradation triggered by a low-voltage electrical signal (“electric knife”), eliminatin
- 2 November 2026
- Published by Yuzhnoye State Design Office in Kosmičeskaâ tehnika. Raketnoe vooruženie
- Vol. 2026 (1) , 23-29
Thermomechanical fragmentation of shell cases by creating stress concentrators during lost foam casting
The authors substantiate the scientifi c and technological foundations for controlling the behavior of degradation in lightweight single-use shell structures intended for engineering applications, missile hardware, and unmanned aerial vehicles (UAVs). Based on the analysis of operational environments where aerospace objects experience intense vibration and alternating loads, the paper demonstrates the effi ciency of integrating regular systems of stress concentrators directly into the precision metal casting process using expendable patterns. This process is known as Lost Foam Casting (LFC). The scientifi c novelty of the conducted research lies in the substantiation of a generalized geometric criterion for fragmentation, which establishes an analytical relationship between the density of the casting alloy, the shell’s wall thickness, and the area of the section bounded by internal distribution grooves under high-energy structural failure conditions that the “gas wedge” mechanism generates. In contrast to the fi xed parameters of structural failure, the authors propose a mathematical dependence that scales across a wide range of engineering tasks due to the use of casting materials with diverse physical and mechanical properties. The authors propose low-density silicon-aluminum alloys (silumins) for lightweight, yet spatially bulky and rigid fragments weighing 1 to 3 grams, intended to provide elements for the safe directional destruction of aerospace systems’ structures. For the conventional structural failure of steel shells, the parameters for obtaining fragments of 2 to 5 grams from iron-carbon alloys were maintained, while for systems with increased kinetic strength, an algorithm was established to form heavy segments weighing 3 to 10 grams. This engineering solution supports the stable static and dynamic balancing of a fl ying vehicle along its trajectory due to the precise symmetry of internal rifl ing without the machining of castings. The paper presents the results of validating this method experimentally during the manufacturing of thin-walled cylindrical shells using glued polymer models. Additionally, the authors have developed an energy-effi cient, non-pyrotechnic, shockless system for the remote release and separation of elements using expendable low-melting polymer straps. These straps are destroyed via thermal degradation triggered by a low-voltage electrical signal (“electric knife”), eliminatin
- Open Access
- 3 October 2026
- Published by Elsevier in SSRN Electronic Journal
Interfacial Microstructure and Mechanical Properties of SCh100 Cast Iron–St3sp Steel Macrocomposites via Lost-Foam Casting
Gray cast iron offers excellent castability, machinability, and damping capacity; however, its tensile performance is limited by the stress-concentrating effect of flake graphite. This study investigates the interfacial microstructure and mechanical response of SCh100 gray cast iron macro-composites reinforced with two distinct St3sp steel configurations produced by lost-foam casting: a continuous Zn-coated wire and a perforated steel plate. Bulk chemical analysis, optical metallography, tensile testing, three-point bending, and Brinell hardness measurements were conducted. The wire-reinforced composite exhibited continuous matrix-reinforcement contact under optical examination and a distinct interfacial transition region approximately 140-160 μm thick, accompanied by a broader microstructurally modified region extending into the steel reinforcement. In contrast, the plate-reinforced composite exhibited localized matrix-plate gaps ranging from approximately 5 to 200 μm in the examined cross-sections. The ultimate tensile strength increased from 82.9 MPa for the control casting to 99.5 MPa and 88.7 MPa for the wire-reinforced and plate-reinforced composites, respectively. Similarly, the maximum flexural stress increased from 137.3 MPa for the control material to 239.5 MPa and 197.2 MPa for the wire-reinforced and plate-reinforced composites, respectively. These findings demonstrate a clear association between reinforcement configuration, interfacial contact quality, local microstructural modification, and macroscopic mechanical performance. The continuous Zn-coated wire architecture established a seamless metallurgical bond via transient interfacial fluxing and controlled carbon diffusion. This yielded a 20.0% enhancement in ultimate tensile strength (99.5 MPa) and a 74.4% increase in maximum flexural stress (239.5 MPa) compared to unreinforced SCh100 gray cast iron
