Hongxiang Kang
Research Subjects
Hongxiang Kang has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
Qiong Ma
Beijing Institute of Radiation Medicine, Beijing, China
11 shared publications- Yingwei Fan
Beijing Institute of Technology
8 shared publications Haiyang Sun
College of Information Engineering, Henan University of Science and Technology, Luoyang, China
4 shared publications- Qiong Ma
Beijing Institute of Radiation Medicine
4 shared publications Nan Yu
College of Information Engineering, Henan University of Science and Technology, Luoyang, China
3 shared publicationsChangke Wang
Beijing Institute of Radiation Medicine
2 shared publications
Latest Publications
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (1) , 199-204
A Remote Optical Fiber Dosimeter for Environmental Radiation Based on GAGG:Ce Radioluminescence
To monitor environmental radiation dose rates, a cerium-doped gadolinium gallium aluminum garnet (GAGG:Ce) fiber-coupled dosimeter was developed for the first time. The dosimeter utilized three optical fiber parameters: core diameter of 400μm with a length of 113m, core diameter of 400μm with a length of 1m, and core diameter of 1000μm with a length of 1m. Within the dose rate ranges of 0.1–998mGy/h, 0.04–980mGy/h, and 0.01–982mGy/h, all three optical fiber dosimeters exhibited linear responses. The net count rate variation coefficient of a single remote measurement experiment using the fiber dosimeter with a 400μm core diameter and 113m length at a dose rate of 200mGy/h was 0.56%, while the average variation coefficient from 10 repeated irradiation experiments was 0.76%. These results indicate that the remote optical fiber dosimeter achieved stable dose rate measurements from 0.1 to 998mGy/h at a distance of 113m. The GAGG:Ce optical fiber dosimeter met the requirements for remote real-time monitoring of environmental radiation dose rates.
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (1) , 199-204
A Remote Optical Fiber Dosimeter for Environmental Radiation Based on GAGG:Ce Radioluminescence
To monitor environmental radiation dose rates, a cerium-doped gadolinium gallium aluminum garnet (GAGG:Ce) fiber-coupled dosimeter was developed for the first time. The dosimeter utilized three optical fiber parameters: core diameter of 400μm with a length of 113m, core diameter of 400μm with a length of 1m, and core diameter of 1000μm with a length of 1m. Within the dose rate ranges of 0.1–998mGy/h, 0.04–980mGy/h, and 0.01–982mGy/h, all three optical fiber dosimeters exhibited linear responses. The net count rate variation coefficient of a single remote measurement experiment using the fiber dosimeter with a 400μm core diameter and 113m length at a dose rate of 200mGy/h was 0.56%, while the average variation coefficient from 10 repeated irradiation experiments was 0.76%. These results indicate that the remote optical fiber dosimeter achieved stable dose rate measurements from 0.1 to 998mGy/h at a distance of 113m. The GAGG:Ce optical fiber dosimeter met the requirements for remote real-time monitoring of environmental radiation dose rates.
- 24 September 2025
- Published by Walter de Gruyter GmbH in Reviews in the Neurosciences
- Vol. 37 (1) , 77-91
Mechanisms and parameters of photobiomodulation for neurological and neuropsychiatric disorders: whether and how to apply?
