Vasiola Zhaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vasiola Zhaka has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Andrzej Cwirzen
Building Materials Group, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 97187 Luleå, Sweden
6 shared publications - Jonny Nilimaa
Department of Civil, Environmental and Natural Resources Engineering, Lulea University of Technology, 97187 Lulea, Sweden
5 shared publications - Kaj Riska
Formerly TOTAL SA, Paris, France
3 shared publications - Robert Bridges
Totalenergies SE, Paris, France
3 shared publications - Björn Samuelsson2 shared publications
- Aniket Patil
SINTEF Narvik, Norway
1 shared publication
Latest Publications
- Open Access
- 9 April 2026
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 235
Large-scale hydrogen refuelling infrastructure in ports
- 9 April 2026
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 235
Open AccessLarge-scale hydrogen refuelling infrastructure in ports
- Open Access
- 20 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 220
Thermodynamic simulations for high-capacity hydrogen refueling stations for marine vessels
- 20 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 220
Open AccessThermodynamic simulations for high-capacity hydrogen refueling stations for marine vessels
- Open Access
- 14 November 2024
- Published by Elsevier in Energy Reports
- Vol. 12, 5249-5267
Hydrogen as fuel in the maritime sector: From production to propulsion
- 14 November 2024
- Published by Elsevier in Energy Reports
- Vol. 12, 5249-5267
Open AccessHydrogen as fuel in the maritime sector: From production to propulsion
- Open Access
- 15 January 2024
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 70, 1-39
Snow effects on brash ice and level ice growth
Brash ice formation and accumulation occur at a faster rate in ship channels, harbours and turning areas compared to the surrounding level ice. Accurate prediction of brash ice thickness plays an important role in addressing operational challenges and optimisation of ice management strategies. This study enhances existing brash ice growth models by considering the effects of snow and accounting for brash ice expulsion towards the sides of ship channels at each passage. To validate the influence of these critical factors on brash ice thickness, three distinct ship channels located in the Bay of Bothnia, Luleå, Sweden, were investigated. For two test channels formed for study purposes, the slower growth rate of brash ice caused by snow insulation was more prominent than the brash ice growth acceleration caused by the snow–slush–snow ice transformation. In the third channel characterised by frequent navigation, the transformation of slush into snow ice played a more substantial role than snow insulation. In both test channels, the brash ice growth model performed optimally, assuming a 10% expulsion of brash ice sideways at each vessel passage. In the third, wider and more frequently navigated channel, a 1.2% brash ice expelling coefficient predicted well the measured brash ice thicknesses.
- 15 January 2024
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 70, 1-39
Open AccessSnow effects on brash ice and level ice growth
Brash ice formation and accumulation occur at a faster rate in ship channels, harbours and turning areas compared to the surrounding level ice. Accurate prediction of brash ice thickness plays an important role in addressing operational challenges and optimisation of ice management strategies. This study enhances existing brash ice growth models by considering the effects of snow and accounting for brash ice expulsion towards the sides of ship channels at each passage. To validate the influence of these critical factors on brash ice thickness, three distinct ship channels located in the Bay of Bothnia, Luleå, Sweden, were investigated. For two test channels formed for study purposes, the slower growth rate of brash ice caused by snow insulation was more prominent than the brash ice growth acceleration caused by the snow–slush–snow ice transformation. In the third channel characterised by frequent navigation, the transformation of slush into snow ice played a more substantial role than snow insulation. In both test channels, the brash ice growth model performed optimally, assuming a 10% expulsion of brash ice sideways at each vessel passage. In the third, wider and more frequently navigated channel, a 1.2% brash ice expelling coefficient predicted well the measured brash ice thicknesses.