- 3 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterfacial Microstructure and Mechanical Properties of SCh100 Cast Iron–St3sp Steel Macrocomposites via Lost-Foam Casting
Gray cast iron offers excellent castability, machinability, and damping capacity; however, its tensile performance is limited by the stress-concentrating effect of flake graphite. This study investigates the interfacial microstructure and mechanical response of SCh100 gray cast iron macro-composites reinforced with two distinct St3sp steel configurations produced by lost-foam casting: a continuous Zn-coated wire and a perforated steel plate. Bulk chemical analysis, optical metallography, tensile testing, three-point bending, and Brinell hardness measurements were conducted. The wire-reinforced composite exhibited continuous matrix-reinforcement contact under optical examination and a distinct interfacial transition region approximately 140-160 μm thick, accompanied by a broader microstructurally modified region extending into the steel reinforcement. In contrast, the plate-reinforced composite exhibited localized matrix-plate gaps ranging from approximately 5 to 200 μm in the examined cross-sections. The ultimate tensile strength increased from 82.9 MPa for the control casting to 99.5 MPa and 88.7 MPa for the wire-reinforced and plate-reinforced composites, respectively. Similarly, the maximum flexural stress increased from 137.3 MPa for the control material to 239.5 MPa and 197.2 MPa for the wire-reinforced and plate-reinforced composites, respectively. These findings demonstrate a clear association between reinforcement configuration, interfacial contact quality, local microstructural modification, and macroscopic mechanical performance. The continuous Zn-coated wire architecture established a seamless metallurgical bond via transient interfacial fluxing and controlled carbon diffusion. This yielded a 20.0% enhancement in ultimate tensile strength (99.5 MPa) and a 74.4% increase in maximum flexural stress (239.5 MPa) compared to unreinforced SCh100 gray cast iron
- Open Access
- 30 September 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 119 (3) , 75-87
Market Overview of Lost Foam Metal Casting and Forecast of Its Growth Until 2033 with Prospects of Development and Technology Digitalization
The article presents a comprehensive analysis of the current state, macroeconomic trends, and technological prospects for the development of the Lost Foam Casting (LFC) process, dedicated to its 70th anniversary. Based on current monitoring data from global analytical agencies Grand View Research and Precedence Research, a stable expansion dynamics of the global LFC market is demonstrated, with a projected compound annual growth rate (CAGR) of 7.2% up to 2033. This growth is driven by the modernization of industrial production lines and the global transition to Industry 4.0 standards. Particular attention is paid to the scientific and technological experience of the Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine in the field of digital transformation of pattern production. The concept of introducing additive manufacturing methods, specifically 3D printing of porous polymer patterns, is considered, which allows eliminating the capital-intensive and time-consuming stage of designing and manufacturing traditional metal tooling (molds). A significant advantage of integrating 3D-printed patterns is justified in terms of the absence of the need to recertify existing foundry shop structures, since the metallurgical essence of the casting process and the certification criteria for the final castings remain unchanged. The unexploited potential of the physicochemical and technological factors of LFC is revealed, including methods for regulating heat dissipation through vacuuming the dry sand mold, the possibility of differentiated heat treatment during melt crystallization, and obtaining ultralight frame-cellular structures based on topological optimization algorithms and artificial intelligence. The features of creating cast-reinforced structures for transport engineering with the integration of strengthening frames up to 15% by weight of the casting directly into the pattern body are described. The specific nature of gas-hydrodynamic processes during intense gasification of the polymer in the contact zone with the reinforcement is highlighted. To stabilize gas pressure, a methodology for controlled gas venting via a system of additional ventilation channels is proposed, ensuring both an increase in the geometric accuracy of castings and a high environmental effect due to the neutralization of hydrocarbon compounds. Keywords: lost foam casting; LFC process; 3D printing of patterns; foundry production digitalization; frame reinforcement of castings; topological optimization.