Neurological and neuropsychiatric disorders are among the leading causes of mortality and disability worldwide, with current treatment modalities including traditional therapies, psychological and supportive interventions, and emerging therapeutic approaches. Photobiomodulation (PBM), a neuromodulatory technique using lasers and light-emitting diodes (LEDs), has emerged as a promising intervention for enhancing brain function by stimulating neural activity, thereby protecting brain tissue and restoring function. Despite its widespread application, the precise mechanisms underlying the selection of critical parameters and their associated therapeutic effects remain incompletely understood. This systematic review synthesizes data from multiples studies over the past decade, investigating the effects of PBM on neurological and neuropsychiatric disorders, including traumatic brain injury (TBI), spinal cord injury (SCI), Alzheimer’s disease (AD), Parkinson’s disease (PD), generalized anxiety disorder (GAD), major depressive disorder (MDD), and healthy subjects. Emerging evidence suggests that the therapeutic mechanisms of PBM may involve enhanced energy metabolism, increased cerebral blood flow (CBF), modulation of oxidative stress, anti-inflammatory effects, neuroprotection and regeneration, enhanced synaptic plasticity, and regulation of resting-state brain networks. Regarding parameter selection, wavelength has emerged as a critical factor influencing penetration depth and the specific chromophore responsible for photon absorption and therapeutic efficacy. This review focuses on the characteristics of diverse wavelengths, as well as the roles of multiple chromophores and associated signaling pathways. Different irradiation modalities, including both non-invasive and invasive approaches, are examined, alongside optimal treatment windows for power and fluence. Additionally, less frequently addressed aspects, such as spot area and power density patterns, are considered.
- 24 September 2025
- Published by Walter de Gruyter GmbH in Reviews in the Neurosciences
- Vol. 37 (1) , 77-91
Mechanisms and parameters of photobiomodulation for neurological and neuropsychiatric disorders: whether and how to apply?
Neurological and neuropsychiatric disorders are among the leading causes of mortality and disability worldwide, with current treatment modalities including traditional therapies, psychological and supportive interventions, and emerging therapeutic approaches. Photobiomodulation (PBM), a neuromodulatory technique using lasers and light-emitting diodes (LEDs), has emerged as a promising intervention for enhancing brain function by stimulating neural activity, thereby protecting brain tissue and restoring function. Despite its widespread application, the precise mechanisms underlying the selection of critical parameters and their associated therapeutic effects remain incompletely understood. This systematic review synthesizes data from multiples studies over the past decade, investigating the effects of PBM on neurological and neuropsychiatric disorders, including traumatic brain injury (TBI), spinal cord injury (SCI), Alzheimer’s disease (AD), Parkinson’s disease (PD), generalized anxiety disorder (GAD), major depressive disorder (MDD), and healthy subjects. Emerging evidence suggests that the therapeutic mechanisms of PBM may involve enhanced energy metabolism, increased cerebral blood flow (CBF), modulation of oxidative stress, anti-inflammatory effects, neuroprotection and regeneration, enhanced synaptic plasticity, and regulation of resting-state brain networks. Regarding parameter selection, wavelength has emerged as a critical factor influencing penetration depth and the specific chromophore responsible for photon absorption and therapeutic efficacy. This review focuses on the characteristics of diverse wavelengths, as well as the roles of multiple chromophores and associated signaling pathways. Different irradiation modalities, including both non-invasive and invasive approaches, are examined, alongside optimal treatment windows for power and fluence. Additionally, less frequently addressed aspects, such as spot area and power density patterns, are considered.
- 20 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (10) , 3426-3432
A Radiation High-Dose Remote Optical Fiber Sensor Based on Al 2 O 3 :C Optically Stimulated Luminescence
The first exploration of a 120 m long-distance optical fiber radiation sensor for high-dose monitoring, the radiation sensor composed of a long optical fiber coupled with carbon-doped alumina (Al2O3:C), a photomultiplier tube (PMT), and a 520 nm laser was also investigated for remote environmental radiation monitoring. We evaluated the laser power density, signal integration time in continuous wave optically stimulated luminescence (CW-OSL) mode, repeatability and consistency of radiation dosimetry, fiber transmission characteristics, and thorough bleaching time after each measurement. Under optimized CW-OSL conditions, the remote fiber sensor achieved stable measurements within a dose range of 0.1-5 Gy at a distance of 120 m. The findings indicated that the Al2O3:C optical fiber sensor is suitable for post-accident dose assessment or industrial applications requiring high-dose monitoring.
