NHNur Hidayat

Nur Hidayat

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nur Hidayat has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    PENGEMBANGAN E-MODUL BERBASIS FLIP PDF CORPORATE EDITION PADA PEMBELAJARAN MEKANIKA TEKNIK 2 KELAS X DPIB

    by Nur Hidayat, Muhammad Surya Wijaya Kusuma, Rudi Nur Syamsudin, Indah Wahyuni, Dhian Fitri Asmarawati

    The limited relevance of existing teaching materials in Engineering Mechanics 2 and the low level of student engagement in the Building Modeling and Information Design Expertise Concentration at SMK Negeri 1 Seyegan present significant challenges in the learning process. The purpose of the research is to develop an interactive E-module to increase learning interest in the subject. The research uses the Research and Development (RnD) method with the ADDIE model (Analysis, Design, Development, Implementation, and Evaluation). Data were obtained through interviews and observations, then analyzed descriptively. Validation was carried out by material experts, media experts, and student responses. The validation results show that the E-module is suitable for use: material experts are included in the “Feasible” category, media experts are included in the “Very Feasible” category, and student responses to the content, language, graphics and usefulness aspects are included in the “Very Feasible” category. Thus, the developed Engineering Mechanics 2 E-module was declared suitable as a teaching material for teachers as well as a learning medium that increases learning interest for students. E-modules have the advantage of interactivity so that students can use them as independent learning media. ABSTRAK Penelitian ini dilaksanakan sebagai respon terhadap adanya keterbatasan media pembelajaran pada mata pelajaran Mekanika Teknik 2 yang dinilai belum sejalan dengan kemajuan teknologi, serta rendahnya minat belajar peserta didik Konsentrasi Keahlian Desain Pemodelan dan Informasi Bangunan di SMK Negeri 1 Seyegan. Tujuan utama penelitian adalah untuk mengembangkan e-modul interaktif yang dapat mendorong peningkatan minat belajar siswa pada mata pelajaran tersebut. Metode penelitian mengacu pada metode Research and Development (RnD) dengan mengacu pada model pengembangan ADDIE (Analysis, Design, Development, Implementation, dan Evaluation). Data diperoleh melalui wawancara dan observasi, kemudian dianalisis secara deskriptif. Validasi dilakukan oleh ahli materi, ahli media, serta respon peserta didik. Hasil validasi menunjukkan E-modul layak digunakan: ahli materi termasuk kategoti “Layak”, ahli media termasuk kategori “Sangat Layak”, serta respon peserta didik pada aspek isi, kebahasaan, kegrafikan dan kemanfaatan termasuk kategori “Sangat Layak”. Dengan demikian, E-modul Mekanika Teknik 2 yang dikembangkan dinyatakan layak sebagai bahan ajar bagi guru sekaligus media belajar yang meningkatkan minat belajar bagi peserta didik. E-modul mempunyai keunggulan dari sisi interaktivitas sehingga peserta didik dapat menggunakannya sebagai media pembelajaran mandiri.

  • Open Access

    Perkembangan Anak Usia Dini : Tinjauan Teoritis Perspektif Agama Islam

    by Akhmad Khoirurroziq, Muhammad Ulfi Fadli, Nur Kholis Hidayat

    Anak dilahirkan seperti kertas putih tanpa coretan. Dalam diri anak memiliki potensi-potensi yang harus dikembangkan termasuk potensi keagamaan. Agar mutiara yang indah dan bersih itu terjaga dari lukisan dan gambar yang kotor, maka salah satu upaya yang dilakukan adalah dengan memberikan pendidikan sejak anak usia dini. Bimbingan dari orang tua maupun dari pendidik lainnya sehingga akan tumbuh dan berkembang sesuai agama yang dianutnya. Penelitian ini bertujuan untuk mengetahui perkembangan anak usia dini spesifik meninjau melalui persepektif agama Islam. Jenis penelitian ini adallah library research dengan menggunakan analisis pengumpulan data dari journal, media internet dan buku-buku berkaitan dengan perkembangan agama pada anak usia dini. Hasil penetilian menunjukkan bahwa terdapat hal yang perlu diketahui oleh orang tua tentang fase perkembangan anak., dimana terdapat fase dongeng, fase kenyataan, dan fase individu. Selain itu, pembinaan agama  yang dapat dilakukan oleh orang tua terhadap anak dengan pembinaan agama yang bersifat secara langsung, kegiatan yang disesuian dengan kesenangan anak, pembinaan agama berdasar lingkungan, melakukan kunjungan ke tempat-tempat bersejarah dan pembinaan yang dilakukan secara terus menerus.


