Omer Yaffe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Omer Yaffe has a total of 182 co-authors. Here are the top co-authors by number of shared publications:
Roman Korobko
Department of Chemical and Biological Physics Weizmann Institute of Science 76100 Rehovot Israel
11 shared publications- Roman Korobko
Department of Chemical and Biological Physics, Weizmann Institute of Science, Rehovot 76100, Israel
9 shared publications - David A. Egger
Technical University of Munich
7 shared publications - Maor Asher
Department of Chemical and Biological Physics, Weizmann Institute of Science, Rehovot 76100, Israel
7 shared publications - Andrew M. Rappe
University of Pennsylvania
6 shared publications - Matan Menahem
Weizmann Institute of Science
6 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (42) , 12132-12138
Resolving Transient Electron–Phonon Coupling with Time-Resolved Spontaneous Raman Spectroscopy
Understanding the interaction of charge carriers with lattice vibrations in the quasi-equilibrium regime is crucial for semiconductor functionality. However, the structural signatures of these interactions are often too subtle for conventional ultrafast techniques to detect. We developed a time-resolved spontaneous Raman technique based on time-correlated single-photon counting to track the spectral response following photoexcitation, providing subwavenumber spectral resolution and a subnanosecond temporal resolution. Unlike traditional pump–probe schemes, our method utilizes a modulated continuous-wave probe to maintain high spectral resolution, enabling detection of low-frequency Raman shifts down to 10 cm–1. Applied to lightly boron-doped silicon, we resolve intra-valence band and inter-valence band electronic transitions. A coupled-mode analysis of transient phonon asymmetry, resulting from interference with the intervalence band transitions, reveals electron–phonon coupling parameters that directly relate to carrier recombination. By capturing these subtle dynamical shifts, we demonstrate that this platform offers a powerful probe for investigating electron–phonon interactions in long-lived excited states.
- 7 October 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (42) , 12132-12138
Open AccessResolving Transient Electron–Phonon Coupling with Time-Resolved Spontaneous Raman Spectroscopy
Understanding the interaction of charge carriers with lattice vibrations in the quasi-equilibrium regime is crucial for semiconductor functionality. However, the structural signatures of these interactions are often too subtle for conventional ultrafast techniques to detect. We developed a time-resolved spontaneous Raman technique based on time-correlated single-photon counting to track the spectral response following photoexcitation, providing subwavenumber spectral resolution and a subnanosecond temporal resolution. Unlike traditional pump–probe schemes, our method utilizes a modulated continuous-wave probe to maintain high spectral resolution, enabling detection of low-frequency Raman shifts down to 10 cm–1. Applied to lightly boron-doped silicon, we resolve intra-valence band and inter-valence band electronic transitions. A coupled-mode analysis of transient phonon asymmetry, resulting from interference with the intervalence band transitions, reveals electron–phonon coupling parameters that directly relate to carrier recombination. By capturing these subtle dynamical shifts, we demonstrate that this platform offers a powerful probe for investigating electron–phonon interactions in long-lived excited states.
- Open Access
- 10 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (28) , 30029-30036
Piezoelectricity from Dopant-Induced Structural Distortions in Molecular Crystals Revealed by Raman Spectroscopy
Crystal engineering offers a route to functional molecular solids through controlled noncovalent interactions. In centrosymmetric crystals, piezoelectricity can be induced by stereoselective doping, where chiral additives are incorporated in a biased orientation that lowers inversion symmetry and generates net polarization. However, the microscopic origin of this polarization, specifically whether it arises primarily from dipole mismatch between the dopant and the host molecule it replaces, or from dopant-induced lattice distortion, remains generally unclear. Here, we disentangle these two contributions by incorporating four chiral N-acetyl-L-amino acids into the centrosymmetric crystal N-acetyl-DL-valine and examining the resulting materials using piezoelectric measurements, density functional theory (DFT), and low-frequency Raman spectroscopy that reveals concentration-dependent symmetry-breaking phenomena not resolved by conventional X-ray diffraction. We show that in the systems studied, macroscopic piezoelectricity correlates directly with the magnitude and orientation of local lattice distortions, whereas dipole mismatch along the polar axis plays a secondary role. These results establish a direct structure-function relation in doped molecular crystals and provide predictive design principles for engineering electromechanical response in molecular crystals through biased local distortions.