- 20 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (10) , 3426-3432
A Radiation High-Dose Remote Optical Fiber Sensor Based on Al 2 O 3 :C Optically Stimulated Luminescence
The first exploration of a 120 m long-distance optical fiber radiation sensor for high-dose monitoring, the radiation sensor composed of a long optical fiber coupled with carbon-doped alumina (Al2O3:C), a photomultiplier tube (PMT), and a 520 nm laser was also investigated for remote environmental radiation monitoring. We evaluated the laser power density, signal integration time in continuous wave optically stimulated luminescence (CW-OSL) mode, repeatability and consistency of radiation dosimetry, fiber transmission characteristics, and thorough bleaching time after each measurement. Under optimized CW-OSL conditions, the remote fiber sensor achieved stable measurements within a dose range of 0.1-5 Gy at a distance of 120 m. The findings indicated that the Al2O3:C optical fiber sensor is suitable for post-accident dose assessment or industrial applications requiring high-dose monitoring.
- Open Access
- 11 July 2025
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 20 (7) , e0324327
Analysis of injured-skin SS-OCT images based on combined attention UNet
Optical coherence tomography (OCT) is a noninvasive imaging technique that provides high-resolution images of superficial skin tissues and has become widely used for diagnosing various skin disorders. Assessing laser-induced skin tissue damage is essential for understanding the healing mechanisms and optimizing treatment strategies. However, effectively quantifying skin damage and its correlation with laser dosage and recovery time poses a challenge. In this study, we established a laser-induced skin injury model in mice, utilizing 1 m–2 m laser wavelengths. We obtained SS-OCT images of the injury site under different laser doses and recovery times. To enhance image clarity, we applied noise reduction using the BM3D algorithm. We employed an improved UNet network model that incorporates SimAM and PSA modules, forming three attention mechanisms: TandemAT-UNet, ParallelAT-UNet, and NestedAT-UNet. These models were used to segment the damaged skin regions, followed by a 3D reconstruction method to quantitatively evaluate the volume of skin damage while analyzing changes about laser dose and recovery time.The BM3D algorithm effectively suppressed high-noise components, significantly improving image clarity. Among the three models, ParallelAT-UNet exhibited the best segmentation performance, achieving a Dice coefficient of 0.9364, mean Pixel Accuracy (mPA) of 92.67%, mean Intersection over Union (mIoU) of 96.31%, and an accuracy of 99.39%. Quantitative analysis revealed that laser doses between and caused minimal changes in skin damage volume, while doses ranging from to resulted in significant changes, which varied according to both the dose and recovery time. All groups showed signs of healing by 14 days post-laser treatment, with damage volumes smaller than the initial values. This study presents an efficient and reliable method for the quantitative assessment of laser-induced skin damage using OCT imaging. The findings demonstrate a strong relationship between laser dosage, recovery time, and skin damage, highlighting potential applications for noninvasive diagnosis and treatment monitoring using OCT.- 11 July 2025
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 20 (7) , e0324327
Open AccessAnalysis of injured-skin SS-OCT images based on combined attention UNet
Optical coherence tomography (OCT) is a noninvasive imaging technique that provides high-resolution images of superficial skin tissues and has become widely used for diagnosing various skin disorders. Assessing laser-induced skin tissue damage is essential for understanding the healing mechanisms and optimizing treatment strategies. However, effectively quantifying skin damage and its correlation with laser dosage and recovery time poses a challenge. In this study, we established a laser-induced skin injury model in mice, utilizing 1 m–2 m laser wavelengths. We obtained SS-OCT images of the injury site under different laser doses and recovery times. To enhance image clarity, we applied noise reduction using the BM3D algorithm. We employed an improved UNet network model that incorporates SimAM and PSA modules, forming three attention mechanisms: TandemAT-UNet, ParallelAT-UNet, and NestedAT-UNet. These models were used to segment the damaged skin regions, followed by a 3D reconstruction method