  • Open Access

    A framework for measuring the level of achievement of vocational students competency of architecture education

    by Valentinus Lilik Hariyanto, Rihab Wit Daryono, Nur Hidayat, Sutarto Hadi Prayitno, Muhammad Nurtanto

    The determination of work competence according to industrial needs that are expected by employers of new graduates in the department of architectural engineering in vocational high schools will help graduates to transit smoothly from the academic education environment to the real conditions of the construction industry in the workplace. This research identifies which group of competencies attributes that graduates should have in explaining appropriate competencies according to construction industry standards in Indonesia. The survey was conducted in 47 building construction companies consisting of 56 respondents using a questionnaire method. Multivariate analyses using the CB-SEM method used to validate the evaluation model. The research analysis used quantitative descriptive and factor analysis with the Explanatory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) methods. The EFA test shows ten factors so that it consists of 30 items of competency measurement. Overall, the CFA test has met the criteria for the goodness of fit statistics. The results of the study concluded that the instrument developed met good validity and reliability and two model frameworks for measuring the level of achievement of student competence in architectural techniques were feasible to use.


  • Open Access

    The Effect of Check Dam Stones Installation and Gabions with Combination Variations in River Bends Using a Laboratory Model Test

    by N Hidayat, D Purwantoro, Nur A Khoirudin

    Scour or landslide has been a frequent problem at river bends. The common protection for this area is an installation of check dam stones at 90° and gabions at 45° at the outer cliffs of the channel. This study aims at determining the effect of variations in the placement of check dam stones and gabions on river bends through an experimental test of the hydraulic model. It used a river model flume with a curve length of 5 m, a width of 0.8 m, a height of 0.5 m, and a constant flow rate of 7.07 lt/sec. Variation of placement was done twice with the first variation of 3 check dam stones, 4 gabions, 3 check dam stones, and the second variation of 3 gabions, 4 check dam stones, 3 gabions. The test results showed that the scour in variation 1 for STA 01 was −0.8 cm, STA 11 was −0.4 cm, STA 19 was −2.3 cm, respectively. The analysis results indicate that it is effective to use check dam stones for STA 00 to STA 07, gabions for STA 08 to STA 17, but STA 18 to STA 24 is not effective using check dam stones.


  • Open Access

    Persepsi dan Sikap Penyuluh Pertanian Kabupaten Gunungkidul terhadap Aplikasi Sistem Informasi Katam Terpadu

    by Rahima Kaliky, Supardi, Nur Hidayat

    Sektor pertanian masih diandalkan sebagai kontributor penting Produk Domestik Regional Bruto Daerah Istimewa Yogyakarta, padi merupakan komoditas pertanian penting, namun produksinya cenederung melandai. Perubahan iklim ekstrim menjadi salah satu factor penyebab kegagalan panen. Badan Litbang Pertanian telah menyediakan aplikasi Sistem Informasi Kalender Tanam Terpadu yang dapat memberikan informasi spasial dan tabular tentang teknologi budidaya tanaman padi berdasarkan prediksi variabilitas dan perubahan iklim pada level kecamatan. Penyuluh pertanian diharapkan menggunakan aplikasi tersebut untuk akses informasi teknologi budidaya padi, informasi iklim dan OPT kemudian meneruskannya kepada petani. Penelitian ini bertujuan untuk mengetahui persepsi, sikap, dan minat penyuluh di Kabupaten Gunungkidul terhadap aplikasi sistem informasi tersebut. Penelitian dilakukan dengan metode survey pada bulan September 2020 dan pengambilan sampel menggunakan metode acak sederhana, jumlah sampel 46 orang. Analisis data menggunakan statistic deskriptif dan disajikan dalam bentuk tabel dan grafik. Hasil penelitian menunjukan bahwa mayoritas penyuluh pertanian di Kabupaten Gunungkidul memiliki persepsi positif (60,88%) terhadap manfaat aplikasi tersebut dan sebanyak 66,85 % memiliki persepsi positif terhadap kemudahan penggunaannya. Sebagian besar penyuluh memiliki sikap postifif (>60%), dan 65,2% penyuluh berniat untuk menggunakan aplikasi tersebut secara berkelanjutan dalam mendukung peningkatan produksi dan produktivitas padi di Kabupaten Gunungkidul.