- 30 September 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 119 (3) , 75-87
Open AccessMarket Overview of Lost Foam Metal Casting and Forecast of Its Growth Until 2033 with Prospects of Development and Technology Digitalization
The article presents a comprehensive analysis of the current state, macroeconomic trends, and technological prospects for the development of the Lost Foam Casting (LFC) process, dedicated to its 70th anniversary. Based on current monitoring data from global analytical agencies Grand View Research and Precedence Research, a stable expansion dynamics of the global LFC market is demonstrated, with a projected compound annual growth rate (CAGR) of 7.2% up to 2033. This growth is driven by the modernization of industrial production lines and the global transition to Industry 4.0 standards. Particular attention is paid to the scientific and technological experience of the Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine in the field of digital transformation of pattern production. The concept of introducing additive manufacturing methods, specifically 3D printing of porous polymer patterns, is considered, which allows eliminating the capital-intensive and time-consuming stage of designing and manufacturing traditional metal tooling (molds). A significant advantage of integrating 3D-printed patterns is justified in terms of the absence of the need to recertify existing foundry shop structures, since the metallurgical essence of the casting process and the certification criteria for the final castings remain unchanged. The unexploited potential of the physicochemical and technological factors of LFC is revealed, including methods for regulating heat dissipation through vacuuming the dry sand mold, the possibility of differentiated heat treatment during melt crystallization, and obtaining ultralight frame-cellular structures based on topological optimization algorithms and artificial intelligence. The features of creating cast-reinforced structures for transport engineering with the integration of strengthening frames up to 15% by weight of the casting directly into the pattern body are described. The specific nature of gas-hydrodynamic processes during intense gasification of the polymer in the contact zone with the reinforcement is highlighted. To stabilize gas pressure, a methodology for controlled gas venting via a system of additional ventilation channels is proposed, ensuring both an increase in the geometric accuracy of castings and a high environmental effect due to the neutralization of hydrocarbon compounds. Keywords: lost foam casting; LFC process; 3D printing of patterns; foundry production digitalization; frame reinforcement of castings; topological optimization.
- Open Access
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
The influence of the microhardness of the structural components of a zero-dimensional CCM of the [Al – FeCr] system on its mechanical characteristics
Based on the analysis of domestic and foreign scientific, technical and patent literature, using the example of silumin of eutectic composition of grade Al4047A EN ISO 18273, the relevance of composite strengthening of cast Al-alloys with powdered materials, in particular with dispersed σ-phase, is revealed. To implement this line of research in practice and, thus, achieve the goal of this research work, its authors planned a series of single-factor experiments. The zero-dimensional cast composite material (CCM) of the [Al – FeCr] system was obtained under conditions of experimental production at the Physico-technological Institute of Metals and Alloys of National Academy of Science of Ukraine. Thanks to metallographic analysis, the authors of the research work showed the microstructure of cast samples. Mechanical tests of composite castings, as well as determination of the microhardness of the structural components of the test material, were carried out using laboratory equipment and equipment, mostly domestically produced. Such equipment includes: an automatic structural microscope-analyzer model “Epiquant” (Germany), a universal hydraulic rupture machine model “Р-50” (Ukraine), a lever-mechanical device for determining hardness according to the Brinell scale model “TШ-2” (Ukraine), and a microhardness tester model “ПMT-3” (Ukraine). The dependence of the mechanical properties of the zero-dimensional CCM of the [Al – FeCr] system on the microhardness of the σ-phase and Me-matrix was studied using the original method proposed at the Physico-technological Institute of Metals and Alloys of National Academy of Science of Ukraine. This technique consisted of determining the specified characteristics in the control plane of the cast sample. It has been experimentally proven that the short-term strength limit, relative elongation, and hardness of composite castings are influenced by the microhardness of their structural components, which, in turn, are affected by the crystallization conditions of cast samples caused by the hydro- and gasdynamics of the process lost-foam casting (LFC-process). Graphical interpretation of experimental data and their mathematical processing allowed us to find out that the zero-dimensional CCM of the [Al – FeCr] system has maximum values of hardness (8.63 × 10-1 GPa), relative elongation (2.0 %) and temporary rupture strength (1.39 × 10-1 GPa) provided that the microhardness of the σ-phase is 8.197 GPa, 5.237 GPa and 8.197 GPa, respectively. The results of the conducted studies also showed that the microhardness of the Me-matrix of the composite casting is 30.9 % higher than the microhardness of the base of Al-alloy of the Al4047A grade.
