Monika Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Monika Singh has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Arti Joshi
Department of Chemistry Ilse Katz Institute for Nanoscale Science & Technology Ben-Gurion University of the Negev Beer Sheva 84105 Israel
11 shared publicationsHarshita Bagdwal
Institute of Nano Science and Technology Sahibzada Ajit Singh Nagar Punjab India
10 shared publicationsArshminder Kaur Dhillon
Department of Chemistry, Institute of Nano Science and Technology (INST), Mohali, Punjab 140306, India
7 shared publicationsParul Sood
Energy and Environment Unit Institute of Nano Science and Technology Knowledge City Sector-81, Mohali India
7 shared publications- Bhaskar Biswas
Laboratory for Structural Engineering and Sustainable Catalysis, Department of Chemistry, University of North Bengal, Darjeeling 734013, India
6 shared publications Ritu Ladhi
Institute of Nano Science and Technology, Knowledge City, Sector-81, Mohali-140306, Punjab, India
6 shared publications
Latest Publications
- 13 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (61) , 42397-42414
Self-sacrificial NBU-1 metal–organic framework-derived amorphous NiP 1.42 O x /C/C–N electrocatalyst for the oxygen evolution reaction
This work reports a scalable, air-stable NBU-1 MOF-derived amorphous NiP 1.42 O x /C/C–N OER electrocatalyst termed NBU-1500 obtained via one-step calcination without external dopants.
- 13 October 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (61) , 42397-42414
Self-sacrificial NBU-1 metal–organic framework-derived amorphous NiP 1.42 O x /C/C–N electrocatalyst for the oxygen evolution reaction
This work reports a scalable, air-stable NBU-1 MOF-derived amorphous NiP 1.42 O x /C/C–N OER electrocatalyst termed NBU-1500 obtained via one-step calcination without external dopants.
- 6 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (48)
Harnessing the Structural Dynamics of Polyoxometalates: Role of Active Phase Segregation for Water Oxidation
In situ surface reconstruction of Co‐polyoxometalates (Co‐POMs) has a significant influence on its electronic and structural properties during oxygen evolution reaction (OER). Therefore, depicting the role of POMs via tracking its electronic and structural framework evolution is crucial for resolving the true catalytic process. In this concern, a novel Keggin‐type POM [{CoW 12 O 40 (C 4 H 6 N 2 ) 2 (C 4 H 12 N) 3 (C 3 H 9 N)}.2H 2 O] (POM 1), (C 4 H 6 N 2 = 2‐methylimidazole, C 4 H 12 N = tetramethyl ammonium ion, and C 3 H 9 N = trimethylamine) is synthesized. Operando studies revealed the transformation of POM 1 (precatalyst) into r‐POM 1 during OER. As expected, r‐POM 1 exhibits outstanding activity in wide pH range. In addition, the reduced work function of in situ formed heterogeneous surface of r‐POM 1 indicates the formation of a built‐in electric field, beneficial for OER. Evolution of the active Co 3 O 4 phase in r‐POM 1 during OER owns to microstrain, resulting in improved electrochemical performance, whereas controlled Co 3 O 4 (pristine) has no strain in its crystal structure. To correlate the experimental findings, the computational calculations revealed lower hydroxylation energy in case of r‐POM 1 (−0.64 eV) as compared to POM 1 (4.5 eV). These combined findings offer compelling operando evidence of in situ active phase segregation during OER, resolving the mystery of POM being a precatalyst or heterogeneous catalyst.
