Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ayman Abdulhadi Abdulmawjoud has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of Proposed Railroad Tracks Compared with an Optimized Route Using the Analytic Hierarchy Process and GIS Techniques

    by Ayman A. Abdulmawjoud, Aseel Ibrahim Matti

    Selecting a railway route location is a complex task that requires significant time and effort. This study outlines the application of the Analytic Hierarchy Process (AHP) with a Geographic Information System (GIS) to define the best path and compare it with the proposed tracks. The route starts from Mosul in northern Iraq and ends in Fishkhabour near the Iraqi-Syrian-Turkish border. The preferred path was identified based on a set of spatial criteria. With the aid of a group of decision-makers and experts in railway design and transportation planning, a questionnaire was created to highlight the relative relevance of the location criteria. This was carried out using pairwise comparisons after creating a hierarchical framework to assess the criteria of the criteria. The outcomes of the relative importance criterion showed that the highest relative importance was for water sources, which amounted to 29.7%, while the environmental impact criterion had the lowest value of 6.9%. An equivalent cost surface was formulated, and the route path was determined using various maps and a unique framework for data analysis on the adjusted surface. The prepared route path reduces the worthy cost surface by up to 63% compared with the other routes suggested by the General Company for Iraqi Railways. Earthworks, intersections with irrigation canals and valleys, and path length were also considered to determine the best route. The study showed that the path prepared using the analytical hierarchy process and GIS techniques was the preferred path.

  • Open Access

    Pedestrian Midblock Crossing Safety Development Modeling in Dohuk City Road Network

    by Ayman Abdulhadi Abdulmawjoud, Abdulkhalik A.M. Al-Taei

    : Pedestrians are vulnerable users walking on foot, having no or little protection-usually provided by police officers-when trying to cross from a midblock section in urban areas. A lot of conflicts and sometimes real pedestrian crashes probably took place in some locations in Dohuk City midblock crosswalks. For this purpose, and to have a comprehensive idea about the safety situation in this city, and what are the main safety countermeasures needed at some hazardous pedestrian crossing locations, this study was proposed. Data were collected from twenty crosswalk locations in central business district (CBD), and suburban areas related to pedestrian movement using two video camera photography to collect data. Data were compiled and presented to measure pedestrian speeds, space, unit flow, crossroad width, etc., meanwhile, vehicular traffic data related to crossing volume, speed…etc. were presented too. Safety and security data related to conflicts of pedestrians with cross vehicles and some actual crash data were obtained from the qualified offices controlling traffic in the city. The Exponential Model was found as best-fitting conflict rates and pedestrian spaces with high R2 in both urban and suburban areas. Meanwhile, the Quadratic Model was found to best fitting conflict rates and pedestrian speeds with R2 values of 0.764, and 0.818 in both urban and suburban areas respectively. Conflict rates are found as best correlating the real crash frequency with a high R2 value of 0.924 in suburban areas. Conflict rates in both CBD and suburban areas are going to be decreased as the pedestrian provided space, speed, crossed road width, and 85th percentile vehicular speed, but increased with the amount of waiting time experienced by pedestrians at crosswalk edge with R2 values of 0.84, and 0.90 for CBD and suburban crosswalks respectively.

  • Traffic Performance Measures on Two-Way Two-Lane Rural Highways

    by Ayman A. Abdulmawjoud

    The most appropriate service measure for a two-lane highway is the combination of average travel speed (ATS) and percent time spent following (PTSF). The local driver behavior and traffic operation characteristics in different countries affect the operational analysis results. The objective of this study is to evaluate the applicability of the HCM procedures on two-lane highways in Iraq. Ten highway segments in northern Iraq were selected, and more than 28,000 vehicles were observed to record traffic characteristics. The results show that for low flow rates, the HCM-2000 procedures tend to overestimate the ATS with an amount of 0.0085VP, while for moderate-to-high flow rates, the HCM procedures tend to underestimate the ATS with an amount of 0.0025VP for the highways considered. Moreover, the HCM procedures tend to overestimate PTSF; as well, ATS decreases as PTSF, density, and follower density increase for the highways under study. Equations are developed for the evaluation of traffic performance on two-lane highways in Iraq.