- 4 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessThe influence of the microhardness of the structural components of a zero-dimensional CCM of the [Al – FeCr] system on its mechanical characteristics
Based on the analysis of domestic and foreign scientific, technical and patent literature, using the example of silumin of eutectic composition of grade Al4047A EN ISO 18273, the relevance of composite strengthening of cast Al-alloys with powdered materials, in particular with dispersed σ-phase, is revealed. To implement this line of research in practice and, thus, achieve the goal of this research work, its authors planned a series of single-factor experiments. The zero-dimensional cast composite material (CCM) of the [Al – FeCr] system was obtained under conditions of experimental production at the Physico-technological Institute of Metals and Alloys of National Academy of Science of Ukraine. Thanks to metallographic analysis, the authors of the research work showed the microstructure of cast samples. Mechanical tests of composite castings, as well as determination of the microhardness of the structural components of the test material, were carried out using laboratory equipment and equipment, mostly domestically produced. Such equipment includes: an automatic structural microscope-analyzer model “Epiquant” (Germany), a universal hydraulic rupture machine model “Р-50” (Ukraine), a lever-mechanical device for determining hardness according to the Brinell scale model “TШ-2” (Ukraine), and a microhardness tester model “ПMT-3” (Ukraine). The dependence of the mechanical properties of the zero-dimensional CCM of the [Al – FeCr] system on the microhardness of the σ-phase and Me-matrix was studied using the original method proposed at the Physico-technological Institute of Metals and Alloys of National Academy of Science of Ukraine. This technique consisted of determining the specified characteristics in the control plane of the cast sample. It has been experimentally proven that the short-term strength limit, relative elongation, and hardness of composite castings are influenced by the microhardness of their structural components, which, in turn, are affected by the crystallization conditions of cast samples caused by the hydro- and gasdynamics of the process lost-foam casting (LFC-process). Graphical interpretation of experimental data and their mathematical processing allowed us to find out that the zero-dimensional CCM of the [Al – FeCr] system has maximum values of hardness (8.63 × 10-1 GPa), relative elongation (2.0 %) and temporary rupture strength (1.39 × 10-1 GPa) provided that the microhardness of the σ-phase is 8.197 GPa, 5.237 GPa and 8.197 GPa, respectively. The results of the conducted studies also showed that the microhardness of the Me-matrix of the composite casting is 30.9 % higher than the microhardness of the base of Al-alloy of the Al4047A grade.
- Open Access
- 31 May 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 32 (2) , 48-60
Reinforcement of castings in lost foam casting process
Based on the analysis of patent solutions for reinforcement methods, the article investigates the technological features of manufacturing reinforced and bimetallic castings using the lost foam casting (LFC) method. The authors analyze the drawbacks of traditional reinforcement methods in hollow sand molds, the most critical of which are the difficulty of spatial fixation of the reinforcement, the risks of displacement of its elements during mold tilting or transportation, and the high probability of destruction of the sand mold surface when mounting the reinforcement to its walls. The concept of using a polymer pattern not only as a shaping element but also as a reliable mounting base is substantiated. This approach allows for the integration of reinforcing components directly into the pattern body, ensuring high positioning accuracy in the future casting. The dual functional role of the reinforcing elements is noted: in addition to mechanical strengthening, they act as internal micro-chillers, which allows for effective control of crystallization processes, refinement of the metal structure, and minimization of shrinkage defects in massive sections. Attention is also paid to the synergy of the LFC process with additive technologies. The use of 3D printing of polymer patterns makes it possible to create internal niches in the pattern and place reinforcement in them with high geometric precision. The paper presents the practical implementation of this technique on the example of the development of a cast armored barrier with integrated spring elements. The mechanism of the TRIP effect (transformation-induced plasticity) realization for hardened iron-carbon alloys is described, where spring structures act as accumulators of phase transformation energy, which increases the survivability of the structure under dynamic and impact loads. The proposed technology opens up new opportunities for the production of lightweight metal products with differentiated properties, intelligent means of passive protection, and highly loaded mechanical engineering parts.