- 6 May 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (48)
Harnessing the Structural Dynamics of Polyoxometalates: Role of Active Phase Segregation for Water Oxidation
In situ surface reconstruction of Co‐polyoxometalates (Co‐POMs) has a significant influence on its electronic and structural properties during oxygen evolution reaction (OER). Therefore, depicting the role of POMs via tracking its electronic and structural framework evolution is crucial for resolving the true catalytic process. In this concern, a novel Keggin‐type POM [{CoW 12 O 40 (C 4 H 6 N 2 ) 2 (C 4 H 12 N) 3 (C 3 H 9 N)}.2H 2 O] (POM 1), (C 4 H 6 N 2 = 2‐methylimidazole, C 4 H 12 N = tetramethyl ammonium ion, and C 3 H 9 N = trimethylamine) is synthesized. Operando studies revealed the transformation of POM 1 (precatalyst) into r‐POM 1 during OER. As expected, r‐POM 1 exhibits outstanding activity in wide pH range. In addition, the reduced work function of in situ formed heterogeneous surface of r‐POM 1 indicates the formation of a built‐in electric field, beneficial for OER. Evolution of the active Co 3 O 4 phase in r‐POM 1 during OER owns to microstrain, resulting in improved electrochemical performance, whereas controlled Co 3 O 4 (pristine) has no strain in its crystal structure. To correlate the experimental findings, the computational calculations revealed lower hydroxylation energy in case of r‐POM 1 (−0.64 eV) as compared to POM 1 (4.5 eV). These combined findings offer compelling operando evidence of in situ active phase segregation during OER, resolving the mystery of POM being a precatalyst or heterogeneous catalyst.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
Polyoxometalates as dynamic electron reservoirs: active catalyst towards electrochemical nitrate reduction
We synthesized a novel octamolybdate type POM based-solid [{Cu(pzc) 2 }Mo 8 O 26 ]·8H 2 O (Cu POM), which is a redox-active catalyst for nitrate hydrogenation and exhibit an appreciable F.E. and yield rate of 78.2% and 11.9 mg h cm −2 at −0.5 V vs. RHE.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
Polyoxometalates as dynamic electron reservoirs: active catalyst towards electrochemical nitrate reduction
We synthesized a novel octamolybdate type POM based-solid [{Cu(pzc) 2 }Mo 8 O 26 ]·8H 2 O (Cu POM), which is a redox-active catalyst for nitrate hydrogenation and exhibit an appreciable F.E. and yield rate of 78.2% and 11.9 mg h cm −2 at −0.5 V vs. RHE.
- Open Access
- 8 July 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 7 (16) , 4842-4847
A metal–organic framework with chiral nanochannels for enantioselective fluorescence switching of amino alcohols
A water-stable luminescent chiral 3-D Co-MOF, featuring a 41 helical chain and a nanosized channel structure, was utilized for the enantioselective detection of R- and S-valinol in aqueous medium with "turn-on and "turn-off" behavior respectively.
- 8 July 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 7 (16) , 4842-4847
Open AccessA metal–organic framework with chiral nanochannels for enantioselective fluorescence switching of amino alcohols
A water-stable luminescent chiral 3-D Co-MOF, featuring a 41 helical chain and a nanosized channel structure, was utilized for the enantioselective detection of R- and S-valinol in aqueous medium with "turn-on and "turn-off" behavior respectively.
- 27 May 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (24) , 14630-14636
A biomimetic Fe(iii)–metal–organic framework nanosphere-based dual modal probe for aqueous and intracellular sensing of nicotine and its metabolite cotinine
Novel FeIII MOF nanospheres were successfully developed for sensing nicotine and its primary metabolite, cotinine, in aqueous medium and living cells.
- 27 May 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (24) , 14630-14636
A biomimetic Fe(iii)–metal–organic framework nanosphere-based dual modal probe for aqueous and intracellular sensing of nicotine and its metabolite cotinine
Novel FeIII MOF nanospheres were successfully developed for sensing nicotine and its primary metabolite, cotinine, in aqueous medium and living cells.
- 22 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (11) , 7575-7582
Design of a Porous Silver Metal–Organic Cage with Accessible Ag(I) Active Sites for Enhanced Hydrogen Evolution Reaction in Alkaline Water
- 22 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (11) , 7575-7582
Design of a Porous Silver Metal–Organic Cage with Accessible Ag(I) Active Sites for Enhanced Hydrogen Evolution Reaction in Alkaline Water
- Open Access
- 1 May 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (5)
“Rust to Riches”: Harnessing iron-oxide-Zr MOF hybrid composite for enhanced oxygen evolution reaction under low pH
Energy consumption has become a critical global challenge, demanding innovative and sustainable solutions. Consequently, there is an increasing demand for efficient and durable electrocatalyst synthesis that can replace expensive noble metal-based catalysts for water-splitting reactions. In this context, we have successfully synthesized a composite material combining a Zr-based metal–organic framework (MOF), UIO-66-NH2, with Fe2O3 derived from rust—a discarded waste material. The synergistic interaction between MOF and Fe2O3 enhances the catalytic performance by effectively combining the structural advantages of the MOF with the active sites provided by Fe2O3. The results indicated that the composite was active with an overpotential of 209 mV at 10 mA/cm2 compared to the pristine MOF. Moreover, the composite demonstrated long-term durability for more than 9 h under harsh acidic conditions, outperforming many conventional catalysts in terms of stability, efficiency, and cost-effectiveness. By transforming waste materials into high-performance composites, this work presents a sustainable approach to addressing the energy crisis, offering a cost-effective and environmentally friendly solution to meet the growing energy demands.