to quantitatively evaluate the volume of skin damage while analyzing changes about laser dose and recovery time.The BM3D algorithm effectively suppressed high-noise components, significantly improving image clarity. Among the three models, ParallelAT-UNet exhibited the best segmentation performance, achieving a Dice coefficient of 0.9364, mean Pixel Accuracy (mPA) of 92.67%, mean Intersection over Union (mIoU) of 96.31%, and an accuracy of 99.39%. Quantitative analysis revealed that laser doses between and caused minimal changes in skin damage volume, while doses ranging from to resulted in significant changes, which varied according to both the dose and recovery time. All groups showed signs of healing by 14 days post-laser treatment, with damage volumes smaller than the initial values. This study presents an efficient and reliable method for the quantitative assessment of laser-induced skin damage using OCT imaging. The findings demonstrate a strong relationship between laser dosage, recovery time, and skin damage, highlighting potential applications for noninvasive diagnosis and treatment monitoring using OCT. - Open Access
- 29 November 2024
- Published by Slovenian Society for Stereology and Quantitative Image Analysis in Image Analysis and Stereology
- Vol. 43 (3) , 295-304
Automatic Assessment of OCT Skin Thickness in Mice Based on Transfer Learning and Attention Mechanisms
Optical coherence tomography (OCT) is characterized by high resolution and noninvasiveness; thus, it has been widely used to analyze skin tissues in recent years. Previous studies have evaluated skin OCT images using traditional algorithms with low accuracy for complex tissue structure images. Although a few studies have used deep learning methods to assess tissue structure in OCT images, they lack quantitative assess-ment of deeper skin tissue thickness and are limited to the epidermal layer. Thus, in the present study, we proposed an automated segmentation and quantitative evaluation method. The skin OCT images were first pre-processed, and the attention mechanism was added to U-Net based on transfer learning to segment the images and quantify the thickness of mouse skin tissue structure. The results showed that U-Net combined with the coordinate attention (CA) mechanism had better segmentation performance with 93.94% mean intersection of union (MIoU) value and 96.99% Dice similarity coefficient; the segmentation errors were 0.6 μm, 2.2 μm, 3.8 μm, and 6.0 μm for the epidermis layer, subcutaneous fat layer, muscle fascia layer, and the overall skin tissue structure of mice, respectively. The overall skin tissue thickness of the four mice were 235 ± 20 μm, 264 ± 42 μm, 275 ± 40 μm, and 774 ± 91 μm, respectively. The present study provides a rapid and accurate method for the automated measurement of skin tissue thickness.
- 29 November 2024
- Published by Slovenian Society for Stereology and Quantitative Image Analysis in Image Analysis and Stereology
- Vol. 43 (3) , 295-304
Open AccessAutomatic Assessment of OCT Skin Thickness in Mice Based on Transfer Learning and Attention Mechanisms
Optical coherence tomography (OCT) is characterized by high resolution and noninvasiveness; thus, it has been widely used to analyze skin tissues in recent years. Previous studies have evaluated skin OCT images using traditional algorithms with low accuracy for complex tissue structure images. Although a few studies have used deep learning methods to assess tissue structure in OCT images, they lack quantitative assess-ment of deeper skin tissue thickness and are limited to the epidermal layer. Thus, in the present study, we proposed an automated segmentation and quantitative evaluation method. The skin OCT images were first pre-processed, and the attention mechanism was added to U-Net based on transfer learning to segment the images and quantify the thickness of mouse skin tissue structure. The results showed that U-Net combined with the coordinate attention (CA) mechanism had better segmentation performance with 93.94% mean intersection of union (MIoU) value and 96.99% Dice similarity coefficient; the segmentation errors were 0.6 μm, 2.2 μm, 3.8 μm, and 6.0 μm for the epidermis layer, subcutaneous fat layer, muscle fascia layer, and the overall skin tissue structure of mice, respectively. The overall skin tissue thickness of the four mice were 235 ± 20 μm, 264 ± 42 μm, 275 ± 40 μm, and 774 ± 91 μm, respectively. The present study provides a rapid and accurate method for the automated measurement of skin tissue thickness.