- Open Access
Formwork Engineering for Sustainable Concrete Construction
This study provides a comprehensive review of the engineering challenges of formwork in concrete construction. The paper investigates different formwork systems, their design based on form pressure, and the difficulties of form stripping. Alternative binders are gaining more and more interest by opening new opportunities for sustainable concrete materials and their impact on form pressure and concrete setting is also investigated in this paper. The discussion involves several engineering challenges such as sustainability, safety, and economy, while it also explores previous case studies, and discusses future trends in formwork design. The findings pinpoint that choosing an appropriate formwork system depends significantly on project-specific constraints and that the development of innovative materials and technologies presents significant benefits but also new challenges, including the need for training and regulation. Current trends in formwork design and use show promising possibilities for the integration of digital technologies and the development of sustainable and ‘smart’ formwork systems. Continued research within the field has the possibility to explore new formwork materials and technologies, which will contribute to the implementation of more effective and sustainable practices in concrete construction.
Open AccessFormwork Engineering for Sustainable Concrete Construction
This study provides a comprehensive review of the engineering challenges of formwork in concrete construction. The paper investigates different formwork systems, their design based on form pressure, and the difficulties of form stripping. Alternative binders are gaining more and more interest by opening new opportunities for sustainable concrete materials and their impact on form pressure and concrete setting is also investigated in this paper. The discussion involves several engineering challenges such as sustainability, safety, and economy, while it also explores previous case studies, and discusses future trends in formwork design. The findings pinpoint that choosing an appropriate formwork system depends significantly on project-specific constraints and that the development of innovative materials and technologies presents significant benefits but also new challenges, including the need for training and regulation. Current trends in formwork design and use show promising possibilities for the integration of digital technologies and the development of sustainable and ‘smart’ formwork systems. Continued research within the field has the possibility to explore new formwork materials and technologies, which will contribute to the implementation of more effective and sustainable practices in concrete construction.
- Open Access
- 1 July 2023
- Published by Cambridge University Press (CUP) in Annals of Glaciology
- Vol. 64 (91) , 77-94
Initial snow-ice formation on a laboratory scale
Snow ice (SI) forms from freezing wet snow, known as slush, and contributes to the thickness of level and brash ice. However, the mechanism of snow-slush-snow ice transformation has not been extensively investigated to date, despite the difference in the freezing rate of slush in comparison with water is important for estimating the ice thickness. In this study, we examined the growth of initial congelation ice (CI) and snow ice (SI) in a fresh water tank exposed to outdoor weather conditions in Luleå, northern Sweden. The tank of size 1.8 × 0.65 × 1.2 m in length, width and height was divided into two compartments to facilitate the simultaneous growth of CI and SI. A total of 12 experiments were conducted in the years 2021 and 2022. The transformation from slush to snow ice was achieved by submerging various amounts of snow in the compartments. It was observed that approximately 35% of the initial snow transformed into SI. Snow ice grew 4 mm°C−0.5 d−0.5 faster than congelation ice. The CI growth under SI was 1 mm°C−0.5 d−0.5 slower than the CI growth under CI. This study provides valuable insights for modelling snow-slush-snow ice transformation and designing future laboratory-scale experiments.
- 1 July 2023
- Published by Cambridge University Press (CUP) in Annals of Glaciology
- Vol. 64 (91) , 77-94
Open AccessInitial snow-ice formation on a laboratory scale
Snow ice (SI) forms from freezing wet snow, known as slush, and contributes to the thickness of level and brash ice. However, the mechanism of snow-slush-snow ice transformation has not been extensively investigated to date, despite the difference in the freezing rate of slush in comparison with water is important for estimating the ice thickness. In this study, we examined the growth of initial congelation ice (CI) and snow ice (SI) in a fresh water tank exposed to outdoor weather conditions in Luleå, northern Sweden. The tank of size 1.8 × 0.65 × 1.2 m in length, width and height was divided into two compartments to facilitate the simultaneous growth of CI and SI. A total of 12 experiments were conducted in the years 2021 and 2022. The transformation from slush to snow ice was achieved by submerging various amounts of snow in the compartments. It was observed that approximately 35% of the initial snow transformed into SI. Snow ice grew 4 mm°C−0.5 d−0.5 faster than congelation ice. The CI growth under SI was 1 mm°C−0.5 d−0.5 slower than the CI growth under CI. This study provides valuable insights for modelling snow-slush-snow ice transformation and designing future laboratory-scale experiments.