- 10 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (28) , 30029-30036
Open AccessPiezoelectricity from Dopant-Induced Structural Distortions in Molecular Crystals Revealed by Raman Spectroscopy
Crystal engineering offers a route to functional molecular solids through controlled noncovalent interactions. In centrosymmetric crystals, piezoelectricity can be induced by stereoselective doping, where chiral additives are incorporated in a biased orientation that lowers inversion symmetry and generates net polarization. However, the microscopic origin of this polarization, specifically whether it arises primarily from dipole mismatch between the dopant and the host molecule it replaces, or from dopant-induced lattice distortion, remains generally unclear. Here, we disentangle these two contributions by incorporating four chiral N-acetyl-L-amino acids into the centrosymmetric crystal N-acetyl-DL-valine and examining the resulting materials using piezoelectric measurements, density functional theory (DFT), and low-frequency Raman spectroscopy that reveals concentration-dependent symmetry-breaking phenomena not resolved by conventional X-ray diffraction. We show that in the systems studied, macroscopic piezoelectricity correlates directly with the magnitude and orientation of local lattice distortions, whereas dipole mismatch along the polar axis plays a secondary role. These results establish a direct structure-function relation in doped molecular crystals and provide predictive design principles for engineering electromechanical response in molecular crystals through biased local distortions.
- Open Access
- 31 October 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (45) , 41699-41705
Hydrogen Bonds Induce Double-Well Spectroscopic Signatures in α-Glycine
Hydrogen bonds in molecular crystals are often modeled as double-well potentials, yet direct evidence linking this potential form to vibrational spectroscopic features remains elusive. In this study, we investigate α-glycine, a hydrogen-bonded crystal that exhibits pronounced Raman anomalies without undergoing a structural phase transition. Through temperature- and polarization-dependent Raman spectroscopy, supported by isotope substitution and first-principles calculations, we identify two peaks whose behavior violates conventional Raman selection rules. These peaks merge and narrow anomalously with temperature, an effect that cannot be explained by harmonic models or thermal broadening. Simulated spectra based on a weakly evolving asymmetric double-well potential reproduce this merging, indicating that both peaks originate from one double-well potential. Our results establish α-glycine as a model system directly linking microscopic hydrogen-bond potentials to vibrational spectroscopic features.
- 31 October 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (45) , 41699-41705
Open AccessHydrogen Bonds Induce Double-Well Spectroscopic Signatures in α-Glycine
Hydrogen bonds in molecular crystals are often modeled as double-well potentials, yet direct evidence linking this potential form to vibrational spectroscopic features remains elusive. In this study, we investigate α-glycine, a hydrogen-bonded crystal that exhibits pronounced Raman anomalies without undergoing a structural phase transition. Through temperature- and polarization-dependent Raman spectroscopy, supported by isotope substitution and first-principles calculations, we identify two peaks whose behavior violates conventional Raman selection rules. These peaks merge and narrow anomalously with temperature, an effect that cannot be explained by harmonic models or thermal broadening. Simulated spectra based on a weakly evolving asymmetric double-well potential reproduce this merging, indicating that both peaks originate from one double-well potential. Our results establish α-glycine as a model system directly linking microscopic hydrogen-bond potentials to vibrational spectroscopic features.
- Open Access
Ab initio theory of the non-resonant Raman effect in crystals at finite temperature in comparison to experiment: The examples of GaN and BaZrS3
We present an ab initio theory of the non-resonant Raman scattering process in crystals at finite temperature in direct comparison with experiments. The theory incorporates the scattering geometry and polarization dependence of the Raman process and the small but finite wave vectors of the phonons for correctly describing the scattering with longitudinal optical (LO) modes in optically anisotropic solids. We implement the theory for first-order Raman scattering and showcase the approach for wurtzite Gallium Nitride and the complex chalcogenide perovskite BaZrS3 in comparison to experiment. We subsequently discuss several common estimates for second-order Raman scattering in complex materials, and highlight similarities and differences to established theoretical approaches and simulation protocols both from phonon theory and molecular dynamics.