- 1 May 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (5)
Open Access“Rust to Riches”: Harnessing iron-oxide-Zr MOF hybrid composite for enhanced oxygen evolution reaction under low pH
Energy consumption has become a critical global challenge, demanding innovative and sustainable solutions. Consequently, there is an increasing demand for efficient and durable electrocatalyst synthesis that can replace expensive noble metal-based catalysts for water-splitting reactions. In this context, we have successfully synthesized a composite material combining a Zr-based metal–organic framework (MOF), UIO-66-NH2, with Fe2O3 derived from rust—a discarded waste material. The synergistic interaction between MOF and Fe2O3 enhances the catalytic performance by effectively combining the structural advantages of the MOF with the active sites provided by Fe2O3. The results indicated that the composite was active with an overpotential of 209 mV at 10 mA/cm2 compared to the pristine MOF. Moreover, the composite demonstrated long-term durability for more than 9 h under harsh acidic conditions, outperforming many conventional catalysts in terms of stability, efficiency, and cost-effectiveness. By transforming waste materials into high-performance composites, this work presents a sustainable approach to addressing the energy crisis, offering a cost-effective and environmentally friendly solution to meet the growing energy demands.
- 5 February 2025
- Published by Wiley in Chemnanomat
- Vol. 11 (3)
Ultrathin 2D Co‐MOF Showcasing Remarkable Electrocatalytic Oxygen Evolution Coupled with Unparalleled Stability
Oxygen Evolution Reaction (OER) is typically carried out utilizing noble metals and metal oxides based nanostructures. Yet, due to their numerous drawbacks, including high cost, poor stability and negative environmental effects; researchers are driven to create new electro‐active materials. To that end, we report an ultrathin 2D Co‐MOF [Co2(bpe)2.5(NO3)4(CH3O)] (Co‐MOF) that crystallized under hydrothermal conditions, showing a terrific OER activity with an overpotential of 267 mV at the current density of 10 mA cm−2 and the low Tafel slope value of 104 mV dec−1. Two‐dimensional MOFs offer numerous advantages over 3D MOFs such as better exposure and accessibility of active sites. The layered structure of 2D MOFs can provide greater structural flexibility, which can be beneficial for accommodating the changes during the OER process and maintaining structural integrity under operating conditions. The performance of Co‐MOF surpasses commercially available OER catalyst RuO2, demonstrating an unprecedented prolonged stability of 112 hours, which, to the best of our knowledge, represents the longest stability, observed for any pristine MOF to date. From the post‐OER characterization, it was discovered that in situ formed species, Co(OH)2 and CoOOH served as the active sites responsible for oxygen evolution.
- 5 February 2025
- Published by Wiley in Chemnanomat
- Vol. 11 (3)
Ultrathin 2D Co‐MOF Showcasing Remarkable Electrocatalytic Oxygen Evolution Coupled with Unparalleled Stability
Oxygen Evolution Reaction (OER) is typically carried out utilizing noble metals and metal oxides based nanostructures. Yet, due to their numerous drawbacks, including high cost, poor stability and negative environmental effects; researchers are driven to create new electro‐active materials. To that end, we report an ultrathin 2D Co‐MOF [Co2(bpe)2.5(NO3)4(CH3O)] (Co‐MOF) that crystallized under hydrothermal conditions, showing a terrific OER activity with an overpotential of 267 mV at the current density of 10 mA cm−2 and the low Tafel slope value of 104 mV dec−1. Two‐dimensional MOFs offer numerous advantages over 3D MOFs such as better exposure and accessibility of active sites. The layered structure of 2D MOFs can provide greater structural flexibility, which can be beneficial for accommodating the changes during the OER process and maintaining structural integrity under operating conditions. The performance of Co‐MOF surpasses commercially available OER catalyst RuO2, demonstrating an unprecedented prolonged stability of 112 hours, which, to the best of our knowledge, represents the longest stability, observed for any pristine MOF to date. From the post‐OER characterization, it was discovered that in situ formed species, Co(OH)2 and CoOOH served as the active sites responsible for oxygen evolution.