- 6 July 2024
- Published by Elsevier in Journal of Luminescence
- Vol. 275
Mechanoluminescence from CaCl2:Eu2+
- 6 July 2024
- Published by Elsevier in Journal of Luminescence
- Vol. 275
Mechanoluminescence from CaCl2:Eu2+
- 18 April 2024
- Published by Springer Nature in Lasers in Medical Science
- Vol. 39 (1) , 1-11
Deep learning automatically assesses 2-µm laser-induced skin damage OCT images
The present study proposed a noninvasive, automated, in vivo assessment method based on optical coherence tomography (OCT) and deep learning techniques to qualitatively and quantitatively analyze the biological effects of 2-µm laser-induced skin damage at different irradiation doses. Different doses of 2-µm laser irradiation established a mouse skin damage model, after which the skin-damaged tissues were imaged non-invasively in vivo using OCT. The acquired images were preprocessed to construct the dataset required for deep learning. The deep learning models used were U-Net, DeepLabV3+, PSP-Net, and HR-Net, and the trained models were used to segment the damage images and further quantify the damage volume of mouse skin under different irradiation doses. The comparison of the qualitative and quantitative results of the four network models showed that HR-Net had the best performance, the highest agreement between the segmentation results and real values, and the smallest error in the quantitative assessment of the damage volume. Based on HR-Net to segment the damage image and quantify the damage volume, the irradiation doses 5.41, 9.55, 13.05, 20.85, 32.71, 52.92, 76.71, and 97.24 J/cm² corresponded to a damage volume of 4.58, 12.56, 16.74, 20.88, 24.52, 30.75, 34.13, and 37.32 mm³. The damage volume increased in a radiation dose-dependent manner.
- 18 April 2024
- Published by Springer Nature in Lasers in Medical Science
- Vol. 39 (1) , 1-11
Deep learning automatically assesses 2-µm laser-induced skin damage OCT images
The present study proposed a noninvasive, automated, in vivo assessment method based on optical coherence tomography (OCT) and deep learning techniques to qualitatively and quantitatively analyze the biological effects of 2-µm laser-induced skin damage at different irradiation doses. Different doses of 2-µm laser irradiation established a mouse skin damage model, after which the skin-damaged tissues were imaged non-invasively in vivo using OCT. The acquired images were preprocessed to construct the dataset required for deep learning. The deep learning models used were U-Net, DeepLabV3+, PSP-Net, and HR-Net, and the trained models were used to segment the damage images and further quantify the damage volume of mouse skin under different irradiation doses. The comparison of the qualitative and quantitative results of the four network models showed that HR-Net had the best performance, the highest agreement between the segmentation results and real values, and the smallest error in the quantitative assessment of the damage volume. Based on HR-Net to segment the damage image and quantify the damage volume, the irradiation doses 5.41, 9.55, 13.05, 20.85, 32.71, 52.92, 76.71, and 97.24 J/cm² corresponded to a damage volume of 4.58, 12.56, 16.74, 20.88, 24.52, 30.75, 34.13, and 37.32 mm³. The damage volume increased in a radiation dose-dependent manner.
- Open Access
A Preliminary Study on Quantitative Analysis of Collagen and Apoptosis Related Protein on 1064 nm Laser-Induced Skin Injury
To investigate the associated factors concerning collagen and the expression of apoptosis-related proteins in porcine skin injuries induced by laser exposure, live pig skin was irradiated at multiple spots one time, using a grid-array method with a 1064 nm laser at different power outputs. The healing process of the laser-treated areas, alterations in collagen structure, and changes in apoptosis were continuously observed and analyzed from 6 h to 28 days post-irradiation. On the 28th day following exposure, wound contraction and recovery were notably sluggish in the medium-high dose group, displaying more premature and delicate type III collagen within the newly regenerated tissues. The collagen density in these groups was roughly 37–58% of that in the normal group. Between days 14 and 28 after irradiation, there was a substantial rise in apoptotic cell count in the forming epidermis and granulation tissue of the medium-high dose group, in contrast to the normal group. Notably, the expression of proapoptotic proteins Bax, caspase-3, and caspase-9 surged significantly 14 days after irradiation in the medium-high dose group and persisted at elevated levels on the 28th day. During the later stage of wound healing, augmented apoptotic cell population and insufficient collagen generation in the newly generated skin tissue of the medium-high dose group were closely associated with delayed wound recovery.
