Анна Владимировна Родькина
Research Subjects
Анна Владимировна Родькина has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Vadim Kramar
Robotics and Intelligent Control Systems Laboratory, Sevastopol State University, 299053 Sevastopol, Russia
11 shared publications - Ольга Александровна Иванова
Севастопольский государственный университет, г. Севастополь, Россия
11 shared publications Veronika Dushko
5 shared publications- Вероника Ростиславовна Душко
Севастопольский государственный университет, г. Севастополь, Россия
5 shared publications Olga Ivanova
3 shared publications- Anton Zinchenko
Department of Cyber-Physical Systems, St. Petersburg State Marine Technical University, Leninsky Prospect, 101, 198262 St. Petersburg, Russia
2 shared publications
Latest Publications
- Open Access
- 19 December 2024
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 81,p. 41-55
Information System Concept Implementing Single Design and Production Space Between Vessel Life Cycle Participants
The disadvantages in the enterprises interaction and the transition of documentation between the vessel (offshore object) life cycle stages within existing systems in electronic form has been analyzed. Based on this the authors developed the concept of an unified information system implementation algorithm in a general form. The investigation object is the data movement process, which includes: design documentation at the design stage, working design documentation at the development stage, technological processes at the stage of manufacturing components and building marine equipment samples, as well as operational documentation. The investigation subject is a system being developed that provides all the necessary functions for the data movement during the participants (enterprises) interaction at all life cycle stages. The investigation purpose is to develop a new unified information system with the exception of existing disadvantages in the implementation and use of analogues at Russian enterprises. This system will implement a unified design and production space between life cycle participants, using organizational and economic mechanisms, which will significantly reduce the project implementation time, carry out open monitoring of everything process for the designer, the construction plant and the customer himself, thanks to the integration of data from all product life cycle stages on a unified information platform. As a result of the research, it was revealed that the creation of such a system will eliminate the proliferation of data records copies, as is the case with a “paper” management organization. Simultaneous access of many users to the same data will simplify maintaining the data relevance. Unification of data collection and storage formats will allow the formation data suitable for automated processing using a specific algorithm. The presence of a unified database will reduce the time of information analysis. Automation of routine operations will reduce the labor costs of performers. Ways are proposed for the formation of organizational and economic mechanisms that contribute to the selected methods implementation effectiveness in the implementation of design and production activities.
- 19 December 2024
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 81,p. 41-55
Open AccessInformation System Concept Implementing Single Design and Production Space Between Vessel Life Cycle Participants
The disadvantages in the enterprises interaction and the transition of documentation between the vessel (offshore object) life cycle stages within existing systems in electronic form has been analyzed. Based on this the authors developed the concept of an unified information system implementation algorithm in a general form. The investigation object is the data movement process, which includes: design documentation at the design stage, working design documentation at the development stage, technological processes at the stage of manufacturing components and building marine equipment samples, as well as operational documentation. The investigation subject is a system being developed that provides all the necessary functions for the data movement during the participants (enterprises) interaction at all life cycle stages. The investigation purpose is to develop a new unified information system with the exception of existing disadvantages in the implementation and use of analogues at Russian enterprises. This system will implement a unified design and production space between life cycle participants, using organizational and economic mechanisms, which will significantly reduce the project implementation time, carry out open monitoring of everything process for the designer, the construction plant and the customer himself, thanks to the integration of data from all product life cycle stages on a unified information platform. As a result of the research, it was revealed that the creation of such a system will eliminate the proliferation of data records copies, as is the case with a “paper” management organization. Simultaneous access of many users to the same data will simplify maintaining the data relevance. Unification of data collection and storage formats will allow the formation data suitable for automated processing using a specific algorithm. The presence of a unified database will reduce the time of information analysis. Automation of routine operations will reduce the labor costs of performers. Ways are proposed for the formation of organizational and economic mechanisms that contribute to the selected methods implementation effectiveness in the implementation of design and production activities.