- 31 May 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 32 (2) , 48-60
Open AccessReinforcement of castings in lost foam casting process
Based on the analysis of patent solutions for reinforcement methods, the article investigates the technological features of manufacturing reinforced and bimetallic castings using the lost foam casting (LFC) method. The authors analyze the drawbacks of traditional reinforcement methods in hollow sand molds, the most critical of which are the difficulty of spatial fixation of the reinforcement, the risks of displacement of its elements during mold tilting or transportation, and the high probability of destruction of the sand mold surface when mounting the reinforcement to its walls. The concept of using a polymer pattern not only as a shaping element but also as a reliable mounting base is substantiated. This approach allows for the integration of reinforcing components directly into the pattern body, ensuring high positioning accuracy in the future casting. The dual functional role of the reinforcing elements is noted: in addition to mechanical strengthening, they act as internal micro-chillers, which allows for effective control of crystallization processes, refinement of the metal structure, and minimization of shrinkage defects in massive sections. Attention is also paid to the synergy of the LFC process with additive technologies. The use of 3D printing of polymer patterns makes it possible to create internal niches in the pattern and place reinforcement in them with high geometric precision. The paper presents the practical implementation of this technique on the example of the development of a cast armored barrier with integrated spring elements. The mechanism of the TRIP effect (transformation-induced plasticity) realization for hardened iron-carbon alloys is described, where spring structures act as accumulators of phase transformation energy, which increases the survivability of the structure under dynamic and impact loads. The proposed technology opens up new opportunities for the production of lightweight metal products with differentiated properties, intelligent means of passive protection, and highly loaded mechanical engineering parts.
- 29 May 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Casting Processes
- Vol. 164 (2) , 78-97
СВІТОВИЙ РИНОК МЕТАЛЕВИХ ВИЛИВКІВ У 2022–2025 РОКАХ: ТЕНДЕНЦІЇ, ВИКЛИКИ, ТРАНСФОРМАЦІЇ
- 29 May 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Casting Processes
- Vol. 164 (2) , 78-97
СВІТОВИЙ РИНОК МЕТАЛЕВИХ ВИЛИВКІВ У 2022–2025 РОКАХ: ТЕНДЕНЦІЇ, ВИКЛИКИ, ТРАНСФОРМАЦІЇ
- 31 March 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 32 (1) , 46-54
Casting of shell casings with controlled fragmentation geometry
A method for casting shell cases for technical purposes with a predicted nature of destruction has been substantiated and developed. The relevance of the research is driven by the need to create lightweight metal structures capable of controlled fragmentation into elements of a given mass under intensive high-energy impact, which is critical for single-use systems. Since traditional mechanical execution of grooves on the internal cavities of thin-walled bodies is economically inefficient and technologically complex, it is practically not used in mass production. The scientific novelty of the study lies in the mathematical substantiation of a geometric fragmentation criterion, which establishes an analytical relationship between the metal density, wall thickness, and the area of the section bounded by distribution grooves. The proposed criterion allows, at the design stage of the pattern tooling, to ensure the formation of fragments in the optimal mass range of 2 to 5 grams. This meets the requirements of functional efficiency through the implementation of the "gas wedge" physical effect. The paper describes the technological process of implementing the method using Lost Foam Casting (LFC). It is proved that the use of polymer patterns allows for the precise transfer of the complex geometry of stress concentrators from the mold directly into the casting, ensuring high surface quality and dimensional accuracy. Practical approbation of the method using the example of manufacturing cylindrical shell bodies from gray cast iron confirmed the possibility of producing a ribbed internal surface of the casting. The possibility of integrating such products with modern autonomous transport systems is considered, and a method for automatic unloading based on polymer fasteners that are thermally destroyed by an electrical signal is developed. The integrated approach, combining precision casting of bodies and innovative delivery methods, allows for reducing the metal consumption of production and increasing the efficiency of autonomous transport systems.
