SYSheng Yang

Sheng Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sheng Yang has a total of 196 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Vertical Graphene/Violet-Phosphorus/Graphene Photodetectors for Wavelength-Programmed Optical Signal Encoding

    by Yuyuan Lai, Wenjuan Ma, Qingjing Zeng, Di Wang, Zhiming Lin, Yiqiang Xiao, Minghong Li, Fangdong Tang, Deyi Fu, Jinying Zhang, et al.

    As an emerging two-dimensional van der Waals material, violet phosphorus is particularly notable for its ambient stability, moderate bandgap, and strong light absorption, making it an excellent candidate for photodetection applications. However, conventional lateral-channel devices based on violet phosphorus typically suffer from severe carrier recombination losses over extended transport distances. Here, we demonstrate a high-performance vertical-channel photodetector based on a graphene/violet phosphorus/graphene (Gr/VP/Gr) van der Waals heterostructure. By shortening the carrier transport path, the vertical architecture enables efficient carrier collection and a high photoconductive gain. Under 532 nm illumination, the device achieves a responsivity of 1.7 × 104 A/W, a specific detectivity of 2.1 × 1013 Jones, and an external quantum efficiency of approximately 3.9 × 106%; its photoresponse spans 450–1050 nm. A transport-scaling analysis comparing vertical and lateral geometries indicates that the vertical structure reduces the carrier drift transit time to the picosecond scale, providing a quantitative rationale for the large effective gain. The device also exhibits wavelength-dependent transient dynamics, with a relatively fast response at 450 nm and a persistent response at 800 nm. These distinct temporal signatures enable a proof-of-concept demonstration of wavelength-programmed optical signal encoding. The outstanding optoelectronic performance of Gr/VP/Gr vertical heterostructures establishes them as an innovative and versatile platform for next-generation broadband photodetection and secure optical data transmission systems with enhanced quantum efficiency and spectral adaptability.

  • Crystalline Tellurium Nanowires Enabled by Rapid Hydrolysis of Lithium‐Intercalated Layered Metal Tellurides

    by Minjuan Li, Bin Han, Shun Feng, Chunli Wang, Yuxuan Zhang, Hui Yu, Songlin Liu, Dianhong Wang, Xiayu Zhang, Dongming Sun, et al.

    Tellurium (Te) nanowires attracted significant attention due to their unique magneto‐electric effect, thermoelectric properties and strong piezoelectricity. However, their controlled synthesis using traditional methods, including microwave irradiation, thermal evaporation and hydrothermal synthesis, suffers from serious trade‐offs between prolonged processing and limited crystal quality, preventing their widespread applications. Herein, we demonstrate an ultrafast, surfactant‐free strategy that enables scalable synthesis of solution‐processable crystalline Te nanowires within seconds. In this method, lithium‐intercalated MoTe 2 (denoted as Li x MoTe 2 ) , obtained from the initial synthetic step, undergoes a rapid hydrolysis reaction that completes on a sub‐second timescale at room temperature. Subsequently, the structural expansion induced by in‐situ H 2 formation breaks Mo─Te bonds, facilitating the uniform and rapid growth of Te nanowires with an average length of ∼824 nm and width of ∼21 nm. These solution‐processed crystalline Te nanowires exhibit a hole mobility of 8.7 cm 2 V −1 s −1 at room temperature and deliver fast photoresponse across the visible light regime (405–638 nm). They display remarkable weak‐light detection capability, as evidenced by a high specific detectivity of 1×10 8 Jones. This rapid synthetic approach paves the way for further applications of crystalline Te nanowires in electronic devices, energy conversion and optoelectronic devices.

  • C 60 ‐Mediated d‐π Conjugation Induces Electronic Reconstruction to Boost Charge Storage of Nb 2 C/Nb 2 O 5 Heterostructure Anode

    by Mingming Gao, Jundong Shao, Junke Li, Junyi Yang, Ying Huang, Sheng Yang, Faxing Wang, Shunqi Xu, Tanyuan Wang, Xing Lu, et al.

    Regulating orbital electronic structure to enhance the charge‐storage capability of anode materials is critical for developing high‐performance lithium‐ion hybrid capacitors (LIHCs). Herein, we report a novel interfacial engineering strategy that employs fullerene C 60 ‐mediated d‐π conjugation within a Nb 2 C/Nb 2 O 5 heterostructure (denoted as C 60 ‐Nb 2 C/Nb 2 O 5 ) to realize simultaneous electronic reconstruction and structural optimization. The introduced C 60 forms robust d‐π conjugation with the d ‐orbitals of Nb, acting as an electron acceptor to drive directional charge transfer across both the C 60 /Nb 2 C and Nb 2 C/Nb 2 O 5 interfaces. Combined theoretical and experimental analyses confirm that orbital engineering between Nb ( d xy / d yz ) and C 60 ( p ) facilitates electron backflow, improves intrinsic electronic conductivity, substantially lowers the Li + adsorption barrier, triggers an upward shift of the d ‐band center, and accelerates electron‐transfer kinetics. Consequently, the C 60 ‐Nb 2 C/Nb 2 O 5 anode delivers a remarkable reversible capacity of 658.8 mAh g− 1 at 0.1 A g− 1 and excellent rate capability. The assembled C 60 ‐Nb 2 C/Nb 2 O 5 //activated carbon LIHC achieves a high energy density of 199.5 Wh kg− 1 , ranking among the highest values reported for MXene‐based LIHCs. This work elucidates a molecular‐mediated interfacial electronic engineering mechanism for tailoring charge‐storage behavior, providing a rational design strategy for advanced electrochemical energy‐storage systems.