Open AccessAb initio theory of the non-resonant Raman effect in crystals at finite temperature in comparison to experiment: The examples of GaN and BaZrS3
We present an ab initio theory of the non-resonant Raman scattering process in crystals at finite temperature in direct comparison with experiments. The theory incorporates the scattering geometry and polarization dependence of the Raman process and the small but finite wave vectors of the phonons for correctly describing the scattering with longitudinal optical (LO) modes in optically anisotropic solids. We implement the theory for first-order Raman scattering and showcase the approach for wurtzite Gallium Nitride and the complex chalcogenide perovskite BaZrS3 in comparison to experiment. We subsequently discuss several common estimates for second-order Raman scattering in complex materials, and highlight similarities and differences to established theoretical approaches and simulation protocols both from phonon theory and molecular dynamics.
- Open Access
- 8 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (46) , 31911-31919
Toward On-Demand Polymorphic Transitions of Organic Crystals via Side Chain and Lattice Dynamics Engineering
Controlling polymorphism, namely, the occurrence of multiple crystal forms for a given compound, is still an open technological challenge that needs to be addressed for the reliable manufacturing of crystalline functional materials. Here, we devised a series of 13 organic crystals engineered to embody molecular fragments undergoing specific nanoscale motion anticipated to drive cooperative order-disorder phase transitions. By combining polarized optical microscopy coupled with a heating/cooling stage, differential scanning calorimetry, X-ray diffraction, low-frequency Raman spectroscopy, and calculations (density functional theory and molecular dynamics), we proved the occurrence of cooperative transitions in all the crystalline systems, and we demonstrated how both the molecular structure and lattice dynamics play crucial roles in these peculiar solid-to-solid transformations. These results introduce an efficient strategy to design polymorphic molecular crystalline materials endowed with specific molecular-scale lattice and macroscopic dynamics.
- 8 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (46) , 31911-31919
Open AccessToward On-Demand Polymorphic Transitions of Organic Crystals via Side Chain and Lattice Dynamics Engineering
Controlling polymorphism, namely, the occurrence of multiple crystal forms for a given compound, is still an open technological challenge that needs to be addressed for the reliable manufacturing of crystalline functional materials. Here, we devised a series of 13 organic crystals engineered to embody molecular fragments undergoing specific nanoscale motion anticipated to drive cooperative order-disorder phase transitions. By combining polarized optical microscopy coupled with a heating/cooling stage, differential scanning calorimetry, X-ray diffraction, low-frequency Raman spectroscopy, and calculations (density functional theory and molecular dynamics), we proved the occurrence of cooperative transitions in all the crystalline systems, and we demonstrated how both the molecular structure and lattice dynamics play crucial roles in these peculiar solid-to-solid transformations. These results introduce an efficient strategy to design polymorphic molecular crystalline materials endowed with specific molecular-scale lattice and macroscopic dynamics.
- 4 September 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (37) , 25656-25668
Local Structure in Crystalline, Glass and Melt States of a Hybrid Metal Halide Perovskite
The pursuit of structure–property relationships in crystalline metal halide perovskites (MHPs) has yielded an unprecedented combination of advantageous characteristics for wide-ranging optoelectronic applications. While crystalline MHP structures are readily accessible through diffraction-based structure refinements, providing a clear view of associated long-range ordering, the local structures in more recently discovered glassy MHP states remain unexplored. Herein, we utilize a combination of Raman spectroscopy, solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy, in situ X-ray diffraction (XRD) and pair distribution function (PDF) analysis to investigate the coordination environment in crystalline, glass and melt states of the 2D MHP [(S)-(−)-1-(1-naphthyl)ethylammonium]2PbBr4. While crystalline SNPB shows polarization-dependent Raman spectra, the glassy and melt states exhibit broad features and lack polarization dependence. Solid-state NMR reveals disordering at the organic–inorganic interface of the glass due to significant spatial disruption in the tethering ammonium groups and the corresponding dihedral bond angles connecting the naphthyl and ammonium groups, while still preserving substantial naphthyl group registry and remnants of the layering from the crystalline state (deduced from XRD analysis). Moreover, PDF analysis demonstrates the persistence of corner-sharing PbBr6 octahedra in the inorganic framework of the melt/glass phases, but with a loss of structural coherence over length scales exceeding approximately one octahedron due to disorder in the inter- and intraoctahedra bond angles/lengths. These findings deepen our understanding of diverse MHP structural motifs and how structural alterations within the MHP glass affect properties, offering potential for advancing next-generation phase change materials and devices.