- 31 March 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 32 (1) , 46-54
Casting of shell casings with controlled fragmentation geometry
A method for casting shell cases for technical purposes with a predicted nature of destruction has been substantiated and developed. The relevance of the research is driven by the need to create lightweight metal structures capable of controlled fragmentation into elements of a given mass under intensive high-energy impact, which is critical for single-use systems. Since traditional mechanical execution of grooves on the internal cavities of thin-walled bodies is economically inefficient and technologically complex, it is practically not used in mass production. The scientific novelty of the study lies in the mathematical substantiation of a geometric fragmentation criterion, which establishes an analytical relationship between the metal density, wall thickness, and the area of the section bounded by distribution grooves. The proposed criterion allows, at the design stage of the pattern tooling, to ensure the formation of fragments in the optimal mass range of 2 to 5 grams. This meets the requirements of functional efficiency through the implementation of the "gas wedge" physical effect. The paper describes the technological process of implementing the method using Lost Foam Casting (LFC). It is proved that the use of polymer patterns allows for the precise transfer of the complex geometry of stress concentrators from the mold directly into the casting, ensuring high surface quality and dimensional accuracy. Practical approbation of the method using the example of manufacturing cylindrical shell bodies from gray cast iron confirmed the possibility of producing a ribbed internal surface of the casting. The possibility of integrating such products with modern autonomous transport systems is considered, and a method for automatic unloading based on polymer fasteners that are thermally destroyed by an electrical signal is developed. The integrated approach, combining precision casting of bodies and innovative delivery methods, allows for reducing the metal consumption of production and increasing the efficiency of autonomous transport systems.
- Open Access
- 30 March 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 23 (1) , 34-41
Development of the metal-sand composite casting method using polymer patterns in the context of modern composite materials systematization
In the context of the dynamic development of Composite Materials (CMCs), their scientific systematization is critically necessary, as traditional classification approaches are insufficient for effectively predicting operational properties during the design of such materials. The first part of the work presents a multi-factor, multi-level CMC systematization scheme. This block diagram reflects the interrelation of technological, structural, and functional aspects of material creation, serving as a methodological basis for positioning research objects within the modern system of materials science. Based on the systematization, a method for casting Metal-Sand Cast Composite Materials (LCMCs) using the Lost Foam Casting (LFC) process was developed. The goal was to overcome the limitations of the LFC process in obtaining structural CMCs with closed, non-metallic, filled cells, and to reduce production cost by optimizing core tooling. The essence of the innovation is the fundamentally new use of the polymer pattern as a combined molding and core tooling (carrier). The pattern is used to form sand cores from a sand-liquid glass mixture (CO2-process), which are held in the mold and remain in the LCMC body. This eliminates the need for expensive traditional core tooling, significantly increasing the economic efficiency of the process. The developed method utilizes thin-walled polymer shells made from Expanded Polystyrene (EPS), PLA by 3D printing, or thermoforming. The feature utilized is that for printed patterns, gas-forming capacity can be regulated by changing the wall thickness and using the integrated sand core as an internal spacer. The resulting metal-sand composite (cores with a density of 1.6…2.0 g/cm³ in a matrix with a density of >7.0 g/cm³) shows a significant reduction in the product's mass without loss of strength. Accelerated metal crystallization due to reduced wall thickness promotes the formation of a fine-grained, high-strength structure. The reinforcement provides the casting with additional functional properties, particularly increased resistance to impulsive penetrating destruction, which is critical for anti-armor obstacles and protective structures. The method is technologically flexible, allowing for the production of both metal-sand CMC and a hollow metallic cell-framework product. The technology is designed for the development of lightweight modules for the rapid construction of protective structures.