- Open Access
- 29 February 2024
- Published by Astrakhan State Technical University in Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies
- Vol. 2024 (1) , 38-44
Analysis by the information tools hierarchy method in providing cost calculations in civil shipbuilding
- 29 February 2024
- Published by Astrakhan State Technical University in Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies
- Vol. 2024 (1) , 38-44
Open AccessAnalysis by the information tools hierarchy method in providing cost calculations in civil shipbuilding
- Open Access
- 18 September 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 76,p. 61-74
Drilling rig type selection for exploratory drilling in the Arctic conditions using analytic hierarchy method
Одной из базовых инфраструктур в экономике России, формирующих основной бюджет страны, является топливно-энергетический комплекс. Добыча нефтегазовой промышленности в акваториях Северного Ледовитого океана на континентальном шельфе России имеет развитие по некоторым тенденциям - для разведочного бурения в арктических условиях могут использоваться различные типы буровых установок, имеющих отличные друг от друга параметры. Их краткое описание, а также обоснование выбора наиболее эффективной концепции буровой установки для разведочного бурения в арктических условиях с помощью метода анализа иерархий приводится в данной статье. Для получения данных результатов был произведен расчет, который заключался в определении веса критериев выбора. Было произведено обоснованное на полученных результатах сравнение имеющихся альтернатив с последующим выбором наиболее эффективного для заданных условий варианта. Также была представлена новая концепция комбинированной погружной буровой установки для разведочного бурения в арктических условиях.
- 18 September 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 76,p. 61-74
Open AccessDrilling rig type selection for exploratory drilling in the Arctic conditions using analytic hierarchy method
Одной из базовых инфраструктур в экономике России, формирующих основной бюджет страны, является топливно-энергетический комплекс. Добыча нефтегазовой промышленности в акваториях Северного Ледовитого океана на континентальном шельфе России имеет развитие по некоторым тенденциям - для разведочного бурения в арктических условиях могут использоваться различные типы буровых установок, имеющих отличные друг от друга параметры. Их краткое описание, а также обоснование выбора наиболее эффективной концепции буровой установки для разведочного бурения в арктических условиях с помощью метода анализа иерархий приводится в данной статье. Для получения данных результатов был произведен расчет, который заключался в определении веса критериев выбора. Было произведено обоснованное на полученных результатах сравнение имеющихся альтернатив с последующим выбором наиболее эффективного для заданных условий варианта. Также была представлена новая концепция комбинированной погружной буровой установки для разведочного бурения в арктических условиях.
- Open Access
- 19 June 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 75,p. 84-94
Microscopy research of the steel surface layer in the splash area of ships and ocean technical facilities
The authors of the article describe research of the surface steel layer for the conditions of continuous submergence into the seawater test solution and for the splash area of ships and ocean technical facilities. Results of microscopic examination indicated a substantial difference in the structure and composition of the surface layer depending on the experimental conditions. Further study of the obtained elemental composition and microscopy images will allow the development of the computer-aided data analysis procedure based on the computer vision system with the application of intellectual frameworks to predict shipbuilding steel potentials at various stages of exposure to seawater with the aim to enhance corrosion protection methods.
- 19 June 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 75,p. 84-94
Open AccessMicroscopy research of the steel surface layer in the splash area of ships and ocean technical facilities
The authors of the article describe research of the surface steel layer for the conditions of continuous submergence into the seawater test solution and for the splash area of ships and ocean technical facilities. Results of microscopic examination indicated a substantial difference in the structure and composition of the surface layer depending on the experimental conditions. Further study of the obtained elemental composition and microscopy images will allow the development of the computer-aided data analysis procedure based on the computer vision system with the application of intellectual frameworks to predict shipbuilding steel potentials at various stages of exposure to seawater with the aim to enhance corrosion protection methods.