- Open Access
Observations of Snow–Slush–Snow Ice Transformation and Properties of Brash Ice in Ship Channels
The thickness and properties of brash ice are usually compared with the properties of the surrounding level ice. The differences between these ice types are important to understand since the consolidated brash ice layer is typically assumed to have the same properties as level ice. Therefore, significant effort in the measurement campaign during the winters of 2020–2021, 2021–2022, and 2023 was made to develop a better understanding of the full-scale brash ice channel development. The channels were located near the shore in the Bay of Bothnia, Luleå, Sweden. The main parameters investigated were the snow, slush, and total ice thicknesses, including ice formed from freezing water and from freezing slush as well as the ice microstructure and strength. To our knowledge, this is the first paper to report the influence of snow in brash ice channels. It was observed that a significant amount of snow covered the brash ice channels between the ship passages. After each ship passage, the snow was submerged and formed slush-filled voids, which thereafter transformed into snow ice (SI) clusters frozen together with columnar ice. The SI content in the brash ice and side ridges was estimated from image analyses. The analyses showed that the snow ice content was 73% in level ice in the vicinity of the ship channel, 58% in the side ridges of the channel, and 21% in the middle of the test channel, whereas in the main channel, the SI contents were 54%, 43%, and 41% in each location, respectively.
Open AccessObservations of Snow–Slush–Snow Ice Transformation and Properties of Brash Ice in Ship Channels
The thickness and properties of brash ice are usually compared with the properties of the surrounding level ice. The differences between these ice types are important to understand since the consolidated brash ice layer is typically assumed to have the same properties as level ice. Therefore, significant effort in the measurement campaign during the winters of 2020–2021, 2021–2022, and 2023 was made to develop a better understanding of the full-scale brash ice channel development. The channels were located near the shore in the Bay of Bothnia, Luleå, Sweden. The main parameters investigated were the snow, slush, and total ice thicknesses, including ice formed from freezing water and from freezing slush as well as the ice microstructure and strength. To our knowledge, this is the first paper to report the influence of snow in brash ice channels. It was observed that a significant amount of snow covered the brash ice channels between the ship passages. After each ship passage, the snow was submerged and formed slush-filled voids, which thereafter transformed into snow ice (SI) clusters frozen together with columnar ice. The SI content in the brash ice and side ridges was estimated from image analyses. The analyses showed that the snow ice content was 73% in level ice in the vicinity of the ship channel, 58% in the side ridges of the channel, and 21% in the middle of the test channel, whereas in the main channel, the SI contents were 54%, 43%, and 41% in each location, respectively.
- Open Access
An Overview of Smart Materials and Technologies for Concrete Construction in Cold Weather
Cold weather conditions pose significant challenges to the performance and durability of concrete materials, construction processes, and structures. This paper aims to provide a comprehensive overview of the material-related challenges in cold weather concrete construction, including slow setting, reduced curing rate, and slower strength development, as well as frost damage, early freezing, and freeze–thaw actions. Various innovative materials and technologies may be implemented to address these challenges, such as optimizing the concrete mix proportions, chemical admixtures, supplementary cementitious materials, and advanced construction techniques. The paper also examines the impact of weather-related challenges for personnel, equipment, and machinery in cold environments and highlights the importance of effective planning, communication, and management strategies. Results indicate that the successful implementation of appropriate strategies can mitigate the challenges, reduce construction time, and enhance the performance, durability, and sustainability of concrete structures in cold and freezing temperatures. The paper emphasizes the importance of staying updated about the latest advancements and best practices in the field. Future trends include the development of smart and functional concrete materials, advanced manufacturing and construction techniques, integrated design, and optimization of tools, all with a strong focus on sustainability and resilience.