- 4 September 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (37) , 25656-25668
Local Structure in Crystalline, Glass and Melt States of a Hybrid Metal Halide Perovskite
The pursuit of structure–property relationships in crystalline metal halide perovskites (MHPs) has yielded an unprecedented combination of advantageous characteristics for wide-ranging optoelectronic applications. While crystalline MHP structures are readily accessible through diffraction-based structure refinements, providing a clear view of associated long-range ordering, the local structures in more recently discovered glassy MHP states remain unexplored. Herein, we utilize a combination of Raman spectroscopy, solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy, in situ X-ray diffraction (XRD) and pair distribution function (PDF) analysis to investigate the coordination environment in crystalline, glass and melt states of the 2D MHP [(S)-(−)-1-(1-naphthyl)ethylammonium]2PbBr4. While crystalline SNPB shows polarization-dependent Raman spectra, the glassy and melt states exhibit broad features and lack polarization dependence. Solid-state NMR reveals disordering at the organic–inorganic interface of the glass due to significant spatial disruption in the tethering ammonium groups and the corresponding dihedral bond angles connecting the naphthyl and ammonium groups, while still preserving substantial naphthyl group registry and remnants of the layering from the crystalline state (deduced from XRD analysis). Moreover, PDF analysis demonstrates the persistence of corner-sharing PbBr6 octahedra in the inorganic framework of the melt/glass phases, but with a loss of structural coherence over length scales exceeding approximately one octahedron due to disorder in the inter- and intraoctahedra bond angles/lengths. These findings deepen our understanding of diverse MHP structural motifs and how structural alterations within the MHP glass affect properties, offering potential for advancing next-generation phase change materials and devices.
- 20 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 085402
Differing vibrational properties of halide and chalcogenide perovskite semiconductors and impact on optoelectronic performance
We report a comparative study of temperature-dependent photoluminescence and structural dynamics of two perovskite semiconductors, the chalcogenide and the halide . These materials have similar crystal structures and direct band gaps, but we find that they have quite distinct optoelectronic and vibrational properties. Both materials exhibit thermally activated nonradiative recombination, but the nonradiative recombination rate in is four orders of magnitude faster than in , for the crystals studied here. Raman spectroscopy reveals that the effects of phonon anharmonicity are far more pronounced in than in . Further, although both materials feature a large dielectric response due to low-energy polar optical phonons, the phonons in are substantially lower in energy than in . Our results suggest that electron-phonon coupling in is more effective at nonradiative recombination than in and that may also have a substantially higher concentration of nonradiative recombination centers than . The low defect concentration in may be related to the ease of lattice reconfiguration, typified by anharmonic bonding. It remains to be seen to what extent these differences are inherent to the chalcogenide and halide perovskites and to what extent they can be affected by materials processing.- 20 August 2024
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 8 (8) , 085402
Differing vibrational properties of halide and chalcogenide perovskite semiconductors and impact on optoelectronic performance
We report a comparative study of temperature-dependent photoluminescence and structural dynamics of two perovskite semiconductors, the chalcogenide and the halide . These materials have similar crystal structures and direct band gaps, but we find that they have quite distinct optoelectronic and vibrational properties. Both materials exhibit thermally activated nonradiative recombination, but the nonradiative recombination rate in is four orders of magnitude faster than in , for the crystals studied here. Raman spectroscopy reveals that the effects of phonon anharmonicity are far more pronounced in than in . Further, although both materials feature a large dielectric response due to low-energy polar optical phonons, the phonons in are substantially lower in energy than in . Our results suggest that electron-phonon coupling in is more effective at nonradiative recombination than in and that may also have a substantially higher concentration of nonradiative recombination centers than . The low defect concentration in may be related to the ease of lattice reconfiguration, typified by anharmonic bonding. It remains to be seen to what extent these differences are inherent to the chalcogenide and halide perovskites and to what extent they can be affected by materials processing.- Open Access
- 1 July 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (27) , 7020-7027
Is Ortho-Terphenyl a Rigid Glass Former?