Open AccessA Preliminary Study on Quantitative Analysis of Collagen and Apoptosis Related Protein on 1064 nm Laser-Induced Skin Injury
To investigate the associated factors concerning collagen and the expression of apoptosis-related proteins in porcine skin injuries induced by laser exposure, live pig skin was irradiated at multiple spots one time, using a grid-array method with a 1064 nm laser at different power outputs. The healing process of the laser-treated areas, alterations in collagen structure, and changes in apoptosis were continuously observed and analyzed from 6 h to 28 days post-irradiation. On the 28th day following exposure, wound contraction and recovery were notably sluggish in the medium-high dose group, displaying more premature and delicate type III collagen within the newly regenerated tissues. The collagen density in these groups was roughly 37–58% of that in the normal group. Between days 14 and 28 after irradiation, there was a substantial rise in apoptotic cell count in the forming epidermis and granulation tissue of the medium-high dose group, in contrast to the normal group. Notably, the expression of proapoptotic proteins Bax, caspase-3, and caspase-9 surged significantly 14 days after irradiation in the medium-high dose group and persisted at elevated levels on the 28th day. During the later stage of wound healing, augmented apoptotic cell population and insufficient collagen generation in the newly generated skin tissue of the medium-high dose group were closely associated with delayed wound recovery.
- Open Access
- 29 January 2024
- Published by MDPI AG in Preprints.org
Quantitative Analysis of Collagen and Apoptosis Related Protein on 1064 nm Laser-Induced Skin Injury
To investigate the associated mechanisms concerning collagen and the expression of apoptosis-related proteins in porcine skin injuries induced by laser exposure, pig skin was treated with a 1064 nm laser. The healing process of the laser-treated areas, alterations in collagen structure, and changes in apoptosis were continuously observed and analyzed from 6 hours to 28 days post-irradiation. On the 28th day following exposure, wound contraction and recovery were notably sluggish in the medium-high dose groups, displaying more premature and delicate type III collagen within the newly regenerated tissues. The collagen density in these groups was roughly 37-58% of that in the normal group. Between days 14 and 28 after irradiation, there was a substantial rise in apoptotic cell count in the forming epidermis and granulation tissue of the medium-high dose group, in contrast to the normal group. Notably, the expression of proapoptotic proteins bax, caspase-3, and caspase-9 surged significantly 14 days after irradiation in the medium-high dose groups and persisted at elevated levels on the 28th day. During the later stage of wound healing, the augmented apoptotic cell population and insufficient collagen generation in the newborn skin tissue of the medium-high dose groups were closely associated with delayed wound recovery.
- 29 January 2024
- Published by MDPI AG in Preprints.org
Open AccessQuantitative Analysis of Collagen and Apoptosis Related Protein on 1064 nm Laser-Induced Skin Injury
To investigate the associated mechanisms concerning collagen and the expression of apoptosis-related proteins in porcine skin injuries induced by laser exposure, pig skin was treated with a 1064 nm laser. The healing process of the laser-treated areas, alterations in collagen structure, and changes in apoptosis were continuously observed and analyzed from 6 hours to 28 days post-irradiation. On the 28th day following exposure, wound contraction and recovery were notably sluggish in the medium-high dose groups, displaying more premature and delicate type III collagen within the newly regenerated tissues. The collagen density in these groups was roughly 37-58% of that in the normal group. Between days 14 and 28 after irradiation, there was a substantial rise in apoptotic cell count in the forming epidermis and granulation tissue of the medium-high dose group, in contrast to the normal group. Notably, the expression of proapoptotic proteins bax, caspase-3, and caspase-9 surged significantly 14 days after irradiation in the medium-high dose groups and persisted at elevated levels on the 28th day. During the later stage of wound healing, the augmented apoptotic cell population and insufficient collagen generation in the newborn skin tissue of the medium-high dose groups were closely associated with delayed wound recovery.