- 28 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (6) , 9351-9363
Operando Electro-Oxidation Reconstitution of a Newly Designed 2D Co(II)-MOF on Nickel Foam to Cobalt Oxyhydroxide Nanosheets towards Energy Sustainability: A Holy Grail in Electrocatalytic Water Splitting
The upsurging of cost-effective de novo electrocatalysts through the operando electro-oxidation approaches holds great promise for the scalable production of green energy in the pursuit of energy sustainability. This work introduces an operando electro-oxidation reconstitution strategy in producing a smart electrocatalyst, cobalt "oxyhydroxide" derived from a newly designed 2D cobalt(II) metal-organic framework (NBU-4) directly grown on nickel foam (NF), NBU-4/NF@CoOOH. The electrocatalyst, NBU-4/NF@CoOOH, exhibits an outstanding overpotential of 76 mV for the hydrogen evolution reaction and 336 mV for the oxygen evolution reaction to achieve a current density of 10 mA/cm2 with remarkable Faradaic efficiencies of 97.1 and 93.4%, respectively, in 1 M aqueous KOH. Unveiling the bifunctionality of NBU-4/NF@CoOOH as the cathode and anode for overall water splitting in 1 M aqueous KOH, a low voltage of 1.65 V was needed to obtain 10 mA/cm2 current density. Nonetheless, NBU-4/NF@CoOOH displayed excellent stability for 12 h as evidenced from the chronopotentiometry recorded at 10 mA/cm2. The outstanding bifunctional electrocatalytic performance and stability of the electrocatalyst for 50 h is attributed to the unique 2D hexagonal nanosheet morphology of NBU-4/NF@CoOOH and the microporous structure with zigzag flow channels of NF, facilitating a faster kinetics through the Co3+ and Ni2+ dual sites synergism.
- 28 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (6) , 9351-9363
Operando Electro-Oxidation Reconstitution of a Newly Designed 2D Co(II)-MOF on Nickel Foam to Cobalt Oxyhydroxide Nanosheets towards Energy Sustainability: A Holy Grail in Electrocatalytic Water Splitting
The upsurging of cost-effective de novo electrocatalysts through the operando electro-oxidation approaches holds great promise for the scalable production of green energy in the pursuit of energy sustainability. This work introduces an operando electro-oxidation reconstitution strategy in producing a smart electrocatalyst, cobalt "oxyhydroxide" derived from a newly designed 2D cobalt(II) metal-organic framework (NBU-4) directly grown on nickel foam (NF), NBU-4/NF@CoOOH. The electrocatalyst, NBU-4/NF@CoOOH, exhibits an outstanding overpotential of 76 mV for the hydrogen evolution reaction and 336 mV for the oxygen evolution reaction to achieve a current density of 10 mA/cm2 with remarkable Faradaic efficiencies of 97.1 and 93.4%, respectively, in 1 M aqueous KOH. Unveiling the bifunctionality of NBU-4/NF@CoOOH as the cathode and anode for overall water splitting in 1 M aqueous KOH, a low voltage of 1.65 V was needed to obtain 10 mA/cm2 current density. Nonetheless, NBU-4/NF@CoOOH displayed excellent stability for 12 h as evidenced from the chronopotentiometry recorded at 10 mA/cm2. The outstanding bifunctional electrocatalytic performance and stability of the electrocatalyst for 50 h is attributed to the unique 2D hexagonal nanosheet morphology of NBU-4/NF@CoOOH and the microporous structure with zigzag flow channels of NF, facilitating a faster kinetics through the Co3+ and Ni2+ dual sites synergism.