Ortho-terphenyl (OTP) has long been used as a model system to study the glass transition due to its apparent simplicity and a widespread assumption that it is a rigid molecule. Here, we employ terahertz time-domain spectroscopy and low-frequency Raman spectroscopy to investigate the rigidity of OTP by direct observation of the low-frequency vibrational dynamics. These terahertz phonons involve complex large-amplitude atomic motions where intramolecular and intermolecular displacements are often mixed. Comparison of experimental results with density functional theory and ab initio molecular dynamics simulations shows that the assumption of rigidity neglects important implications for the glass transition and must be revisited. These results highlight the significance of terahertz modes on elasticity, which will be even more critical in more complex systems such as biomolecules.
- 1 July 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 15 (27) , 7020-7027
Open AccessIs Ortho-Terphenyl a Rigid Glass Former?
Ortho-terphenyl (OTP) has long been used as a model system to study the glass transition due to its apparent simplicity and a widespread assumption that it is a rigid molecule. Here, we employ terahertz time-domain spectroscopy and low-frequency Raman spectroscopy to investigate the rigidity of OTP by direct observation of the low-frequency vibrational dynamics. These terahertz phonons involve complex large-amplitude atomic motions where intramolecular and intermolecular displacements are often mixed. Comparison of experimental results with density functional theory and ab initio molecular dynamics simulations shows that the assumption of rigidity neglects important implications for the glass transition and must be revisited. These results highlight the significance of terahertz modes on elasticity, which will be even more critical in more complex systems such as biomolecules.
- Open Access
- 31 May 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (23) , 15701-15717
Noncollinear Electric Dipoles in a Polar Chiral Phase of CsSnBr3 Perovskite
Polar and chiral crystal symmetries confer a variety of potentially useful functionalities upon solids by coupling otherwise noninteracting mechanical, electronic, optical, and magnetic degrees of freedom. We describe two phases of the 3D perovskite, CsSnBr3, which emerge below 85 K due to the formation of Sn(II) lone pairs and their interaction with extant octahedral tilts. Phase II (77 K < T < 85 K, space group P21/m) exhibits ferroaxial order driven by a noncollinear pattern of lone pair-driven distortions within the plane normal to the unique octahedral tilt axis, preserving the inversion symmetry observed at higher temperatures. Phase I (T < 77 K, space group P21) additionally exhibits ferroelectric order due to distortions along the unique tilt axis, breaking both inversion and mirror symmetries. This polar and chiral phase exhibits second harmonic generation from the bulk and pronounced electrostriction and negative thermal expansion along the polar axis (Q22 ≈ 1.1 m4 C-2; αb = -7.8 × 10-5 K-1) through the onset of polarization. The structures of phases I and II were predicted by recursively following harmonic phonon instabilities to generate a tree of candidate structures and subsequently corroborated by synchrotron X-ray powder diffraction and polarized Raman and 81Br nuclear quadrupole resonance spectroscopies. Preliminary attempts to suppress unintentional hole doping to allow for ferroelectric switching are described. Together, the polar symmetry, small band gap, large spin-orbit splitting of Sn 5p orbitals, and predicted strain sensitivity of the symmetry-breaking distortions suggest bulk samples and epitaxial films of CsSnBr3 or its neighboring solid solutions as candidates for bulk Rashba effects.