Open AccessAn Overview of Smart Materials and Technologies for Concrete Construction in Cold Weather
Cold weather conditions pose significant challenges to the performance and durability of concrete materials, construction processes, and structures. This paper aims to provide a comprehensive overview of the material-related challenges in cold weather concrete construction, including slow setting, reduced curing rate, and slower strength development, as well as frost damage, early freezing, and freeze–thaw actions. Various innovative materials and technologies may be implemented to address these challenges, such as optimizing the concrete mix proportions, chemical admixtures, supplementary cementitious materials, and advanced construction techniques. The paper also examines the impact of weather-related challenges for personnel, equipment, and machinery in cold environments and highlights the importance of effective planning, communication, and management strategies. Results indicate that the successful implementation of appropriate strategies can mitigate the challenges, reduce construction time, and enhance the performance, durability, and sustainability of concrete structures in cold and freezing temperatures. The paper emphasizes the importance of staying updated about the latest advancements and best practices in the field. Future trends include the development of smart and functional concrete materials, advanced manufacturing and construction techniques, integrated design, and optimization of tools, all with a strong focus on sustainability and resilience.
- Open Access
- 23 April 2023
- Published by MDPI AG in Construction Materials
- Vol. 3 (2) , 180-201
Material and Environmental Aspects of Concrete Flooring in Cold Climate
Dehydration of concrete floor slabs is a critical step to ensure that the flooring material adheres properly and that there is no moisture-related damage to the floor after installation. Dehydration in a cold climate is often a slow process, which can have a big impact on the overall duration of the construction project, and corresponding measures are often taken to accelerate the drying process, especially in constructions exposed to a cold climate. One common method, typically used to accelerate dehydration in cold weather, is to introduce internal heating cables into the slab. This method reduces the dehydration time, but may not be the best solution from a sustainability perspective. This paper presents a concept study of concrete flooring in a cold climate from a cradle to practical completion perspective. The study focused on the environmental and material aspects of the dehydration of concrete floors in a cast-in-place house. This paper showed that concretes with high water-cement ratios, which are typically preferred due to their low CO2 emissions, may require measures for accelerated dehydration, which ultimately results in a higher environmental impact. The importance of environmental studies is also highlighted to fully understand the environmental aspects of construction.
- 23 April 2023
- Published by MDPI AG in Construction Materials
- Vol. 3 (2) , 180-201
Open AccessMaterial and Environmental Aspects of Concrete Flooring in Cold Climate
Dehydration of concrete floor slabs is a critical step to ensure that the flooring material adheres properly and that there is no moisture-related damage to the floor after installation. Dehydration in a cold climate is often a slow process, which can have a big impact on the overall duration of the construction project, and corresponding measures are often taken to accelerate the drying process, especially in constructions exposed to a cold climate. One common method, typically used to accelerate dehydration in cold weather, is to introduce internal heating cables into the slab. This method reduces the dehydration time, but may not be the best solution from a sustainability perspective. This paper presents a concept study of concrete flooring in a cold climate from a cradle to practical completion perspective. The study focused on the environmental and material aspects of the dehydration of concrete floors in a cast-in-place house. This paper showed that concretes with high water-cement ratios, which are typically preferred due to their low CO2 emissions, may require measures for accelerated dehydration, which ultimately results in a higher environmental impact. The importance of environmental studies is also highlighted to fully understand the environmental aspects of construction.
- Open Access
- 2 March 2022
- Published by Elsevier in Ocean Engineering
- Vol. 249, 110935
Large-scale shear test of brash ice
- 2 March 2022
- Published by Elsevier in Ocean Engineering
- Vol. 249, 110935
Open AccessLarge-scale shear test of brash ice