- 25 May 2023
- Published by Marine Intellectual Technologies in MORSKIE INTELLEKTUAL`NYE TEHNOLOGII
- No. 2(60),p. 60-66
The experimental research dependence of the potential of shipbuilding steels on the conditions marine environment
- 25 May 2023
- Published by Marine Intellectual Technologies in MORSKIE INTELLEKTUAL`NYE TEHNOLOGII
- No. 2(60),p. 60-66
The experimental research dependence of the potential of shipbuilding steels on the conditions marine environment
- Open Access
- 14 March 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 74,p. 15-26
Aspects of Designing the Ice-Resistant Drilling Platform to be Operated in the Taz Bay of the Gulf of Ob
Авторами статьи определена перспективность Обско-Тазовской губы по наличию районов газодобычи. Рассмотрены подходы к определению оптимальной ледостойкой формы опорного основания платформы. Определены сценарии экстремальных ледовых воздействий на сооружения, эксплуатирующиеся в Обской губе. Дана оценка глобальных нагрузок, возникающих при взаимодействии платформ с ледовыми образованиями, непосредственно влияющая на выбор конструкции платформы и способ ее удержания на грунте. Выполнен расчет глобальных ледовых нагрузок по отечественным и зарубежным методикам. Выполнен анализ полученных глобальных ледовых нагрузок, определенных по нескольким методикам, представленным в основных нормативных документах, при различных сценариях взаимодействия платформы с ледовыми образованиями. Рассмотрены перспективы дальнейших исследований.
- 14 March 2023
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 74,p. 15-26
Open AccessAspects of Designing the Ice-Resistant Drilling Platform to be Operated in the Taz Bay of the Gulf of Ob
Авторами статьи определена перспективность Обско-Тазовской губы по наличию районов газодобычи. Рассмотрены подходы к определению оптимальной ледостойкой формы опорного основания платформы. Определены сценарии экстремальных ледовых воздействий на сооружения, эксплуатирующиеся в Обской губе. Дана оценка глобальных нагрузок, возникающих при взаимодействии платформ с ледовыми образованиями, непосредственно влияющая на выбор конструкции платформы и способ ее удержания на грунте. Выполнен расчет глобальных ледовых нагрузок по отечественным и зарубежным методикам. Выполнен анализ полученных глобальных ледовых нагрузок, определенных по нескольким методикам, представленным в основных нормативных документах, при различных сценариях взаимодействия платформы с ледовыми образованиями. Рассмотрены перспективы дальнейших исследований.
- Open Access
- 7 June 2022
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 71,p. 54-73
Methodology for risk assessment at the conceptual design stage of offshore structures during the offshore fields development
The article carried out a qualitative risk assessment taking into account the developed scale "Probability / frequency and using "The Classifier of consequences" for several options for the offshore fields development. "The Consequence Category Classifier" takes into account environmental, financial, life, health and time risk criteria affecting construction and operation. The risk analysis was carried out taking into account the existing regulatory documentation and based on the analysis of the causes of the occurrence of factors that determine the outcomes of accidents, taking into account all the features of the cases under consideration for the life cycle stages: Design work, Production and testing, Use (operation). The degree of agreement in the performance of the experts group work was made based on the calculation of the Kendall rank coefficient. Subcategories were determined simultaneously for all the considered field development facilities according to the results of the performed calculations in risk categories. a Risk register was compiled based on the developed scale "Probability/Frequency" and the developed "Classifier of Consequence Categories". The risk register included 72 risks. The “Risk Index” was determined as a result of calculations. As a result, based on the results of a qualitative risk assessment, a "Risk Matrix" was developed based on the methodology presented in the Register Rules. In this case, the Alarp model or the principle of reasonable sufficiency was used. This risk assessment allows you to determine: the degree of the risk importance, prioritize different categories of risks, choose the best option with the lowest "Risk Index".
- 7 June 2022
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 71,p. 54-73
Open AccessMethodology for risk assessment at the conceptual design stage of offshore structures during the offshore fields development
The article carried out a qualitative risk assessment taking into account the developed scale "Probability / frequency and using "The Classifier of consequences" for several options for the offshore fields development. "The Consequence Category Classifier" takes into account environmental, financial, life, health and time risk criteria affecting construction and operation. The risk analysis was carried out taking into account the existing regulatory documentation and based on the analysis of the causes of the occurrence of factors that determine the outcomes of accidents, taking into account all the features of the cases under consideration for the life cycle stages: Design work, Production and testing, Use (operation). The degree of agreement in the performance of the experts group work was made based on the calculation of the Kendall rank coefficient. Subcategories were determined simultaneously for all the considered field development facilities according to the results of the performed calculations in risk categories. a Risk register was compiled based on the developed scale "Probability/Frequency" and the developed "Classifier of Consequence Categories". The risk register included 72 risks. The “Risk Index” was determined as a result of calculations. As a result, based on the results of a qualitative risk assessment, a "Risk Matrix" was developed based on the methodology presented in the Register Rules. In this case, the Alarp model or the principle of reasonable sufficiency was used. This risk assessment allows you to determine: the degree of the risk importance, prioritize different categories of risks, choose the best option with the lowest "Risk Index".