- 30 March 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 23 (1) , 34-41
Open AccessDevelopment of the metal-sand composite casting method using polymer patterns in the context of modern composite materials systematization
In the context of the dynamic development of Composite Materials (CMCs), their scientific systematization is critically necessary, as traditional classification approaches are insufficient for effectively predicting operational properties during the design of such materials. The first part of the work presents a multi-factor, multi-level CMC systematization scheme. This block diagram reflects the interrelation of technological, structural, and functional aspects of material creation, serving as a methodological basis for positioning research objects within the modern system of materials science. Based on the systematization, a method for casting Metal-Sand Cast Composite Materials (LCMCs) using the Lost Foam Casting (LFC) process was developed. The goal was to overcome the limitations of the LFC process in obtaining structural CMCs with closed, non-metallic, filled cells, and to reduce production cost by optimizing core tooling. The essence of the innovation is the fundamentally new use of the polymer pattern as a combined molding and core tooling (carrier). The pattern is used to form sand cores from a sand-liquid glass mixture (CO2-process), which are held in the mold and remain in the LCMC body. This eliminates the need for expensive traditional core tooling, significantly increasing the economic efficiency of the process. The developed method utilizes thin-walled polymer shells made from Expanded Polystyrene (EPS), PLA by 3D printing, or thermoforming. The feature utilized is that for printed patterns, gas-forming capacity can be regulated by changing the wall thickness and using the integrated sand core as an internal spacer. The resulting metal-sand composite (cores with a density of 1.6…2.0 g/cm³ in a matrix with a density of >7.0 g/cm³) shows a significant reduction in the product's mass without loss of strength. Accelerated metal crystallization due to reduced wall thickness promotes the formation of a fine-grained, high-strength structure. The reinforcement provides the casting with additional functional properties, particularly increased resistance to impulsive penetrating destruction, which is critical for anti-armor obstacles and protective structures. The method is technologically flexible, allowing for the production of both metal-sand CMC and a hollow metallic cell-framework product. The technology is designed for the development of lightweight modules for the rapid construction of protective structures.
- 6 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
Improvement of the Casting Technology for Steel Bucket Tooth according to Lost Foam Casting using Computer Simulation
The research aims to improve the lost foam casting technology for producing steel bucket teeth for excavators. The relevance of this work lies in the need to enhance the quality of castings in challenging operating conditions, as well as to expand the application of advanced casting technologies within the domestic industry. When analysing the process of manufacturing steel bucket teeth using the lost foam technique, the presence of defects in the castings in the form of shrinkage cavities and gas porosity was detected. Using Flow-3D Cast software, computer simulations of the filling and solidification processes of metal were carried out for two variants of the gating-feeding system, the design of which significantly affects the formation of the quality of castings. The simulation results allowed us to analyse the features of the mold filling with metal for the basic version of the gating-feeding system, identify the risks of gasification products entrapment, and assess the effectiveness of the casting feeding during solidification. Based on the data obtained, an improved design of the gating-feeding system was selected to form a high-quality casting without shrinkage defects. The importance of using polystyrene foam patterns with an optimal density (within 25-30 kg/m³) to minimise the negative consequences of their gasification was also shown. The need to install risers on the patterns that perform the function of “overflows” was substantiated, helping to prevent the formation of defects in the casting. A pilot batch of castings confirmed the effectiveness of the developed technological solutions, which provided the basis for their introduction into the serial production of bucket teeth.