  • C 60 ‐Mediated d‐π Conjugation Induces Electronic Reconstruction to Boost Charge Storage of Nb 2 C/Nb 2 O 5 Heterostructure Anode

    by Mingming Gao, Jundong Shao, Junke Li, Junyi Yang, Ying Huang, Sheng Yang, Faxing Wang, Shunqi Xu, Tanyuan Wang, Xing Lu, et al.

    Regulating orbital electronic structure to enhance the charge‐storage capability of anode materials is critical for developing high‐performance lithium‐ion hybrid capacitors (LIHCs). Herein, we report a novel interfacial engineering strategy that employs fullerene C 60 ‐mediated d‐π conjugation within a Nb 2 C/Nb 2 O 5 heterostructure (denoted as C 60 ‐Nb 2 C/Nb 2 O 5 ) to realize simultaneous electronic reconstruction and structural optimization. The introduced C 60 forms robust d‐π conjugation with the d ‐orbitals of Nb, acting as an electron acceptor to drive directional charge transfer across both the C 60 /Nb 2 C and Nb 2 C/Nb 2 O 5 interfaces. Combined theoretical and experimental analyses confirm that orbital engineering between Nb ( d xy / d yz ) and C 60 ( p ) facilitates electron backflow, improves intrinsic electronic conductivity, substantially lowers the Li + adsorption barrier, triggers an upward shift of the d ‐band center, and accelerates electron‐transfer kinetics. Consequently, the C 60 ‐Nb 2 C/Nb 2 O 5 anode delivers a remarkable reversible capacity of 658.8 mAh g− 1 at 0.1 A g− 1 and excellent rate capability. The assembled C 60 ‐Nb 2 C/Nb 2 O 5 //activated carbon LIHC achieves a high energy density of 199.5 Wh kg− 1 , ranking among the highest values reported for MXene‐based LIHCs. This work elucidates a molecular‐mediated interfacial electronic engineering mechanism for tailoring charge‐storage behavior, providing a rational design strategy for advanced electrochemical energy‐storage systems.

  • Hybridized Flat Band-Assisted Photoresponse Enhancement in Superatomic Crystal Mg4C60

    by Minghong Li, Cong Wang, Qixing Wang, Hao Mei, Zhengkuan Deng, Erfa Sunzi, Huiyin Wu, Xizhe Wen, Xiaochen Hong, Alei Li, et al.

    The band structure critically determines the intrinsic photodetector performance. With a high density of states (DOS), favorable band configuration, and strong electronic correlations, flat-band physics offers promising perspectives for optoelectronic optimization. Here, we demonstrate a broadband photodetector based on Mg4C60 superatomic crystals, in which hybridization of C-2p and Mg-3s orbitals creates flat bands with a suitable semiconducting gap. Such hybridization produces a global off-Γ conduction band minimum (CBM) with a nearly flat dispersion of ∼50 meV and an indirect quasiparticle gap of ∼1.37 eV, yielding a pronounced photoresponse peak at 905 nm. Complementary optical measurements and theoretical calculations show that these flat bands promote the photodetection figures of merit in few-layer Mg4C60 devices, leading to excellent photoresponsivity of ∼7 A·W–1, detectivity of ∼8.1 × 109 Jones, noise equivalent power of ∼5.5 × 10–14 W·Hz–1/2, and external quantum efficiency of ∼950%, exceeding most carbon-based photodetectors. This work establishes a general strategy for high-performance optoelectronics via flat-band engineering in superatomic crystals.

  • Two-Dimensional Orthorhombic Molybdenum Boride Enabled by Selective Mo–Al Bond Cleavage in MoAlB

    by Zexiang He, Shuo Wang, Yan Sun, Mingao Chen, Wentao Fan, Yuxuan Zhang, Chunfeng Hu, Shitao Wu, Houyu Ma, Yiyong Mai, et al.