  • Open Access

    Using the Analytic Hierarchical Process in Determining the Relative Importance of some Spatial Criteria to Locate Railway Track

    by Aseel Ibrahim Matti, Ayman A. Abdulmawjoud

    In this study, the weights of a number of criteria that affect the selection of the railway track between Mosul and Fishkhabur on the Iraqi- Syrian- Turkish border are determined. These criteria include ground slope, water resources, irrigation canals, infrastructure services routes, land use, environmental impact, and soil bearing strength. A questionnaire is conducted for a group of decision makers, specialists and planners. The Analytic Hierarchical Process (AHP) technology developed by Saaty is implemented by using pairwise comparison among the criteria. This method is chosen due to its ease, accuracy and the existence of a specialized computer program to perform the mathematical calculations, incorporating weights for all forms, and extracting the final weight for choosing the path. The study shows that the water resources criterion of (29.7%) at a consensus rate of (57%) gets the highest relative importance followed by the ground slope criterion (21.3%) at a consensus of (49%). The environmental impact criterion of (6.9%) at a consensus rate of (53%) gets the lowest value of the relative importance.

  • Open Access

    Using the Analytic Hierarchical Process in Determining the Relative Importance of some Spatial Criteria to Locate Railway Track

    by Aseel Ibrahim Matti, Ayman A. Abdulmawjoud

    In this study, the weights of a number of criteria that affect the selection of the railway track between Mosul and Fishkhabur on the Iraqi- Syrian- Turkish border are determined. These criteria include ground slope, water resources, irrigation canals, infrastructure services routes, land use, environmental impact, and soil bearing strength. A questionnaire is conducted for a group of decision makers, specialists and planners. The Analytic Hierarchical Process (AHP) technology developed by Saaty is implemented by using pairwise comparison among the criteria. This method is chosen due to its ease, accuracy and the existence of a specialized computer program to perform the mathematical calculations, incorporating weights for all forms, and extracting the final weight for choosing the path. The study shows that the water resources criterion of (29.7%) at a consensus rate of (57%) gets the highest relative importance followed by the ground slope criterion (21.3%) at a consensus of (49%). The environmental impact criterion of (6.9%) at a consensus rate of (53%) gets the lowest value of the relative importance.

  • Open Access

    Hybrid Steel Fiber of Rigid Pavements: A 3D Finite Element and Parametric Analysis

    by Bakhtiyar Q. Khawaja Al Harki, Mohammed S. Al Jawahery, Ayman A. Abdulmawjoud

    Rigid pavements have high compressive strength and low flexural strength due to the brittleness of concrete. This leads to the formation of cracks easily under the applied loads of vehicles; therefore, the design of concrete pavements usually leads to an increase in the high thicknesses. Hybrid steel fibers are used in concrete to increase flexural strength and minimize crack formation. Using concrete with steel fibers in pavements reduces the required concrete thickness. In recent decades, the application of the finite element method to predict the behavior of rigid pavements has increased. This study investigates the influence of hybrid steel fiber on the behavior of rigid pavements; a finite element modeling approach is used to simulate the case study. Several parameters are entered and investigated in this study, including the proportion mix of hybrid fiber concrete (HFC), which contains 0.2% macro synthetic fibers and 0.68, 0.8, and 0.96% of steel fibers, compressive strengths of 25, 35, and 45 MPa, slab thicknesses of 150, 200, and 250 mm, and the load of the tandem axle at the edge of mid slab on the Winkler foundation. The ATENA software package is used to perform a nonlinear finite element analysis. Thirty-six rigid specimen pavements with dimensions of 3600 × 3600 mm were modeled in this investigation. The results showed that the addition ratio (0.68 + 0.2)% of hybrid fibers is more effective in improving the load bearing capacity with a slab thickness of 150 mm and 25 MPa compressive strength.


  • Open Access

    Traffic flow parameters development modelling at traffic calming measures located on arterial roads

    by Ayman A. Abdulmawjoud, Mohammed G. Jamel, Abdulkhalik A. Al-Taei


  • Open Access

    HEADWAY MODELING IN NORTHERN IRAQI TWO-LANE HIGHWAYS

    by Ayman A. AbdulMawjoud

    Headway is the time interval between passages of successive vehicles past a point on the highway. More than 8000 car headways were observed in 10 level and rolling terrain two-lane highways in northern Iraq to find the critical headway and headway distribution and modeling for these highways. It is found that the critical headways are ranges between 2.5 to 4.0 seconds with a suitable critical headway of 3.2 second. The best headway model consists of composite model, for free vehicles it is a shifted negative exponential distribution, while for constrained vehicles it is a lognormal distribution.