- 1 April 2022
- Published by Faculty of Mechanical Engineering and Naval Architecture, Univ. of Zagreb in Brodogradnja
- Vol. 73 (2) , 59-77
SIMULATION AND SELECTION OF A PROTECTION TYPES IN THE DESIGN STAGE OF SHIPS AND OFFSHORE STRUCTURES
- 1 April 2022
- Published by Faculty of Mechanical Engineering and Naval Architecture, Univ. of Zagreb in Brodogradnja
- Vol. 73 (2) , 59-77
SIMULATION AND SELECTION OF A PROTECTION TYPES IN THE DESIGN STAGE OF SHIPS AND OFFSHORE STRUCTURES
- 3 March 2022
- Published by Marine Intellectual Technologies in MORSKIE INTELLEKTUAL`NYE TEHNOLOGII
- No. 1(55),p. 44-51
Ship design methods improving in the aspect of the technical requirement regulations for electrochemical protection
- 3 March 2022
- Published by Marine Intellectual Technologies in MORSKIE INTELLEKTUAL`NYE TEHNOLOGII
- No. 1(55),p. 44-51
Ship design methods improving in the aspect of the technical requirement regulations for electrochemical protection
- Open Access
- 28 October 2021
- Published by MDPI AG in Inventions
- Vol. 6 (4) , 74
Analysis Technology and Cathodic Protection for Hull Structures of Ships and Floating Facilities
Studies overviewed in the paper have yielded a number of new scientific results including the following: suggested is a technique for conducting experimental investigations of electrochemical characteristics of hull structures of ships and floating facilities on the juvenile surface under cathodic polarization in a test seawater solution with the use of the test facility developed for investigating electrochemical characteristics of hull structures of ships and floating facilities on the juvenile surface under cathodic polarization; obtained are the results of laboratory experiments on various shipbuilding steels without surface oxide films in test seawater solutions with a widely ranging salinity spectrum; developed is a neural network-based technique for predicting the protection potential of ships and floating facilities from local corrosion mechanical damages; developed is an algorithm for obtaining the protective potential for hull structures of ships and floating facilities; suggested is a method of protecting hull structures of ships and floating facilities by means of cathodic polarization from local corrosion mechanical damages at the potential of the uncharged surface on the juvenile surface of steel; revealed are beneficial effects of using cathodic polarization by impressed current at the potential of the uncharged surface on the juvenile surface of steel which allow the prolongation of the service life of hull structures of ships and floating facilities.
- 28 October 2021
- Published by MDPI AG in Inventions
- Vol. 6 (4) , 74
Open AccessAnalysis Technology and Cathodic Protection for Hull Structures of Ships and Floating Facilities
Studies overviewed in the paper have yielded a number of new scientific results including the following: suggested is a technique for conducting experimental investigations of electrochemical characteristics of hull structures of ships and floating facilities on the juvenile surface under cathodic polarization in a test seawater solution with the use of the test facility developed for investigating electrochemical characteristics of hull structures of ships and floating facilities on the juvenile surface under cathodic polarization; obtained are the results of laboratory experiments on various shipbuilding steels without surface oxide films in test seawater solutions with a widely ranging salinity spectrum; developed is a neural network-based technique for predicting the protection potential of ships and floating facilities from local corrosion mechanical damages; developed is an algorithm for obtaining the protective potential for hull structures of ships and floating facilities; suggested is a method of protecting hull structures of ships and floating facilities by means of cathodic polarization from local corrosion mechanical damages at the potential of the uncharged surface on the juvenile surface of steel; revealed are beneficial effects of using cathodic polarization by impressed current at the potential of the uncharged surface on the juvenile surface of steel which allow the prolongation of the service life of hull structures of ships and floating facilities.