    Two-dimensional (2D) metal borides (MBenes) exhibit fascinating magnetic, electronic and catalytic properties, originating from the rich chemical bonding schemes of boron. However, the growth or exfoliation of 2D MBene remains extremely challenging due to the close minimal formation energy differences (<0.1 eV) among competing boride phase variations. Herein, we present a liquid-metal-mediated selective bond-breaking strategy that enables orthorhombic 2D MoB nanosheets from non-van der Waals MoAlB precursor. The interplay between gallium, MoAlB and molten salt introduces chemical-potential-driven cleavage of Mo–Al bonds and interlayer steric hindrance, suppressing the undesirable structural evolution to unreactive MoAl0.5B. The subsequent formation of soluble AlF63– species removes aluminum bilayer from MoAlB completely, generating layered MoB that can be readily exfoliated into crystalline 2D sheets with micrometer-scale dimensions and atomic thickness. The abundant exposed Mo–B sites facilitate Lewis acid–base interactions with electrolyte anions, enabling efficient tailoring of electrode–electrolyte interface chemistry. This optimized dense and uniform lithium deposition promotes anode-free Li metal batteries with 200-cycle stability and 2 C rate performance, opening new avenues for interphase-dominated energy storage.

  • Few-layer covalent-C 60 -network-stabilized bismuth nanoparticles for high-performance alkaline batteries

    by Hao Mei, Songlin Liu, Yuxuan Zhang, Minjuan Li, Hui Yu, Mingao Chen, Zhixuan Zhang, Zhenyu Xiao, Sheng Yang

    Few-layer C 60 -network-supported Bi composite delivers high specific capacity and excellent cycling stability, owing to its large specific surface area, rich mesoporous channels, enhanced OH − adsorption and robust anchoring effect.

  • Open Access

    Manipulating the Photoluminescence Pathway in Metal Nanoclusters by Atomic Structural Editing

    by Wentao Fan, Panpan Zhang, Paolo Samorì, Antonio Gaetano Ricciardulli, Sheng Yang

    Zero‐dimensional metal nanoclusters exhibit unique photoluminescence (PL) properties originating from their space confinement, discrete electronic structures and strong metal‐ligand interactions. The manipulation of PL pathways through atomic‐level structural editing remains a key scientific question. Gold‐copper nanoclusters, with their well‐defined atomic structures and tunable PL characteristics, offer an ideal platform to investigate this relationship. In this study, two structurally analogous metal nanoclusters, Au 18 Cu 5 (SAdm) 15 and Au 17 Cu 4 (SAdm) 15 are synthesized, to explore how atomic‐level structural modifications influence the PL mechanism. It is demonstrated that atomic structural editing alters the electronic coupling and the charge distribution, thereby shifting the emission mechanism from surface‐state‐dominated shell‐core relaxation in Au 18 Cu 5 (SAdm) 15 to core‐state‐dominated core‐shell relaxation in Au 17 Cu 4 (SAdm) 15 . This change effectively modulates PL pathways and affects the directionality of electron transition dipole moments in the nanoclusters, leading to modulated optical absorption properties. These findings deepen the understanding of the structure‐property relationships in metal nanoclusters and provide new insights into tailoring their optoelectronic properties through atomic‐level compositional control in spatially confined nanostructures.


  • Sn-doping induced lattice distortion and deep-red self-trapped exciton emission in 2D lead halide perovskites

    by Yiqiang Xiao, Qingjing Zeng, Wenjuan Ma, Di Wang, Yuyuan Lai, Zhiming Lin, Qi Zhang, Long Xu, Sheng Yang, Qixing Wang

    Sn-doped 2D perovskites exhibit robust deep-red self-trapped exciton emission centered at 690 nm. Our study proves that such emission originates from an intrinsic lattice-relaxed state rather than sub-gap defects.


  • Open Access

    On‐Surface Synthesis of Bismuth Monolayers through Ice‐Confined Redox Reactions

    by Zexiang He, Depeng Wang, Wentao Fan, Songlin Liu, Antonio Gaetano Ricciardulli, Haixia Zhong, Yiyong Mai, Paolo Samorì, Sheng Yang

    2D bismuth possesses a unique combination of properties, such as cryogenic‐free quantum spin Hall effects and intrinsic single‐element ferroelectricity, making it highly promising for next‐generation electronic devices. However, the synthesis of 2D bismuth via exfoliation or direct growth is hindered by the low structural anisotropy of bulk bismuth crystals. To address this challenge, we demonstrate an unprecedented ice‐confined bottom‐up strategy for growing 2D bismuth. This approach involves kinetically controlled nucleation in liquid nitrogen (‐196 °C), followed by redox‐driven anisotropic growth within the confined space between ice and aluminum surfaces at −20 °C. The surfactant‐free process yields solution‐processable crystalline 2D bismuth with micrometer‐scale lateral dimensions and atomic‐level thickness, where 72% of the sheets are 1–3 layers thick. Thanks to its oxophilic surfaces, the as‐grown 2D bismuth effectively captures CO 2 molecules and facilitates their conversion to *OCHO intermediates during electrochemical CO 2 reduction, leading to an excellent formate Faraday efficiency of 95.6%. Moreover, this versatile synthetic route can be extended to other functional 2D metals, including silver, copper, and tellurium, thereby opening new avenues for the design of advanced catalysis, electronics, and related technologies.