- 31 May 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (23) , 15701-15717
Open AccessNoncollinear Electric Dipoles in a Polar Chiral Phase of CsSnBr3 Perovskite
Polar and chiral crystal symmetries confer a variety of potentially useful functionalities upon solids by coupling otherwise noninteracting mechanical, electronic, optical, and magnetic degrees of freedom. We describe two phases of the 3D perovskite, CsSnBr3, which emerge below 85 K due to the formation of Sn(II) lone pairs and their interaction with extant octahedral tilts. Phase II (77 K < T < 85 K, space group P21/m) exhibits ferroaxial order driven by a noncollinear pattern of lone pair-driven distortions within the plane normal to the unique octahedral tilt axis, preserving the inversion symmetry observed at higher temperatures. Phase I (T < 77 K, space group P21) additionally exhibits ferroelectric order due to distortions along the unique tilt axis, breaking both inversion and mirror symmetries. This polar and chiral phase exhibits second harmonic generation from the bulk and pronounced electrostriction and negative thermal expansion along the polar axis (Q22 ≈ 1.1 m4 C-2; αb = -7.8 × 10-5 K-1) through the onset of polarization. The structures of phases I and II were predicted by recursively following harmonic phonon instabilities to generate a tree of candidate structures and subsequently corroborated by synchrotron X-ray powder diffraction and polarized Raman and 81Br nuclear quadrupole resonance spectroscopies. Preliminary attempts to suppress unintentional hole doping to allow for ferroelectric switching are described. Together, the polar symmetry, small band gap, large spin-orbit splitting of Sn 5p orbitals, and predicted strain sensitivity of the symmetry-breaking distortions suggest bulk samples and epitaxial films of CsSnBr3 or its neighboring solid solutions as candidates for bulk Rashba effects.
- Open Access
Vibrational properties differ between halide and chalcogenide perovskite semiconductors, and it matters for optoelectronic performance
We report a comparative study of temperature-dependent photoluminescence and structural dynamics of two perovskite semiconductors, the chalcogenide BaZrS$_3$ (BZS) and the halide CsPbBr$_3$ (CPB). These materials have similar crystal structures and direct band gaps, but we find that they have quite distinct optoelectronic and vibrational properties. Both materials exhibit thermally-activated non-radiative recombination, but the non-radiative recombination rate in BZS is between two and four orders of magnitude faster than in CPB. Raman spectroscopy reveals that the effects of phonon anharmonicity are far more pronounced in CPB than in BZS. Further, although both materials feature a large dielectric response due to low-energy polar optical phonons, the phonons in CPB are substantially lower in energy than in BZS. Our results suggest that electron-phonon coupling in BZS is more effective at non-radiative recombination than in CPB, and that BZS may also have a substantially higher concentration of non-radiative recombination centers than CPB. The low defect concentration in CPB may be related to the ease of lattice reconfiguration, typified by anharmonic bonding. It remains to be seen to what extent these differences are inherent to the chalcogenide and halide perovskites and to what extent they can be affected by materials processing; comparing BZS single-crystals and thin films provides reason for optimism.
Open AccessVibrational properties differ between halide and chalcogenide perovskite semiconductors, and it matters for optoelectronic performance
We report a comparative study of temperature-dependent photoluminescence and structural dynamics of two perovskite semiconductors, the chalcogenide BaZrS$_3$ (BZS) and the halide CsPbBr$_3$ (CPB). These materials have similar crystal structures and direct band gaps, but we find that they have quite distinct optoelectronic and vibrational properties. Both materials exhibit thermally-activated non-radiative recombination, but the non-radiative recombination rate in BZS is between two and four orders of magnitude faster than in CPB. Raman spectroscopy reveals that the effects of phonon anharmonicity are far more pronounced in CPB than in BZS. Further, although both materials feature a large dielectric response due to low-energy polar optical phonons, the phonons in CPB are substantially lower in energy than in BZS. Our results suggest that electron-phonon coupling in BZS is more effective at non-radiative recombination than in CPB, and that BZS may also have a substantially higher concentration of non-radiative recombination centers than CPB. The low defect concentration in CPB may be related to the ease of lattice reconfiguration, typified by anharmonic bonding. It remains to be seen to what extent these differences are inherent to the chalcogenide and halide perovskites and to what extent they can be affected by materials processing; comparing BZS single-crystals and thin films provides reason for optimism.