Jie Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jie Li has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Zhian Zhang
Central South University
3 shared publications Hongliang Zhang
School of Metallurgy and Environment, Central South University, Changsha, People’s Republic of China
2 shared publicationsJunming Li
School of Metallurgy and Environment, Central South University, Changsha, 410083, PR China
2 shared publications- Liangxing Jiang
School of Metallurgy and Environment, Central South University, Changsha, China
2 shared publications - Shuai Yang
Central South University
2 shared publications - Yanqing Lai
Central South University
2 shared publications
Latest Publications
- 6 April 2018
- Published by Wiley in ChemSusChem
- Vol. 11 (8) , 1334-1343
Engineering Anisotropically Curved Nitrogen‐Doped Carbon Nanosheets with Recyclable Binary Flux for Sodium‐Ion Storage
As a low‐cost substitute of graphene and graphene derivatives, 2D carbon nanosheets are considered to be attractive materials for high‐performance electrochemical energy‐storage devices. Nevertheless, the lack of cost‐effective and green preparation methods still greatly impedes the application of 2D carbon nanosheets in sodium‐ion batteries. Herein, an environmental friendly and versatile strategy is proposed to engineer anisotropically curved nitrogen‐doped carbon nanosheets (CNCNs) derived from biosources with hydrosoluble and recyclable flux. After undergoing serious corrosion from the LiCl/KCl binary flux, the resulting CNCNs possess high structural stability. Notably, the CNCNs also possess a rational specific surface area, open porous structure, and abundant accessible edges, which can shorten the ion‐diffusion path, provide abundant accessible active sites, and result in less charge‐transfer impedance and excellent sodium‐ion diffusion coefficient (8.9×10−10 cm2 s−1). As a consequence, CNCN electrodes can deliver a high specific capacity of 361.6 mAh g−1 at 50 mA g−1. Such architecture provides a promising structural platform for the fabrication of 2D carbons for highly reversible and high capacity sodium‐ion batteries.
- 6 April 2018
- Published by Wiley in ChemSusChem
- Vol. 11 (8) , 1334-1343
Engineering Anisotropically Curved Nitrogen‐Doped Carbon Nanosheets with Recyclable Binary Flux for Sodium‐Ion Storage
As a low‐cost substitute of graphene and graphene derivatives, 2D carbon nanosheets are considered to be attractive materials for high‐performance electrochemical energy‐storage devices. Nevertheless, the lack of cost‐effective and green preparation methods still greatly impedes the application of 2D carbon nanosheets in sodium‐ion batteries. Herein, an environmental friendly and versatile strategy is proposed to engineer anisotropically curved nitrogen‐doped carbon nanosheets (CNCNs) derived from biosources with hydrosoluble and recyclable flux. After undergoing serious corrosion from the LiCl/KCl binary flux, the resulting CNCNs possess high structural stability. Notably, the CNCNs also possess a rational specific surface area, open porous structure, and abundant accessible edges, which can shorten the ion‐diffusion path, provide abundant accessible active sites, and result in less charge‐transfer impedance and excellent sodium‐ion diffusion coefficient (8.9×10−10 cm2 s−1). As a consequence, CNCN electrodes can deliver a high specific capacity of 361.6 mAh g−1 at 50 mA g−1. Such architecture provides a promising structural platform for the fabrication of 2D carbons for highly reversible and high capacity sodium‐ion batteries.
- 27 February 2018
- Published by Wiley in Chemnanomat
- Vol. 4 (4) , 379-386
Engraving Electrolyte and Ion‐Transport Tunnels in a Holey Carbon Nanosheet Array for Fast Sodium Ion Storage
2D carbon materials are considered as attractive electrode materials for sodium ion batteries. Nevertheless, there are major hurdles for the electrolyte as well as for Na+ to access a wall‐like 2D structure and a serious restack of the 2D structure. Herein, we report a unique design of a holey carbon nanosheet array (HCNA) with engraved electrolyte and ion‐transport tunnels. HCNA possesses a highly continuous network of opened channels and spaces, and the restack and agglomeration are greatly suppressed. Based on electrochemical analysis, HCNA displays fast charge transfer at the electrode‐electrolyte interface and excellent sodium ion diffusion kinetics with a high Na+ diffusion coefficient (5.5×10−9 cm2 s−1). As a result, HCNA electrodes deliver excellent high‐rate performance of 197.4 mAh g−1 after 1000 cycles at 500 mA g−1. Such an architecture provides a promising structural platform for the fabrication of 2D carbons for highly reversible and high‐capacity sodium ion batteries and other alkali metal ion energy storage systems.
- 27 February 2018
- Published by Wiley in Chemnanomat
- Vol. 4 (4) , 379-386
Engraving Electrolyte and Ion‐Transport Tunnels in a Holey Carbon Nanosheet Array for Fast Sodium Ion Storage
2D carbon materials are considered as attractive electrode materials for sodium ion batteries. Nevertheless, there are major hurdles for the electrolyte as well as for Na+ to access a wall‐like 2D structure and a serious restack of the 2D structure. Herein, we report a unique design of a holey carbon nanosheet array (HCNA) with engraved electrolyte and ion‐transport tunnels. HCNA possesses a highly continuous network of opened channels and spaces, and the restack and agglomeration are greatly suppressed. Based on electrochemical analysis, HCNA displays fast charge transfer at the electrode‐electrolyte interface and excellent sodium ion diffusion kinetics with a high Na+ diffusion coefficient (5.5×10−9 cm2 s−1). As a result, HCNA electrodes deliver excellent high‐rate performance of 197.4 mAh g−1 after 1000 cycles at 500 mA g−1. Such an architecture provides a promising structural platform for the fabrication of 2D carbons for highly reversible and high‐capacity sodium ion batteries and other alkali metal ion energy storage systems.