- 6 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
Improvement of the Casting Technology for Steel Bucket Tooth according to Lost Foam Casting using Computer Simulation
The research aims to improve the lost foam casting technology for producing steel bucket teeth for excavators. The relevance of this work lies in the need to enhance the quality of castings in challenging operating conditions, as well as to expand the application of advanced casting technologies within the domestic industry. When analysing the process of manufacturing steel bucket teeth using the lost foam technique, the presence of defects in the castings in the form of shrinkage cavities and gas porosity was detected. Using Flow-3D Cast software, computer simulations of the filling and solidification processes of metal were carried out for two variants of the gating-feeding system, the design of which significantly affects the formation of the quality of castings. The simulation results allowed us to analyse the features of the mold filling with metal for the basic version of the gating-feeding system, identify the risks of gasification products entrapment, and assess the effectiveness of the casting feeding during solidification. Based on the data obtained, an improved design of the gating-feeding system was selected to form a high-quality casting without shrinkage defects. The importance of using polystyrene foam patterns with an optimal density (within 25-30 kg/m³) to minimise the negative consequences of their gasification was also shown. The need to install risers on the patterns that perform the function of “overflows” was substantiated, helping to prevent the formation of defects in the casting. A pilot batch of castings confirmed the effectiveness of the developed technological solutions, which provided the basis for their introduction into the serial production of bucket teeth.
- Open Access
- 9 February 2026
- Published by Science Publishing Group in Science Discovery Materials
- Vol. 1 (1) , 50-58
3D Design and Printing of Polymer Patterns for Their Gasification in Metal Casting
In the context of market instability and increasing variability in consumer demands, the relevance of on-demand manufacturing is growing significantly, with additive manufacturing (3D printing) becoming a key tool for its implementation. Specifically, introducing 3D printing into the foundry industry allows for the production of metal castings with complex configurations, often impossible using traditional methods. This study aims to analyze and test an innovative algorithm for the digital design of porous metamaterials from Spherene Inc., with the goal of minimizing mass and controlling the properties of 3D-printed casting patterns for the Lost Foam Casting (LFC) process. Analysis methods included investigating the theoretical aspects of triply periodic minimal surfaces and their application in the Rhinoceros software environment for modeling unique porous structures. We designed and printed experimental polymer pattern parts, controlling parameters such as density, wall thickness, and open pore geometry. The results showed that the developed approach allows for the creation of lightweight yet strong patterns with spherical cavities and translational porosity, which is crucial for optimizing the gasification process. This porosity enables effective vacuum application from the casting mold to the pattern body, with directed gas removal. This minimizes the negative impact of gasification products on casting quality and allows for the use of the vacuum suction effect for metal. The practical value of this 3D printing research lies in significantly reducing the design and production time for casting patterns, increasing the adaptability of foundry enterprises to market changes, and implementing the "on-demand" manufacturing concept through the use of high-precision 3D-printed patterns compatible with existing LFC equipment.
- 9 February 2026
- Published by Science Publishing Group in Science Discovery Materials
- Vol. 1 (1) , 50-58
Open Access3D Design and Printing of Polymer Patterns for Their Gasification in Metal Casting
In the context of market instability and increasing variability in consumer demands, the relevance of on-demand manufacturing is growing significantly, with additive manufacturing (3D printing) becoming a key tool for its implementation. Specifically, introducing 3D printing into the foundry industry allows for the production of metal castings with complex configurations, often impossible using traditional methods. This study aims to analyze and test an innovative algorithm for the digital design of porous metamaterials from Spherene Inc., with the goal of minimizing mass and controlling the properties of 3D-printed casting patterns for the Lost Foam Casting (LFC) process. Analysis methods included investigating the theoretical aspects of triply periodic minimal surfaces and their application in the Rhinoceros software environment for modeling unique porous structures. We designed and printed experimental polymer pattern parts, controlling parameters such as density, wall thickness, and open pore geometry. The results showed that the developed approach allows for the creation of lightweight yet strong patterns with spherical cavities and translational porosity, which is crucial for optimizing the gasification process. This porosity enables effective vacuum application from the casting mold to the pattern body, with directed gas removal. This minimizes the negative impact of gasification products on casting quality and allows for the use of the vacuum suction effect for metal. The practical value of this 3D printing research lies in significantly reducing the design and production time for casting patterns, increasing the adaptability of foundry enterprises to market changes, and implementing the "on-demand" manufacturing concept through the use of high-precision 3D-printed patterns compatible with existing LFC equipment.