  • Open Access

    The Effect of PET Plastic Addition (Polyethylene Terephthalate) and Carbide Waste Filler for Asphalt Concrete-Binder Course (AC-BC) on Marshall Characteristics

    by N Hidayat, G N I P Pratama, I D Pramita

    To improve the quality of infrastructure that is durable and solid, innovation needed to make sure the high quality ofroads. This study aimed at knowing the effect of PET addition in the percentage of 0%, 1%, 1.5%, and 2% for asphalt concrete-binder course on Marshall characteristics, and revealing whether the results of Marshall testing with added PET material and carbide waste filler has fulfilled the general specification of Directorate General of Highway 2010. This study used PET plastic addition with variations of 0%, 1%, 1.5% and 2%. Each variation of PET content was made on 3 samples for objects testing to obtain values of density, VIM, VMA, VFA, stability, flow, and MQ. The results of this study indicated that the addition of PET plastic content and carbide waste filler affects the value of the asphalt characteristic of Marshall. The most effective addition was at 1% level with a density of 2.23 gr/cc, VIM value of 4.82%, VMA value of 14.58%, VFA value of 67.18%, flow value of 3.30 mm, stability value of 3060.42 kg and MQ value of 936.79 kg/mm. Overall, the addition of PET plastic and carbide waste filler to the characteristics of the marshall.


  • Open Access

    Kajian Keselamatan dan Kesehatan Kerja Bengkel di Jurusan Pendidikan Teknik Sipil dan Perencanaan Fakultas Teknik Uny

    by Nur Hidayat, Indah Wahyuni

    The objective of this study was to analyse: (1) the plan (2) the implementation, and (3) the evaluation of the Occupational Safety and Health (OSH) management in the workshop of the Department of Civil Engineering and Planning Education, Faculty of Engineering, Yogyakarta State University (YSU). This study was categorised into descriptive study that scientifically explained the workplace environment of the workshop specifically in terms of the OSH management. The data collection techniques used observations, interviews and questionnaires. The data of this study was analysed descriptively. This study presented the detailed descriptions of the collected data in the field. The results revealed (1) It is crucial to develop a more systematic OSH management plan in the workshop of the Department of Civil Engineering and Planning Education, Faculty of Engineering, YSU (2) the planning policies and the implementation of the OSH management need a continual improvement and (3) the evaluation of the OSH management should be conducted simultaneously by the stakeholders, the lecturers and the technicians. (4) The OSH policy in the practices should be properly organised to promote the OSH culture in the workshop. (5) The OSH management control and review were prioritised for fostering the effectiveness of the OSH management implementation.Penelitian ini bertujuan untuk mengetahui perencanaan, pelaksanaan, dan evaluasi Keselamatan dan Kesehatan Kerja (K3) di Bengkel Jurusan Pendidikan Teknik Sipil dan Perencanaan FT UNY. Penelitian ini merupakan penelitian deskriptif (descriptive reasearch) yang memaparkan secara ilmiah keadaan di lingkungan bengkel khususnya mengenai aspek K3. Metode pengumpulan data menggunakan observasi, wawancara, dan angket. Analisis data menggunakan analisis deskriptif. Penelitian ini mendeskripsikan secara detail terhadap apa yang ditemukan dalam pengambilan data. Hasil penelitian ini menunjukkan bahwa: (1) Perencanaan K3 di bengkel masih perlu diperbaiki agar lebih matang dan sistematis. (2) Pelaksanaan K3 di bengkel masih perlu ditingkatkan terkait dengan kebijakan perencanaan dan pelaksanaan. (3) Evaluasi K3 di bengkel perlu dilakukan secara simultan oleh pihak penentu kebijakan, dosen, dan teknisi. (4) Budaya K3 di bengkel masih perlu ditingkatkan dengan penetapan kebijakan mengenai K3 dalam proses pembelajaran praktik. (5) Faktor peninjauan dan peningkatan kinerja K3 perlu dilakukan untuk menjamin kesesuaian dan efektivitas penerapan sesuai Sistem Manajemen K3.