- 16 December 2015
- Published by Wiley in Chemnanomat
- Vol. 2 (3) , 196-200
Facile Synthesis of Nanostructured MnO2 as Anode Materials for Sodium‐Ion Batteries
Nanostructured MnO2 (including nanorods and nanoflowers) has been synthesized by a simple two‐step hydrothermal method and thermal treatment. When employed as anode materials for sodium‐ion batteries, MnO2 nanorods and nanoflowers demonstrate high initial sodium ion storage capacities of 427.4 and 487.8 mA h g−1, respectively, at a current density of 50 mA g−1. Compared with MnO2 nanorods, MnO2 nanoflowers achieved a much better electrochemical performance including good rate capability (103.3 mA h g−1 at 800 mA g−1 after 100 cycles) and superior cyclability (133.6 mA h g−1 at 400 mA g−1 after 1000 cycles). The good performance can be ascribed to the nanocrystalline nature and the three‐dimensional hierarchical architecture of MnO2 nanoflowers, which promotes the contact between MnO2 and electrolyte and shortens the electronic sodium ion pathway in the charge and discharge processes.
- 16 December 2015
- Published by Wiley in Chemnanomat
- Vol. 2 (3) , 196-200
Facile Synthesis of Nanostructured MnO2 as Anode Materials for Sodium‐Ion Batteries
Nanostructured MnO2 (including nanorods and nanoflowers) has been synthesized by a simple two‐step hydrothermal method and thermal treatment. When employed as anode materials for sodium‐ion batteries, MnO2 nanorods and nanoflowers demonstrate high initial sodium ion storage capacities of 427.4 and 487.8 mA h g−1, respectively, at a current density of 50 mA g−1. Compared with MnO2 nanorods, MnO2 nanoflowers achieved a much better electrochemical performance including good rate capability (103.3 mA h g−1 at 800 mA g−1 after 100 cycles) and superior cyclability (133.6 mA h g−1 at 400 mA g−1 after 1000 cycles). The good performance can be ascribed to the nanocrystalline nature and the three‐dimensional hierarchical architecture of MnO2 nanoflowers, which promotes the contact between MnO2 and electrolyte and shortens the electronic sodium ion pathway in the charge and discharge processes.
- 1 December 2015
- Published by Springer Nature in JOM
- Vol. 68 (2) , 623-634
Online Anode Current Signal in Aluminum Reduction Cells: Measurements and Prospects
- 1 December 2015
- Published by Springer Nature in JOM
- Vol. 68 (2) , 623-634
Online Anode Current Signal in Aluminum Reduction Cells: Measurements and Prospects
- 20 June 2014
- Published by Springer Nature in JOM
- Vol. 66 (7) , 1210-1217
Numerical Simulation of Alumina-Mixing Process with a Multicomponent Flow Model Coupled with Electromagnetic Forces in Aluminum Reduction Cells
- 20 June 2014
- Published by Springer Nature in JOM
- Vol. 66 (7) , 1210-1217
Numerical Simulation of Alumina-Mixing Process with a Multicomponent Flow Model Coupled with Electromagnetic Forces in Aluminum Reduction Cells
- 1 May 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (46) , 24020-24028
Novel phosphorus-doped PbO2–MnO2 bicontinuous electrodes for oxygen evolution reaction
We report a facile electrochemical approach for the fabrication of phosphorus-doped (P-doped) PbO2–MnO2 composite electrodes with a microporous bicontinuous structure. Modification of such structures was achieved by controlling the MnO2 incorporation during an anodic co-deposition process. The results indicate the anodic co-oxidation of Pb2+ and Mn2+ yielded a P–(PbO2–MnO2) deposit with a flat, compact and smooth surface. Meanwhile, the anodic composite deposition of Pb2+ and MnO2 particles resulted in the bicontinuous (P–PbO2)–MnO2 composite with a well-defined microporous morphology. Tafel and EIS were used to characterize their electrocatalytic performances for the oxygen evolution reaction in a typical anodic water-splitting process. The results indicate that such a novel bicontinuous (P–PbO2)–MnO2 composite anode exhibits significantly improved electrocatalytic activity as compared to the P–PbO2 and P–(PbO2–MnO2) anodes. The oxygen evolution kinetics and possible reaction mechanism are further described.
- 1 May 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (46) , 24020-24028
Novel phosphorus-doped PbO2–MnO2 bicontinuous electrodes for oxygen evolution reaction
We report a facile electrochemical approach for the fabrication of phosphorus-doped (P-doped) PbO2–MnO2 composite electrodes with a microporous bicontinuous structure. Modification of such structures was achieved by controlling the MnO2 incorporation during an anodic co-deposition process. The results indicate the anodic co-oxidation of Pb2+ and Mn2+ yielded a P–(PbO2–MnO2) deposit with a flat, compact and smooth surface. Meanwhile, the anodic composite deposition of Pb2+ and MnO2 particles resulted in the bicontinuous (P–PbO2)–MnO2 composite with a well-defined microporous morphology. Tafel and EIS were used to characterize their electrocatalytic performances for the oxygen evolution reaction in a typical anodic water-splitting process. The results indicate that such a novel bicontinuous (P–PbO2)–MnO2 composite anode exhibits significantly improved electrocatalytic activity as compared to the P–PbO2 and P–(PbO2–MnO2) anodes. The oxygen evolution kinetics and possible reaction mechanism are further described.
- 27 February 2014
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 18 (7) , 1833-1845
Dynamic analysis on metal selenide electrodeposition
- 27 February 2014
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 18 (7) , 1833-1845
Dynamic analysis on metal selenide electrodeposition